Related
I read something in one of the other threads about the 3 button issue that the phone needs to be switched off before you can get it into recovery mode. I queried what this person meant by "phone switched off"... if he meant the device itself (which makes no sence) or if he meant that the phone needed to be in "airplane mode" with NO signal to get into recovery. I have not gotten a reply yet but here is why I ask this...
I have been to many bell stores who are out of stock on the actual devices themselves but have the instore display models and EVERY one of the display models I tried went into recovery mode EVERY TIME with the 3 buttons. Now obviously these phones dont have any signal to them and ALL of them went into recovery mode with no problems.
Hmmmm... Does ANYONE have any feedback to provide here?
Seems I may have misread the other thread as now I see that they were talking about download mode and not recovery but I am still wondering about this being a possibility as to how we can get into 3 button recovery. Samsung Mobile Canada on facebook says that they are working on a software update to fix this issue so I wonder if this could be the cause of this issue?
Still curious... Any ideas?
PLEASE HELP: Calling all experts!!!
After installing the: [STOCK ROM] Odin3 One-Click Downloader and Drivers CAPTIVATE ONLY
My Galaxy S 19000 is stuck on the at&t boot screen.. the at&t logo just keeps flashing...
I cannot get into download mode...
PC is not recognising phone via Kies, odin or anything else...
Something tells me I have made a huge mistake somewhere along the line.. any fix???
Thank you
If no recovery/download mode working...
Only UART/JTAG, check on progress on this.
Thank you for your help...
Quite expensive options aren't these, GOOD THING I HAVE INSURANCE!!!
There must be a software way around this thou...
HELP!!!!
If your phone can't get into download mode due to it being disabled it looks like your pretty much screwed. You could phone samsung and see if they'd fix it.
Sent from my GT-I9000 using XDA App
If you can get to the AT&T logo part, I'm assuming you should still be able to get to download mode. Did your phone have dl mode before?
Thread moved to Q&A section
Yes my phone could get into dl mode b4 but now it doesn't work any more, phone just keeps on showing at&t logo and rebooting.
When I put the USB lead in the phone does not switch on at all..
thanks 2 all for assistance in this horrible mess negligence has left me in.
the USA models goes into download mode by using the volume up + volume down + power
see if that works
Thanks for your reply...
no joy... any other viable button combinations I could try? I've already tried many to no avail...
I'm no expert on the matter but don't you think that since you flashed a Captivate ROM on an I9000 that the home button wouldn't work since the Captivate doesn't share the same home button? Logically I would try looking for what the combo is for the Captivate to get into download or recovery mode. Now, I may be wrong and it may not work if the captivate uses its home button to enter the home button but it's worth a shot.
Edit: I just checked here and it says you hold both the volume up and volume down button while you press the power button. Try that.
With the device off, try holding both vol + & - then plugging in usb cable. Thats how a captivate enters download mode. If flashing the i9000 on captivate changes the button sequence it could not hurt to try.
Sent from my SAMSUNG-SGH-I897 using XDA App
@ Bell & foom....
I understand both your thought pattern and YES this was mine also...
However thus far no combinations have worked, still continually looping the at&t logo.
If I plug in the charger or USB whilst its doing this it kills the device, it wont switch on...
Knowing the different CAPTIVATE button comb. to recovery or download mode would be a big help right now.. also how the buttons would be mapped... i.e Captivate rom. on GALAXY S device?
How would one fix a captivate that was continually re-booting at operator logo start-up? Might be another way to angle this?
Thanks....
Think u are better off paying the guys at samsung or phone repair store to load the right firmware back in if u dont have the 3 btn combo...
Sent from my GT-I9000 using XDA App
try downloading that one click unroot program, plug the sgs into the computer and then force unroot, although the unroot won't work it should then allow the sgs to enter recovery mode.
Unfortunately my PC is not recognising the phone...
Plugging the USB in while the phone is switched OFF does nothing....
lugging the USB in while the phone is switched ON.. Turns it off...
Same things happen when the Charger is plugged in.. Althou the phone seems to still charge!!!
Arghhh..
Thanks for your suggestion thou.. Any more help/ ideas are welcomed...
Last resort maybe try heating up the phone like the others did to force download mode?
