Related
I have a Mytouch 3G running test 7 on my phone, and i just installed the clockworkmod rom manger. After, installed it i wanted to flash a new rom, so flashed the clockwork mod recovery, and when i tried to install the new rom from the sd card, it keeps on getting stuck on the mytouch screen, and nothing happens. How do i get into the recovery screen? thanks
First: This belongs in Q & A !!!!111
Which ROM did you flash? Maybe you had to wipe before
right now, i'm running cyanogen test-7, but when i go into the clockworkmod rom manger app and pick the flash rom from sd card, it just says it has to go to the recovery, and then my phone will reset and it would just get stuck on the mytouch screen. So, i just pull out the battery and reset the phone again, and i realized if i press the end button, it will go the rom that is already on the phone. I'm i suppose to push some buttons or something to get to the recovery screen?
No it should flash the rom you select and reboot the phone to boot the new rom without keypress needed.
maybe the wrong device was selected when downloading the recovery image? Try reinstalling clockworkmod recovery from rom manager.
Mod edit: not dev related, moved to q&a
I have the same problem.
I downloaded and installed Rom Manager from the Market and it has completely screwed up my recovery (I can't get into it at all). I tried flashing Amon's again (through Rom Manager) and it still doesn't work.
HTC G1. CM5.07 test 7 (trying to go to stable!).
Your recovery has been corrupted, you will need to flash it through fastboot.
JAguirre1231 said:
Your recovery has been corrupted, you will need to flash it through fastboot.
Click to expand...
Click to collapse
Yes thank you. I erased recovery partition in fastboot then reflashed Amon's.
Working now.
i got into the fastboot screen, but i have 4 options. hboot mode, reset device, restart to hboot, and power down. how do i flash from here?
illmatic282 said:
i got into the fastboot screen, but i have 4 options. hboot mode, reset device, restart to hboot, and power down. how do i flash from here?
Click to expand...
Click to collapse
Connect to your PC via USB, and from the command line issue "fastboot erase recovery" and then "fastboot flash recovery filename.img"
More on common fastboot commands here can be found on these forums, i'm not allowed to post links.
i connected my phone to my computer but nothing on my computer pops up. only the new hardware wizzard pops up. what do i do from here? im i suppose to get a adb popup? how do i set up the fast boot? i'm so confused..thanks
some one, please help..i want to be able to flash new roms in the future...thanks in advance
Can I sugges that you try this sticky thread at the top of this forum board.
It contains all you need to know on who to set up fastboot and how to use it - there are a couple of tutorials on it if you read through the thread.
CM 5.0.7 for Dream/Sapphire introduced a bug in flash_image. It causes recovery flashes to fail. It has since been fixed in the latest test of 5.0.8 I believe.
Man i have the same darn bug cant get back into recovery for nothing, and i dont have a pc to fastboot i have a non intel based mac so no adb or fastbooting, i have been doing fine for forever without adb or fastboot but is there any way around this one, i need help bad, im on HTTClay Superbadv1.3 and it has all sorts of bugs but i cant nandroid or bart or flash any rom without recovery, can someone please help!!!
Also is there another way to erase the recovery partition?
For the past few months I've been flashing separate Energy Roms onto my tilt 2. I finally found one that I liked and stuck with it for the past few weeks, which was the Dinik Glass Energy rom.
Everything was running great until last night when I was watching a video on You tube and everything froze up. I pulled the battery out and turned the phone back on and now it keeps going to the boot loader screen....
I've tried re flashing different roms to see if that would work but I've gotten nothing out of it.
If anyone could let me know of anything that i could possibly do to try and fix this I would be highly appreciative of it.
I dont know what may have caused the problem but in your situation i would have tried to do task29, flash radio and then flash a new ROM. this is normally how i flash my roms but task29 may remove somethin that may be causing the problem. if you have already done so, sorry for wasting 5 secs of your life ... let me know if it worked
Can you show me where I can dl task 29 at?
I had the same thing happen to my tilt2 last week!
Use task 29,
dont freak out when it only shows the screen that says touch pro 2.
Enter into bootloader and run ruu from there, it will fix everything.
Dont flash with sd card in or it will happen again.
I had to clear my sd card and reload it! good luck.
one more thing after task 29 do not disconnect from usb until you load next rom, that is what worked for me best.
hope it helps
I used the RUU and i tried reloading the ROM but it still starts in boot loader screen every time.
