Black housing for htc vogue - Touch CDMA Accessories

I have been trying to find BLACK HOUSING for HTC VOGUE without the DIGITIZER
I want to buy it from EBAY & it should be black
Plz guys help me out to find out 1 !!

if you haven't found one by now here is one
http://cgi.ebay.com/Full-Housing-Co...ccessories&hash=item4cea40353f#ht_5415wt_1139

Red, Black and White
Make sure you get a CDMA housing - as there were two versions of the phone and the CDMA is larger. Can get Black, White, Dark Red, and maybe Green and Grey too.
The careful parts are:
being careful with the four screws that attach the phone to the front
getting a new switch panel in place in your new case two screws and some fussing
getting a new stylus to match
and
*
*
that digitizer screen installation. There are Verizon digitizers on ebaY for about $10.00+shipping.

patelaquib said:
I have been trying to find BLACK HOUSING for HTC VOGUE without the DIGITIZER
I want to buy it from EBAY & it should be black
Plz guys help me out to find out 1 !!
Click to expand...
Click to collapse
I just bought one on Ebay for less than $20.00.. It has the buttons, frame, front, and back. It also has the digitizer.
Why don't you want the digitizer? My experience is they are hard to remove and easy to break.

Related

Blue Angel Digitizer replacement and guide

The clear plastic sheet part of my digitizer has some indents in it making my digitizer not work. I have tried to remove the plastic sheet, erroneously thinking it was the digitizer. It is removed but has left parts of the sticky tape on edges. Screen looks perfect now it is removed.
I would like to know if I require a full digitizer replacement or if it is possible just to replace this plastic screen please?
Also I was hoping that someone could point me to a good guide on the digitizer or plastic screen replacement for the Blue Angel (It is GSM version if makes any difference)
Also looking at ordering a digitizer on ebay, they do not seem to specify what model it is? Is it like the LCD screens and there are several different versions so you need to make sure that you get the correct one for your item? (My blue angel is TD035STEC1)
Thankyou in advance for any help.
Check the wiki.
In particular, check the articles in this section:
http://wiki.xda-developers.com/index.php?pagename=BA_Technical

