Database Develop

My Chips Not up to par? .29 Kernel blues

Everytime I try flashing Anything with toasts custom kernel my phone just wants to up and die, If play with the phone and am patient enough I can sometimes get one boot, that eventually crashes and never comes back as I just see a solid HTC logo.
I'm also finding every-time I try booting, while looked up to the computer trying to get a logcat or at least something it appears my phone is malfunctioning to the point it only appears as an unknown device if it even shows.
I've tried Freshtoast, IC3rom and the newest Darchdroid to no avail.
I'm thinking i just got cursed with subpar chips from htc and that perhaps it doesn't even like the lower 710 mhz overclock, anyone else experiencing this?
Just frustrated, if anyone would be willing to give input or plain help it'd appreciated knowing that time is valuable, There is great work at foot here.
Edit: Just about had to shove my foot in my mouth, got a boot started right before I posted, Saddly it isn't booting reliably let it set up
logged into my google account and tried to restart the phone, same luck I've been having has decided to hard reset? "Vibrates and screen flash" 4 Times in the past 5 minutes

well I am not sure what you have and havent tried, but a few things to check first. Is your sdcard setup for apps2sd? if so did you wipe that also when you are switching roms?.
Did you wipe your data between roms?
Have you tried just a stock rom, such as http://forum.xda-developers.com/showthread.php?t=681697 . this is completely stock of the final 2.1 release. Wipe everything including your ext partion on your sdcard, if you have one.
Thats at least a starting point to see if you dont have faulty hardware. You honostly should have no problem getting that to work.

Try Zen's slide rom. I too could not boot a single overclocked rom, until I tried that one. Is overclocked, but boots up at 480, and no bfs or compcache, so I don't know what makes it work, but it does. Once in, I was able to overclock to 691 (stock is 528), and I get neocore scores of 32-33 fps consistently, linpacks at 2.9-3.1, so almost right there with those going to 767, definite improvement over stock. Anyways, try it, my favorite sense rom by far.

I'm having these issues too... I want DarchDroid....

Actually, darch's latest booted finally for me! It's a new update, go try it!
-------------------------------------
Sent via the XDA Tapatalk App

danaff37 said:
Actually, darch's latest booted finally for me! It's a new update, go try it!
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
You're right!!!!

Lol Looks like alot of people were having the similar, Ironcily after flashing to the newest recovery darch posted updating from Godspeed darchdroid booted right up for me, Haven't tried any of the other roms with the newer kernel but darch hauls serious arse

danaff37 said:
Try Zen's slide rom. I too could not boot a single overclocked rom, until I tried that one. Is overclocked, but boots up at 480, and no bfs or compcache, so I don't know what makes it work, but it does. Once in, I was able to overclock to 691 (stock is 528), and I get neocore scores of 32-33 fps consistently, linpacks at 2.9-3.1, so almost right there with those going to 767, definite improvement over stock. Anyways, try it, my favorite sense rom by far.
Click to expand...
Click to collapse
Aye Zen did a pretty sweet job on it, If I have to use sense thats the rom with the goodies I really like, more so when he managed to get rid of all the purple and pink from it.

I had the same issues. I loaded the overclock widget and set it to 480 then updated the kernel to .29. Seemed to work. I got it up to 691 before I had lock up issues. 768 is 3 seconds.

jrbooth3 said:
I had the same issues. I loaded the overclock widget and set it to 480 then updated the kernel to .29. Seemed to work. I got it up to 691 before I had lock up issues. 768 is 3 seconds.
Click to expand...
Click to collapse
That's an interesting fix. I'm going to try that, as I've had issues flashing any rom that is OC'd (trying DC 2.08.1 .29 kernel right now using your suggestion)
Edit: That still did not work for me for DC. I'm at a loss.

murdocthc said:
That's an interesting fix. I'm going to try that, as I've had issues flashing any rom that is OC'd (trying DC 2.08.1 .29 kernel right now using your suggestion)
Edit: That still did not work for me for DC. I'm at a loss.
Click to expand...
Click to collapse
Did you set it to run on boot?

A_Guy71 said:
Did you set it to run on boot?
Click to expand...
Click to collapse
I did. My phone will not boot any OC'd ROM. I've been trying for about a week now...not sure what else to try.

As of DarchDroid 2.6.5, it is no longer working on our "sub-par" phones.
If anyone needs 2.6.4 and the dl link is not up, just let me know.

