Hi.
Any ideas on how to get the "hold to boot" function back after unlocking a Nexus One?
It's really annoying, that the phone boots by just touching the power button.
If I'm not sure, my phone is off, the only way to check it is by pressing the power button once to get the screen to go on. But if it's off, it starts booting.
Thread moved in Nexus One Q&A.
I know it's not what you've asked for, but one way around it would be to use CPUStatusLED. That way if the LED is not ON, you know the phone is OFF
Um... even stock there's no "hold to boot" function. Simply tapping the power button will turn it on.
uansari1 said:
Um... even stock there's no "hold to boot" function. Simply tapping the power button will turn it on.
Click to expand...
Click to collapse
Actually, you're wrong. A stock, non-rooted, "locked" one requires you to hold the power button for a while to boot. It's when you unlock the phone with fastboot "oem unlock" when it changes.
Karolis said:
I know it's not what you've asked for, but one way around it would be to use CPUStatusLED. That way if the LED is not ON, you know the phone is OFF
Click to expand...
Click to collapse
Does it eat up battery too much?
Dunno about yours but when it was stock, mine just turned on pushing the power button
A workaround could be, enabling your phone to wake using the trackball. You could check that way
Lahdekorpi said:
Actually, you're wrong. A stock, non-rooted, "locked" one requires you to hold the power button for a while to boot. It's when you unlock the phone with fastboot "oem unlock" when it changes.
Does it eat up battery too much?
Click to expand...
Click to collapse
This was how YOURS behaved, or you know this for a fact? I know my N1 starts up with just a press.
I rarely turn it off, however....
KAwAtA said:
Dunno about yours but when it was stock, mine just turned on pushing the power button
A workaround could be, enabling your phone to wake using the trackball. You could check that way
Click to expand...
Click to collapse
The reason I always press the power button, is because I got used to confirm the phone was off, prior rooting. I bought a non carrier one, maybe the carrier versions are different.
I tried the trackball method, but I keep pressing it accidentally on my pocket.
I'm tring the CPU LED one now.
But I would actually prefer one, that just blinks a blue light every few seconds.
Has anyone created one to do that?
Oh, and thanks for the suggestions.
khaytsus said:
This was how YOURS behaved, or you know this for a fact? I know my N1 starts up with just a press.
I rarely turn it off, however....
Click to expand...
Click to collapse
Well, mine did. As well as my old ADP1 did prior rooting.
Mine never worked like that when it was stock and locked. One single, fast press and it booted.
CPU statusled is probably a good solution, or just trackball wake.
Well mine was unlocked as soon as i removed it from the charger, but i dont remember longpressing. Anw, i will have to agree with trackball wake
N1
Related
Here's a silly question,
How do I tell if the N1 is off? Without turning it on?
There have been several times where I've turned it off for the night (force of habit), and later couldn't remember whether or not I had in fact turned it off...
Of course hitting the power button only turns it on if it was in fact off... meaning that I have to wait a whole boot cycle before shutting it down again.
Am I missing something here?
v.
overbarg said:
Here's a silly question,
...
Am I missing something here?
Click to expand...
Click to collapse
YES the correct forum.. Nexus One Q&A
For all your questions about the Google Nexus One
... but in answer to your Q, perhaps a momentary press of the power button when it is OFF will not turn it on. There fore it is OFF?
logger said:
... but in answer to your Q, perhaps a momentary press of the power button when it is OFF will not turn it on. There fore it is OFF?
Click to expand...
Click to collapse
Even a short press turns mine on too
Use the trackball to wake mod. Then you can just hit the trackball, if nothing, the phone is off .
Hit the volume keys...
dang, absolutely correct. moved to other forum.
mrbkkt1 said:
Hit the volume keys...
Click to expand...
Click to collapse
Doesn't work for me if the screen is off.
Hit the volume keys...
Click to expand...
Click to collapse
That doesn't work.. never has....
plug into usb. if its on, screen will turn on
is there any possible way to be able to touch the screen and return its from the timed out backlight insted of the power button then the actual unlocking....
Not sure about touching screen, but there's an app called NoLock that will make it so there's no lockscreen and hitting the power button unlocks it. Eats battery though.
steadilyshine said:
is there any possible way to be able to touch the screen and return its from the timed out backlight insted of the power button then the actual unlocking....
