Recovery Mode with three buttons - Captivate Q&A, Help & Troubleshooting

I have read over and over again that you hold down both volume buttons, and the power button, and it'll boot into recovery - but it's never worked for me. Last night, by accident, I let go of the 'up' volume button, only the 'down' was down along with the power button and low and behold - recovery mode. Is this proper procedure maybe only for certain phones? I was so frustrated, all that would happen with three buttons held down is the AT&T logo screen would flash on and off. I guess I'm just looking for affirmation here.

reinbeau said:
I have read over and over again that you hold down both volume buttons, and the power button, and it'll boot into recovery - but it's never worked for me. Last night, by accident, I let go of the 'up' volume button, only the 'down' was down along with the power button and low and behold - recovery mode. Is this proper procedure maybe only for certain phones? I was so frustrated, all that would happen with three buttons held down is the AT&T logo screen would flash on and off. I guess I'm just looking for affirmation here.
Click to expand...
Click to collapse
It's always been a fickle thing for me. I just use ADB for recovery.
Turn on USB Debugging, open cmd prompt in Windows, navigate to where you have android\tools, then adb reboot recovery
I prefer it because it is reliable. I know I can do hardware keys to recovery but I always seem to require 3 or 4 tries before I can pull it off right.

Thank you - I'm definitely going to have to get more familiar with ADB. I have it set up, but I've never used it. Reliability is what I want, I really don't like the panic attacks in the middle of a ROM install!

Let GO
I think you missed an important step of the process of getting into recovery.
After you see the AT&T screen the 2nd time, LET GO of the power button.
Some phones are quirky about which button to let go of, and according to some posts, european builds do it with just one volume button and the power button. (I think)
Anyway, glad you got there, but be sure to let go of the power button next time.
Out of curiosity, does download mode work?

I can get into download mode with Odin no problem, but not with just the buttons, unless I'm doing that wrong, too.
I did try letting go of the power button, but all that did was boot the phone.
These things are so tricky, and the panic swells when it doesn't work and you're trying to flash a ROM for only the second time in your life!

I know the feeling... when your heart starts racing in your chest..
Been there.

reinbeau said:
I have read over and over again that you hold down both volume buttons, and the power button, and it'll boot into recovery - but it's never worked for me. Last night, by accident, I let go of the 'up' volume button, only the 'down' was down along with the power button and low and behold - recovery mode. Is this proper procedure maybe only for certain phones? I was so frustrated, all that would happen with three buttons held down is the AT&T logo screen would flash on and off. I guess I'm just looking for affirmation here.
Click to expand...
Click to collapse
Affirmative!!!

Hello everyone,
I cant use the 3 button combo at all to get to recovery mode. I've done the "Down Vol., Home, and Power" before and it worked. However, i am not able to get to it after i flashed Bionix-v 1.2, and 1.3. I pretty sure its not because of the ROM, but i just can't figure it out WHAT! I've tried the "Vol. UP, Down, Power" as well, but still not luck. Please help!
Thanks,
Yahase

yahase said:
Hello everyone,
I cant use the 3 button combo at all to get to recovery mode. I've done the "Down Vol., Home, and Power" before and it worked. However, i am not able to get to it after i flashed Bionix-v 1.2, and 1.3. I pretty sure its not because of the ROM, but i just can't figure it out WHAT! I've tried the "Vol. UP, Down, Power" as well, but still not luck. Please help!
Thanks,
Yahase
Click to expand...
Click to collapse
Turn your phone off, and plug in the USB cable. That worked for me.