Should I just hit the hard reset?
you have nothing to loose by a hard reset at this point ... IF that works.
If I hard reset it will I have to flash a hard spl again?
Ok i noticed that yoy are pritty confused about the terminolog, so here is some help:
1. Task 29 - delets your rom of the phone so your phone become practicly unuseble.
2. HardSpl - "Unocks" (allowes) the phone for flashing custom made roms - i.e. all roms and ro preform Task 29.
3. Hard rest - reinstalls allready flashed rom.
4. Soft reset restart the phone - on/of
5. BOOTLOADER - allowes you to flash without activesync and from Sd card.
When any problem turns on with phene i usually check to see if there is any connection running. I discovered that too much internet over phone makes a phone buggy dissregarding the rom.
You dont have to hardspl phone again, once you did is enough.
Okay well here is the problem then... every time I turn the phone on it goes straight to bootloader. The only button I press to turn the phone on is the main power button. I've ran the custom RUU twice now. I've tried flashing a new rom onto the phone via sd card but it still turns on in bootloader mode. I'm nearly freaking out now because I'm led to believe I've got a bricked piece of $hit.
I hate sounding like a noob but if there is some way someone could run a step by step process to me that works I might through some $$ via pay pal.
Joe Mustard said:
Okay well here is the problem then... every time I turn the phone on it goes straight to bootloader. The only button I press to turn the phone on is the main power button. I've ran the custom RUU twice now. I've tried flashing a new rom onto the phone via sd card but it still turns on in bootloader mode. I'm nearly freaking out now because I'm led to believe I've got a bricked piece of $hit.
I hate sounding like a noob but if there is some way someone could run a step by step process to me that works I might through some $$ via pay pal.
Click to expand...
Click to collapse
I had the same problem with a phone about a month ago. I was able to flash the stock rom and it would boot up then put on the stock SPL and relock the phone. Sometimes I was able to take the battery out and get it to boot but even with the stock ROM I was getting the bootloader at startup. So once I reloaded the stock ROM and relocked it, I returned it and got a replacement.
Sorry, nothing I did every resolved the problem.
good luck.
I agree with taking everything back to stock
flash stock rom
do a spl relock
and start over...
oh, and dont forget about radios! idk if that could be part of the problem tho
I never changed the radio's so I should be good to go then, just the stock rom?
Try this :
- Enter bootloader
- Connect USB cable so "serial" in the bootloader changed to "USB"
- Perform Task29
- Reset
- If the phone enters bootloader skip this step. If not, hold volume down key while resetting (push the reset switch with stylus). The phone will enter bootloader.
- Flash a stock ROM. Download it from HTC website if you don't have one.
- Reboot.
Ow, the stock ROM also contains Radio. So Flashing with stock ROM will flash your radio also.
gabmurillo said:
I had the same problem with a phone about a month ago. I was able to flash the stock rom and it would boot up then put on the stock SPL and relock the phone. Sometimes I was able to take the battery out and get it to boot but even with the stock ROM I was getting the bootloader at startup. So once I reloaded the stock ROM and relocked it, I returned it and got a replacement.
Sorry, nothing I did every resolved the problem.
good luck.
Click to expand...
Click to collapse
When you returned your phone and got a replacement was your phone starting in boot loader?
If so how did the workers at the ATT store react to that so I know what to expect?
shadixs said:
Try this :
- Enter bootloader
- Connect USB cable so "serial" in the bootloader changed to "USB"
- Perform Task29
- Reset
- If the phone enters bootloader skip this step. If not, hold volume down key while resetting (push the reset switch with stylus). The phone will enter bootloader.
- Flash a stock ROM. Download it from HTC website if you don't have one.
- Reboot.
Ow, the stock ROM also contains Radio. So Flashing with stock ROM will flash your radio also.
Click to expand...
Click to collapse
How would you recommend that I flash the stock ROM back on?
I'm kind of confused because I've always flashed with my SD card, how do I do it through my USB? Could you give me a step by step?
Well, those steps I wrote are basically "step-by-step how to flash from usb".
Allow me to clear it:
- Enter bootloader -> Hold volume down button while pushing the reset switch
- Connect USB cable to your computer. and wait until the "serial" word in the bootloader changed to "USB"
- Perform Task29, download task29 and unzip it. run ROMUpdateUtility.exe. Follow the instruction.