And he added bfs back in, I know it doesn't make sense, but I wonder if that's what is doing it, it's one of the few similarities between darch droid and zen slide that is different in all others.
-------------------------------------
Sent via the XDA Tapatalk App

Dragon Kernel 3.2 - Voodoo Sound v4

http://www.tabbal.net/files/Dragon-Kernel-Voodoo-OC-v3.2.zip
Just to keep the OP short, description and such are here: http://forum.xda-developers.com/showthread.php?t=922510
Changes from 3.1.2:
Voodoo Sound v4.
OC the bus slightly at 1.4Ghz, still deciding if it's worth while.
Increase the refresh rate for the GPU. Increases FPS cap to 65. Turn off the screen once after boot to make sure it's working.
Convert Android logger to a module, disabled at boot. insmod /lib/modules/logger.ko to enable.
Enabled charge current readout.
Increase kernel Hz to 1000, seems to smooth things out a little more.

FIRST ! , on it
and first to downmlaod too ;P
hey quick question will voodoo colorfix will ever get added ?

bartek25 said:
FIRST ! , on it
and first to downmlaod too ;P
hey quick question will voodoo colorfix will ever get added ?
Click to expand...
Click to collapse
I haven't seen any reason to mess with it honestly, I'm quite happy with the screen colors. Maybe if there is a control type app released for it so people can configure it.

Is there a non OC version?

You can use the voltage app to limit the cpu to 1ghz.

jmercil said:
Is there a non OC version?
Click to expand...
Click to collapse
I'm trying to avoid maintaining another branch without oc.. The kernel self-limits at boot to 1Ghz, so it should act like a non-OC kernel unless you load up the Voltage Control app and enable some OC states.

What about the voodoo sharpness mod? I'm excited to try out the 1000hz. Did you ever disable the fm module? Did you ever get a rom booting with full preempt like other devices do? I haven't had a chance to mess with it myself. :-(
Sent from my SGH-T959 using XDA App

ivanmmj said:
What about the voodoo sharpness mod? I'm excited to try out the 1000hz. Did you ever disable the fm module? Did you ever get a rom booting with full preempt like other devices do? I haven't had a chance to mess with it myself. :-(
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I haven't done any of the voodoo screen stuff... Never seen a reason to. I might look at it. One of the things I would want to see is a userland control app so people can adjust to what they want, like Voodoo Sound does. The screen is just too subjective. Everyone is going to want something different.
Yes, the FM module is disabled, no significant difference. No, full preempt doesn't boot... still not sure what Samsung did there... I'm still using voluntary preempt.
From what I've seen of Samsung's code and their shortcuts, I suspect something in RFS isn't threadsafe so they broke full-preempt. That's just a guess though, as we don't have source for RFS and they will never give it to us as they think it's valuable..

Is kernel born to show our galaxy S power ?
And how is battery ??

thanharts said:
Is kernel born to show our galaxy S power ?
And how is battery ??
Click to expand...
Click to collapse
First page and the battery question is already asked..

Dude I can't overclock my phone not one bit my phone freezes up and I have to pull the battery is there a fix for this thank you
Sent from my SGH-T959 using XDA App

ttabbal said:
I haven't done any of the voodoo screen stuff... Never seen a reason to. I might look at it. One of the things I would want to see is a userland control app so people can adjust to what they want, like Voodoo Sound does. The screen is just too subjective. Everyone is going to want something different.
Yes, the FM module is disabled, no significant difference. No, full preempt doesn't boot... still not sure what Samsung did there... I'm still using voluntary preempt.
From what I've seen of Samsung's code and their shortcuts, I suspect something in RFS isn't threadsafe so they broke full-preempt. That's just a guess though, as we don't have source for RFS and they will never give it to us as they think it's valuable..
Click to expand...
Click to collapse
I like how you put it, "they think it's valuable.." lol
/efs still runs RFS so maybe that's just freaking out when we set the kernel to preempt.
As far as the screen goes, I definitively agree, but he did change more than just the color. He added a sharpness fix and several other settings. But I like the idea of it all being useland controlled.