While your phone is switcher off, press and hold both the Up and Down buttons in the volume. And then plug in the USB.
Sent from my SAMSUNG-SGH-I897 using XDA App

I tried up down vol. With usb still didnt work. Btw im using vibrant.
Sent from my SGH-T959 using Tapatalk

Related

[Q] Problem booting into Recovery

So.... Been playing with this for the last two days trying to root this phone.
I've rooted a few other phones, so I do have experience with the overall process, but I am unable to even boot this phone into Recovery. I have tried booting into recovery by holding down both volume buttons + power and from adb terminal "adb reboot recovery."
Neither method works. The phone will boot (or reboot from adb) and brings up the "at&t World Phone" screen and then nothing else appears. The first time I tried this it actually wouldn't boot up even after pulling the battery and trying to start normally, it still sat at the same screen. I let it sit all day today at the screen until the battery died. I was finally able to get it to boot up earlier.
If anyone can help, that'd be greatly appreciated. Let me know what info I need to add.
I usually just press and hold both volume buttons and power then release just the power button and keeping the volume buttons still pushed on the 2nd time the white at&t screen pops up... Works for me every time.
Sent from my SAMSUNG-SGH-I897 using XDA App
hold volume up+down and power key btw this is wrong section to post supposed to be in general
Oh sorry, didn't realize it was supposed to be posted in general.
I've tried the Volume Up/Down + Power and this does not work, as I stated originally.
I've also tried to do it from the adb shell, which also does not work.
Does anyone have any idea why I can't access recovery?
I"m having a similar issue. Holding volume up+down and power and releasing in any combination just boots the phone up. If I just hold volume up+down and power the phone alternates between the AT&T World Phone screen endless.
Yes u have to let go of the pwr button when the phone screen turns on
Sent from my SAMSUNG-SGH-I897 using XDA App
I've tried just about every combination of the Volume Up/Down + Power and no luck.
I've also tried the following ADB commands, with no luck, it just reboots the phone:
adb reboot recovery
adb reboot-boatloader
When I hold Volume Down + Power I get the a Yellow Triangle with a Android guy with a shove with the text "Downloading... Do not turn off Target!!!"
When I hold Volume Up + Power I get an Android guy with the following text: "POWER RESET or UNKNOWN UPLOAD MODE"
For kicks, I tried to to flash a rooted update.zip via the Volume Down + Power way with the Samsung update software, the same way I have done with the Samsung Moment. Wasn't sure if it'd work, but worth a try.
Any one else have any ideas or suggestions?
Phishie, do you have a final release version? Or anything special about the phone you have?
I just press the two volume buttons first (to make sure theyre pressed before you hit power), then press the power button, as soon as the screen turns on, I let go of everything and it works just fine, no need to have ridiculously complicated instructions.
The trick is to make sure both volume buttons are pressed BEFORE you hit power. Then release. Easy as pie
Also, if you guys are having too much trouble, just download the one click root/unroot. It will run, boot your phone into recovery, then all you have to do is scroll to install packages with volume key and hit power. Done.
Trust me, I am making sure I'm pretty the keys completely. I've literally tried it fifty times by now.
And I've also tried the One Click Root. This does not boot the phone into recovery either. It just sits at the AT&T World Phone screen forever and will actually get stuck here and will not boot up normal even by pulling the battery and powering it back up. It'll just get stuck at the for-mentioned screen. I have to connect it to adb and reboot it there to get it out of the loop it's stuck in.
that doesnt sound good. Maybe you need to try a factory reset? are you running stock rom and everything?
When I first got the phone I did a factory reset.
Yea, it's completely stock to my knowledge. But I have a different ROM than the final release version that everyone else has. This is a pre-production device.
same problem
I try all the combos as well, no luck, would the combos be different for 2e vs 3e recovery?
I try combo, it powers on, the same thing happens, the at-t comes up, goes for a second, then screen brightens, wait a bit and then the home row buttons light up, hangs there... doesnt matter which kernel or which rom I flash, same thing, adb and other stuff wont work as they need usb debugging enabled, which mine isn't.
Is there a way to mod the phone files and flash to enable usb debugging? Anyway to remap the buttons to 2 button vs 3 button?
Everyone post your methods for entering recovery please?

[Q] Any chance of recovery from bricked state?

