So.... Been playing with this for the last two days trying to root this phone.
I've rooted a few other phones, so I do have experience with the overall process, but I am unable to even boot this phone into Recovery. I have tried booting into recovery by holding down both volume buttons + power and from adb terminal "adb reboot recovery."
Neither method works. The phone will boot (or reboot from adb) and brings up the "at&t World Phone" screen and then nothing else appears. The first time I tried this it actually wouldn't boot up even after pulling the battery and trying to start normally, it still sat at the same screen. I let it sit all day today at the screen until the battery died. I was finally able to get it to boot up earlier.
If anyone can help, that'd be greatly appreciated. Let me know what info I need to add.
I usually just press and hold both volume buttons and power then release just the power button and keeping the volume buttons still pushed on the 2nd time the white at&t screen pops up... Works for me every time.
Sent from my SAMSUNG-SGH-I897 using XDA App
hold volume up+down and power key btw this is wrong section to post supposed to be in general
Oh sorry, didn't realize it was supposed to be posted in general.
I've tried the Volume Up/Down + Power and this does not work, as I stated originally.
I've also tried to do it from the adb shell, which also does not work.
Does anyone have any idea why I can't access recovery?
I"m having a similar issue. Holding volume up+down and power and releasing in any combination just boots the phone up. If I just hold volume up+down and power the phone alternates between the AT&T World Phone screen endless.
Yes u have to let go of the pwr button when the phone screen turns on
Sent from my SAMSUNG-SGH-I897 using XDA App
I've tried just about every combination of the Volume Up/Down + Power and no luck.
I've also tried the following ADB commands, with no luck, it just reboots the phone:
adb reboot recovery
adb reboot-boatloader
When I hold Volume Down + Power I get the a Yellow Triangle with a Android guy with a shove with the text "Downloading... Do not turn off Target!!!"
When I hold Volume Up + Power I get an Android guy with the following text: "POWER RESET or UNKNOWN UPLOAD MODE"
For kicks, I tried to to flash a rooted update.zip via the Volume Down + Power way with the Samsung update software, the same way I have done with the Samsung Moment. Wasn't sure if it'd work, but worth a try.
Any one else have any ideas or suggestions?
Phishie, do you have a final release version? Or anything special about the phone you have?
I just press the two volume buttons first (to make sure theyre pressed before you hit power), then press the power button, as soon as the screen turns on, I let go of everything and it works just fine, no need to have ridiculously complicated instructions.
The trick is to make sure both volume buttons are pressed BEFORE you hit power. Then release. Easy as pie
Also, if you guys are having too much trouble, just download the one click root/unroot. It will run, boot your phone into recovery, then all you have to do is scroll to install packages with volume key and hit power. Done.
Trust me, I am making sure I'm pretty the keys completely. I've literally tried it fifty times by now.
And I've also tried the One Click Root. This does not boot the phone into recovery either. It just sits at the AT&T World Phone screen forever and will actually get stuck here and will not boot up normal even by pulling the battery and powering it back up. It'll just get stuck at the for-mentioned screen. I have to connect it to adb and reboot it there to get it out of the loop it's stuck in.
that doesnt sound good. Maybe you need to try a factory reset? are you running stock rom and everything?
When I first got the phone I did a factory reset.
Yea, it's completely stock to my knowledge. But I have a different ROM than the final release version that everyone else has. This is a pre-production device.
same problem
I try all the combos as well, no luck, would the combos be different for 2e vs 3e recovery?
I try combo, it powers on, the same thing happens, the at-t comes up, goes for a second, then screen brightens, wait a bit and then the home row buttons light up, hangs there... doesnt matter which kernel or which rom I flash, same thing, adb and other stuff wont work as they need usb debugging enabled, which mine isn't.
Is there a way to mod the phone files and flash to enable usb debugging? Anyway to remap the buttons to 2 button vs 3 button?
Everyone post your methods for entering recovery please?
Related
I was upgrading to Cog 9.1 using 2e recovery and I think my captivate is now bricked. It does not display anything (only black screen). Even after connecting to USB I do not see the battery charging symbol. Is there anyway out of this mode?
I have tried all the different key combos to try to get into download mode. I could always get into download mode earlier using down button + power button combo.