Thegreat520 said:
Dude I can't overclock my phone not one bit my phone freezes up and I have to pull the battery is there a fix for this thank you
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Not all phones are overclockable. Have you ever been able to overclock your phone?

runs great so far at 1.2

Thanks, That what i did, actually this is the first of the OC kernels th I've bn able to get to1200mhz without the phone locking up. Thanked both of you!!

i haven't been able to successfully overclock this kernel using the voltage app.....if i use setcpu speed i can get to 1.4 ghz easily but anytime i use the voltage app i get a freeze....any suggestions??
EDIT* sorry i meant the previous kernel that the new update

I talked with Supercurio and he tells me the OneNAND driver itself is what's causing the issue with preempt. In order for us to be able to use preempt, we have to either mod the nexus s kernel to work on our phones or backport the OneNAND MTD driver. That way, we stop using the FSR layer altogether. (Wouldn't that also cause an increase in file system performance as the FSR layer causes some mayor slowdowns in fsync?

I love using your kernels as it allows me to underclock.

ivanmmj said:
Not all phones are overclockable. Have you ever been able to overclock your phone?
Click to expand...
Click to collapse
Honestly this is the first time I've tried and I can't even put it at 1.12 without it locking up on me damn just when I thought I had a awesome phone lol jk
Sent from my SGH-T959 using XDA App

I honestly love you, my phone flies, and it never crashed ever! I love the sound, and the battery life gets better and better, I just need to learn about undervolting, is there a site where it can teach me about it?
I'm doing good at 1.4 also.
-speed demon

[Q] Feature seems to be missing.

Hi, there!
Before I get started here, let me apologize if this subject has been covered before. I can't seem to get the forum keyword search function to return any results--at all- and I don't have time to read pages and pages of threads to find what I'm looking for. If there is a better place for this, please let me know.
I'm new to the Nook Color, and I'm running CM7 nightly release from 07/02/11. I love it, but I have some questions and a comment.
When the app drawer is open and you long-press an icon, it used to put a shortcut to that app on the homescreen. now it brings up this weird little submenu... What exactly does, "Choose Catalog", mean and what does it do for us? I REALLY miss that long-press to add shortcut to homescreen thing. Is there a setting that I can change to re-enable it?
Is there a specific thread to use to give feedback and ask questions about the nightlies' that is for the Nook Color only? I saw one for the nightlies, but it seemed that it was mostly irrelevent to us since all manner of devices--includung phones-- were being discussed.
I've just been using the CM7 nightly releases with Google Apps installed. Am I missing something by not installing Dalingrin's clockwork mod kernel? I was afraid that it was a replacement--not an addition-- for the CM7 nightly build. Should I install it? I'm sure I'd like to overclock my Nook to over a gigahertz, but I wouldn't like losing the stability and fumctionality of the nightly build I'm using.
Thanks in advance for any assistance y'all can offer.

Looks like the launcher is sorta corrupt. Try a different launcher that will work. Go Launcher EX (free) on the Market. Launcher Pro Plus is the best I think but it costs a little amount. Oh, but if you want to really stick with the stock launcher, go into Settings>Applications>All>ADW Launcher. And uninstall it. Then re-flash CM7 Nightly + Gapps and it should be restored.

First... on the launcher screen... use menu... more.... make sure homescreen is not locked.... Then it will do as you're used to regarding placing on launcher screen.
Actually... you don't have to unlock desktop... just wiggle finger when the menu you are talking about is up.... you will have to unlock desktop to move the item or delete it if you want.
Now I will edit this to answer more... just wanted it posted before you did anything as drastic as replacing or reinstalling your launcher...
The CM7 user thread in the Nook Color section is a great place for discussing all things NookColor CM7 related.
What the catalog does is....
You can place apps in a catalog... then when you're in app drawer then the left and right app launcher buttons turn to < >... use them to move between catalogs... ALL apps will still show everything... but in each catalog will show only the apps you add to it... so you can create a catalog called "Utils" and place all the Nook Color and CM7 utilities in it... scroll to is and ONLY those apps will show on the screen.
As for Dalingrin's OC kernel... if you're not using it and his NookTweaks... you are TRULY missing out... STRONGLY encouraged to use them.

Oh and don't OC past 1.2 GHz in NookTweaks.... it will give you SOD every hour.

