Firstly, may I apologise, I know this has been covered, I've trawled the internet for hours but just can't seem to get an answer.
I recently updated my UK, unlocked Galaxy S to Froyo via the registry hack, all was fine (ish). Because Froyo had been delayed in the UK and wasn't as great when it was running on my phone I thought it would be safer to revert back to 2.1 and wait until the official UK release came out (I know some will ask me why I did this, I just felt that Froyo was held back for a reason and I couldnt get an answer as to if I could update to the UK version if I already had the Scandinavian one). So I did the reg hack again and was offered 2.1. Everything seemed to go smoothly until the phone rebooted after downloading from Kies. Now the phone's animation starts then the flashing S symbol displays for an extended time. After that, the screen goes black. If I touch the two touchscreen buttons they stay on but do not go off. If I hold the power button the phone turns itself off and when the phone is powered off and I plug it into my PC with a USB, the battery charging sign comes on.
The phone was rooted and I did have the OCLF on but uninstalled that and un-rooted before changing the firmware so it was back to stock.
Before I get 20 people telling me to put the phone in download/recovery mode I must tell you that I can't. My phone has never been able to do it. I've tried every single way and button order suggested. I'm not the only one who's phone won't do it either so it's not just me. The only way I ever saw recovery mode on my phone was when I used the one click root on the PC.
I'm at a total loss. Debugging was turned off because Kies won't let you do anything with it turned on and so ADB recovery is out also.
Please help if you can.
Many thanks,
Ryan
Boot to download mode, do a repartition with Odin and 512 pit flash, remove battery and boot again to download mode and then do a odin firmware flash to which ever firmware you want.
thanks intratech but I can't boot the phone into recovery or download mode (sorry should have stated that). Believe me, I have tried every combination. I did a lot of research and discovered that there are quite a few people for whom that feature was disabled.
if the 3 button combo is not working on your phone, you should not do these risky stuff actually
take a look at this thing
http :/ / forum.xda-developers.com/showthread.php?t=819551
remove spaces
thanks Noobproof. I remember coming across that thread last night. Although I consider myself ok with software, soldering and slicing just isn't my forte. I haven't got a clue about soldering, etc. I've just come back from the Carphone Warehouse (Samsung suggested I go there as they are the service centres listed on the Samsung UK website). The engineer had the phone for half hour and said that the "board was faulty". Haven't got a clue what he meant by that, unless he meant the internal SD which a few people have had go on them. Anywho, he told me to ring Samsung and send it in for a repair. I did that and need to send my phone special delivery to a company called regenersis in Scotland.
I knew rooting and flashing custom roms was a risk, that's why I never touched Odin,etc. I used Kies to upgrade to Froyo and Kies to downgrade back to Eclair. You would think that sticking to official Samsung software would be safe. I must admit, when it was going well I loved my Galaxy but more and more I'm starting to wish I'd opted for the Iphone.It just seems that there have been so many glitches and bugs, I mean, why should there ever be a need for lag fix in the first place? I often found myself keeping my fingers crossed when downloading simple apps as that was usually touch and go!
Feeling a bit deflated now. Was hoping some clever boffin had designed a software solution that would recognise the phone and force it into download/recovery mode.
Ah well, thanks for taking the time to respond anyway.
Best wishes,
Ryan
You know i was very happy when i for the phone for the first time and while i was doing a research (i live in turkey and there is no stock android market here) i came along this forum. And i have learned that i havent got the 3 button combo. I downloaded the 3 button fix abd took the phone to samsung centre.
They told me that they cannot flash it and i made a huge fight then they accepted and i have my 3 buttons. Never give up your phone. I dont think the internal sd is faulty it is just corruppted if you can access the recovery menu you could fix it. Any way you have to find a service centre that has an anyway jig box other a jtag box otherwise they will have to replace the motherboard. Good luck
Sent from my GT-I9000 using XDA App
I had the same problem all i did was use a different firmware .. didnt choose anything in pitfile and did not check on repartition but checked only F reset and Auto reboot and flashed my phone and voila it booted perfectly fine
Hope it helps others with black screen problem after booting
thanks
mike
I had the same problem too. This method really works.