- Reset/reboot. well, the phone will reboot itself after task29 is completed
- If the phone enters bootloader skip this step. If not, hold volume down key while resetting (push the reset switch with stylus). The phone will enter bootloader. Connect the usb cable again to your computer (if you disconnect it.) and wait until the word "serial" changed to "usb" again.
- Flash a stock ROM. Download it from HTC website if you don't have one. Just run the exe file you downloaded and follow the wizard.
- Reboot.
I reccomend you to flash with stock ROM because Stock ROMs are "Guaranteed to work(at least by HTC )" and contains radio that may be the cause of your problem. there's no need to flash to stock SPL, yet.
I was stuck in bootloader...
You can find task 29 here. I always do this before flashing.
After task 29, make sure USB is still plugged in and enter bootloader by holding Volume Down key while hitting the reset button. You should see USB on the bottom of the bootloader screen.
Now you should be able to flash the NRG ROM by running the RUU in the same folder as your ROM (rhodium.nbh file).
If this doesn't help, search the entire forum for "stuck in bootloader." I did this and it saved me the hassle of the warranty process.
Before
[/URL]
Joe Mustard said:
Can you show me where I can dl task 29 at?
Click to expand...
Click to collapse
Joe Mustard said:
When you returned your phone and got a replacement was your phone starting in boot loader?
If so how did the workers at the ATT store react to that so I know what to expect?
Click to expand...
Click to collapse
I was able to get it to boot to the ROM by removing the battery several times and reinserting, powering on until it boot. I am on TMobile and called them and they sent me a new phone and returned the old through the mail after expalining the problem. So never went into the store.
good luck.
I have searched other posts and not found my same problem, so excuse me if I repeat another thread.
I have a rooted g1 running superfly v1.2 D/S. I tried to use Rom Manager to flash another ROM, but upon reboot it never flashed, it just stayed at the T-mobile/G1 boot screen.
I then took out the battery, and tried to do a manual reboot to recovery (power+home) and I never got into recovery mode, it just stayed at the G1 screen again.
I then tried fastboot (power+camera) but that took me no where. My only options were to shutdown, go back to hboot, reset data, and one other thing I can't remember.
When I take out the battery and then power back on again, it boots up the superfly ROM and starts up normally.
My Question is how can I get into recovery mode to flash a different ROM, and why doesn't it work through ROM Manager?
Looks like your recovery got erased...you have two options....
1. Setup fastboot on you PC, flash a new recovery from fastboot. this is the best and safe method...
2. flash a recovery from terminal...you might have to do this step multiple times...flash recovery...power off the phone, power on holding home button and see if you have working recovery...if not restart the phone and flash again...
I would go with 1st option.
mbh8280 said:
I have searched other posts and not found my same problem, so excuse me if I repeat another thread.
I have a rooted g1 running superfly v1.2 D/S. I tried to use Rom Manager to flash another ROM, but upon reboot it never flashed, it just stayed at the T-mobile/G1 boot screen.
I then took out the battery, and tried to do a manual reboot to recovery (power+home) and I never got into recovery mode, it just stayed at the G1 screen again.
I then tried fastboot (power+camera) but that took me no where. My only options were to shutdown, go back to hboot, reset data, and one other thing I can't remember.
When I take out the battery and then power back on again, it boots up the superfly ROM and starts up normally.
My Question is how can I get into recovery mode to flash a different ROM, and why doesn't it work through ROM Manager?
Click to expand...
Click to collapse
Most likely your recovery is corrupted. Flashing a recovery from within CM5/CM6 is not working well, so you need to flash a new recovery using fastboot.
When in fastboot mode, you can "control" your phone from your pc using the fastboot command. For this you need to connect your phone to your pc by USB.
Search here for the ADB/Fastboot threat, where you will find further information.
Sent from my Htcclay's Superfly G1 BTX using XDA App
I haven't touched my Rogers G1 rom, it is as stock as they come. One day the battery died, so I plugged the phone to charge and also tried to start it up.
My problem started after that.
I will try to restart the phone and it'll get stuck on boot screen - where it says HTC or sometimes even just the Rogers screen.
Only solution is to take battery out, do hard reset.
I've searched the forums but everybody else asks regarding modded roms and not stock.
Any idea how I could resolve this issue without flashing new roms? Or is that my only way out?
Thanks.
Did you apply Rogers mandatory 911 update that was released about a year ago? You can check by booting into fastboot mode (hold the camera button while powering it on). If your radio version is 3.22.26.17 you have the update. Rogers locked down fastboot in this latest update and the only way to root it is through the ROM. If you don't have this update I can walk you though the steps to root your phone though fastboot.
