[Q] Force Stop msg, Trying to Flash - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi, n00b poster here...
Got a "force stop" as soon as the phone boots up. Tried the software reset, didnt work, so now trying to do the flash in download mode. Got all the files (.pit and the .tar file) got OdinV3 and the drivers are installed to detect the phone.
However, when I click the start button OdinV3 causes a fatal error and crashes. I have tried this on multiple computers and it does the same thing. HELP PLEASE!
EDIT: I am using the i9000DTJF3 file found on these forums as its the original OPTUS firmware.

You can give Heimdall (my flashing tool) a try if you want. I suspended the public alpha for the moment because it bricked a phone however if nothing else is working you might as well give it a shot.
Send me a PM if you would like the download link.
Before you do that however, have you tried removing the battery for a couple of minutes then retrying? I'm not actually sure how that makes any sense but quite a few people have reported it as helping.

ok, so downloaded the DTJG4 firmware from samsung firmwares and it now gets to this;
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
Should this take a long time? I figured it wasnt working once it sat there for ages...

c0ris said:
ok, so downloaded the DTJG4 firmware from samsung firmwares and it now gets to this;
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
Should this take a long time? I figured it wasnt working once it sat there for ages...
Click to expand...
Click to collapse
Nope, that should be pretty much instantaneous.

Are you sure you're in download mode and not recovery mode?

nsgtr34 said:
Are you sure you're in download mode and not recovery mode?
Click to expand...
Click to collapse
I can't remember, will Odin even detect a phone in recovery mode?

all fixed, tried another firmware off another site and it worked ok...back to normal thank f**k

Related

[Q] Odin3 stopped while installing JH3... Help?