Click to expand...
Click to collapse
Is there any way? Probably. Is it a good idea? Probably not. Just having the screen up to your thigh in your pocket would be enough to turn the screen on and thus drain your battery.
Not just drain your battery, but imagine calling people unexpectedly, random texting, somehow enabling options and selecting factory reset . There's a reason why there's a lock/unlock button.
Being a lefty, I wish you could turn the screen on using the volume buttons instead.
ThisWasATriumph said:
Being a lefty, I wish you could turn the screen on using the volume buttons instead.
Click to expand...
Click to collapse
I can. Hold them for a second and the screen should turn on when you release them. If it doesn't let me know I'd like to investigate further.
Guardian_Bob said:
I can. Hold them for a second and the screen should turn on when you release them. If it doesn't let me know I'd like to investigate further.
Click to expand...
Click to collapse
Nope, not working. It turns it on using NoLock but then that just changes the volume too.
Im running Darkys 7 btw.
Guardian_Bob said:
I can. Hold them for a second and the screen should turn on when you release them. If it doesn't let me know I'd like to investigate further.
Click to expand...
Click to collapse
Holding the volume button does not turn on the screen, you probably touched the power button with you middle finger which holding the volume button with your thumb.
Widget Locker
Try the app WidgetLocker--it's a couple bucks but lets you turn on the screen with the volume buttons if you want (any hardware button). It will also let you customize your lockscreen with widgets and unlock the screen using the soft keys at the bottom if you so desire.
Mentioned this app in previous threads, should really start getting a cut from the developer.
saint168 said:
Holding the volume button does not turn on the screen, you probably touched the power button with you middle finger which holding the volume button with your thumb.
Click to expand...
Click to collapse
You really should believe people when they say something works. Just because your rom works one way doesn't mean anything about everyone else.
Now if someone would give me a link to the roms which don't unlock due to the volume buttons, I might be able to fix that.
lmao love the music
Guardian_Bob said:
You really should believe people when they say something works. Just because your rom works one way doesn't mean anything about everyone else.
Now if someone would give me a link to the roms which don't unlock due to the volume buttons, I might be able to fix that.
Click to expand...
Click to collapse
I am not using a custom ROM. Maybe some custom ROM has that feature added but it definitely does not work on stock AT&T ROM.
Works on stock 2.2 Froyo leak ROM
avs420 said:
Works on stock 2.2 Froyo leak ROM
Click to expand...
Click to collapse
That's not a stock ROM by any means.
I wish the volume buttons were lower on the case. I have a tendency to squeeze them with my finger when pressing the power button one-handed.
So recently, my Nexus One's LCD cracked while playing cricket.. BOHOO! So I took it to the repair shop, and he fixed my LCD. YAYY! But the repair guy messed up my power on button. Before it used to be so soft and easy to turn on, but now it only turns on if i press it on a certain spot, which is very ANNOYING! I took it back to him and he didn't really fix anything. I just want to ask you if you know any easy solution to this. No, not the trackball wake. Like would it be easy for me to open my phone up and repair the button myself? Or do you think i'm out of luck?
Thank you
Psychokilz said:
Like would it be easy for me to open my phone up and repair the button myself? Or do you think i'm out of luck?
Thank you
Click to expand...
Click to collapse
Do it yourself!
http://www.youtube.com/watch?v=k74D4dGGf4U
well, sadly; my power button has given up finally.
Can anyone help me out by telling me how i'm supposed to turn my phone off completely. I'm using an app which allows me to turn my screen off and lock the phone, but is there one to provide me options for powering off and booting into recovery, bootloader etc? It's essential because i need to be able to turn my phone off to switch my battery packs, and to install new firmwares. Thanks.
Most importantly, how would i turn on my phone when it's completely turned off, since the power button wouldn't do any good
Try "Quick Boot" to switch 4-ways reboot function.
To turn on your N1, simply connect it to charger, whether it is wall, usb, or powerbank one. When the led lights up, pull your battery. As soon as the led down, insert your battery immediately.
My N1 has been "happily" running that way for months.