Thanks for the quick response. I didn't know about the long-press-and-wiggle technique, and it worked like a champ.
Do I have to start over to install Dalingrin's mod? Does it replace this operating system entirely?

ionizd said:
Thanks for the quick response. I didn't know about the long-press-and-wiggle technique, and it worked like a champ.
Do I have to start over to install Dalingrin's mod? Does it replace this operating system entirely?
Click to expand...
Click to collapse
No you don't have to start over... just flash it after anyof the nightlies... any time after.
Always remember...
YCGIYWG
(You Can't Get... If You Won't Give)

ikingblack said:
Oh and don't OC past 1.2 GHz in NookTweaks.... it will give you SOD every hour.
Click to expand...
Click to collapse
Really? What about some people reporting being able to go up to 1.6 ghz? One of the reasons I bought the NC was in hopes that it could run 1.3 or 1.4 ghz stable.

ikingblack said:
Oh and don't OC past 1.2 GHz in NookTweaks.... it will give you SOD every hour.
Click to expand...
Click to collapse
That is a pretty dumb blanket statement especially when there is a percentage of users who have hit 1.3GHz and higher without getting a sod. I get them less then once a day. I used to get them as often when I was at 1.2GHz. So please don't misinform people
Sent from my NookColor using XDA Premium App

psychoace said:
That is a pretty dumb blanket statement especially when there is a percentage of users who have hit 1.3GHz and higher without getting a sod. I get them less then once a day. I used to get them as often when I was at 1.2GHz. So please don't misinform people
Sent from my NookColor using XDA Premium App
Click to expand...
Click to collapse
Well, when I went any higher than 1.2 GHz, I got sod every other hour. When I clocked up to 1600 Mhz, the thing got SOD like every 5 minutes.
EDIT: @PoisonWolf, do you know how to get up to 1.6 GHz no SOD? I would love to be faster than the Flyer... which is double the price.

C'mon, people. We provide feedback based on our own experiences and it's not always 100% true but still, no need to use harsh words to correct the mis-info. Be nice and together we can build a strong community.
Anyway, even though I'm using Dalingrin OC 063001 version and nookcolortweak installed, I cannot ever seen any option to overclock greater 1200MHz, how do you guy get up to 1.3GHz, left alone 1.6GHz? What kernel do you use?

ikingblack said:
Well, when I went any higher than 1.2 GHz, I got sod every other hour. When I clocked up to 1600 Mhz, the thing got SOD like every 5 minutes.
EDIT: @PoisonWolf, do you know how to get up to 1.6 GHz no SOD? I would love to be faster than the Flyer... which is double the price.
Click to expand...
Click to collapse
Well, to be able to get up to 1.6ghz, that is really the luck of the draw. I would gather that the manufacturing process is not perfect and not all chips can achieve such speeds. If anything, I would imagine there to be a range on the "limits" of these chips.
I found out that mine was 1350 mhz. No matter what I did, anything higher than that resulted in clunky responses, choking, skipping, etc.
I was hoping I'd get something in the 1.5 ghz range, but ah well.
Thus, I now run it at 1.3 ghz ondemand!
Just tinker around with the combinations / voltages / governors to see what your true limitation is. While you are doing this, do NOT set anything ON BOOT.

votinh said:
C'mon, people. We provide feedback based on our own experiences and it's not always 100% true but still, no need to use harsh words to correct the mis-info. Be nice and together we can build a strong community.
Anyway, even though I'm using Dalingrin OC 063001 version and nookcolortweak installed, I cannot ever seen any option to overclock greater 1200MHz, how do you guy get up to 1.3GHz, left alone 1.6GHz? What kernel do you use?
Click to expand...
Click to collapse
Same Kernel with U.
Most Nooks go around 1.200-1.300mhz.Some few lucky can go a bit more.

Got it,
Thanks Ras

[Q] Best V6 SuperCharger settings for our HTC Hero?

I saw people mentioning the V6 supercharger script, and went and found and installed it. However I wasn't sure what setting to use (when it asks for a number between 1-17). Cloud I get some advice from others on that?
Here's the supercharger thread for those interested: http://forum.xda-developers.com/showthread.php?t=991276

I'm pretty sure the choice you want is 6 at least that's what I did. Not sure where I saw that, but I think is was from the gingerbread man
xD I can't remember his user name
Sent from my HERO200 using XDA App.

Haha, that just so happens to be the one I picked.