I was upgrading to Cog 9.1 using 2e recovery and I think my captivate is now bricked. It does not display anything (only black screen). Even after connecting to USB I do not see the battery charging symbol. Is there anyway out of this mode?
I have tried all the different key combos to try to get into download mode. I could always get into download mode earlier using down button + power button combo.
Any pointer will be very helpful.
How did you flash, and when did you realize there was an issue
Captivate
Cog 2.2
I flashed using ROM manager and I realised the issue after the screen remained black for around 30 mins.
sag.misc said:
I was upgrading to Cog 9.1 using 2e recovery and I think my captivate is now bricked. It does not display anything (only black screen). Even after connecting to USB I do not see the battery charging symbol. Is there anyway out of this mode?
I have tried all the different key combos to try to get into download mode. I could always get into download mode earlier using down button + power button combo.
Any pointer will be very helpful.
Click to expand...
Click to collapse
the volume buttons and power combo are used to put it in recovery. Mine got stuck on the at&t logo. I pulled the battery after about 40 minutes, turned it on into recovery, wiped my data, rebooted, then worked flawlessly. My advice -> pull battery, put it back in, hold volume buttons, then connect the usb while continuing to hold up/down volume buttons, this should get you into download mode.
sag.misc said:
I could always get into download mode earlier using down button + power button combo.
Any pointer will be very helpful.
Click to expand...
Click to collapse
This sounds like i9000 rom button combo. Won't work with COG. For recovery hold both volume buttons and hold power button in. When at&t logo shows up, wait about a second and release the power button but continue to hold the vol. buttons. Should get you there.
For download, hold volume buttons down and plug in usb. Should put ya right there.
If you have a cappy that has the no buttons bug, you're pretty much hosed.
Designgears has a thread in the development section about the 3 button issue, with a mod that fixes it. Give it a read.
If you had usb debugging enabled and the computer sees the phone, you should be able to use adb to reboot recovery or download too.

[Q] No really, I bricked it...