Wysłano z GT-I9000 z użyciem Tapatalk
Related
PLEASE HELP: Calling all experts!!!
After installing the: [STOCK ROM] Odin3 One-Click Downloader and Drivers CAPTIVATE ONLY
My Galaxy S 19000 is stuck on the at&t boot screen.. the at&t logo just keeps flashing...
I cannot get into download mode...
PC is not recognising phone via Kies, odin or anything else...
Something tells me I have made a huge mistake somewhere along the line.. any fix???
Thank you
If no recovery/download mode working...
Only UART/JTAG, check on progress on this.
Thank you for your help...
Quite expensive options aren't these, GOOD THING I HAVE INSURANCE!!!
There must be a software way around this thou...
HELP!!!!
If your phone can't get into download mode due to it being disabled it looks like your pretty much screwed. You could phone samsung and see if they'd fix it.
Sent from my GT-I9000 using XDA App
If you can get to the AT&T logo part, I'm assuming you should still be able to get to download mode. Did your phone have dl mode before?
Thread moved to Q&A section
Yes my phone could get into dl mode b4 but now it doesn't work any more, phone just keeps on showing at&t logo and rebooting.
When I put the USB lead in the phone does not switch on at all..
thanks 2 all for assistance in this horrible mess negligence has left me in.
the USA models goes into download mode by using the volume up + volume down + power
see if that works
Thanks for your reply...
no joy... any other viable button combinations I could try? I've already tried many to no avail...
I'm no expert on the matter but don't you think that since you flashed a Captivate ROM on an I9000 that the home button wouldn't work since the Captivate doesn't share the same home button? Logically I would try looking for what the combo is for the Captivate to get into download or recovery mode. Now, I may be wrong and it may not work if the captivate uses its home button to enter the home button but it's worth a shot.
Edit: I just checked here and it says you hold both the volume up and volume down button while you press the power button. Try that.
With the device off, try holding both vol + & - then plugging in usb cable. Thats how a captivate enters download mode. If flashing the i9000 on captivate changes the button sequence it could not hurt to try.
Sent from my SAMSUNG-SGH-I897 using XDA App
@ Bell & foom....
I understand both your thought pattern and YES this was mine also...
However thus far no combinations have worked, still continually looping the at&t logo.
If I plug in the charger or USB whilst its doing this it kills the device, it wont switch on...
Knowing the different CAPTIVATE button comb. to recovery or download mode would be a big help right now.. also how the buttons would be mapped... i.e Captivate rom. on GALAXY S device?
How would one fix a captivate that was continually re-booting at operator logo start-up? Might be another way to angle this?
Thanks....
Think u are better off paying the guys at samsung or phone repair store to load the right firmware back in if u dont have the 3 btn combo...
Sent from my GT-I9000 using XDA App
try downloading that one click unroot program, plug the sgs into the computer and then force unroot, although the unroot won't work it should then allow the sgs to enter recovery mode.
Unfortunately my PC is not recognising the phone...
Plugging the USB in while the phone is switched OFF does nothing....
lugging the USB in while the phone is switched ON.. Turns it off...
Same things happen when the Charger is plugged in.. Althou the phone seems to still charge!!!
Arghhh..
Thanks for your suggestion thou.. Any more help/ ideas are welcomed...
Last resort maybe try heating up the phone like the others did to force download mode?