D3FAULT said:
I saw people mentioning the V6 supercharger script, [/url]
Click to expand...
Click to collapse
Vortech or Pro Charger.. LoL

Houndog101 said:
Vortech or Pro Charger.. LoL
Click to expand...
Click to collapse
Pfft, erase the "or" in Vortech and just get a Honda vtec haha
Sent from my HERO200 using XDA App

D3FAULT said:
Haha, that just so happens to be the one I picked.
Click to expand...
Click to collapse
6 is what I use with the kernel and 3g tweaks as well and it has made a huge difference. I know others are using that as well on the Hero. I like my performance with no compcahe and jit on. Every phone is different though. I'm doing the animations on fast in spare parts. I am finally using all animations too, not just the window.
Sent from my HERO JBGB

Yeah it definitely improved my phone's performance. I'm going to try disabling compcache and disabling jit (since it was on by default) and see what happens. Maybe further performance increases will ensue.

D3FAULT said:
Yeah it definitely improved my phone's performance. I'm going to try disabling compcache and disabling jit (since it was on by default) and see what happens. Maybe further performance increases will ensue.
Click to expand...
Click to collapse
I have gotten good response from my phone with jit on. I will have to test more with jit off to compare. I did with compcache and found more lagginess on my device, but others have probably have no issue- same with jit as well. I also have asset purging disabled FWIW.
Good luck!

where exactly can i see those settings youre talking about? i know the cm7 rom has it, but im running a sense rom....

m_reyna_16 said:
where exactly can i see those settings youre talking about? i know the cm7 rom has it, but im running a sense rom....
Click to expand...
Click to collapse
Those are tweaks that cyanogenmod adds to their roms. You aren't seeing them on sense because they aren't there.

Freeroot said:
Those are tweaks that cyanogenmod adds to their roms. You aren't seeing them on sense because they aren't there.
Click to expand...
Click to collapse
can i edit them in adb?

Uhhhh no......

MattCrystal said:
Uhhhh no......
Click to expand...
Click to collapse
thanks, just wondering... im new to adb...

Im running v6 update 9 beta 1 and no io tweak. I got the 98 no io just fine when it comes to the v6 i do the run as root and pick 1 for fast scrolling and nothing happens. I just tap menu and leave in background. What the heck am i doing wrong? Or do i tap kill?

I'm not really sure that the 3g tweaks are working. I've tried all the options on the latest release, but nothing seems to change when I run a speedtest. I'm generally around 1k down/600 up. Any ideas on this? I don't know if I need to running run on boot as well or not. . .

stupidjerkheadface said:
I'm not really sure that the 3g tweaks are working. I've tried all the options on the latest release, but nothing seems to change when I run a speedtest. I'm generally around 1k down/600 up. Any ideas on this? I don't know if I need to running run on boot as well or not. . .
Click to expand...
Click to collapse
Same here. I tried all, even the two "experimental" options and my speed test results are basically identical to what I had before applying any updates.

for the experimental it says "it may or may not make things snappier or do nothing at all" and as too the 3g tweak, did u reboot after installation? you can check your buildprop to see if settings were changed

Yup...did a reboot each time. Would it matter the order in which the other "tweaks" were implemented? I did the 3g, then the v6 supercharger, then the kernal tweak.
But, I'm seeing no benefit at all from the 3g.
Running gb hero deck 1.21 with. 29 kernal and firerat mod as well.
Sent from my HERO200 using XDA App

I ran some tests on my 3g speeds and the results were pretty inconclusive. I guess I should have included a test with the 3g tweaks turned off too. Anyway, it was a pretty limited test, but it seems like there isn't much of a difference with any of the 5 settings. I'm not unhappy with the 3g speeds. I just was hoping to get more of a bump with the tweaks.
I ran 10 tests each, using speakeasy.net on my laptop, while tethering to my phone's 3g. I went that route b/c I've read that the speed test app is pretty buggy for GB ROMs. In my experience that is very true b/c my readings are all over the place with that thing.
Turns out the "Fastest" was indeed fastest. But, not by much. Here are my average readings over 10 iterations:
Fastest - 1304 kbps / 464 kbps
Faster - 1299 kbps / 464 kbps
Exp. 2 - 1259 kbps / 339 kbps
Exp. 1 - 1132 kbps / 438 kbps
Fast - 1147 kbps / 390 kbps
The fastest single DL test was on the Experimental 2 and was 2510 kbps (2.51 M)...however, the slowest DL test was also on Exp. 2 (530 kbps). So, that one was all over the place. I guess i just have to accept that the hero isn't gonna be getting 2-3M download speeds with regularity on Sprint's 3g. For now, i'm too stubborn to upgrade, but we'll see how that goes.
As far as the v6 tweaks, i never really had a complaint with this phone since getting rid of that laggy-as-hell stock ROM. CM7, GB deck, and aospCMod have all been really snappy for me...especially when in conjunction with Launcher Pro. I think i'm on the latest radio (2.42.02.10.29). However, i'm not on the latest PRL. I don't know how to change that w/o reverting back to sense. I'm at 60677, currently. Would that make a difference with 3g? I thought that only pertained to the voice signal and roaming...