Hey guys,
While on my way to the super root patch ( forum.xda-developers.com/showthread.php?t=751934&highlight=stock ), I first am trying to install JH3. I got Odin3 v1.00, put the .tar in the PDA box, and clicked start. Here's the log:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
<ID:0/004> cache.rfs
<ID:0/004> dbdata.rfs
<ID:0/004> factoryfs.rfs
<ID:0/004> Removed!!
It hasn't changed in about 10 minutes. Any thoughts?
Thanks!
Pull the battery, get back into download mode with the key combo and start again. Odin is finicky and sometimes takes more than one try.
Sent from my SAMSUNG-SGH-I897 using XDA App
thecoolestcow said:
Hey guys,
While on my way to the super root patch ( forum.xda-developers.com/showthread.php?t=751934&highlight=stock ), I first am trying to install JH3. I got Odin3 v1.00, put the .tar in the PDA box, and clicked start. Here's the log:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
<ID:0/004> cache.rfs
<ID:0/004> dbdata.rfs
<ID:0/004> factoryfs.rfs
<ID:0/004> Removed!!
It hasn't changed in about 10 minutes. Any thoughts?
Thanks!
Click to expand...
Click to collapse
Well the log says "removed" so somehow your USB connection got interrupted... which means your phone is going to be in Phone/Computer screen hell.
Close Odin, unplug your phone, pull out your battery/sim/sdcard.
Open Odin, put in your battery, attach USB, and hold both volume buttons without applying power to get back into download mode to try again
If that doesn't work:
Unplug the phone from everything, hold both buttons and power... keep holding power till the screen turns off, continue holding power- the screen will turn off a second time, at that point release power and continue holding the volume buttons and you *should* get the download screen
Thanks for the quick replies! Unfortunately, Odin doesn't seem to see that it's connected. I don't see anything in the ID:COM boxes. I changed USB ports, nothing. Should I uninstall and reinstall the drivers?
thecoolestcow said:
Thanks for the quick replies! Unfortunately, Odin doesn't seem to see that it's connected. I don't see anything in the ID:COM boxes. I changed USB ports, nothing. Should I uninstall and reinstall the drivers?
Click to expand...
Click to collapse
Odin won't see it unless the phone is powered up in download mode, if you've gotten it to download mode and Odin still can't see it then yeah... your drivers might be fubar
Odin tends to work best for me if I get everything set up in Odin just short of pressing the start button before connecting the phone to the computer and putting it in download mode. Maybe it's superstition, but it seems to help me avoid some of those timeout issues.
Sent from my SAMSUNG-SGH-I897 using XDA App
I'm curious..what happens when you remove and replace battery, hold power up and hit power...wall o text?
Got it! Everything installed, super root added. Thanks for all your help!
Ok I apologize if this isnt where this belongs, but i have yet to find an answer i understand. Is odin a program that i can download to a desk top computer and run? I keep seeing open odin and do this , open odin and plug in phone. its always sounds like an easy step, but for someone who doesnt know how to even get odin, it has prevented me from doing alot of things with my phone. I see "needs odin' an i move on to the next thread I know its a firmware to help flash roms, but that is about it please educate a supernoob lol
I understand what you mean, I just got my captivate yesterday and spent a six+ hours figuring that stuff out. I think I might try to write up the steps I went throigh to help other Android noobs like me. I'm coming from an iphone so this is all new for me. The good news: I figured it all out finally and so can you. I now have JH3 installed, and the super root mod, overclocked and evertything. My quadrant score went from stock of around 900 something to 2160 after all the tweaks I applied. I cant wait to see how it performs with 2.2!
Ok, so basically heres what i figured out; to use Odin, you'll need a firmware image, and Odin will be included. I recommend upgrading to JH3 and installing SuperRoot. It makes everything pretty painless. SuperRoot installs lagfix, root, and much much more all at once.
Search for the SuperRoot thread (IIRC). In there is a link to instructions on how to restore your phone to stock. Look for the thread on JH3 and get that image. Post 6 in that thread has instructions, and the restore to stock thread has more of an explanation. Then, you can do whatever else you need. HTH.
Ill get on my pc in a minute a put the links in here.
Sent from my SAMSUNG-SGH-I897 using XDA App
Ok, I was wrong about the title: it's SuperRooterExtreme. I apologize for not being able to post links for you.
Code:
forum.xda-developers.com/showthread.php?t=751934
Follow the instructions on the next two links to flash to JH3. The fist link is for JH2, but the directions still work. Just download the JH3 firmware.
Code:
forum.xda-developers.com/showthread.php?t=751518
Code:
forum.xda-developers.com/showthread.php?t=731989
This page has all the files you need:
Code:
samsung-firmwares.com/i897.htm
You need the firmware file, the PIT file, and Odin. The links for all of that is on the above page. The PIT file and Odin are under the section called "Flash Tools."
Once you've restored, you can follow the instructions for the first link I gave (SuperRooterExtreme). Or, you can do whatever else you want. This is just what I figured out yesterday.
I know what it's like to not know what Odin is! Took me forever to figure it out, I downloaded all kinds of stupid crap before I got it right.
The odin I downloaded from the samsung firmware website is only 167kb and an unknown file that won't open what's that about
Sent from my SAMSUNG-SGH-I897 using XDA App