Sent from my GT-I9000 using XDA App
so any news on this? i too have successfully flashed the captivate rom on my unbranded i9000 the official repair shop i first took it to (mttc <Lithuania>) told me that it needs a new motherboard, and it would cost me 700LTL(270 $us)... kinda sounded like bull****, so a week ago i took it to a private repair shop, they said they had jtag, so i should be hearing from them this week, if not, i'll buy the stupid riff box myself and repair it..
no button combination worked for me, and the symptoms were exactly the same, flashing att, usb kills it etc. etc.
well, my advice would be to keep contacting different local repair shops, and asking do they have a jtag that supports the samsung galaxy s, if they do, the repair shouldn't cost more than 25$, at least thats what I've been told. good luck, and stay in touch, update on your process, cause the number of people flashing the wrong rom on the i9000 is horrifying.
it kinda sux that its so easy to brick the sgs... and its wrong for people to state that "if you have 3button combo enabled, you are safe", well thats just bull****.
No GOOD news as of yet, but I am in the process of to admitting my SGS to a official samsung service centre.. I was also thinking of sending it directly to them for repair...
???
Still been trying some other things to try and jump-start this blasted thing in the meantime but NOTHING IS WORKING!!!!
I to am thinking about purchasing this riff box or JTAG but it would be for a ONE TIME USE only... Seems like a waste of money when I can just claim a new SGS through insurance only thing is playing the WAITING GAME!!!
I Shall definitely update this thread with any progress made in the coming days...
Here I was thinking I was a lone soldier with this dilemma...
Also I agree... SGS = Too easily bricked.. and no solution?? Other than splashing out 100+ £/$... in your words truly SUXXXXXXX!!!!
Konshens said:
Also I agree... SGS = Too easily bricked.. and no solution??
Click to expand...
Click to collapse
Sorry, but ANY phone (or even any electronic component for that matter) is easily bricked if you flash firmware from a completely different device onto it.
Electroz said:
Sorry, but ANY phone (or even any electronic component for that matter) is easily bricked if you flash firmware from a completely different device onto it.
Click to expand...
Click to collapse
well, afaik, its very hard to fully brick a new htc device.
anyway, i suggest you try finding a jtag repair shop first, as samsung will take a lot of time to "repair" it, or even tell you that it needs a new motherboard..
The USB cord was removed from my phone in the middle of an Odin restore (it was stuck at factoryfs.rfs). Now the phone won't boot and it isn't recognized by my computer when plugged in. Did I find a way to brick this thing? Any help would be appreciated. This is my fourth Captivate and I'm sure AT&T is going to start to give me a hard time. Thanks.
build a jig or buy one on ebay. you need to get into download mode and reflash to sotck.
http://cgi.ebay.com/ws/eBayISAPI.dl...47234&ssPageName=STRK:MESELX:IT#ht_511wt_1139
http://forum.xda-developers.com/showthread.php?t=731989
Try all 3 methods to get into download mode first
yes, you can try the key combo first. but as i know, build 1010 or later wont work for the key combo.
Got it back to d/l mode. Now it's stuck at factoryfs.rfs-same as last time. I'm finished with this phone. AT&T can send me another. This is what happened to the past two phones. Stuck on a Odin restore and can't get it up again.
Edit: Just booted up. That's a relief. Thanks.
Thare187 said:
Got it back to d/l mode. Now it's stuck at factoryfs.rfs-same as last time. I'm finished with this phone. AT&T can send me another. This is what happened to the past two phones. Stuck on a Odin restore and can't get it up again.
Click to expand...
Click to collapse
If it had happened on more than one phone, you may consider looking at odin...maybe remove and reinstall our check your drivers or computer...just double check all of little stuff that might be so obvious that they are not obvious
********
Sent from my Samsung Captivate using the XDA app
ROM: Paragon RC5 1200 mhz/100hz kernel
so if your potentially bricking the phones, what do you tell AT&T that happened? and do they not ever check or whats the deal?
As far as I know at the wareenty centers they check for physical and water if they do attempt to boot as long as nothing looks custom they wont bother with checking the recovery or key combos samsung takes care of the rest they just want functional hardware..oh dont mention anything about modding. If anything syncing crashed is the best explaination. Tested.
