I've been having a hard time getting tethering to work in general, but barnacle seems to be the best so far. However, there's a lot of settings that i don't know the purpose of, like channel, etc. I'm using a mac book pro.
The issues I'm having with barnacle are mainly that it disconnects my IM services randomly, and also stops responding randomly. The wifi-tether-app is worse, as it just simply stops responding and internet starts disappearing all together, the actual 3G icon starts disappearing and reappearing.
I was viewing - android.modaco.com/content/samsung-galaxy-s-s-modaco-com/313988/wifi-tether-working-on-vibrant < this thread and it gives specific settings for the phone in question. Is there something I need to do for the droid? I'd just like to understand what the 'channel' settings and everything on barnacle tether are for. Thanks for the help!
Related
What happens is that the wifi shows connected with good signal strength, both with public access points and my router at home, but I can't access the internet, browsers, weather updates, etc. don't work at all. Opera just shows error connecting to the remote network. GPRS works fine and the browser connects, no idea about 3G as I don't have it. A USB connection works fine too, no problem using the internet with that.
It happens after a few days of using the rom before this problem comes up. I've had this problem for two different roms I've tried. Not too sure what's causing it but a hard reset seems to fix it, but I don't want to keep doing that either. Tried looking around the settings that might cause this, but I can't find anything that seems to cause it.
Anyone have any ideas?
If it works after a hard reset/ROM flash, then eventually "breaks", it might be a 3rd-party application that's causing the problem.
Ok I have a very iritating problem.
My captivate works amazing in all ways... except one. When I'm at home connected to Wifi, within a few mins of me putting the phone down, or even mid use, the wifi will just stop working. The icon still shows it to be connected however no apps are able to actually get internet. A quick pulldown of the quick access menu and tapping wifi off and back on again gets it going great... for another 5 mins. Then the same thing happens.
Its been like this ever since I got the phone, even after flashing different roms. Now i'm running a Linksys Wireless - N router - maybe they're not playing nice?
I dont think its a hardware fault because when I serve wifi, IE the captivate is an infrastructure mode access point for 3g, it stays on consistently and my laptop can tether for 2 hours or more.
Anyone know what might be causing this?
Thanks
When you have wifi on, go to menu settings and 'Wireless and network'. In Wi-Fi settings you can change the Wi-Fi timeout.
nickbarbs said:
Ok I have a very iritating problem.
My captivate works amazing in all ways... except one. When I'm at home connected to Wifi, within a few mins of me putting the phone down, or even mid use, the wifi will just stop working. The icon still shows it to be connected however no apps are able to actually get internet. A quick pulldown of the quick access menu and tapping wifi off and back on again gets it going great... for another 5 mins. Then the same thing happens.
Its been like this ever since I got the phone, even after flashing different roms. Now i'm running a Linksys Wireless - N router - maybe they're not playing nice?
I dont think its a hardware fault because when I serve wifi, IE the captivate is an infrastructure mode access point for 3g, it stays on consistently and my laptop can tether for 2 hours or more.
Anyone know what might be causing this?
Thanks
Click to expand...
Click to collapse
Try goin to settings->wireless and networks-> wifi settings (menu key)advanced and set the sleeping policy to never
I've done that...
i *Think* i've fixed it. I was using WPA2 IPK encryption or whatever.. Switched back to the 64 bit crappy WEP. Wifi was on all night and all morning with no cut out.
Might be just another linksys-is-crap situation.
HI, I figured I keep my wifi woes within a singe thread so.
I have an old D Link WBS 2310 router.
I recently got a message from AT&T that I'm near my data limit. This surprised me as my last cycle I barely got near 500mb. Since my bill isn't ready yet, I can't see exactly what it is I'm doing to use so much data.
TO be safe I figured I'd pull out my old router and set it up. After hours of hassle getting it to work on my new computer, I wasn't able to get my Captivate to hook up to it.
My laptop works fine. It gets a fast wifi signal, but my phone just says "Obtaining IP address" for a while and then gives up.
My phone gets wifi at work, at friends', at coffee shops - but not at home.
I've tried this with no encryption, WEP encryption and WPA2 encryption.
Each time my laptop would hook up to the wifi but my phone wouldn't.
I searched some other forums and found similar problems with HTC phones.