Any pointer will be very helpful.
How did you flash, and when did you realize there was an issue
Captivate
Cog 2.2
I flashed using ROM manager and I realised the issue after the screen remained black for around 30 mins.
sag.misc said:
I was upgrading to Cog 9.1 using 2e recovery and I think my captivate is now bricked. It does not display anything (only black screen). Even after connecting to USB I do not see the battery charging symbol. Is there anyway out of this mode?
I have tried all the different key combos to try to get into download mode. I could always get into download mode earlier using down button + power button combo.
Any pointer will be very helpful.
Click to expand...
Click to collapse
the volume buttons and power combo are used to put it in recovery. Mine got stuck on the at&t logo. I pulled the battery after about 40 minutes, turned it on into recovery, wiped my data, rebooted, then worked flawlessly. My advice -> pull battery, put it back in, hold volume buttons, then connect the usb while continuing to hold up/down volume buttons, this should get you into download mode.
sag.misc said:
I could always get into download mode earlier using down button + power button combo.
Any pointer will be very helpful.
Click to expand...
Click to collapse
This sounds like i9000 rom button combo. Won't work with COG. For recovery hold both volume buttons and hold power button in. When at&t logo shows up, wait about a second and release the power button but continue to hold the vol. buttons. Should get you there.
For download, hold volume buttons down and plug in usb. Should put ya right there.
If you have a cappy that has the no buttons bug, you're pretty much hosed.
Designgears has a thread in the development section about the 3 button issue, with a mod that fixes it. Give it a read.
If you had usb debugging enabled and the computer sees the phone, you should be able to use adb to reboot recovery or download too.
I have read over and over again that you hold down both volume buttons, and the power button, and it'll boot into recovery - but it's never worked for me. Last night, by accident, I let go of the 'up' volume button, only the 'down' was down along with the power button and low and behold - recovery mode. Is this proper procedure maybe only for certain phones? I was so frustrated, all that would happen with three buttons held down is the AT&T logo screen would flash on and off. I guess I'm just looking for affirmation here.
reinbeau said:
I have read over and over again that you hold down both volume buttons, and the power button, and it'll boot into recovery - but it's never worked for me. Last night, by accident, I let go of the 'up' volume button, only the 'down' was down along with the power button and low and behold - recovery mode. Is this proper procedure maybe only for certain phones? I was so frustrated, all that would happen with three buttons held down is the AT&T logo screen would flash on and off. I guess I'm just looking for affirmation here.
Click to expand...
Click to collapse
It's always been a fickle thing for me. I just use ADB for recovery.
Turn on USB Debugging, open cmd prompt in Windows, navigate to where you have android\tools, then adb reboot recovery
I prefer it because it is reliable. I know I can do hardware keys to recovery but I always seem to require 3 or 4 tries before I can pull it off right.
Thank you - I'm definitely going to have to get more familiar with ADB. I have it set up, but I've never used it. Reliability is what I want, I really don't like the panic attacks in the middle of a ROM install!
Let GO
I think you missed an important step of the process of getting into recovery.
After you see the AT&T screen the 2nd time, LET GO of the power button.
Some phones are quirky about which button to let go of, and according to some posts, european builds do it with just one volume button and the power button. (I think)
Anyway, glad you got there, but be sure to let go of the power button next time.
Out of curiosity, does download mode work?
I can get into download mode with Odin no problem, but not with just the buttons, unless I'm doing that wrong, too.
I did try letting go of the power button, but all that did was boot the phone.
These things are so tricky, and the panic swells when it doesn't work and you're trying to flash a ROM for only the second time in your life!
I know the feeling... when your heart starts racing in your chest..
Been there.
reinbeau said:
I have read over and over again that you hold down both volume buttons, and the power button, and it'll boot into recovery - but it's never worked for me. Last night, by accident, I let go of the 'up' volume button, only the 'down' was down along with the power button and low and behold - recovery mode. Is this proper procedure maybe only for certain phones? I was so frustrated, all that would happen with three buttons held down is the AT&T logo screen would flash on and off. I guess I'm just looking for affirmation here.
Click to expand...
Click to collapse
Affirmative!!!