Sent from my replaced cappy XD
Just dont become a familair face or it might get flaged on your account. Study up before doing somthing new. Just crashed my test cappy writing this had to stop and reflash heh live and learn.
A tech here on the forums said they can tell if it has been modified in just "3 clicks".
Sent from my SAMSUNG-SGH-IDK?
noobfail said:
A tech here on the forums said they can tell if it has been modified in just "3 clicks".
Sent from my SAMSUNG-SGH-IDK?
Click to expand...
Click to collapse
Lol....uh huh....i also have a direct line to the white house
********
Sent from my Samsung Captivate using the XDA app
ROM: Paragon RC5 1200 mhz/100hz kernel
Omg really?!
Sent from my SAMSUNG-SGH-IDK?
Just messin' around....what kind of tech? Att, samsung or other?
********
Sent from my Samsung Captivate using the XDA app
ROM: Paragon RC5 1200 mhz/100hz kernel
He said he was a manager of an actual at&t walk in tech support store.
I rooted a phone and flashed to stock and returned it with no problems.
Sent from my SAMSUNG-SGH-IDK?
Sorry I'm late getting back. My phone is up and running again. Got in to D/L mode and flashed back to stock. Got stuck on the AT&T logo, but used Odin one more time and it booted right up. The first time I brought in the phone, the tech took it to the display for 2 minutes and called the warranty dept for me. I think that it helped that the Chiefs playoff game was on. They didn't seem to want to be bothered! The phone rep asked about water and physical damage. No questions about modding. The second time I did it at home over the phone. Again, no questions about modding. I told the rep both times that I was trying to transfer music to the phone via Kies and it crapped out on me. It always help to play dumb and act like you don't know too much.
Thare187 said:
Sorry I'm late getting back. My phone is up and running again. Got in to D/L mode and flashed back to stock. Got stuck on the AT&T logo, but used Odin one more time and it booted right up. The first time I brought in the phone, the tech took it to the display for 2 minutes and called the warranty dept for me. I think that it helped that the Chiefs playoff game was on. They didn't seem to want to be bothered! The phone rep asked about water and physical damage. No questions about modding. The second time I did it at home over the phone. Again, no questions about modding. I told the rep both times that I was trying to transfer music to the phone via Kies and it crapped out on me. It always help to play dumb and act like you don't know too much.
Click to expand...
Click to collapse
I had the same exact problem when i was just starting to mess around with roms and my biggest issue was the sequence that it took to flash properly. i kept opening odin then putting my phone in download mode and THEN plugging it into use as opposed to how it should have been which is holding vol up and vol down pressed then plugging in usb.
bugity said:
I had the same exact problem when i was just starting to mess around with roms and my biggest issue was the sequence that it took to flash properly. i kept opening odin then putting my phone in download mode and THEN plugging it into use as opposed to how it should have been which is holding vol up and vol down pressed then plugging in usb.
Click to expand...
Click to collapse
That's the weird thing. I'm somewhat new, but have been flashing my Captivate since Sept. When the original Cognition came out I was flashing daily. I think my problem was, it took longer than usual to flash to stock, I got impatient and didn't realize I could get to D/L mode by taking the battery out, holding power and inserting battery. I always used the button combo. Live and learn.
same problem
Ok i have the same problem as the original post stated, running odin and disconnected right at the beginning of the rom flash! this phone wont power up, and my jig (which i have used before) will not work! Is it done for!?
Ur last hope lays in adams Am I bricked thread, where u'll find an app that checks what state ur phone is in (linux or ubuntu needed)
nevermind, I tried harder and the jig worked, its one of the homemade jigs, where you cut up your charger, and use resistors to create the circut . . . . jankety but i got it to work thanks anyway though
Glad you got it, but I would buy a jig and keep it in a drawer. Just in case.
surprised it took this long, had counted myself one of the lucky ones.... even though i was one of the unfortunate saps whose phone came with the three button recovery disabled, (a two week trip to samsung for repair).... was running darky's rom 9.3 and various eaarlier versions since october with no problems... today google voice started force closing so i tried to reboot the phone and it would not boot up again... i went into recovery and tried a wipe, still no go.... then i tried to reinstall the rom, still no go.... when it is booting up it just keeps looping the loading screen and vibrates once, then pause, then three times... i can get into recovery and download mode.
anywhose my questions are this,
A) best way to determine that the SD is in fact bricked.....
