Hi. One day my Kayser completely freezed and i soft reseted it. When it turned on it won´t pass the bootloader screen. So i installed a new rom and it was runing again. But i have 2 problemas now. The headset only works if i soft reset (and vice-versa, for the speakers) and i can´t connect it to the PC.
When was installing the new ROM i remeber that i installed some USB drivers so i can get it runing.
If somebody can help i apreciate.
PS: I also tried a lot of roms and radios, but the problem remains.
Thank you and sorry for the (very) bad english
Related
Hey guys,
I have a ATT tilt and installed the duut touchflo apps. I then clicke on the HTC music pp in programs and now my phone is continually rebooting. it get to the green screen and re-boots.
HELP
never mind guys -- I was finally able to get the hard reset to work
Hey,
I have the same problem with a french Orange model I just received today... keep rebooting.
hard reset doesn't seem to work and I can't boot even to install hard SPL and flash another rom to try.
Could mtty help me or something ?
Thanks,
Cedric
I tried flashing WM6 on my QTEK 2020, but I had the wrong version. I begun the upgrade having it on bootloader and after a while an error about updating radio occured. Now, my PPC powers up, but it gets stuck on the beginning with the "QTEK" logo with the clouds and the blue led that indicates the bluetooth is activated. Neither soft nor hard reset does anything and I can't flash the original rom through bootloader (I can boot the PPC in bootloader).
Does anyone have any idea please?
If you posted this in the Qtek2020 (Himalaya) forum, you might get a quicker response.
Thread moved out of the BA section
Maybe you should try reflashing. Just flashing a new ROM and then just a radio might do the trick.
How did you flash? With the No_ID?
And what were you trying to flash? A BA ROM while you have a HIMA?
OK!
It's ok now! I flashed the WM6 Rom having my PPC on bootloader and everything's fine!
Its very good to hear that..btw which rom did u flash before and what have u flashed now
I really can't remember what the previous rom was, but it was for another brand! It was stupid to flash that one! The one I have now is this:
http://forum.xda-developers.com/showthread.php?t=332945
But I have a problem. The PPC restarts randomly even if I do nothing with it. I haven't overclocked it.
It is not got sign, if your PPC restarts randomly. Better you flash it again.
I flashed again the ROM from "Himalaya Mobile 6" category and the following link:
http://forum.xda-developers.com/showthread.php?t=332945
but my PPC keep restarting and one more thing, WM6 kills my battery! I've got to charge it every day, before I charged it every 3-4 days. Does anyone have any idea what I should do? Can I put WM2003 now?
Hmmm... I'm using the 7c ROM from that page with no problems at all.
Did have some issues with some older apps and the config for TomTom when I switched to WM6, but not anymore.
What do you have installed, and what versions?
I have installed nothing but WM6!
Hello guys, let's make it short... suddenly the display of my Diamond become black and there's nothing I can do to make it on again... I tried everything: reset, remove battery... nothing! :-(
The telephone works, in fact I can receive calls and so... and it even connects through activesync. So it's a display problem for sure! :-((
Now my BIG question: I have to put it back H3G ITA original ROM (first step), that I've found on an italian forum and the original SPL that I've found here (second step), to bring the Diamond to repair.
For the ROM no probs I suppose... I'll go thru Activesync and flash it as usual, but THEN??? I won't be able to use activesync again to flash the spl, since I won't be able to set the initial configuration! :-(
Can you help me? Some ideas??? Thanks in advance!
mmm... what if someone tells me the right steps after a flash upgrade and i try to touch the screen at my best for the initial configuration???
then i could connect to activesync again maybe....
pleaaaaaaaaaaaaaaaseeeee...... give me some ideas!!! :-(((
What a shame...
i was hoping someone has an nice answer
i have exactly the same problem since yesterday - so dont worry you are not alone
you dont need to use activesync to flash
enter bootloader mode and you can connect via USB
Hey everyone,
I'm trying to install the latest HSPL-Version on a mates Diamond but without success. I flashed several mobiles bevore, but never had that issue:
Trying to install the Bootloader via ActiveSync just let's the phone fade to black and stuck until reset (instead of rebooting and starting bootloader).
Entering the bootloader manually will make it stuck, too, until USB is removed. Than the phone waits for a "serial" connection and will not response to an instered USB cable.
Is there anything I can try? If necessary, i will add phone's Bootloader / ROM version, just don't have them availible right now.
It is an original HTC Diamond (no Varia / other branded phone) and seems to have the first stable HTC ROM.
Hoping for your help...
Tris
Solved the issue:
Needed a 64bit driver for windows
Hy. I houp someone can help me to solve the problem. Yesterday bought a second hand HTC Touch Diamond CDMA (unlocked from ORANGE), and HTC was in russian language. So i wanted to flash it, because i dont know russian language. Tried to flash ROM, used MightyGroovy rom from here, everything was fine after flashing, but phone didnt boot up, just showing Touch Diamond on screen and thats it. Tried soft and hard reset but nothing happened. I cant connect HTC to computer to flash it again > getting error 260
Is it posible to instal android on my phone, while its in this sh*** condition? Or it has to be synced with windows mobile device center to instal android?
Sorry for my english, i know its terible.
connect it to the computer with USB, try installing a new rom on it. worked for me.
hantreser said:
Hy. I houp someone can help me to solve the problem. Yesterday bought a second hand HTC Touch Diamond CDMA (unlocked from ORANGE), and HTC was in russian language. So i wanted to flash it, because i dont know russian language. Tried to flash ROM, used MightyGroovy rom from here, everything was fine after flashing, but phone didnt boot up, just showing Touch Diamond on screen and thats it. Tried soft and hard reset but nothing happened. I cant connect HTC to computer to flash it again > getting error 260
Is it posible to instal android on my phone, while its in this sh*** condition? Or it has to be synced with windows mobile device center to instal android?
Sorry for my english, i know its terible.
Click to expand...
Click to collapse
should you try to hard reset the device, then make sure your device go to the bootloader to the Flash again
Thanks, hard reset and bootloader worked for me, but i dont get this > diference between CDMA touch diamond and casual touch diamond, because i have CDMA version, but rom that i flashed was for casual touch diamond, and as i understand you can brick Diamond CDMA flashing with rom for casual Diamond rom.