Just checked and it does have the update.
Should I just go ahead and flash new roms?
I keep having the same issue as before.
With the latest update Rogers locked down fastboot so it is useless. So, I don't believe that there is any way to flash a new ROM without first booting into your existing ROM.
Sorry but I'm inexperienced with flashing roms...
If I can't flash by the fastboot method, I can still flash by rooting the phone, correct?
JiggyNS said:
Sorry but I'm inexperienced with flashing roms...
If I can't flash by the fastboot method, I can still flash by rooting the phone, correct?
Click to expand...
Click to collapse
I'm not completely sure, but usually you need to be able to get into the rom to root. Maybe there is another way.
6 hours later and i got nowhere...
I rooted phone, flashed new cyanogen rom, setup amon ra's recovery but I didn't do new radio since my current is one of the newer ones.
The booting goes nowhere as soon as the rogers logo shows at the beginning of boot up.
Would a new radio help? Could that be the issue?
edit:
The phone rebooted properly and now I have a working fone!
Wait, how did you root the phone without getting into the ROM?
beav_35 said:
Wait, how did you root the phone without getting into the ROM?
Click to expand...
Click to collapse
I used the Androot method, copied onto sd card, launched file via file manager app on phone and it rooted the phone. This is how I remember anyways - I fiddled with the phone for good part of the afternoon so my memory is all over the place with the specifics.
I used this site for rooting.
I thought you said in the op that you couldn't boot into the ROM (got stuck on boot screen). So, what was the problem in the first place? (or how did you fix the ROM?)
Sorry I guess I wasn't clear enough in op.
The only way I could get to use the phone was to do a hard reset and let the phone boot up from there, however if I ever wanted to turn the phone off or restart the phone it would get stuck on the next boot up.
I was able to flash the rom by constantly hard reseting the phone every time I needed to put files onto the memory card.
My motorola Nexus 6 won't turn on, when I try to power it on, it shows the Google sign then shuts off immediately. When I plug in the charger from a complete power off, the white battery sign keeps flashing, it shows for 1 second then shuts off then repeats the cycle of showing the battery sign then shutting off. It boots into bootloader/fastboot mode fine, and I have tried flashing the factory image, it flashes fine but it still shuts off immediately while showing the google sign. It won't even boot into recovery after the flash, it just shuts off after the google sign. This isn't my first nexus, in know that flashing factory image should fix 99% of issues. Please help.
P.S I didn't purchase officially from google or Motorola, bought it from a guy who claimed he bricked it trying to install a font pack so I figured let me buy it and restore factory image. Didn't work. I tried flashing manually, the process went fine, but it it still turns off at google splash image. I tried Wugfresh toolkit also to no avail. He said he rooted it, installed custom recovery and euphoria os rom. Then he installed the fontpack, it told him to reboot to apply changes, and it wouldn't boot past google screen after that. It doesnt even get to the boot animation. It just shuts off. When its off and u plug in the charger it does the same thing, you just keep seeing the charging symbol over and over because its constantly rebooting. Its a T-Mobile Nexus 6 BTW, model number XT1103. I spoke to my friend who has a local repair shop and he says there is nothing out for his z3x or his other boxes for the nexus 6 because it is such a new and rare device. His theory is that the partition tables have been corrupted somehow and need to be rewritten manually. Please any help would be appreciated. I can promise a hefty $$ reward for any individual that helps me recover it to a working state.
can you get a custom recovery on successfully.........?
did you flash the stock image manually?
mediaman123 said:
can you get a custom recovery on successfully.........?
did you flash the stock image manually?
Click to expand...
Click to collapse
Yes I tried pushing the stock recovery individually and it succeeded in the command prompt, but won't enter recovery, just shows google and shuts off. I tried pushing twrp too but same outcome. Yes I had flashed the stock image manually, everything flashed well from what the command promt said, but when it should reboot to recovery after flash to wipe, just shuts off.
jeromechrome1 said:
Yes I tried pushing the stock recovery individually and it succeeded in the command prompt, but won't enter recovery, just shows google and shuts off. I tried pushing twrp too but same outcome. Yes I had flashed the stock image manually, everything flashed well from what the command promt said, but when it should reboot to recovery after flash to wipe, just shuts off.
Click to expand...
Click to collapse
Please! Anyone!
by manually do you mean flashing all the separate parts of the stock image separately, system, boot, recovery, cache and so on..........