Sent from my GT-I9000 using XDA App
so any news on this? i too have successfully flashed the captivate rom on my unbranded i9000 the official repair shop i first took it to (mttc <Lithuania>) told me that it needs a new motherboard, and it would cost me 700LTL(270 $us)... kinda sounded like bull****, so a week ago i took it to a private repair shop, they said they had jtag, so i should be hearing from them this week, if not, i'll buy the stupid riff box myself and repair it..
no button combination worked for me, and the symptoms were exactly the same, flashing att, usb kills it etc. etc.
well, my advice would be to keep contacting different local repair shops, and asking do they have a jtag that supports the samsung galaxy s, if they do, the repair shouldn't cost more than 25$, at least thats what I've been told. good luck, and stay in touch, update on your process, cause the number of people flashing the wrong rom on the i9000 is horrifying.
it kinda sux that its so easy to brick the sgs... and its wrong for people to state that "if you have 3button combo enabled, you are safe", well thats just bull****.
No GOOD news as of yet, but I am in the process of to admitting my SGS to a official samsung service centre.. I was also thinking of sending it directly to them for repair...
???
Still been trying some other things to try and jump-start this blasted thing in the meantime but NOTHING IS WORKING!!!!
I to am thinking about purchasing this riff box or JTAG but it would be for a ONE TIME USE only... Seems like a waste of money when I can just claim a new SGS through insurance only thing is playing the WAITING GAME!!!
I Shall definitely update this thread with any progress made in the coming days...
Here I was thinking I was a lone soldier with this dilemma...
Also I agree... SGS = Too easily bricked.. and no solution?? Other than splashing out 100+ £/$... in your words truly SUXXXXXXX!!!!
Konshens said:
Also I agree... SGS = Too easily bricked.. and no solution??
Click to expand...
Click to collapse
Sorry, but ANY phone (or even any electronic component for that matter) is easily bricked if you flash firmware from a completely different device onto it.
Electroz said:
Sorry, but ANY phone (or even any electronic component for that matter) is easily bricked if you flash firmware from a completely different device onto it.
Click to expand...
Click to collapse
well, afaik, its very hard to fully brick a new htc device.
anyway, i suggest you try finding a jtag repair shop first, as samsung will take a lot of time to "repair" it, or even tell you that it needs a new motherboard..
This is my second SGS with this problem and I am trying to determine if it is common or if I am just monumentally unlucky.
During normal use the bottom soft keys (menu and back) will become non-functional. One will stay lit and one will go out, but both will cease to work. Everything else on the phone is still responsive, sometimes the keys 'revive' themselves after a short period of time, other times I need to lock the phone to get them back.
I got this phone (a replacement) on the 6th, and this started on the 12th and has been happening more and more often ever since. Has anyone else seen this or have an idea what it may be? Or is this phone is destined to be my 2nd DOA in a month?
Here is a video showing the problem: '
you tube.com/watch?v=1s-wqWsHaIs
That is definitely not normal behaviour.
Exact same problem here; it seems to happen when I'm using the phone quite a bit but when I leave the phone alone for awhile, problem seems to go away then return because I'm using it too much.
// galaxy s
hol17 said:
Exact same problem here; it seems to happen when I'm using the phone quite a bit but when I leave the phone alone for awhile, problem seems to go away then return because I'm using it too much.
// galaxy s
Click to expand...
Click to collapse
FYI: Samsung support told me to return my phone.
It is almost like one of the soft keys gets stuck 'down', because it is the same behavior if you just hold down one of the keys. Mine seems to happen more when bluetooth is on and it comes and goes in spurts; good for an hour, bad for an hour, etc.
ETA: I am sure now that the soft keys are getting 'stuck down'. I have seen it 3 times now where I would press the left soft key and the light on the key will remain out, then after a second or so the quick search screen comes up and the left soft key light is still out.
any solution to this problem? i seem to have a slightly different issue
this just happened to me recently everything was working fine until this morning when i tried to press the menu and back buttons it wouldnt work, although the buttons light up and is registering my actions when i press them the light turns off and let go is lit up again.
could this be a software issue or something conflicting with my lednotification mod?
please reply ^_^
I've got the exact same issue with my soft keys getting stuck too. Just started a couple days ago, phone's less than a month old. I was also told to take my phone in for repairs.
Oh one tech support guy told me that Froyo might fix it... I'm kinda hoping for that, seeing as how this issue isn't exactly 100% reproducible for the warranty service department
I have the same problem its almost like the soft key is being held down, anyone find a fix for this?