OK, I've been reading here for 6 days all manner of Captivate unbricking. Here is my story...
I picked up a Captivate on the Rogers network. I connected it to my email server (Exchange 2010) with no problems, poked around, noticed the lag, noticed the SMS time issue, then promptly rooted, installed clockwork, and then threw cognition 2.2 beta 9.1.3. Quite frankly I was shocked at how much faster it was.
Anyways, after a day of poking around, I could not get my email to my exchange server running (tried the email.pak floating about), so I actually decided I was going to go back to the backup I made of my phone using clockwork before I installed cognition. When I restored my backup, I thought I had bricked my phone.
I let it rest for a day, then came back here, and found one of the 3-4 different variations of the 4 button download mode combo that permitted me to do the 1 click restore. This restored me to the AT&T version of 2.1. It worked, but was less than desirable.
I decided that at that point I really wanted to go back to stock, so I downloaded the stock backup on the Rogers Captivate wiki page, and did the restore using clockwork. The phone has not been the same since.
When i turn it on, I get an at&t splash screen, then in about 20 seconds I get the at&t "jingle", but the splash screen stays on. I can't seem to find any key combination that will permit me to get back into download mode so I can restore using the One Click that worked for me the first time. I have tried:
1. 3 button salute with USB in first, battery out initially.
2. 3 button salute with USB plugged in *as* I was inserting the battery.
3. Power and volume down (both with and without USB, and with battery being plugged in after USB and "during" insertion of battery)
4.Power and volume up with same combo's as #3.
5. Just volume up and volume down with same combo's as #3.
In all cases Odin was running before USB connected, running as administrator. I'm running 64bit windows, but I'm sure I have the correct drivers because I did this the first time with Odin and download mode and I haven't added or changed anything. But just for arguements sake I did uninstall, and then install the drivers again.
Any combination of power and volume buttons just gives me a battery charging logo. Occasionally when holding up until the second black screen I will get a quick indication that the computer might see something, but it dissappears withing a handful of seconds showing it promptly removed.
I'm downloading the Android SDK in the hopes that when I get the normal at&t splash screen after the "jingle" that something might actually be running in the background and maybe I can adb reboot download it but I'm not holding my breath.
Anyone seen this that has managed to get out of it? I'm starting to think the "unbrickable captivate" can be bricked. Assuming it is bricked, short of taking it back, is there anyone on the internet that can jtag these and in some fashion bring back to life?
Cheers,
Tim
This doesn't belong in Development.
MikeyMike01 said:
This doesn't belong in Development.
Click to expand...
Click to collapse
ditto
and download mode is easy.
1. start odin3 and have data cable plugged into the computer
2. insert proper files if needed
3. hold volume up and volume down for 2 sec (no power button needed) then insert usb cable, continue to hold volumes till either the download mode screen pops up or odin3 sees the phone(if you bork the phone bad enough you can corrupt the download mode image, i did it with the not to successfull manhatten project kernel) but despite the screen being black it very well may be in download mode.
4. start flash
5. if it doesn't work send it to me ill find a use for it
alternatively if the phone can go passed the splash screens and boots fully you can adb reboot download. just get the development kit and drivers on your pc.
Dani897 said:
ditto
and download mode is easy.
1. start odin3 and have data cable plugged into the computer
2. insert proper files if needed
3. hold volume up and volume down for 2 sec (no power button needed) then insert usb cable, continue to hold volumes till either the download mode screen pops up or odin3 sees the phone(if you bork the phone bad enough you can corrupt the download mode image, i did it with the not to successfull manhatten project kernel) but despite the screen being black it very well may be in download mode.
4. start flash
5. if it doesn't work send it to me ill find a use for it
alternatively if the phone can go passed the splash screens and boots fully you can adb reboot download. just get the development kit and drivers on your pc.
Click to expand...
Click to collapse
Thanks, but that doesn't work. All I get is the battery charging screen. Using the process it does not go into download mode.
MikeyMike01 said:
This doesn't belong in Development.
Click to expand...
Click to collapse
Could a moderator move this to Captivate General then? Sorry about that...
timmy22 said:
Thanks, but that doesn't work. All I get is the battery charging screen. Using the process it does not go into download mode.
Click to expand...
Click to collapse
just to be clear, you are holding volume up as well as volume down starting with the phone being powered down and continue to hold them after you plug in usb untill something shows on the screen?
if your phone is not seeing the volumes buttons you are one of the very unlucky few that had a problem at the most inopportune moment.
there is also a way where you hold all three buttons till the phone reboots twice, or something. let me try it and ill give more specifics.
timmy22 said:
Thanks, but that doesn't work. All I get is the battery charging screen. Using the process it does not go into download mode.
Click to expand...
Click to collapse