Sent from my Nexus One
My power button is on the fritz now too. Is there someone who fixes this? Can I make a insurance claim?
I have a Galaxy S i896 (Rogers captivate model), been running CM9 on it for quite some time now and I never had a problem with it.
Until recently, my lock button stopped working. Thankfully, CM9 allows me to use the volume buttons to turn on the screen, and I can lock the device from the notification bar. However, I sometimes get that screen that pops up when you long press the power button (airplane mode, screen shot, reboot etc...) but I don't know how. Also, whenever I remove and re-insert my battery, the phone turns on by itself! So it would seem that the button is stuck somehow, and once the phone is turned on, it is being ignored.
I read somewhere that this is sometimes caused by rooting the phone, however I wasn't completely sure about how true this information was, and therefore my question is: does anybody know what causes this, and how can I fix it!
Thanks!
mmmboulos said:
I have a Galaxy S i896 (Rogers captivate model), been running CM9 on it for quite some time now and I never had a problem with it.
Until recently, my lock button stopped working. Thankfully, CM9 allows me to use the volume buttons to turn on the screen, and I can lock the device from the notification bar. However, I sometimes get that screen that pops up when you long press the power button (airplane mode, screen shot, reboot etc...) but I don't know how. Also, whenever I remove and re-insert my battery, the phone turns on by itself! So it would seem that the button is stuck somehow, and once the phone is turned on, it is being ignored.
I read somewhere that this is sometimes caused by rooting the phone, however I wasn't completely sure about how true this information was, and therefore my question is: does anybody know what causes this, and how can I fix it!
Thanks!
Click to expand...
Click to collapse
I also have this problem with a stock ROM. The power button doesn't work and i cant even flash another ROM in recovery because of that. It only turns on when putting the charger on or replacing the battery (turns on by itself).
It seems that your power button is busted. I had the same problem, though I manage to have a way to make things alright. If youre on a CM9/C10 youre good. Download button remapper at remap the capacitive search button and make it act as a power button. So, if you're waking up the phone you will use the volume rockers and if you want to sleep and lock, use the search soft key.
takeoutttt said:
It seems that your power button is busted. I had the same problem, though I manage to have a way to make things alright. If youre on a CM9/C10 youre good. Download button remapper at remap the capacitive search button and make it act as a power button. So, if you're waking up the phone you will use the volume rockers and if you want to sleep and lock, use the search soft key.
Click to expand...
Click to collapse
Where do you get button mapper?
Sent from my SPH-D710 using xda app-developers app
DaMan90 said:
Where do you get button mapper?
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
You can search in this forum, use the search button above. I got mine by downloading in BlackMart app.
So I have been trying to overcome the issue of power + vol up (held for 10, 15 seconds\ and more) not working on my device. No matter how long I hold the two it just won't reset the device.
At first I figured it could be kernel as that is the lowest code that I've knowingly changed.
Changing to back to stock kernel did not fix it.
I thought it could be any sort of thing so I redownloaded the NL 434 firmware and then also universal generic 434 firmware and flashed back to completely stock with flash tool, doing all wipes and excluding nothing.
Neither of those firmwares fixed the issue, the hard reset function still won't work on my device.
Additional info:
Both buttons function fine individually and can see no obvious reason to suspect it's a hardware fault (though see that it is feasible, just less likely).
I can confirm that it was working initially.
I have an unlocked boot loader.
The last time I can remember it functioning was prior to boot loader unlocking - the first thing I flashed after unlock was cm10.1 and I got stuck in sideload mode with no hard reset to get me out lol
Otherwise the device is fully functional. For the time being I am back on KA07 xperia revolution rom, with advanced stock kernel (cwm) from DooMLoRD.
If anyone has any suggestions or insight it would be greatly appreciated if you'd drop a comment :good:
EDIT:
I've restored back to 350 with EMMA, but to no avail . It did however tell me that my boot version is : 1264-2309 S1_Boot_Lagan_1.0_2
Is there anyway to change the bootloader :S
After getting home I tried re-locking the bootloader which didn't work.
really starting to wonder if I should be taking it back in as hardware fault.. wonder how that will go since I unlocked the BL
If anyone would be so kind as to do a quick test for me, would you please be able to go into service mode (open dialer type *#*#7378423#*#*) then go into service tests and select the buttons and switches one (I think that's what it's called )
When you hold down the volume up or down button, is it registering as 1 press, or several, continuous presses?