[Q] Stuck at "Get PIT for Mapping" everytime

hello all! so i hope that wans't posted before,
Here is the thing , earlier today i tried to flash to JM7 but odin got stuck for 2 hours so i unplugged the usb. Since then i have been trying to flash jm,1 jm5, or jm6 but i can't get past the "get PIT for Mapping".,
Since earlier i also can't make the phone to boot, black screen all the way , the only thing i can do is get in download mode, i can't even access recovery mode.
did it ever happen to anyone?
Yeh happened a few times. Are you using the right pit file? Also set odin to win xp compatibility mode with admin access. Unplug all usb except mouse and kb and try again
Worst case find yaself a xp box and do it there.
Sent from my GT-I9000 using Tapatalk
d.fx said:
hello all! so i hope that wans't posted before,
Here is the thing , earlier today i tried to flash to JM7 but odin got stuck for 2 hours so i unplugged the usb. Since then i have been trying to flash jm,1 jm5, or jm6 but i can't get past the "get PIT for Mapping".,
Since earlier i also can't make the phone to boot, black screen all the way , the only thing i can do is get in download mode, i can't even access recovery mode.
did it ever happen to anyone?
Click to expand...
Click to collapse
Did you follow exactly the instruction given? You may read the link below
http://forum.xda-developers.com/showpost.php?p=7940762&postcount=1
It did happen to me once , i was on windows 7 , i installed xp on my macbook and since then all my flash went great.
Sent from my GT-I9000 using XDA App
d.fx said:
hello all! so i hope that wans't posted before,
Here is the thing , earlier today i tried to flash to JM7 but odin got stuck for 2 hours so i unplugged the usb. Since then i have been trying to flash jm,1 jm5, or jm6 but i can't get past the "get PIT for Mapping".,
Since earlier i also can't make the phone to boot, black screen all the way , the only thing i can do is get in download mode, i can't even access recovery mode.
did it ever happen to anyone?
Click to expand...
Click to collapse
Yeah I know..I'm bringing a thread back from the dead. But I'm desperate right now.
I'm having the same issue. So I rooted my phone awhile ago and was using the Paragon RC4 ROM, I upgraded it to RC6 and everything worked fine, but I decided to start from a clean slate and use ODIN3 to go back to stock and start from scratch (with a full battery cause when I first flashed I was apparently only at 98% battery). So I started ODIN3 and put the phone into download mode. ODIN picked the phone up right away and I hit Start. ODIN's status says:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
And it sits at 'Get PIT for mapping..'.
There's a small blue status bar on the phone and it just sits at about 1/4".
I did a bad thing and yanked the battery and now the phone will only go into Download mode and ODIN still just sits at 'Get PIT for mapping..'. I can't get into recovery mode, can't even get a splash screen. I can't post in the [STOCK ROM\ Odin3 thread cause I'm a new member. So I'm stuck...anyone know what I can do to fix this?
Where is the pit file you are using .
jje
I have the same problem. Phone get's stuck at that point. I don't know what to do. I am using win 7 64 bit. Does anyone have an idea.
razyell said:
I have the same problem. Phone get's stuck at that point. I don't know what to do. I am using win 7 64 bit. Does anyone have an idea.
Click to expand...
Click to collapse
Put pit file on the desktop in a folder with the zipped files makes location easy .
Are you using the correct pit file are you loading it in PIT
jje
done.
JJEgan said:
Put pit file on the desktop in a folder with the zipped files makes location easy .
Are you using the correct pit file are you loading it in PIT
jje
Click to expand...
Click to collapse
I've managed to solve it. It wasn't the pit file, it was my 64 bit Windows. After I emulated a virtual machine and installed windows xp 32 bit, it worked like a charm.
razyell said:
I've managed to solve it. It wasn't the pit file, it was my 64 bit Windows. After I emulated a virtual machine and installed windows xp 32 bit, it worked like a charm.
Click to expand...
Click to collapse
My i9003 gets stuck there. i tried to emulate but i get an error regarding the PDA. can u please let us know how u did it???
razyell said:
I've managed to solve it. It wasn't the pit file, it was my 64 bit Windows. After I emulated a virtual machine and installed windows xp 32 bit, it worked like a charm.
Click to expand...
Click to collapse
this is the error i get in the virtual pc in xp mode
i solved it by plugging the cord into another port and letting windows rediscover the phone
screwyluie said:
i solved it by plugging the cord into another port and letting windows rediscover the phone
Click to expand...
Click to collapse
Plus One to this solution. Thought I killed my phone.
screwyluie said:
i solved it by plugging the cord into another port and letting windows rediscover the phone
Click to expand...
Click to collapse
+1
soft brick
i got the same problem.
cant get it right. im on winxp 32 got the pit file from this thread and stock rom MDC from Sammobile site.
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Removed!!
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Added!!
I don't know what happened, I switched from pc to laptop and tried the same thing with pit file, same error, but my phone is working now. No changes in the phone it's still in MDL and I have superuser app but it says binary not found. Can't install binary also...
Sent from my SPH-L710 using Tapatalk 2
SOLVED
http://forum.xda-developers.com/showthread.php?t=2298876
[solved] pit file not found error
Sent from my SPH-L710 using Tapatalk 2
same problem :/
n30nix said:
Yeah I know..I'm bringing a thread back from the dead. But I'm desperate right now.
I'm having the same issue. So I rooted my phone awhile ago and was using the Paragon RC4 ROM, I upgraded it to RC6 and everything worked fine, but I decided to start from a clean slate and use ODIN3 to go back to stock and start from scratch (with a full battery cause when I first flashed I was apparently only at 98% battery). So I started ODIN3 and put the phone into download mode. ODIN picked the phone up right away and I hit Start. ODIN's status says:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
And it sits at 'Get PIT for mapping..'.
There's a small blue status bar on the phone and it just sits at about 1/4".
I did a bad thing and yanked the battery and now the phone will only go into Download mode and ODIN still just sits at 'Get PIT for mapping..'. I can't get into recovery mode, can't even get a splash screen. I can't post in the [STOCK ROM\ Odin3 thread cause I'm a new member. So I'm stuck...anyone know what I can do to fix this?
Click to expand...
Click to collapse
same problem dud , i didnt find any solution so far ! :/
moody-mj said:
same problem dud , i didnt find any solution so far ! :/
Click to expand...
Click to collapse
Do you have a custom recovery or not?
Sent from my SPH-L720 using Tapatalk 4 Beta
thx for your fast replay...
pvinodnayak said:
Do you have a custom recovery or not?
Sent from my SPH-L720 using Tapatalk 4 Beta
Click to expand...
Click to collapse
first of all thanks for your fast reply
i've downloaded this firmware ( \N7100XXDLJ2 OXA FACTORY )
and tried it , didnt work
i work at samsung company in lebanon , and i have all the offical firmwares
i tried them , it wont work
in odin 3.04 it wont work , it quickly fails with out even starts ( re-partition operation failed )
and in odin 3.07 ( get pit for mapping ) and stucks on ( set partition )
i tried allot of different PIT files , and unticking ( re-partition ) nothing happend , and it only goes to download mode , or when i turned it on , it stucks on ( samsung galaxy note II ) plz help me