Damaged Digitizer or LCD Screen? Help please :(

Hi,
Last night I knocked a small table and my girlfriends phone and a remote for the TV fell off.
We noticed that her phone now has a ring of black dots on the screen, mostly visible with a white background (E.G websites) but also from the home screen and the like.
We think she's cancelled her phone insurance, as she's never had a payment out to the company.
Can anyone tell me if its a Digitizer (What is one of these? Is it just the touch screen sensitive part of the phone?) Or the actual LCD Screen itself?
If you click on the photo it will load a larger image
Thanks for any assistance, kinda annoyed about this and wondering if I can repair myself with the parts on ebay. Or does anyone know how much HTC Charge to repair similar? Either in $USD, £GBP or €Eur, I can convert and get a ball park figure.
Hi
First of all is the phone still in warranty? If so take it back to an HTC dealer they should repair it for you for free. TD2 screens are not very good and it's a common fault. ( i had to have mine repaired after just only 3 weeks! )
The TD2 screen is made out of 2 parts, The touch screen or the 'digitizer' as you call it and a normal LCD screen underneath. You need to establish which has gone faulty.
If the touch screen still operates normally i.e the screen does not lock up or freeze and allows you to navigate normally then its the lcd screen below. If the touch screen is faulty one good way of checking is to put a piece of tape over the damaged area and try to lift it up a little to see if the marks / dots disappear and functionality can temporarily be restored.
Its hard to tell from your picture which it is..... sorry
I'm not sure how much a replacement by a dealer would cost, but i'm sure you can replace either yourself. ebay is a good place to look
Hope this helps.
I've had a reply from HTC UK who said the following:
That looks like there are a bunch of very small cracks in the screen. the black stuff is likely the Liquid Crystal from inside the display that has leaked out. If the dots get larger then it would definitely seem that the screen has got some cracks in it.
if this is the case, the standard charge for replacing the LCD is around £180 as sadly it is all one complete unit on the diamond 2, so it is not just the LCD underneath that needs to be replaced, but the whole screen assembly including the touchscreen layer and the actual LCD.
I hope this information helps you to make up your mind.
best regards,
Pete W
HTC
Click to expand...
Click to collapse
Reply was fast, I think <1hr from my first email!
I'll see if I can find any HTC Dealer who will send it off on my behalf, but may just end up buying this: http://cgi.ebay.co.uk/LCD-Screen-Di...UK_Mobiles_Accessories_RL?hash=item588362a12d
Hi mate,
had the same problem...
the item you psetd from ebay is not the one you need to change.
you need a digitizer, not an lcd screen.
i got one from ebay (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItemVersion&item=290376721935&view=all&tid=393718237019), it includes both the lcd and the digitizer, you can check ebay to find other auctions offering the digitizer only.
you can change the digitizer on your own if you don't mind loosing the waranty of your phone.
cheers
Hi,
I had already found this: http://cgi.ebay.co.uk/Touch-Screen-...UK_Mobiles_Accessories_RL?hash=item5882e7ef74
Will buy in a bit, funds are a bit short today.
The Touch Screen's functionality hasn't changed at all though, no sticking buttons or anything. So I suspect that its the LCD Screen thats damaged but will follow you're advise as you're going to have more experiance than me (and its the cheaper part to begin with!)
Scrap the above post.. my g/f has just told me that the dots on her phone are bigger/worse. Looks like its the LCD Screen afterall
i still believe it is not the LCD.
the digitizer is actually sitted on a glass, and the LCD is below that. it is very difficult to harm the LCD. i also though it was the LCD (at least i wasn't sure which was broken) so i ordered both of them.
if you disasseble the phone you will be sure if it is the LCD or not.
i vote for the digitizer
good luck, if you need any help, i'll be pleased to help you..
Just to update, A few days after I posted and got helpful advice on here.. she called me up to say the dots have disappeared, and they have still gone now a few days after.
She said she put it in the office where she works, under a printer paper tray, and the office was warm. Something has (maybe only temporarily) fixed it.
I´m having the same exact problem my nephew dropped my phone, i already dissemble it because i was not sure of the lcd type, but when i looked at the digitizer i didn´t see any dots, so i´m not sure what to repair, TS or Digitizer, i allready tried with the tape to pull the digitizer, when it was apart i couldn´t see anything on the lcd no marks at all, opinions please.
cheers
Well F**K me! just bought a second hand diamond 2 to replace my xperia...
...seemed to work great checking it out... went home with the phone in my pocket... and as soon as I turn it on the touch screen doesn't work
dissected the whole phone only to discover the digitizer is glued to the bezel!
I ordered this from Ebay, will update if I got it working with the brand new housing + digitizer: http://cgi.ebay.it/ws/eBayISAPI.dll?ViewItem&item=380166349182&ssPageName=STRK:MEWNX:IT
fingeres crossed
Please report back here on this thread if it works
fluke said:
I´m having the same exact problem my nephew dropped my phone, i already dissemble it because i was not sure of the lcd type, but when i looked at the digitizer i didn´t see any dots, so i´m not sure what to repair, TS or Digitizer, i allready tried with the tape to pull the digitizer, when it was apart i couldn´t see anything on the lcd no marks at all, opinions please.
cheers
Click to expand...
Click to collapse
Can any one help with this matter?
fluke said:
Can any one help with this matter?
Click to expand...
Click to collapse
If you can make some photos of the digitizer and the lcd dissasembled maybe, but It seems unlikely to break the lcd when you didn't completely trashed your digitizer.
jodeltje said:
If you can make some photos of the digitizer and the lcd dissasembled maybe, but It seems unlikely to break the lcd when you didn't completely trashed your digitizer.
Click to expand...
Click to collapse
Thanks for the reply as I said previously:
I´m having the same exact problem my nephew dropped my phone, i already dissemble it because i was not sure of the lcd type, but when i looked at the digitizer i didn´t see any dots, so i´m not sure what to repair, TS or Digitizer, i allready tried with the tape to pull the digitizer, when it was apart i couldn´t see anything on the lcd no marks at all, opinions please.
cheers
Click to expand...
Click to collapse
Also the LCD didn´t had any marks at all, but i´m going to buy the TS+LCD and replaced by parts first the lcd because it´s a lot easier to replace then if the problem persists the TS.
I will post the result later when i get the parts to replace.
Superman_1122 said:
I've had a reply from HTC UK who said the following:
Reply was fast, I think <1hr from my first email!
I'll see if I can find any HTC Dealer who will send it off on my behalf, but may just end up buying this: http://cgi.ebay.co.uk/LCD-Screen-Di...UK_Mobiles_Accessories_RL?hash=item588362a12d
Click to expand...
Click to collapse
Can anyone confirm the above link as being both Lcd and Digitizer? I'm sure it doesn't mention it in the listing but the picture looks like it's showing both connectors.
Most likely only the LCD that's my conclusion if you look at the sellers store.
But to be sure e-mail the seller and ask.
http://stores.shop.ebay.co.uk/Elect...QQ_sidZ195653022?_nkw=diamond+2&submit=Search
Soooooo, as I've already posted here, My digitizer was busted on the phone I just bought... what I didn't tell was that I ordered a digitizer, then checked if I could remove it easily...came to the conclusion that I couldn't... and ordered a digitizer+housing so I could easily fit it on.
the mail brought me the digitizer today, and while knowing a better solution was on it's way I couldn't resist and try if I could make it work.
Turns out it super easy to seperate the digitizer from the bezel using a hairdryer (softening the glue) and a knife:
Take your phone apart, just the 4 screws, click the plastic center off it. Remove the digitizer cable, the touchscreen cable and the speaker cable.
now you are able to remove the green plate which holds all chips and stuff.
underneath that is the screen, lift it up gently going under it from the gap the removal of volume buttons leaves, put it away safely.
Now remove the speaker, the buttons under the zoom bar, and the power button(don't forget the the power button, and rubbery thingy that falls out of the bottom, the hole needs to be at the bottom when putting it back in).
your phone should be completely empty by now... just the front and the digitize glued together.
make the front of the phone reaaaaaaaaaallllly hot, put the knive between the metal and the digitizer (I started at the part where the zoombar is) and gently push it between the two parts... (from the inside of the phone to the oudside). Now just keep the whole thing above the dryer to keep it warm and slowly slice your way around the phone (no secret wires are there that you can cut through).
I used some random glue I had lying around to glue the front back to the new digitizer... perfect!
so the screen is like new now
ps bought this digitizer: http://cgi.ebay.nl/Touch-Screen-Dig...wItemQQptZPDA_Accessories?hash=item45eed6effc
Thanks for that jodeltje.
It sounds exactly the same as when i replaced the digitizer on an Omnia. Really not as hard as one might imagine. Taking your time and being careful are the most important things.
Hey guys,
I came into same boat last night.
Dropped my T-Mobile MDA Compact V from 2.5ft table, Backwards (Not towards LCD) and now it has black dots on screen. I guess the LCD has pressed backwards by chip sets.
Here is a screenshot.
I think its LCD damaged but I don't have cash to replace nor device warranty.
Do you think the problem solves eventually? Coz once I had dropped sony mobile and it too had same issue but solved after many days.
Hopefully it solves.
BTW; does LCD affixed to Digitizer? by seeing service manual, it doesn't look like it is. And I afraid to get cheap hongkong LCD screens for about 30$ since they won't be true quality display. i.e blueish.
Thanks...
Best Regards
hello CRACING,
sorry about what happened to you...
from the picture i can say that you have a problem with the digitizer...
your LCD is ok.
i tend to have this problem over and over again the last 1,5 years... i replace the digitizer (or the glass on which the digitizer is attached to) every 3-4 months..
yes the ones you get from ebay are not that good quiality, but well it keeps the phone working...
if you need assistance on replacing the digitizer, i can help you, by providing pictures and istructions...
cheers