Im trying to do this too i see there are different updates and versions. Also when i press enter where the heck is the enter button on our hero? Why is it for txt it has a go button and for other things its a back button. Im running standard GB keyboard. I dont know how to finish the V6 if i dont know where to enter.

Serious Lag on TeamLava Games

Has anyone experienced this?
Although at first when I downloaded Bakery Story it seemed to have a lag like a wounded turtle crawls which made me doubt that my device is starting to suck but after when I downloaded Restaurant Story I had the same thing in front of me which made it certain that my Raider 4G is innocent. I have read a thread on the storm8 forum but there nothing or no one seems to be willing to resolve what's occuring. These are interesting games but wonder what is causing them to lag.

Zeekayy said:
Has anyone experienced this?
Although at first when I downloaded Bakery Story it seemed to have a lag like a wounded turtle crawls which made me doubt that my device is starting to suck but after when I downloaded Restaurant Story I had the same thing in front of me which made it certain that my Raider 4G is innocent. I have read a thread on the storm8 forum but there nothing or no one seems to be willing to resolve what's occuring. These are interesting games but wonder what is causing them to lag.
Click to expand...
Click to collapse
What rom are you currently running

rignfool said:
What rom are you currently running
Click to expand...
Click to collapse
No rom, completely stock.

I'd blame poor memory management in ICS...
You can try raising your minfrees...
Any of the kernel tuning apps will let you...
If not that... Then its the 1.2ghz CPU clock speed...
I don't see why you wouldn't be running PAC or are you holding out for the return of cm?

rignfool said:
I'd blame poor memory management in ICS...
You can try raising your minfrees...
Any of the kernel tuning apps will let you...
If not that... Then its the 1.2ghz CPU clock speed...
I don't see why you wouldn't be running PAC or are you holding out for the return of cm?
Click to expand...
Click to collapse
My laptop's motherboard fired up a couple of months back and I haven't been able to get that replaced since, I don't have any other system in spare that I can use so I can't flash anything at the moment.
I've read in a thread that these games are not optimized for dual core processor phones yet, no word from TeamLava. Convinced me to believe that?
And from 'raising minfrees', what exactly do you mean?

Zeekayy said:
My laptop's motherboard fired up a couple of months back and I haven't been able to get that replaced since, I don't have any other system in spare that I can use so I can't flash anything at the moment.
I've read in a thread that these games are not optimized for dual core processor phones yet, no word from TeamLava. Convinced me to believe that?
And from 'raising minfrees', what exactly do you mean?
Click to expand...
Click to collapse
It would affect androids low memory killer...
Get kernel tuner...
Look for either minfree or OOM on the main screen..
Choose either aggressive or very aggressive...
Try your game...
Hopefully your rooted... Or else this prolly won't work

rignfool said:
It would affect androids low memory killer...
Get kernel tuner...
Look for either minfree or OOM on the main screen..
Choose either aggressive or very aggressive...
Try your game...
Hopefully your rooted... Or else this prolly won't work
Click to expand...
Click to collapse
Yup, there's an issue with their games.
Tried setting the OOM to very aggresive, same thing.
Edit: Playing it on my sister's Acer Iconia B1-A71 with stock Jellybean (4.1.2) and it works like a charm!
So it seams there's something seriously wrong with the stock ICS with HTC Sense, it really sucks because the Iconia also has a dual core processor and this game works great on it.
Although on my Raider, while the game is on, I press the back button of the capacitive phone buttons and the screen displays a dialogue saying 'Are you sure you want to quit this game?', and while I look back in the game, everything runs silky smooth. This is strange.
@rignfool
Does this mean I need a new rom?