Some answers say that D Link sucks. But that answer applies to other brands as well.
Do I need "n" wifi, rather than "g"?
I don't want to buy another router only to find it still doesn't work.
Any help?
gluvox said:
HI, I figured I keep my wifi woes within a singe thread so.
I have an old D Link WBS 2310 router.
I recently got a message from AT&T that I'm near my data limit. This surprised me as my last cycle I barely got near 500mb. Since my bill isn't ready yet, I can't see exactly what it is I'm doing to use so much data.
TO be safe I figured I'd pull out my old router and set it up. After hours of hassle getting it to work on my new computer, I wasn't able to get my Captivate to hook up to it.
My laptop works fine. It gets a fast wifi signal, but my phone just says "Obtaining IP address" for a while and then gives up.
My phone gets wifi at work, at friends', at coffee shops - but not at home.
I've tried this with no encryption, WEP encryption and WPA2 encryption.
Each time my laptop would hook up to the wifi but my phone wouldn't.
I searched some other forums and found similar problems with HTC phones.
Some answers say that D Link sucks. But that answer applies to other brands as well.
Do I need "n" wifi, rather than "g"?
I don't want to buy another router only to find it still doesn't work.
Any help?
Click to expand...
Click to collapse
part of the IEEE 802.11n standard is backward compatibility with all previous 802.11 standards IIRC, so there should be no need to buy a new n device.
HOWEVER, i am also having issues with my wi-fi and my g capable router. i will meddle around with some phone and router settings to see if i can fix this, this is one area were i can actually be of some use on this forum
Hi. It turned out the wifi was broken on my captivate. I reset it to stock and it's all better. It had been working up to the previous day so I assumed that it was still working. The router goes down intermittently in general, so I've ordered a new one to see what's up.
Hi, I'm back! So after resetting the phone and getting wifi to actually connect (rather than being stuck searching for IP address), I'm now having the exact same problem is the OP. The OP seems to have solved this by switching to WEP. I tried this and it doesn't work. My timeout is set to never. Also, it's the same at home (I replaced my router) as well as at Starbucks and a friends house.
I'm connected, but can't download or sync. It works initially and then stops, and then comes back in briefly and then stops, all the while "connected." Sometimes I can fix it temporarily by turning off wifi and then turning it back on.
SO what's the deal? Is it a hardware problem? Is there some secret magic code?
edit: Just disabled encryption - same problem.
I seem to be having pretty severe wifi issues on networks that are composed of a large number of routers (i.e. campus/business networks) where going between routers will result in the phone believing it is connected, but not being able to send/receive data. This is evidenced both by the lack of notifications/apps working, as well as the wifi icon in the quick toggle panel being orange (which indicates no data being sent/recieved, I believe) despite having full signal. This means that without any external indication that anything is wrong, my phone essentially does not work anymore until I turn the wifi off and back on. Previous phones (galaxy nexus, droid) as well as computers did not have this issue on the same network.
Has anyone else noticed this problem, and if so, found any way to get around it other than remembering to reset the wifi power every time you move between areas?
It sounds like there are multiple WAPs all using the same SSID, and Android is not requesting a new IP address when it disconnects from one WAP and connects to another. You could probably work around the issue using Tasker, and have it toggle Wifi off and on again any time Wifi is disconnected. I you go that route I would recommend using the trial version available from the developer's site, or one of the many similar apps that are available in the Play Store for free.
There may be something more to this though. Hopefully someone else has another idea.
WiFi issues
ice20978 said:
I seem to be having pretty severe wifi issues on networks that are composed of a large number of routers (i.e. campus/business networks) where going between routers will result in the phone believing it is connected, but not being able to send/receive data. This is evidenced both by the lack of notifications/apps working, as well as the wifi icon in the quick toggle panel being orange (which indicates no data being sent/recieved, I believe) despite having full signal. This means that without any external indication that anything is wrong, my phone essentially does not work anymore until I turn the wifi off and back on. Previous phones (galaxy nexus, droid) as well as computers did not have this issue on the same network.
Has anyone else noticed this problem, and if so, found any way to get around it other than remembering to reset the wifi power every time you move between areas?
Click to expand...