Getting a symbol of a phone and PC with a caution sign inbetween when I boot my phone

What does that mean? I'm getting it after I put my phone into download mode and tried to put my phone back to stock with Odin. Odin hung up on me and I had to disconnect.
What do I do?
I could be wrong but I believe that's a brick..? I've never bricked but that would be my guess
Sent from my SAMSUNG-SGH-I897 using XDA App
Oh, jesus, don't tell me that.
Whew, ****, got it back into DL mode using this: http://forum.xda-developers.com/showthread.php?t=775911
I had this same issue, now I can't seem to get my phone to power up at all. any suggestions?
Post above yours
it is getting to the same point about 1/8 of an inch of a blue bar and it stops same problem I have been having
What build is your phone, located under battery, mine is 1008
1009, reconnected/ restarted odin and its on
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
been there for 5 minutes or so
Hookiloo said:
1009, reconnected/ restarted odin and its on
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
been there for 5 minutes or so
Click to expand...
Click to collapse
Not good. There is than one odin.sounds like you are going to have to use a different method. There is an odin that people with 1010 build have to use. Let me see if I can find the thread
try this
M y phone need this done 3 or 4 times before it finninshe odin some times.
http://forum.xda-developers.com/showthread.php?t=775911
odin is wonky especially if you have the stock rom jf6 on there. it is always best to have odin prepared with the pit and .tar files first and to use the usb cable + 2 buttons to get download mode, i remember way back when my phone was stock and i tried to flash stock it wasn't working. i flashed a beta rom jh2 ( the only altenative at the time) and it worked. never had another issue flashing and i have been through many froyo versions and ports from other galaxy s phones and used all the 2.1 roms. odin jf6 just didn't like to flash over jf6 but it usually eventually works.

Can't flash with Odin - Please help!