Add me to the list
Add another one to the list. I too am experiencing this problem and I'm unfortunately screwed because of it. I attempted to return the phone, however the store in question refused to accept it because they tested it and found it had been unlocked. Two week old phone on stock FW bought outright ($600) and they won't replace it.
Unbelievable!
robcarey said:
Add another one to the list. I too am experiencing this problem and I'm unfortunately screwed because of it. I attempted to return the phone, however the store in question refused to accept it because they tested it and found it had been unlocked. Two week old phone on stock FW bought outright ($600) and they won't replace it.
Unbelievable!
Click to expand...
Click to collapse
Lock it back and go again.
I know this post it's a bit old, but i was harvesting the web looking for an answer to my problem that seems to be the same posted here.
I have a i9000T with eclair 2.1 and soft keys get stuck now and then. I couldn't find a way to reproduce this behaviour.
Recently (yesterday) i flashed a new 2.3.3 firmware hoping this curse to end. The problem seems to persist, but in some situations that i asume for a bad flashing (i didn't repartition neither wipe the phone before flash).
Anyway, can anybody tellme if this is a software or hardware issue? I'll have to return my phone or this is going to be 'fixed' with a nice flash?
Thanks.
cknu said:
I'll have to return my phone or this is going to be 'fixed' with a nice flash?
Thanks.
Click to expand...
Click to collapse
Only one way to find out mate.
You need to flash a 2.1 rom that consists of 3 files. 512 pit and re-partition.
Should get you back on track again.
I did flash it again with the 2.3.3 JVH, a few moments ago. Also did a repartition and wipe data and cache. It seems nice, but in a few minutes the same happend. Now, when i press the menu button it takes a nice screenshot of the phone. xD
I need to flash to a 2.1 version? Why is this? I thought flashing with any rom will work.
Thanks.
Solution to this problem!
Hey all - I found a solution to this problem - I can confirm this has fixed the problem on TWO phones for me - read the whole thread as this fix doesn't like custom firmwares, but works fine with all the regular FWs I've downloaded.
Works perfect - and simple fix!
http://forum.xda-developers.com/showthread.php?t=869492
^^^
Do not do this unless you have a i9000m. You will break your buttons.
electrotune1200 said:
^^^
Do not do this unless you have a i9000m. You will break your buttons.
Click to expand...
Click to collapse
Too bad i didn't see this before
I have I9000T used this 2663 method and now my soft buttons doesn't work anymore...
Didn't find a clear solution in the forums so i want to ask, like i said my phone is a I9000T with official 2.2.1 (UBPJA) rooted using SuperOneClick and unlocked editing the nv_data.bin file.
I was thinking on doing a hard reset to get back to the factory defaults but i see many ways of doing it that it gets confusing... i see peolple doing it through the privacy menu but i think that only erase data and doesn't restore anything OS wise, also see other people doing it using volume + home + power and selecting later clear storage, i think this is the same that the option in the privacy menu, and finally i see some people typing this code *2767*3855# what is the proper way to get back to the original OS in my case?
Thanks in advance...
Firstly, may I apologise, I know this has been covered, I've trawled the internet for hours but just can't seem to get an answer.
I recently updated my UK, unlocked Galaxy S to Froyo via the registry hack, all was fine (ish). Because Froyo had been delayed in the UK and wasn't as great when it was running on my phone I thought it would be safer to revert back to 2.1 and wait until the official UK release came out (I know some will ask me why I did this, I just felt that Froyo was held back for a reason and I couldnt get an answer as to if I could update to the UK version if I already had the Scandinavian one). So I did the reg hack again and was offered 2.1. Everything seemed to go smoothly until the phone rebooted after downloading from Kies. Now the phone's animation starts then the flashing S symbol displays for an extended time. After that, the screen goes black. If I touch the two touchscreen buttons they stay on but do not go off. If I hold the power button the phone turns itself off and when the phone is powered off and I plug it into my PC with a USB, the battery charging sign comes on.
The phone was rooted and I did have the OCLF on but uninstalled that and un-rooted before changing the firmware so it was back to stock.
Before I get 20 people telling me to put the phone in download/recovery mode I must tell you that I can't. My phone has never been able to do it. I've tried every single way and button order suggested. I'm not the only one who's phone won't do it either so it's not just me. The only way I ever saw recovery mode on my phone was when I used the one click root on the PC.
I'm at a total loss. Debugging was turned off because Kies won't let you do anything with it turned on and so ADB recovery is out also.
Please help if you can.