B) best way to get a bricked SD card back to stock so i can send it back to samsung for warranty.
C) if i get it back fixed from samsung, should i try to off this piece of Sh*t phone that has given me, and others soooooo many problems. that is to say, has anyone who has had their phone fixed recently had their new SD card go corrupt again??
P.S. never buying anything samsung ever again, PERIOD!!, had a 30 inch monitor of theirs recently go bad as well, like i dont care if they cure cancer, bring peace to the middle east, and resurrect jesus!!! i still wouldnt buy a rememberance day poppy from them!!!!!!!
Sounds similar to mine when it bricked. The best solution is to use Odin and flash jl2 onto it and send it in for repair.
They were doing a replacement and compensation program through bell for a while but I think that's over now.
On the plus side, since my repair in December the phone has been amazing. No problems flashing different roms many times. The phone has been better than I expected! The number of phones dying from this issue have dropped significantly since the new year.
Sent from my GT-I9000 using XDA Premium App
is there a link you have to flashing this frimware with odin? never used it before....
hope the replacement and compensation is still going on, kinda pissed that bell didnt call me about it...
tried flashing JL2 with odin, when i have odin open and my phone in download mode, and i plug the phone in, windows does not recognize my device and thus does not install drivers for it and thus im pooched.... ergo vis a vis help please
i know im just talking to myself but just in case anyone wants to know, installed kies to get usb working, flashed JL2, gonna take phone in for repair now (2nd time) awesome!!!
Sorry it took me a while to reply. Forgot to check this thread. There are a bunch of threads about dealing with it. If you get a hard time there's a thread you can search for about filing a complaint to the ccts. That would get you the replacement and comp I think. Good luck!
Sent from my GT-I9000 using XDA Premium App
So a few days back i flashed the serendipity VII rom on to my previouly 2.2 Cappy, and it worked like a charm... a day later i was experimenting with a few ROMS all 2.3, and they worked, and to my luck I flashed a 2.2 ROM (Cognition 4) (by mistake i might add) and there it was a complete black screen brick!
since then Iv tried various methods to bring it back to life, the 3button thing, the taking the battery out holding down the 3 buttons connecting the usb and putting the battery back in, then releasing power only... Iv tried to even get it JTAGed, which was a disaster since the JTAG guy tried and cudnt get the thing to show connectivity... ANY HELP??
I fail to accept that this is the end... Please HELPP!!!!!
just keep trying to get into dl mode by using other usb ports, a jig, holding buttons while battery removed and install battery then plug in phone, happened to me plenty of times but was persistant that it finally got into dl mode.
Try making a jig and putting phone in download mode then flash stock through odin -- do a search for jig in the captivate forums. It saved me many times. You can even make one for about $1.
If you had gingerbread then you may need to use the i9000 version of entering download mode. The key combination is different. Search around on the forum as plenty have already mentioned what it is. I just don't remember off the top of my head.
if it will not power on at all....it doesnt look good.
try holding volume down and power...see if that brings up download mode. a jig is only $8 shipped to your home and will work.
i had a similar scenario and a jig brought my cappy back to life!! ive had the same phone since september, the jig has saved me from at least 8 new phones
I have seen a black screen for download mode. The only way I knew I was in download was when I saw the yellow band appear in Odin. Open Odin, and try different button combinations that will get you into download mode until you see Odin recognize your phone.
I'm sure you've tried, but these are 2 other key combos. I've had that happen to me in the past and it can be frustrating.