I have been trying to flash my Samsung Galaxy S i9000 for a week now with no success.
First off, it has a lot of problems connecting when I am in download mode. It has no problem at all when the phone is fully booted up, but Odin has a really hard time seeing it while the phone is in download mode. I have to restart the phone several times into download mode and pull the cable, etc until I can finally get Odin to see it.
Once I get Odin to finally see the phone in download mode I loaded the PIT and the PDA files from the tutorial for DarkyROM_10.2_Resurrection.
But when I hit start is just stops here:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
And will not go any further.
I originally rooted with one click, but I am afraid I might have messed that up. After I did the one click I was messing around with the phone and formatted the internal memory from the download screen. I even went back into one click to try to unroot, but it gives me an error message.
Did I mess up my phone? Is there any way to fix this?
have you ever succeeded in flashing with odin or first time?
have you closed all kies programs from task manager? (do you even have it installed?)
if you have win7, have you opened odin with right click menu->as administrator?
what ver. of odin do you use?
maybe the cable is faulty?
did you connect it directly to the comp or by some hub? (better connect directly)
guy7685,
No, I have never flashed before. This is the first time.
I tried running Odin as system admin, made no difference.
I do not have Kies installed.
I'm pretty sure the cable is good, it works fine for everything else including data transfer on my other phone, just not in download mode for this phone.
I've tried a few different versions. v1.30, v1.83, v1.85
When I tried in in v1.83 & v1.85 I get a fail, then this message:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Any thoughts?
If you have another computer you can try it on, do that otherwise I think you need to install the drivers again. You can search for them or you can install them via kies. Once you have kies installed go to tools and install drivers.
Remember that before you open Odin you go through task manager to close all kies processes.
Good luck
Sent from my GT-I9000 using XDA
Got it to work
I was finally able to get it to work. I think I was using the wrong recovery screen or at least what I thought was a recovery screen because I finally got the guy in the construction picture and it flashed no problem with Odin.
After Odin Succes
Everything is ok and all thred completed (succesd 1 / failed 0)
After this, my galaxy tries to reboot but it only shows the flashing battery and will not reboot itself.
Help!
jimnycricket65 said:
Everything is ok and all thred completed (succesd 1 / failed 0)
After this, my galaxy tries to reboot but it only shows the flashing battery and will not reboot itself.
Help!
Click to expand...
Click to collapse
i have similar problem. Please have you gotten solution to this problem? Your help is appreciated. Thanks.
are you instaled drivers completly???
alireza17mah said:
are you instaled drivers completly???
Click to expand...
Click to collapse
Right Click -> Run As Administrator it should resolve the issue
If its showing the battery only then its probably the wrong flash file.
Sent from my GT-I9000 using xda app-developers app

[Q] Flashing CWM 5.5.0.4 in ODIN

I tried to flash ClockworkMod 5.5.0.4 via Odin3 on this Galaxy Tab 8.9 (GT-P7310) and it doesn't really do *anything* after I hit start and it does a couple status messages.
Code:
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> recovery.img.md5
It's sat here for 20 minutes "flashing" and hasn't really progressed.
It does the same thing with the stock recovery img, and if I long-press the power, I get a device--/!\--computer screen talking about an error while flashing, and that I'm a moron, and I need to fix it in download mode.
Am I doing something wrong? Did I look at it funny? Should I smash it with a hammer?
Help please.
Hm, unb0rked.
I sideloaded ROM Manager (since the wifi on this pile drops every 15-30 seconds), installed the 10.1's recovery (despite knowing it would work), then took the thing home and hooked it up to my desktop and ODIN worked fine.
I think it just hated the laptop I was trying to work from.
Kalico said:
Hm, unb0rked.
I sideloaded ROM Manager (since the wifi on this pile drops every 15-30 seconds), installed the 10.1's recovery (despite knowing it would work), then took the thing home and hooked it up to my desktop and ODIN worked fine.
I think it just hated the laptop I was trying to work from.
Click to expand...
Click to collapse
Glad you sorted it out. Although, that sounded like a driver or connection problem. Make sure you've the latest drivers.
nirogu325 said:
Glad you sorted it out. Although, that sounded like a driver or connection problem. Make sure you've the latest drivers.
Click to expand...
Click to collapse
Yeah, they were, though something may have happened when installing Kies.
I grabbed your toolkit when I did it on my own computer, and the separate driver file is more gooder, thanks.

Categories

Resources