Hello everyone,
I cant use the 3 button combo at all to get to recovery mode. I've done the "Down Vol., Home, and Power" before and it worked. However, i am not able to get to it after i flashed Bionix-v 1.2, and 1.3. I pretty sure its not because of the ROM, but i just can't figure it out WHAT! I've tried the "Vol. UP, Down, Power" as well, but still not luck. Please help!
Thanks,
Yahase
yahase said:
Hello everyone,
I cant use the 3 button combo at all to get to recovery mode. I've done the "Down Vol., Home, and Power" before and it worked. However, i am not able to get to it after i flashed Bionix-v 1.2, and 1.3. I pretty sure its not because of the ROM, but i just can't figure it out WHAT! I've tried the "Vol. UP, Down, Power" as well, but still not luck. Please help!
Thanks,
Yahase
Click to expand...
Click to collapse
Turn your phone off, and plug in the USB cable. That worked for me.
While your phone is switcher off, press and hold both the Up and Down buttons in the volume. And then plug in the USB.
Sent from my SAMSUNG-SGH-I897 using XDA App
I tried up down vol. With usb still didnt work. Btw im using vibrant.
Sent from my SGH-T959 using Tapatalk
So here is the situation:
My power button is non-functional. This happened before, and I was able to press very firmly on the power button to access a shut down menu and turn off the phone. From this, I was able to enter download mode (pressing volume button while inserting USB) and go back to stock, which surprisingly, fixed my power button. I thought this nightmare was over.
Now, my power button has stopped working again (ICS hacksung 5.0). No matter how much pressing, prodding, whatever, I cannot get the power button to turn off the phone.
I cannot find any adb commands to turn off phone.
"adb reboot download" simply restarts the phone, no download mode. (adb does recognize the device)
If I take out the battery, as soon as I put it in the phone boots up.
If I am pressing any of the volume buttons when I put the battery in, I can access recovery mode (But cannot select anything because power button is still broken)
Any ideas? I doubt my phone is still under warranty (1.4 years old) and I do not have mobile insurance.
Thanks for any help in advance
Depending on what recovery u have (cwm or ?), U can use the capacitive buttons, while in that revovery, to navigate and select the power off option.
Sent by XDA Premium App
Thats a neat tip that I didn't know about, but I can't find any option to power off? Sorry for being retarded but I have given this time I promise
cwm recovery is what I have installed atm
Reboot to CWM and Power off option may be at the bottom of the 1st screen that u come to. That is dependent on what version of cwm u have though.
Quick boot from the market, you can place a poweroff button directly on the home screen
Sent from my SAMSUNG-SGH-I897 using xda premium
The ICS ROMS CWM recovery doesn't have power off choice, so he can't do that.
Sent from my SGH-I897 using xda premium
Unfortunately the quick boot "power off" option simply froze my phone, or restarted it.
I let my battery drain so that I could get a dead phone (that part worked), but when I hold my volume buttons and plug in the USB for download mode it goes to the "battery" screen or (if both are held down) recovery. No download mode.
In recovery "key test" the power button fails to register any key press, but it is not spamming either. This seems like a hardware problem, but I am not sure how it was fixed when I flashed back to stock before if that is the case
I will next try making a download mode jig, I'll let you guys know how it goes...
My cousin had the exact same problem less than a month ago.
I see you tried reboot download through adb, have you tried it using the same command, but using android emulator from market? That worked for her phone so worth a shot.
its a far shot but odin is now available for use on the phone itself and works on our phones. maybe you can find a kernel thats had the buttons reconfigured. i know darky has one somewhere.
StaticMatt said:
My cousin had the exact same problem less than a month ago.
I see you tried reboot download through adb, have you tried it using the same command, but using android emulator from market? That worked for her phone so worth a shot.
Click to expand...
Click to collapse
Thanks for this idea, when I use
#su
#reboot download
the phone simply reboots. Same thing happens in "Quick Boot" 's "Bootloader" reboot option. This phone just seems broke as hell.
Firstly, this power button problem is a lot more common than you would think. It is most often a hardware failure - I mean the button mechanism (springs etc. just dies). Google it to see how common.