Full Housing Cover Black

Hi.. Guys i am planning to buy a full housing cover for HTC VOGUE Black (TELUS) i am having a good Touch Screen Digitizer & does not need to be replaced!
I wanted to know that if i get new housing without the touch screen digitizer then will i be able to replace the current digitizer to the new one?
bcoz i have heard that the touch screen digitizer is machine fitted & cannot be removed
plz guys reply me with the best link possible!
I am posting some links could any1 tell me which is the best 1 to buy
(1)http://cgi.ebay.com/Original-Housing-Cover-Fr-HTC-Touch-XV6900-MP6900-BLACK-/160438224870?cmd=ViewItem&pt=PDA_Accessories&hash=item255add07e6
(2)http://www.aliexpress.com/product-fm/302967567-Full-Housing-Cover-for-HTC-VOGUE-6900-P3050-XV6900-wholesalers.html
(3)http://cgi.ebay.ca/HTC-MP6900-OEM-FULL-BLACK-HOUSING-KEYPAD-TOUCH-SCREEN_W0QQitemZ390207578512QQcmdZViewItemQQptZPDA_Accessories?hash=item5ada2f2190

Can i buy a full housing for vogue without the digitizer & how to replace it?

Hi...
I am planning to buy a new HTC FULL HOUSING BLACK without the TOUCH SCREEN DIGITIZER
now i am confused whether i will be able to replace the FULL housing without changing the Digitizer??
i dont want to go for a new touch screen digitizer
Housing link from where i am buying : http://cgi.ebay.ca/FULL-BLACK-HOUSING-HTC-SPRINT-TOUCH-XV6900-MP6900-/170525852132?pt=PDA_Accessories
I am in INDIA & here HOUSING is only available for HTC ELF & not for vogue
& when i asked the HTC person he told me that the touch screen digitizer comes company fitted & the whole should be changed for ELF!
I really dont know about the VOGUE thing
So please guys help me out!!
If the housing can be replaced without changing the touch screen digitizer then can any one please give me a tutorial?
Thanks in advance!
Two good instruction write ups
http://mikechannon.net/PDF%20Manuals/HTC%20ELF_Touch%20Service%20Manual.pdf
and
http://mikechannon.net/PDF%20Manuals/OSeven%27s%20Disassembly%20Guide%20to%20the%20HTC%20Touch%20-%20Elf%20.pdf
if your still looking for one, ebay is good.
depends on what color
there is white and black
check for which ones fit with yours as the cdma and gsm ones are slightly different
and check if it comes with a digitizer or not
preferably a new one
key words: htc vogue
and then 'housing' if you can't find any

Anyone got a broken/bricked HTC Diamond?

Hey guys, I have just broken my diamond and I'm looking for a doner to repair mine.. My screen glass is cracked..
My screen works and the colours are not spreading..
My touch works and I can still use the device..
So I'm guessing there is glass between the digitizer and the actual display.
Would is be easier to repair it with parts from a doner phone or...
purchase this: http://cgi.ebay.co.uk/FULL-LCD-Scre...K_Replacement_Parts_Tools&hash=item3363b4604e
And replace the whole screen assembly. That includes the full front as you see in the eBay picture...
You're right. There's a glass between digitizer and display... But they are all glued... it's a difficult work to reassemble everything...
Yeah I thought so...
The reason I posted this was to see if anyone had an old broken bricked diamond I could useas a doner for the whole screen..
Sent using RapidRead!
I tried the same but resulted in completely disaasebling the LCD. And was of no use later. I had to buy a new one. Better get a new on instead.
Yeah, I most likely will
I just asked here to see if I could get one a little cheaper, but then paying around £20-£25 for a brand new screen etc, which includes the screen, digitizer, glass etc...
What you see in the eBay pic is what I would be removing from a doner phone.
But also if I bought a new one from ebay that would then get rid of any scratches etc.
Although I've always had a protector on it from day one, it was bought second hand so there are some minute scratches

Categories

Resources