Cheers
DreadPirateDan said:
If anyone would be so kind as to do a quick test for me, would you please be able to go into service mode (open dialer type *#*#7378423#*#*) then go into service tests and select the buttons and switches one (I think that's what it's called )
When you hold down the volume up or down button, is it registering as 1 press, or several, continuous presses?
Cheers
Click to expand...
Click to collapse
Not entirely sure what you are asking, keyboard and switch, volume up only shows as volume up and volume down as just volume down, regardless if you hold it down or press it over and over again, or if you just press it once. Not sure if I am an idiot, but I couldn't work out how to test the keyboard from there.Although one interesting part is that is states it is not a test for the softkeys, but tests them fine
danw_oz said:
Not entirely sure what you are asking, keyboard and switch, volume up only shows as volume up, regardless if you hold it down or press it over and over again, or if you just press it once. Not sure if I am an idiot, but I couldn't work out how to test the keyboard from there.Although one interesting part is that is states it is not a test for the softkeys, but tests them fine
Click to expand...
Click to collapse
Yeah that was the menu I meant.. couldn't remember lol. Ok so when I would hold down volume up it plays a repetitive tone and the text on screen states "vol up", then "vol up vol up" for the longer I hold it (and the beep/sound keeps replaying... confusing sounding I know
When you hold the volume up botton down, does it just beep once and display vol up (exactly like if you were to press it once and release)?
Basically if I were to press it once, the phone would make a sound and the screen would display "vol up"
If I hold it down however it will register as a new press and the "vol up vol up" texts keeps refreshing as-though it was a new key press.
Also thank you very much for checking it out :victory:
DreadPirateDan said:
Yeah that was the menu I meant.. couldn't remember lol. Ok so when I would hold down volume up it plays a repetitive tone and the text on screen states "vol up", then "vol up vol up" for the longer I hold it (and the beep/sound keeps replaying... confusing sounding I know
When you hold the volume up botton down, does it just beep once and display vol up (exactly like if you were to press it once and release)?
Basically if I were to press it once, the phone would make a sound and the screen would display "vol up"
If I hold it down however it will register as a new press and the "vol up vol up" texts keeps refreshing as-though it was a new key press.
Also thank you very much for checking it out :victory:
Click to expand...
Click to collapse
Yep exactly as you say here.
Volume up once shows just volume up beeps once, twice shows volume up twice and beeps twice . Holding it down beeps over and over again and shows volume up twice.
Pressing volume down once from here (volume up volume up) shows volume up volume down, press volume down once more now shows volume down twice.
Hope this helps
danw_oz said:
Yep exactly as you say here.
Volume up once shows just volume up beeps once, twice shows volume up twice and beeps twice . Holding it down beeps over and over again and shows volume up twice.
Pressing volume down once from here (volume up volume up) shows volume up volume down, press volume down once more now shows volume down twice.
Hope this helps
Click to expand...
Click to collapse
Yeah it helps that I can probably assume that my buttons work fine.. I was thinking maybe they weren't registering as long pressed or something but apparently not this is really frustrating. Especially when an app freezes and I just have to sit there indefinitely till it comes back online or the battery goes flat
And I have no idea if it's something I did or something with the phone.
All I know for sure is that brand new it did work as I hard reset a couple times. Then I unlocked the bootloader and have no memory of it working since then... It makes no sense to me why completely returning to stock and relocking the bootloader has no effect though.
DreadPirateDan said:
Yeah it helps that I can probably assume that my buttons work fine.. I was thinking maybe they weren't registering as long pressed or something but apparently not this is really frustrating. Especially when an app freezes and I just have to sit there indefinitely till it comes back online or the battery goes flat
And I have no idea if it's something I did or something with the phone.
All I know for sure is that brand new it did work as I hard reset a couple times. Then I unlocked the bootloader and have no memory of it working since then... It makes no sense to me why completely returning to stock and relocking the bootloader has no effect though.
Click to expand...
Click to collapse
Yeah, I could imagine. You will have to find a cool fast battery draining game to help you along .