Your post suggests a clue: If just putting the battery in reboots the phone, then the power button may be stuck in the "in" position.....so it is always getting "pushed". Then anything you do would mean ht epower button is already being pressed. If this is the case, you will never get a software solution ???
Also, I absolutely do not mean to be nasty. But if you search both Q&A and General sections there are previous threads with this button problem. Many other solutions have been posted and it will be difficult to list them together.
Finally, you can actually replace - yes, replace - the button yourself. Google/you tube has it.
http://www.globaldirectparts.com/Samsung-Captivate-i897-Replacement-Repair-Parts-s/6412.htm
http://forum.xda-developers.com/showthread.php?t=1206459
Hope this helps !
Power everything was working this morning
Noticed that my power button wasn't working...the screen stayed on. Pulled battery, put it back in and the phone booted without pressing power.
Was like "wtf?"
When it booted, I couldn't turn off the screen.
So I just left the battery out and took it home.
Put a new rom on phone, thought "This will fix it."
Wrong.
Had to flash using Rom Manager because in recovery the power button doesn't respond.
When it began to boot "AT&T Screen" wouldn't disappear and show me some Doc's v4.
I can manipulate it to boot into recovery but the power button doesn't work still.
I can NOT get it to go into recovery.
Can someone helps me?
bunnsguy said:
Power everything was working this morning
Noticed that my power button wasn't working...the screen stayed on. Pulled battery, put it back in and the phone booted without pressing power.
Was like "wtf?"
When it booted, I couldn't turn off the screen.
So I just left the battery out and took it home.
Put a new rom on phone, thought "This will fix it."
Wrong.
Had to flash using Rom Manager because in recovery the power button doesn't respond.
When it began to boot "AT&T Screen" wouldn't disappear and show me some Doc's v4.
I can manipulate it to boot into recovery but the power button doesn't work still.
I can NOT get it to go into recovery.
Can someone helps me?
Click to expand...
Click to collapse
have ODIN open, and battery removed from phone... hook up usb, hold both vol keys, while inserting battery... you should get download mode fine even with a busted power button... what you do next is up to u....
Once more, I can NOT get it to boot into recovery in that fashion.
I cannot place batter in the phone without it attempting to boot
(doesn't not get past the AT&T boot screen)
I cannot plug it up, hold volume buttons and then put in battery because it will just charge. If I unplug the phone, the phone still thinks it's charging actually.
My question really is Can I 'fix' the power button, or can I reboot it into download mode through command propt? I've never used ADB to access my phone, so that'll be new.
bunnsguy said:
Once more, I can NOT get it to boot into recovery in that fashion.
I cannot place batter in the phone without it attempting to boot
(doesn't not get past the AT&T boot screen)
I cannot plug it up, hold volume buttons and then put in battery because it will just charge. If I unplug the phone, the phone still thinks it's charging actually.
My question really is Can I 'fix' the power button, or can I reboot it into download mode through command propt? I've never used ADB to access my phone, so that'll be new.
Click to expand...
Click to collapse
Dude... recovery is useless right now, you have a busted power button... and because of 'said busted power button', none of what you're trying to do is going to work... like youve said...
You are down to trying to force download mode with USB cord, holding the vol keys, and inserting the battery... ADB cannot run commands to a phone stuck at the boot screen... Thread title says, how to reboot to download, and with the button like it is, all you can do is what i've posted...
As to fixing the power button, i don't see why that's not possible... do u feel it press at all?
B-Naughty said:
As to fixing the power button, i don't see why that's not possible... do u feel it press at all?
Click to expand...
Click to collapse
Yeah, it 'presses' and 'clicks'. I mean it worked most of the day, it got low on power and it just quit working.
Any luck forcing download by puttin the battery in while the usb is hooked up with the vol keys pressed in?
I was having the same problem with my power button and eventually the power button stopped working completely even though i could still hear it click. I sent it to mobiletechvideos and they fixed it really fast and it was a great price.
Here's the link: http://mobiletechvideos.mybigcommerce.com/samsung-captivate-power-button-repair/
B-Naughty said:
Any luck forcing download by puttin the battery in while the usb is hooked up with the vol keys pressed in?
Click to expand...