1. volume up + volume down
2. volume down + power
3. volume down + home (softkey) then power (this is the one that worked for me)
4. volume down + menu (softkey) then power
Hope everything works out for you. If all else fails, I'm sure a jig will work.
I learned this in the days of old, when we were flashing the baked Froyo's. Don't know if it applies or if you've tried it already, but what used to work for me was:
Open Odin
Pull the battery out, put it back in...don't turn it on.
Hold the volume down button
Plug in the usb
At no point in the process should you ever touch the power button. For your Odin version, I'd recommend using the Stock Odin, get factory and then try flashing your custom Rom again.
(Edit: I say volume down because that's the current button to enter download mode with Gingerbread. It used to be Volume Up and Down at the same time.)
ok first this does not belong in the dev section! belongs in Q&A so thing will get closed pretty soon. also other than a correct jtag u cant recover with jig, button combo or voodoo magic. u just mixed a i9000 GB bootloader along with a captivate froyo secondary boot which the Cog4 ROM has. use search and i think you can find someone who offers a jtag service
Well, I've seen a few mention it, but I think your going to need to make or puchase a jig. Hit radioshack and get 3 100kohm resistors, about $1. The directions are all over the forums here. I'd be willing to bet that will fix you up.
Also, once in a while it may still be alive even though the screen is black. Like someone else said, go ahead and start Odin, then plug your phone into USB. See if there is any response from Odin. It's worth a shot.
Either way, it's good to have a Jig handy.
claim warranty.
Odin 1 click to stock then start from scratch!
EsotericSYN said:
Odin 1 click to stock then start from scratch!
Click to expand...
Click to collapse
you need dl mode to do that, he's not even getting power up. go to att store and say it wont turn on today gimme replacement.
How did someone with just 2 posts make a thread in here? I thought you had to have 10+ posts just to post in a thread.
just contact samsung the captivate should be in warraty untill oct2011.. i also bricked my phone while on serendipity VII see Q&A Soft brick or hard Brick.i had my phone stuck on the battery charge screen. was not able to get to download mode or recovery and my battery wouldnt charge . so i called samsung just gave them my imei number and they said it was under warranty until oct 2011. i did not tell them i bricked it while flashing roms. i just told them my phone wont charge or turn on. i sent my phone to the samsung repair center in dallas tx. my phone was fix at no charge even though i had it rooted and running a custom rom. samsung just fixed my looping battery screen and put there stock froyo erasing all my apps and data.it took about 2 weeks to get all this done. got my phone back this monday and everything is working great....
so just contact samsung and say the phone wont turn on dont say you rooted it or flashed a room. samsung wont check to see if its rooted all they care about is that you didnt drop the phone or something like that.
cremefraiche said:
ok first this does not belong in the dev section! Belongs in q&a so thing will get closed pretty soon. Also other than a correct jtag u cant recover with jig, button combo or voodoo magic. U just mixed a i9000 gb bootloader along with a captivate froyo secondary boot which the cog4 rom has. Use search and i think you can find someone who offers a jtag service
Click to expand...
Click to collapse
listen to this man
Same exact thing happened to me on my last phone. Your phone is dead, dead, dead. Hard bricked. Nothing will bring it back. Take it to an AT&T store and tell them you were upgrading to 2.2 and the screen went black and now it wont come back on.
There is no jig or JTAG that will fix it, trust me, I tried
timbrendelaz said:
Same exact thing happened to me on my last phone. Your phone is dead, dead, dead. Hard bricked. Nothing will bring it back. Take it to an AT&T store and tell them you were upgrading to 2.2 and the screen went black and now it wont come back on.
There is no jig or JTAG that will fix it, trust me, I tried
Click to expand...
Click to collapse
at&t might help, but you have to hassle alot.Just contact samsung they will help for sure.i just sent them my bricked phone and they fixed it in two weeks at no charge. samsung will do it for free, im living prof.
I dont really buy into the fact that its dead, no way... its just that the revisions on the boot.bin and sbl.bin are different... shouldn't JTAG work? and cant claim warranty cuz im not in the US!!! there must be a way people.... im faar too poor to just give up without a fight!!!
