[Q] Moding and installing custom 2.2 India - Galaxy S I9000 Q&A, Help & Troubleshooting

1st A big Hiiii from India.
I am a noob in this android scene. The most closest experience I have had to this is moding PSP's(done so many can't count) bricked and unbricked as well.
I got my SGS this week and the first day itself i started to see how i can make it better.(had seen a lot of vid in youtube). Some problems i faced initially was:
1. the 3 key hold to go into recovery mode just wont work for me so i used the easy reboot recovery script.
2. Intially i tried a couple of roots which would give me errors like it failed to run. The phone came with DDJG4 and i was able to get Superuser 2.3.1 was able to update SU database to V5 from android market.
3. Installed Ryan ZA lagfix 1.6.0 from market and now I am able to get a quadrant score of 2172. Earlier it was around 900.
What I want to do now is to have 2.2 froyo on it. I want feedback as well as help. Feedback as in is it worth it? How do I goto 2.2 custom and which one? where do i get rom and which custom one to go for. I have been seeing so much of stuff on the internet that i am a little too much confused. All help appreciated and thanks for your post.

DO NOT INSTALL FROYO! you will brick or have problems. Read all the people who installed Jpc and prev betas. Seriously. Im sick of people asking for help after installing froyo who have not done their research as to how much problems it has. Also your phone had download disabled. If you screw up there's nothing anyone can do other then tell you to get hair dryer and heat the thing up. Also don't ask me about that as im not stupid enough to install unofficial froyo
Sent from my GT-I9000 using Tapatalk

DDJG4 is gr8 .. dont try to install any Froyo build as of now.. i have tried all and have experienced a lot of issue and reverted back final to DDJG4 ... wait for the official release or mess things up as u like.....

dewimagica said:
DDJG4 is gr8 .. dont try to install any Froyo build as of now.. i have tried all and have experienced a lot of issue and reverted back final to DDJG4 ... wait for the official release or mess things up as u like.....
Click to expand...
Click to collapse
how to revert back to DDJG4... cant find ne thing...

Alright folks i am so sorry had been away! I am really sorry i did not check the posts however was really restless to see flash 10 so I ended up using odin to get into I9000ZSJP2 I used paul's rom with clockwork mod from modaco.
It was real laggy and the ryan fix also dint help much. So I downloaded the OG DDJG4 as well as I9000XXJPC. Wanted to give one last try as had seen a lot of youtube vids of it being the most stable one out there.
Frankly it worked like a charm. I used it for couple of days it had all the features working. I even rooted it the way told in xda here. by using odin and couple of files. I restarted it many times and had no issues.
Suddenly this is the problem when i switched it off to switch my sim. The phone starts goes to Galaxy S logo and stays there for like 2 mins and then it goes black.
None of the recovery mode combo and download mode combo work for me hence I had to use script.
The script also dont work now over USB. I tried removing sim and sd card. How do i get back to JG4. all help appreciated. I am sure i am not going to froyo until final build if i get this fixed.

ickyboo said:
DO NOT INSTALL FROYO! you will brick or have problems. Read all the people who installed Jpc and prev betas. Seriously. Im sick of people asking for help after installing froyo who have not done their research as to how much problems it has. Also your phone had download disabled. If you screw up there's nothing anyone can do other then tell you to get hair dryer and heat the thing up. Also don't ask me about that as im not stupid enough to install unofficial froyo
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
ok i had froyo jpc and then easily went back to eclailr build because of bugs and then went to the hk jp2 which i love. yes he can have issues but bricking the phone is hard with odin if you follow the instructions

I dont think mine is brick eh! i can still turn it on. Its more like a no boot. Brick is a no post

I tried both JP2 and JP3 and they were OK at best since they were in early beta and inspite of speed, they were unstable and very unstable. I would say they are good to play around a bit but definitely not for daily use.
If you still want to get your hands wet, you can try Doc's RomMod Froyo V2 + Superlite (I9000XXJPC) 9/9/10
But as every one is saying already, stick to the current ROM and wait for an official release from Samsung.
Just don't forget to install a lag fix.
And don't worry about bricking, it's very hard to brick your phone, so go ahead and give a try and play around to know your device better.
Enjoy the SGS!

Thx mate.. needed some emotional support on this one.. well i have to report officially I could not get my phone working and recognized by Odin. The guys at samsung service center also gave up after looking at it for 30 mins. I have to say.. they knew less than I did about the phone. I have said its less then 7 days so either they fix software of I replace the phone. Thats how it works in india and guess what I went on the 7th day I read a lot of peps here sayin if the phone does not go into recovery or download by key combo it is getting replaced. I am going to post soon what happens. Until then keeping my fingers crossed and prayers.
PS: another guy in my office has SGS and he is able to go to recovery and download so its not like an all india thing.