Click to collapse
goes into boot-loop like if I were holding the volume up/down and the power together. That's what doesn't make sense.
j.curtis.369 said:
I was having the same problem with my power button and eventually the power button stopped working completely even though i could still hear it click. I sent it to mobiletechvideos and they fixed it really fast and it was a great price.
Here's the link: http://mobiletechvideos.mybigcommerce.com/samsung-captivate-power-button-repair/
Click to expand...
Click to collapse
And I could buy another used Captivate for $50. I have an upgrade in less than 3 weeks and this happens
It happened to me once before after flashing a bad kernel. I just did what B-Naughty had suggested. Remove battery -> plug in USB -> hold both volume buttons --> then insert battery. Put me right in download mode and Odin it back with a working power button. Unless it's really a hardware problem, then you're out of luck...
bunnsguy said:
And I could buy another used Captivate for $50. I have an upgrade in less than 3 weeks and this happens
Click to expand...
Click to collapse
Oh in that case imo i would get another used captivate and wait for the sgs 3
Maybe if I went to a store and sucked up to them they'd let me upgrade a month early (especially since I was initially supposed to upgrade in October)
Might be down to getting/making a USB jig if it don't come up... but if you upgrade to gs2, the jig will work for that model as well so won't be wasted...
B-Naughty said:
Might be down to getting/making a USB jig if it don't come up... but if you upgrade to gs2, the jig will work for that model as well so won't be wasted...
Click to expand...
Click to collapse
Maybe a jig would work. But easier, funner solution is adding a line for a Moto Atrix 1 for just a penny plus the $36 fee. Problem solved. Thanks for the help for what could just be a hardware failure. I'll upgrade my other line later when the SGS 3 comes out
Hello,
I've just installed this ROM after wiping Cache/Delvik Cache and system wipe.
Now the phone is stuck on the boot screen and I can not get back into recovery to sort it out.
I held down power & vol+ buttons to get into recovery but nothing happens. The Home & Back buttons flash after 3 seconds then nothing happens.
Any thing else I should do to get into recovery ( TWRP)
My friend whop is a member asked this question on the Developers forum and so far no luck.
we have tried the following:
This is suggested by chogardjr: Plug your phone in to charge. Don't use a USB port for power. After you plug it in try the hard reboot again.
PLEASE HELP
Just for the sake of testing... Have him hold power without holding the volume. It should force reboot, not to the bootloader, so he can get a feel for how the reboot works. It can be finicky during a bootloop cause there are processes trying to run in the background. But it should do it if you hold power long enough.
Edit:
Also find out if the charge light comes on when he plus it in.
Tried and no joy.......
rking786 said:
Hello,
I've just installed this ROM after wiping Cache/Delvik Cache and system wipe.
Now the phone is stuck on the boot screen and I can not get back into recovery to sort it out.
I held down power & vol+ buttons to get into recovery but nothing happens. The Home & Back buttons flash after 3 seconds then nothing happens.
Any thing else I should do to get into recovery ( TWRP)
My friend whop is a member asked this question on the Developers forum and so far no luck.
we have tried the following:
This is suggested by chogardjr: Plug your phone in to charge. Don't use a USB port for power. After you plug it in try the hard reboot again.
PLEASE HELP
Just for the sake of testing... Have him hold power without holding the volume. It should force reboot, not to the bootloader, so he can get a feel for how the reboot works. It can be finicky during a bootloop cause there are processes trying to run in the background. But it should do it if you hold power long enough.
Edit:
Also find out if the charge light comes on when he plus it in.
Tried and no joy.......
Click to expand...
Click to collapse
I had a similar problem with a bad kernel flash and could not get the device to shut all the way off - thats why the keys are blinking. I plugged it in to a charger, left it like that for a few seconds, then unplugged, held it under a bright light and waited. After a few more seconds, it shut all the way down and I was able to boot to recovery in the usual way (power+down). You may have to try combinations or maybe not. But, you won't get to recovery until the phone shuts all the way down. High light under in the 'eyes', plugging and unplugging, and holding the power button for up to 30 seconds are all known ways to do this, but as was said before a bootloop has processes trying to run, so the machine can be 'confused' and have difficulty shutting down. Hope you are successful...
Thanks. I actually got it going with one of the answers posted for me, by powering it off under a bright light.
Sounds daft, but it works.