Many thanks,
Ryan
Boot to download mode, do a repartition with Odin and 512 pit flash, remove battery and boot again to download mode and then do a odin firmware flash to which ever firmware you want.
thanks intratech but I can't boot the phone into recovery or download mode (sorry should have stated that). Believe me, I have tried every combination. I did a lot of research and discovered that there are quite a few people for whom that feature was disabled.
if the 3 button combo is not working on your phone, you should not do these risky stuff actually
take a look at this thing
http :/ / forum.xda-developers.com/showthread.php?t=819551
remove spaces
thanks Noobproof. I remember coming across that thread last night. Although I consider myself ok with software, soldering and slicing just isn't my forte. I haven't got a clue about soldering, etc. I've just come back from the Carphone Warehouse (Samsung suggested I go there as they are the service centres listed on the Samsung UK website). The engineer had the phone for half hour and said that the "board was faulty". Haven't got a clue what he meant by that, unless he meant the internal SD which a few people have had go on them. Anywho, he told me to ring Samsung and send it in for a repair. I did that and need to send my phone special delivery to a company called regenersis in Scotland.
I knew rooting and flashing custom roms was a risk, that's why I never touched Odin,etc. I used Kies to upgrade to Froyo and Kies to downgrade back to Eclair. You would think that sticking to official Samsung software would be safe. I must admit, when it was going well I loved my Galaxy but more and more I'm starting to wish I'd opted for the Iphone.It just seems that there have been so many glitches and bugs, I mean, why should there ever be a need for lag fix in the first place? I often found myself keeping my fingers crossed when downloading simple apps as that was usually touch and go!
Feeling a bit deflated now. Was hoping some clever boffin had designed a software solution that would recognise the phone and force it into download/recovery mode.
Ah well, thanks for taking the time to respond anyway.
Best wishes,
Ryan
You know i was very happy when i for the phone for the first time and while i was doing a research (i live in turkey and there is no stock android market here) i came along this forum. And i have learned that i havent got the 3 button combo. I downloaded the 3 button fix abd took the phone to samsung centre.
They told me that they cannot flash it and i made a huge fight then they accepted and i have my 3 buttons. Never give up your phone. I dont think the internal sd is faulty it is just corruppted if you can access the recovery menu you could fix it. Any way you have to find a service centre that has an anyway jig box other a jtag box otherwise they will have to replace the motherboard. Good luck
Sent from my GT-I9000 using XDA App
I had the same problem all i did was use a different firmware .. didnt choose anything in pitfile and did not check on repartition but checked only F reset and Auto reboot and flashed my phone and voila it booted perfectly fine
Hope it helps others with black screen problem after booting
thanks
mike
I had the same problem too. This method really works.
Wysłano z GT-I9000 z użyciem Tapatalk
Hi guys,
I recently used rom manager and flashed the wrong clock work mod to my phone, more or less trying to get cm7/9 on my galaxy s captivate, now my phone does not get past the 'Samsung SGH I896' Screen, hard reset does nothing, tried all the key combinations, I work in technical support for all types of phones, and yet I don't know what really can be done with this. I suppose I may be sol. Any input would be appriciated thanks guys.
Try to get your phone into download mode by:
Breathe
Taking out battery
Plug phone into computer
Hold down vol+ and vol-
Insert battery
If it goes into download mode then flash back to stock and stop using Rom Manager. It has nothing for our phones. You can find one-clicks back to stock in this thread
If you can't get it into Download mode that way, you'll want to build/buy a jig.
Thanks for the input, Ill try that out.
If you can't get into download mode, buy yourself a jig to force download mode. works like a charm and they're only about 5 usd
Well then, I've got it into download mode now im just like durr, I have no idea how to get the software on there through kies, I watched that video and im not afraid to admit im a noob at this stuff, my carrier is rogers in canada how do I get the software back on this phone. The one click's aforementioned are for american i897's and I don't think they'd have the proper carrier settings on them.
Excellent, after perving the forums a bit I found a one click fix for the phone and now its fired up and alive again thanks guys <3
You're in luck my beaver-lovin friend.
Another Canuck on the board made some One-clicks to fix problems like yours.
http://forum.xda-developers.com/showthread.php?t=979133
Yeah I noticed those, I work for Rogers WCTS at there corporate centre so these experiences are definitely beneficial. Atleast now I know how to force this phone into download mode, I bet ill save a 100 phones at my job doing stuff like this now xD
C9
Well. You could also try using Odin to flash it? Have you looked into that?