Not sure that it would be related to you unlocking the boot loader, otherwise I am sure quite a few would have mentioned that before now.
Do you even get the first vibrate confirmation? Have you tested the vibrate from the same service test menu?
danw_oz said:
Yeah, I could imagine. You will have to find a cool fast battery draining game to help you along .
Not sure that it would be related to you unlocking the boot loader, otherwise I am sure quite a few would have mentioned that before now.
Do you even get the first vibrate confirmation? Have you tested the vibrate from the same service test menu?
Click to expand...
Click to collapse
That what I'm thinking - can I seriously be the only one having this problem. And why the hell does everything else work perfectly fine lol.
And no I don't get any sort of response (vibration or anything). Normally it just results in the volume turns up then the screen locks or display just times out but even after a minute of holding pwr + vol up nothing happens and the phone is simply in sleep mode. Otherwise vibration works fine.. currently I'm restoring the backup I made of the out of the box stock rom.. that's pretty much the absolute last thing I can think of that might do anything. Trouble is I don't remember if I made the backup before or after unlocking the bootloader.. can't remember if I flashed a custom kernel to get CWM or installed it otherwise...
DreadPirateDan said:
That what I'm thinking - can I seriously be the only one having this problem. And why the hell does everything else work perfectly fine lol.
And no I don't get any sort of response (vibration or anything). Normally it just results in the volume turns up then the screen locks or display just times out but even after a minute of holding pwr + vol up nothing happens and the phone is simply in sleep mode. Otherwise vibration works fine.. currently I'm restoring the backup I made of the out of the box stock rom.. that's pretty much the absolute last thing I can think of that might do anything. Trouble is I don't remember if I made the backup before or after unlocking the bootloader.. can't remember if I flashed a custom kernel to get CWM or installed it otherwise...
Click to expand...
Click to collapse
I would recommend re unlocking the bootloader, the problem is a kernel level driver or hardware but it is definitely around that level.
Did you have any problems, or errors when you first unlocked the bootloader? Maybe Doomlord could give you some of his incredible knowledge on the subject
Sorry but are you trying to reboot the phone from a frozen state?
Sent from my C6603 using xda premium
Maddhouse said:
Sorry but are you trying to reboot the phone from a frozen state?
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
No the phone is 100% operational outside of the hard reset not working. It is just when I get stuck in a app that freezes or when CWM recovery tricks out and freezes I have to leave the phone for ages till either it a)unfreezes after an hour or so somehow, or b) the battery dies and it shuts off after a couple or more hours.
When your phone is out of action every second day simply cause you can't turn it off it gets pretty annoying haha. If it had a removeable battery I could easily live with it and just rip the batt out no dice.
Power + volume up + down all together
Sent from my C6603 using xda premium
Maddhouse said:
Power + volume up + down all together
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
He has tried that if you read the OP
danw_oz said:
He has tried that if you read the OP
Click to expand...
Click to collapse
I thought i couldnt see it, what post number is it?
Maddhouse said:
I thought i couldnt see it, what post number is it?
Click to expand...
Click to collapse
The very first
danw_oz said:
The very first
Click to expand...
Click to collapse
So I have been trying to overcome the issue of power + vol up (held for 10, 15 seconds\ and more) not working on my device. No matter how long I hold the two it just won't reset the device.
Can you change the bootloader? - Hard reset no longer working, Any insight?
So I have been trying to overcome the issue of power + vol up (held for 10, 15 seconds\ and more) not working on my device. No matter how long I hold the two it just won't reset the device.
At first I figured it could be kernel as that is the lowest code that I've knowingly changed.
Changing to back to stock kernel did not fix it.
Click to expand...
Click to collapse
Maddhouse said:
So I have been trying to overcome the issue of power + vol up (held for 10, 15 seconds\ and more) not working on my device. No matter how long I hold the two it just won't reset the device.
Click to expand...
Click to collapse
Yeah thats the one
Maddhouse said:
Power + volume up + down all together
Click to expand...
Click to collapse
Already tried that but no luck.
Stranger still is that I've began to notice that in flash mode the LED briefly flick green once then turns off when entering flash mode. Flash mode is still active, it just appears as though the phone is off :/