Pull the battery, open odin, plug usb into computer, hold vol up and down, plug usb into phone still holding vol buttons, drop in battery still holding vol buttons, when dl screen pops up and yellow com port lights up in odin release volume buttons. Do not touch power button at any time
Swyped...and sorry I don't proofread
Have you tried rebooting into recovery mode instead of download mode? Stock recovery is adb-ready and you should be able to adb reboot download. Its a long shot if you're having problems using button combo to get to d/l mode, but it's probably still worth a shot at this point.
If you were able to use 3 button combos before all this happened, and did NOT have to install the 3 button combo fix, its strange you don't have access to it now... Could restoring a Rogers Cappy to AT&T stock be the problem?
Dani897 said:
just to be clear, you are holding volume up as well as volume down starting with the phone being powered down and continue to hold them untill something shows on the screen?
if your phone is not seeing the volumes buttons you are one of the very unlucky few that had a problem at the most inopportune moment.
there is also a way where you hold all three buttons till the phone reboots twice, or something. let me try it and ill give more specifics.
Click to expand...
Click to collapse
Yes, that's exactly correct. I do this:
1. everything pulled (battery, USB, sim, sd)
2. Open Oden (1 click)
3. Install battery
4. hold down (and keep holding) volume up and volume down
5. insert USB cable
6. depress (i.e. don't hold) power button
Goes straight to battery charging indicator.
If I swap #6 with holding the power button down, it continually reboots while just barely showing the battery charging indicator. I've tried letting go between black screens on the 1st, 2nd, 3rd, 4th, and 5th black screen. Still no android dude with the shovel.
Try all the steps you stated but not the last one where you press the power button. Don't press the power button.
newter55 said:
Pull the battery, open odin, plug usb into computer, hold vol up and down, plug usb into phone still holding vol buttons, drop in battery still holding vol buttons, when dl screen pops up and yellow com port lights up in odin release volume buttons. Do not touch power button at any time
Swyped...and sorry I don't proofread
Click to expand...
Click to collapse
Goes straight to battery charging.
johnny13oi said:
Try all the steps you stated but not the last one where you press the power button. Don't press the power button.
Click to expand...
Click to collapse
Goes straight to battery charging.
Pull out battery for 10 seconds, hold volume up + down, connect usb into other usb port.
Sent from my GT-I9000 using XDA App
Seriously, try adb. It works wonders.
Sent from my SAMSUNG-SGH-I897 using XDA App
10tonhammr said:
Have you tried rebooting into recovery mode instead of download mode? Stock recovery is adb-ready and you should be able to adb reboot download. Its a long shot if you're having problems using button combo to get to d/l mode, but it's probably still worth a shot at this point.
If you were able to use 3 button combos before all this happened, and did NOT have to install the 3 button combo fix, its strange you don't have access to it now... Could restoring a Rogers Cappy to AT&T stock be the problem?
Click to expand...
Click to collapse
Trying to get into recovery mode gets me the at&t logo and the "jingle", but no recovery mode menu to reboot, etc.
This is what I'm worried about, restoring the Rogers stock over top of the Odin 1 click restore (which is an AT&T image) has bricked it and prevents download mode from invoking.
fatttire said:
Seriously, try adb. It works wonders.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
I know, I played with adb before I bricked it. ADB needs to "see" the phone, it no longer sees it (I have three computers, all three can't see it, but they can see my friends cappy with no problems first time, every time). Same process for his phone works every time to get into download mode, but not on mine.
And yes, have tried other USB ports on the same computer, both on the mainboard, and on the front ports.
Keep the ideas coming though please, I will try every one.
timmy22 said:
I know, I played with adb before I bricked it. ADB needs to "see" the phone, it no longer sees it (I have three computers, all three can't see it, but they can see my friends cappy with no problems first time, every time). Same process for his phone works every time to get into download mode, but not on mine.
And yes, have tried other USB ports on the same computer, both on the mainboard, and on the front ports.
Keep the ideas coming though please, I will try every one.
Click to expand...
Click to collapse
There's a trick to prompt download mode through a "jig" which you can hack together for about $2 in parts and a sacrificial microUSB cable...it works on the other SGSes, but I think it should work on the Captivate as well. Never tried it personally...
Merlin_reloaded said:
There's a trick to prompt download mode through a "jig" which you can hack together for about $2 in parts and a sacrificial microUSB cable...it works on the other SGSes, but I think it should work on the Captivate as well. Never tried it personally...
Click to expand...
Click to collapse
I work in a tech shop so have access to electronics, sacrificial cables, soldering irons, resistors, caps, etc.... could you point me in the right direction?
Oh, nevermind, found it in the i9000 forum. Will test first thing in the morning!
Cheers,
I bricked one today as well. Exactly what you are talking about here. The only thing is that i was still under the 30days so i swapped it out for a new one. As of right now ive been debating whether i want to do the voodoo fix (which i think is what bricked it to begin with)