I don't know what else to do after going through with that process.....
Make sure you have the latest fastboot by updating SDK Manager. Then reflash bootloader then reboot back to bootloader to reset. Then proceed to flash each partition again. Directions below.
fastboot flash bootloader bootloader.img <-- rename bootloader to this to make it easier
fastboot flash radio radio.img <--- again rename to make easier
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash recovery recovery.img
fasyboot flash system system.img
Hope this helps.
I'm a total newb here so take what I tell you with a grain of salt. I had your exact same problem on my Nexus 5. Every single thing you just described is what happened to my N5. And just like your N6...I was able to boot up into recovery (stock and TWRP), I was able to flash all the things manually and even used Wug's NRT. But then whenever I tried to actually boot up the device it could never pass the Google logo....basically EVERYTHING THAT IS HAPPENING TO YOU.
What I did to fix everything? Changed my battery. Sounds stupid and totally irrelevant but that did the trick. When I opened up my phone I noticed my battery had a nasty bulge and realized it was defective. Bought a new one for $25 and have never had any issues ever since. I suggest you look at your battery and see if that is the root of your problem. I have heard of the N6 having some batteries expanding and causing the back covers to pop off...this could be related to your problem.
Like I said I am a newb and thought I'd share my experience in the hopes it solves your problem.
Good luck buddy! :good:
my N6 is actually away getting repaired for the exact issue you described, expanding battery [assumed], and cover coming away from the bezel.....
I believe though that if you keep the device plugged into the wall when trying to boot up with this battery defect it will get through the boot, at least in the beginning anyway....
I believe also that if it was a battery issue the device would power off first, as opposed to just sticking on the Google logo.........
ldkud50 said:
Make sure you have the latest fastboot by updating SDK Manager. Then reflash bootloader then reboot back to bootloader to reset. Then proceed to flash each partition again. Directions below.
fastboot flash bootloader bootloader.img <-- rename bootloader to this to make it easier
fastboot flash radio radio.img <--- again rename to make easier
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash recovery recovery.img
fasyboot flash system system.img
Hope this helps.
Click to expand...
Click to collapse
I tried all of that already bro, it takes the files fine i did each individually including the bootloader. yes i have the latest sdk and latest fasboot. same issue no matter what i try. thank you all for ur help so far, really appreciate it.
jeromechrome1 said:
I tried all of that already bro, it takes the files fine i did each individually including the bootloader. yes i have the latest sdk and latest fasboot. same issue no matter what i try. thank you all for ur help so far, really appreciate it.
Click to expand...
Click to collapse
Thats too bad. Maybe the device is hosed. RMA for a new one.
Same thing happened to me. As soon as I updated to the newest version of fastboot on my computer, everything worked...
jeromechrome1 said:
My motorola Nexus 6 won't turn on, when I try to power it on, it shows the Google sign then shuts off immediately. When I plug in the charger from a complete power off, the white battery sign keeps flashing, it shows for 1 second then shuts off then repeats the cycle of showing the battery sign then shutting off. It boots into bootloader/fastboot mode fine, and I have tried flashing the factory image, it flashes fine but it still shuts off immediately while showing the google sign. It won't even boot into recovery after the flash, it just shuts off after the google sign. This isn't my first nexus, in know that flashing factory image should fix 99% of issues. Please help.
P.S I didn't purchase officially from google or Motorola, bought it from a guy who claimed he bricked it trying to install a font pack so I figured let me buy it and restore factory image. Didn't work. I tried flashing manually, the process went fine, but it it still turns off at google splash image. I tried Wugfresh toolkit also to no avail. He said he rooted it, installed custom recovery and euphoria os rom. Then he installed the fontpack, it told him to reboot to apply changes, and it wouldn't boot past google screen after that. It doesnt even get to the boot animation. It just shuts off. When its off and u plug in the charger it does the same thing, you just keep seeing the charging symbol over and over because its constantly rebooting. Its a T-Mobile Nexus 6 BTW, model number XT1103. I spoke to my friend who has a local repair shop and he says there is nothing out for his z3x or his other boxes for the nexus 6 because it is such a new and rare device. His theory is that the partition tables have been corrupted somehow and need to be rewritten manually. Please any help would be appreciated. I can promise a hefty $$ reward for any individual that helps me recover it to a working state.
Click to expand...
Click to collapse
I know, it's been a long time, but coud you tell me what happened to the phone?