Well guys I’ve been reading this forum front to back for over a week and was scared as hell to mess with my phone, but I really wanted ICS and some of the other nice software I’ve seen here.
Firmware: 2.3.3
Baseband: I9000DXJV9
Kernel Version: 2.6.35.7-I9000DXJV9-CL216763
[email protected] #2
Build Number: GINGERBREAD.DXJV9
I wanted to start simple with a CF root. I’ve read the flashing instruction so many times I thought I could do it in my sleep. So I backed everything up, turned the phone off and back on in DOWNLOAD, started Odin 1.82, loaded the CF root for JVQ (which is as close as I could find worked with my phone), then I attached the USB cable. The first time it started to flash, but it immediately hung while trying to start a connection. I unplugged and the phone was still fine. Started over and this time I saw the drivers install and thought now it should be OK.
Loaded the CF root JVQ in PDA, left everything as default (re-partition unchecked) and the other two checked. It flashed quickly and just as quickly it came up FAILED! Disconnected my phone and now I can’t even get DOWNLOAD. All I get is the silly icon of a phone with a caution triangle in the middle of a dashed line to an icon of a computer and even that won’t go away now. I remember seeing this symbol one time somewhere on this board, but don't remember where.
Looks like my worst fears have come true…a bricked phone on my first try. I never envisioned a situation where I could not get to DOWNLOAD mode and I do know where to buy a JIG, but I think it wouldn't help even in this case. Any help will certainly be appreciated.
khrfx4 said:
Well guys I’ve been reading this forum front to back for over a week and was scared as hell to mess with my phone, but I really wanted ICS and some of the other nice software I’ve seen here.
Firmware: 2.3.3
Baseband: I9000DXJV9
Kernel Version: 2.6.35.7-I9000DXJV9-CL216763
[email protected] #2
Build Number: GINGERBREAD.DXJV9
I wanted to start simple with a CF root. I’ve read the flashing instruction so many times I thought I could do it in my sleep. So I backed everything up, turned the phone off and back on in DOWNLOAD, started Odin 1.82, loaded the CF root for JVQ (which is as close as I could find worked with my phone), then I attached the USB cable. The first time it started to flash, but it immediately hung while trying to start a connection. I unplugged and the phone was still fine. Started over and this time I saw the drivers install and thought now it should be OK.
Loaded the CF root JVQ in PDA, left everything as default (re-partition unchecked) and the other two checked. It flashed quickly and just as quickly it came up FAILED! Disconnected my phone and now I can’t even get DOWNLOAD. All I get is the silly icon of a phone with a caution triangle in the middle of a dashed line to an icon of a computer and even that won’t go away now. I remember seeing this symbol one time somewhere on this board, but don't remember where.
Looks like my worst fears have come true…a bricked phone on my first try. I never envisioned a situation where I could not get to DOWNLOAD mode and I do know where to buy a JIG, but I think it wouldn't help even in this case. Any help will certainly be appreciated.
Click to expand...
Click to collapse
JIG will most likely save your day, because you can have hardbricked phone only by messing with bootloaders AFAIK. And as CF-ROOT doesn't touch bootloaders, you'll be fine..just get jig and continue flashing
ps. I assume that you have tried taking battery off, inserting it while pressing 3-button combo etc. methods which you'll find around the forum..dunno even if they actually work..
Last time i got exactly the same situation when flashing CF root for 2.3.5 XXJVS..
Try connecting the phone to the comp with the phone, triangle, and comp icon on your phone screen, see if Odin detected your phone...
If yes, you can try flashing the whole stock firmware again, it should work...
i got into that situation twice and those steps always worked for me luckily.. (it works for me, saved my bricked phone)
wish you luck
asdsadas2010 said:
Last time i got exactly the same situation when flashing CF root for 2.3.5 XXJVS..