[Q] Help me turn my Captivate off!

So here is the situation:
My power button is non-functional. This happened before, and I was able to press very firmly on the power button to access a shut down menu and turn off the phone. From this, I was able to enter download mode (pressing volume button while inserting USB) and go back to stock, which surprisingly, fixed my power button. I thought this nightmare was over.
Now, my power button has stopped working again (ICS hacksung 5.0). No matter how much pressing, prodding, whatever, I cannot get the power button to turn off the phone.
I cannot find any adb commands to turn off phone.
"adb reboot download" simply restarts the phone, no download mode. (adb does recognize the device)
If I take out the battery, as soon as I put it in the phone boots up.
If I am pressing any of the volume buttons when I put the battery in, I can access recovery mode (But cannot select anything because power button is still broken)
Any ideas? I doubt my phone is still under warranty (1.4 years old) and I do not have mobile insurance.
Thanks for any help in advance
Depending on what recovery u have (cwm or ?), U can use the capacitive buttons, while in that revovery, to navigate and select the power off option.
Sent by XDA Premium App
Thats a neat tip that I didn't know about, but I can't find any option to power off? Sorry for being retarded but I have given this time I promise
cwm recovery is what I have installed atm
Reboot to CWM and Power off option may be at the bottom of the 1st screen that u come to. That is dependent on what version of cwm u have though.
Quick boot from the market, you can place a poweroff button directly on the home screen
Sent from my SAMSUNG-SGH-I897 using xda premium
The ICS ROMS CWM recovery doesn't have power off choice, so he can't do that.
Sent from my SGH-I897 using xda premium
Unfortunately the quick boot "power off" option simply froze my phone, or restarted it.
I let my battery drain so that I could get a dead phone (that part worked), but when I hold my volume buttons and plug in the USB for download mode it goes to the "battery" screen or (if both are held down) recovery. No download mode.
In recovery "key test" the power button fails to register any key press, but it is not spamming either. This seems like a hardware problem, but I am not sure how it was fixed when I flashed back to stock before if that is the case
I will next try making a download mode jig, I'll let you guys know how it goes...
My cousin had the exact same problem less than a month ago.
I see you tried reboot download through adb, have you tried it using the same command, but using android emulator from market? That worked for her phone so worth a shot.
its a far shot but odin is now available for use on the phone itself and works on our phones. maybe you can find a kernel thats had the buttons reconfigured. i know darky has one somewhere.
StaticMatt said:
My cousin had the exact same problem less than a month ago.
I see you tried reboot download through adb, have you tried it using the same command, but using android emulator from market? That worked for her phone so worth a shot.
Click to expand...
Click to collapse
Thanks for this idea, when I use
#su
#reboot download
the phone simply reboots. Same thing happens in "Quick Boot" 's "Bootloader" reboot option. This phone just seems broke as hell.
Firstly, this power button problem is a lot more common than you would think. It is most often a hardware failure - I mean the button mechanism (springs etc. just dies). Google it to see how common.
Your post suggests a clue: If just putting the battery in reboots the phone, then the power button may be stuck in the "in" position.....so it is always getting "pushed". Then anything you do would mean ht epower button is already being pressed. If this is the case, you will never get a software solution ???
Also, I absolutely do not mean to be nasty. But if you search both Q&A and General sections there are previous threads with this button problem. Many other solutions have been posted and it will be difficult to list them together.
Finally, you can actually replace - yes, replace - the button yourself. Google/you tube has it.
http://www.globaldirectparts.com/Samsung-Captivate-i897-Replacement-Repair-Parts-s/6412.htm
http://forum.xda-developers.com/showthread.php?t=1206459
Hope this helps !

Power button is broken? How to reboot to download?