Click to collapse
I'm having the same issues both out in public and at my home. This issue didn't seem to exist prior to 4.4 update. Now I'm constantly having to toggle my WiFi on and off or toggle airplane mode and also hitting the symbol down at the bottom left on my phone and on my router at the same time. If someone has any information to correct this would be great. Like I said I never had this problem prior to 4.4.
UncleMike said:
It sounds like there are multiple WAPs all using the same SSID, and Android is not requesting a new IP address when it disconnects from one WAP and connects to another. You could probably work around the issue using Tasker, and have it toggle Wifi off and on again any time Wifi is disconnected. I you go that route I would recommend using the trial version available from the developer's site, or one of the many similar apps that are available in the Play Store for free.
There may be something more to this though. Hopefully someone else has another idea.
Click to expand...
Click to collapse
Thanks for the suggestion! One question though: does the wifi actually "disconnect" when there is a handover between two routers of the same network? Is a handover while constantly connected something tasker could detect?
ice20978 said:
Thanks for the suggestion! One question though: does the wifi actually "disconnect" when there is a handover between two routers of the same network? Is a handover while constantly connected something tasker could detect?
Click to expand...
Click to collapse
As far as I know, Android doesn't "roam" seamlessly from one AP to another even when the SSIDs are the same. I'm pretty sure Tasker would see this as Wifi being disconnected (albeit briefly). You could then tell Tasker to turn off Wifi for 5 seconds and then turn it back on again.
UncleMike said:
As far as I know, Android doesn't "roam" seamlessly from one AP to another even when the SSIDs are the same. I'm pretty sure Tasker would see this as Wifi being disconnected (albeit briefly). You could then tell Tasker to turn off Wifi for 5 seconds and then turn it back on again.
Click to expand...
Click to collapse
I finally got around to making a tasker script to do this, and tried it out for a few days, but unfortunately it does not seem to detect the changing between the different routers on my institute network as having the wifi disconnected, and thus doesn't solve the issue. It was a good idea to try though!
I've cross-posted the issue at the link below in hope motorola will see this, but if anyone knows a better way to report this, please let me know.
https://forums.motorola.com/posts/68884aa31b
I use my Droid Turbo as a hotspot for the Nexus 7 I have installed in my dash. I use Tasker to automate the process, so that it turns on the hotspot when a connection is established with Tablet Talk, and then turns it off when the connection is lost. (Actually, because third party apps are apparently unable to turn off the hotspot, I just have it bring up the wifi settings page.) This worked well on my old rooted Razr Maxx, both on the original firmware and with CM11.
On the Droid Turbo, it will work great for 2-3 times, but after that it will stop sharing the phone's internet connection. The hotspot is still created, the Nexus still connects to the hotspot just fine, but it can't access the internet anymore. I tried a factory reset, and the same issue came up.
I know it's a bit obscure, but any suggestions? At this point I have to restart my phone every day or so to keep it working, which is quite annoying without root.
CABCDEFG said:
I use my Droid Turbo as a hotspot for the Nexus 7 I have installed in my dash. I use Tasker to automate the process, so that it turns on the hotspot when a connection is established with Tablet Talk, and then turns it off when the connection is lost. (Actually, because third party apps are apparently unable to turn off the hotspot, I just have it bring up the wifi settings page.) This worked well on my old rooted Razr Maxx, both on the original firmware and with CM11.
On the Droid Turbo, it will work great for 2-3 times, but after that it will stop sharing the phone's internet connection. The hotspot is still created, the Nexus still connects to the hotspot just fine, but it can't access the internet anymore. I tried a factory reset, and the same issue came up.
I know it's a bit obscure, but any suggestions? At this point I have to restart my phone every day or so to keep it working, which is quite annoying without root.
Click to expand...
Click to collapse
Its a bug introduced with the last OTA. It *should* be fixed next update.
Running any Marshmallow rom on this phone always turns the wifi off after about 30 seconds of screen-off time. This is incredibly frustrating because it breaks any app I have running in the background that uses wifi. For example netflix on chromecast always loses it's connection and I cant control my chromecast because the wifi disconnected. It's also needlessly using cellular data while asleep.
I have checked all the wifi options and theyre all set correctly. There is a whole 10 pages of complaints about this on a simple google search with no real solution provided. You guys have any ideas?