Try connecting the phone to the comp with the phone, triangle, and comp icon on your phone screen, see if Odin detected your phone...
If yes, you can try flashing the whole stock firmware again, it should work...
i got into that situation twice and those steps always worked for me luckily.. (it works for me, saved my bricked phone)
wish you luck
Click to expand...
Click to collapse
Now your solution may be exactly what happened. I tried to connect using Kies, but my computer never even saw a device being plugged in so I never even thought to try Odin.
So I must apologize. I didn’t have the patience or perseverance to wait for an answer. I happen to live in a large city in a country that has a lot of clever tech people and phones are huge here in Thailand.
I was either going to buy a cheap phone so I could stay in basic contact until I worked through the problem with the help of this board or buy a new Galaxy S, instead I decided to see if someone here could actually get me back up and running in short order. Fortunately I found one shop that did. I watched him load up Odin, pick the PDA, PHONE, CSC and PIT files and re-partition, but I don’t know how he got a connection to Odin, because that’s where I was stuck.
I certainly could no longer get a connection via Kies or the drivers I had which were working just a short time ago. So the question I still have is how the heck did he get a connection to the phone?
Of course it would be too much to ask for him to load the original software so now Kies will not work with my phone, but that doesn’t bother me so much because I really don’t use it. He installed 2.3.2, Baseband XXJVE, Build Number XWJV1, which is a step backwards, but it works, although I’ve gotten one screen with tiny red letters in the top-left corner that said “panic kernel”, but after a reboot everything has been fine. BTW, the repair cost just under $15 USD.
Here's another question while I'm at it. What causes this to happen? I thought for sure I did everything I've read a 100 times on this board in the proper order.
Buy a Jig at eBay
Well, yes JIG will most likely save your day.
BUT
Try those meanwhile you wait for JIG:
1. take battery out and leave it few hours maybe and than try to boot download mode (increase times-hour, 2 hours, 4 hours,....)
2. press buttons for download mode (that phone and pc connected with dots and triangle will most likely appear), plug your phone to PC and try different USB ports and see if odin finds your phone, it happened to me once, however odin did
find my phone on that pic and i flashed (dunno why, maybe just luck)
3. take battery out, press buttons for download mode, and put battery back in, it can trigger download mode (found this by googleing sometime ago)
Or try google for more solutions, allthough I reccomend JIG
I know about the JIG and where to get one, but it ain't gonna happen soon and I'm sure this guy yesterday did not use one and he was confident he could restore the software and he did, so there is a way without the JIG.
gaspernemec said:
Well, yes JIG will most likely save your day.
BUT
Try those meanwhile you wait for JIG:
1. take battery out and leave it few hours maybe and than try to boot download mode (increase times-hour, 2 hours, 4 hours,....)
2. press buttons for download mode (that phone and pc connected with dots and triangle will most likely appear), plug your phone to PC and try different USB ports and see if odin finds your phone, it happened to me once, however odin did
find my phone on that pic and i flashed (dunno why, maybe just luck)
3. take battery out, press buttons for download mode, and put battery back in, it can trigger download mode (found this by googleing sometime ago)
Or try google for more solutions, allthough I reccomend JIG
Click to expand...
Click to collapse
This was a very useful reply and I thank you for it. Mail here is unreliable so I won't have a JIG until April when a friend brings one over, though Hong Kong sells most of them on eBay and some of them do deliver here free. I might try to get one from there.
Anyway, if this does happen again I have a couple of other things to try thanks to you.
I thought about Google (of course), I'm just not sure how to word the search with the phone+triangle+computer icon, but I'll give that a go also.
Kurre and asdsadas2010 also gave useful replies...Thanks.
I didn't think it would be that easy to find, but the first result in my search that popped up was this thread here: http://forum.xda-developers.com/showthread.php?t=751210 and here http://forum.xda-developers.com/wiki/How_to_get_into_download_mode
Lots of variations on similar solutions. Really no need to add to this thread anymore.
Thanks