Power everything was working this morning
Noticed that my power button wasn't working...the screen stayed on. Pulled battery, put it back in and the phone booted without pressing power.
Was like "wtf?"
When it booted, I couldn't turn off the screen.
So I just left the battery out and took it home.
Put a new rom on phone, thought "This will fix it."
Wrong.
Had to flash using Rom Manager because in recovery the power button doesn't respond.
When it began to boot "AT&T Screen" wouldn't disappear and show me some Doc's v4.
I can manipulate it to boot into recovery but the power button doesn't work still.
I can NOT get it to go into recovery.
Can someone helps me?
bunnsguy said:
Power everything was working this morning
Noticed that my power button wasn't working...the screen stayed on. Pulled battery, put it back in and the phone booted without pressing power.
Was like "wtf?"
When it booted, I couldn't turn off the screen.
So I just left the battery out and took it home.
Put a new rom on phone, thought "This will fix it."
Wrong.
Had to flash using Rom Manager because in recovery the power button doesn't respond.
When it began to boot "AT&T Screen" wouldn't disappear and show me some Doc's v4.
I can manipulate it to boot into recovery but the power button doesn't work still.
I can NOT get it to go into recovery.
Can someone helps me?
Click to expand...
Click to collapse
have ODIN open, and battery removed from phone... hook up usb, hold both vol keys, while inserting battery... you should get download mode fine even with a busted power button... what you do next is up to u....
Once more, I can NOT get it to boot into recovery in that fashion.
I cannot place batter in the phone without it attempting to boot
(doesn't not get past the AT&T boot screen)
I cannot plug it up, hold volume buttons and then put in battery because it will just charge. If I unplug the phone, the phone still thinks it's charging actually.
My question really is Can I 'fix' the power button, or can I reboot it into download mode through command propt? I've never used ADB to access my phone, so that'll be new.
bunnsguy said:
Once more, I can NOT get it to boot into recovery in that fashion.
I cannot place batter in the phone without it attempting to boot
(doesn't not get past the AT&T boot screen)
I cannot plug it up, hold volume buttons and then put in battery because it will just charge. If I unplug the phone, the phone still thinks it's charging actually.
My question really is Can I 'fix' the power button, or can I reboot it into download mode through command propt? I've never used ADB to access my phone, so that'll be new.
Click to expand...
Click to collapse
Dude... recovery is useless right now, you have a busted power button... and because of 'said busted power button', none of what you're trying to do is going to work... like youve said...
You are down to trying to force download mode with USB cord, holding the vol keys, and inserting the battery... ADB cannot run commands to a phone stuck at the boot screen... Thread title says, how to reboot to download, and with the button like it is, all you can do is what i've posted...
As to fixing the power button, i don't see why that's not possible... do u feel it press at all?
B-Naughty said:
As to fixing the power button, i don't see why that's not possible... do u feel it press at all?
Click to expand...
Click to collapse
Yeah, it 'presses' and 'clicks'. I mean it worked most of the day, it got low on power and it just quit working.
Any luck forcing download by puttin the battery in while the usb is hooked up with the vol keys pressed in?
I was having the same problem with my power button and eventually the power button stopped working completely even though i could still hear it click. I sent it to mobiletechvideos and they fixed it really fast and it was a great price.
Here's the link: http://mobiletechvideos.mybigcommerce.com/samsung-captivate-power-button-repair/
B-Naughty said:
Any luck forcing download by puttin the battery in while the usb is hooked up with the vol keys pressed in?
Click to expand...
Click to collapse
goes into boot-loop like if I were holding the volume up/down and the power together. That's what doesn't make sense.
j.curtis.369 said:
I was having the same problem with my power button and eventually the power button stopped working completely even though i could still hear it click. I sent it to mobiletechvideos and they fixed it really fast and it was a great price.
Here's the link: http://mobiletechvideos.mybigcommerce.com/samsung-captivate-power-button-repair/
Click to expand...
Click to collapse
And I could buy another used Captivate for $50. I have an upgrade in less than 3 weeks and this happens
It happened to me once before after flashing a bad kernel. I just did what B-Naughty had suggested. Remove battery -> plug in USB -> hold both volume buttons --> then insert battery. Put me right in download mode and Odin it back with a working power button. Unless it's really a hardware problem, then you're out of luck...
bunnsguy said:
And I could buy another used Captivate for $50. I have an upgrade in less than 3 weeks and this happens
Click to expand...
Click to collapse
Oh in that case imo i would get another used captivate and wait for the sgs 3
Maybe if I went to a store and sucked up to them they'd let me upgrade a month early (especially since I was initially supposed to upgrade in October)
Might be down to getting/making a USB jig if it don't come up... but if you upgrade to gs2, the jig will work for that model as well so won't be wasted...
B-Naughty said:
Might be down to getting/making a USB jig if it don't come up... but if you upgrade to gs2, the jig will work for that model as well so won't be wasted...
Click to expand...
Click to collapse
Maybe a jig would work. But easier, funner solution is adding a line for a Moto Atrix 1 for just a penny plus the $36 fee. Problem solved. Thanks for the help for what could just be a hardware failure. I'll upgrade my other line later when the SGS 3 comes out

Categories

Resources