I got my phone back last week they replaced it with another one with JG4

Which City do you live in? I have a Bricked phone and I am thinking of getting it replaced.

dhiru1602 said:
Which City do you live in? I have a Bricked phone and I am thinking of getting it replaced.
Click to expand...
Click to collapse
I am from HYD.. Btw I found a way to fix the non three button fix from the forum itself.. i just fixed one of my friend who had the recovery mode hold not working.. ova the weekend..

Related

Phone stuck in restart loop! HELP!

Ive been running a custom notifcation bar (ClearBar)
i just used metamorph to revert to stock, using the devs clear-to-stock theme
phones now stuck in a loop whereas it boots, freezes and restarts over and over
ive run restore factory = no joy
i dont have a custom rom to flash using an update.zip and wasnt sure if firmwares came as update.zip i dont think they do.
I have to leave the house right now but will be back in 5 hours, please can someone post a solution for my problem!
thanks guys
you serious? no reply to this ???
sometimes it does needs a little bump to become visible again
you know the high volume of postings we get here, so don't be surprised if no one noticed after it moved to page 2 or beyond.
ClockworkMod Recovery have ROMs that will work with the update.zip
but only if you have the Full version of the ROM
if you created a backup before the skin changes with the ClockworkMod, then you can also restore that one.
Last resolt if you did not create any backup before getting... loopy... is to use Odin with any Firmware you choose.
yea i paniced and posted before i went to work, with no reply ive been doing some more researching over the last hour and pretty much figured that out. So hopefully ill be fine flashing a different firmware.
The best resource imo which i havent seen posted enough!
https://www.wuala.com/Samsung Galaxy S/?key=AfzUZSU4SpKU
just needs a couple more firmwares i think, you recon JM1 or JM2 ? guessing they are newer than JG5 , and JM1 was released over kies and was what i was using before.
I will use clockwork this time around! as i plan on making more graphical changes in the future, will be doing them myself this time tho!
well if you are going to be using custom ROMs in the end, then any Euro version of the i9000 ROMs will work for you, just to get you back on your feet, and then you can reload another custom ROM of your liking.
no i doubt i will be using custom roms, as i prefer installing things to my liking not someone elses. after reading the 19 page thread about the JM6 firmware, i think im going to stick with JM1 as its most highly rated and was officially released to UK through Kies so must be nice and stable
thanks for your replies yet again!
hey all gamer, im flashing a firmware i found, JM1
code, pda and csc are all XX, odin is stuck at File analysis, is it ok to disconnect USB and try again ?
i just got back, i was at the movies watchin The Expendables
yeah it's safe to abort, and reflash with Odin again, as long as your phone can go into the download mode via the 3 button key press

[Q] Bricked phone after JI6/Odin

Okay so, I used the Odin JI6 Froyo flash and everything went peachy. Also installed the OCLF and the Voodoo one from off the market.
Problem is that the root wasn't total/complete and the update.zip was replaced but could not be used in full rooting or something along those lines (I'm not certain).
Anyhow, the phone worked great for the last three days, then this evening the browser wasn't refreshing facebook so I restarted the phone. After the AT&T logo it went blank and it vibrated like a beating heart constantly before restarting again after about 5 minutes, which then made it beat like a heart again etc.
I tried going to the boot screen/safe mode and reinstalling the update.zip (which didn't work because of the failed root), tried clearing my data cache, and then also i formatted the sd card. Nothing.
After that I tried putting it into download mode and flashing Odin, which didn't work. It said it was sending the PIT files but stalled there and never changed. I tried a master clear and it didn't go anywhere either.
Any advice?
You should've read the forums more before flashing and saved yourself this headache. You will need this to flash back to stock.
use thishttp://forum.xda-developers.com/showthread.php?t=731989
Dowload Odin and the drivers on the first page of the thread. Install the drivers. Run Odin as Administrator. You need to then remove your SIM, battery and external sd card if you have one. Hopefully your button combo will work to get you into download mode. Next, put battery back in, hold the vol + & - buttons and plug in your USB from pc to phone and do not let go of the volume buttons, do not touch power and you should then enter download mode. Yellow screen with android shovelling. Odin should see your phone, push start on Odin and let Odin do it's thing. When Odin finished and your phone reboots you will be back on stock JF6. While your phone is powered on and on your homescreen master clear with Odin.
You need to read a bit before flashing anything again. One Click Root doesn't work with Froyo, neither does Voodoo. Had you taken some time and read you would know this.
Good Luck, I hope this helps.
ApplCobbler said:
Okay so, I used the Odin JI6 Froyo flash and everything went peachy. Also installed the OCLF and the Voodoo one from off the market.
Problem is that the root wasn't total/complete and the update.zip was replaced but could not be used in full rooting or something along those lines (I'm not certain).
Anyhow, the phone worked great for the last three days, then this evening the browser wasn't refreshing facebook so I restarted the phone. After the AT&T logo it went blank and it vibrated like a beating heart constantly before restarting again after about 5 minutes, which then made it beat like a heart again etc.
I tried going to the boot screen/safe mode and reinstalling the update.zip (which didn't work because of the failed root), tried clearing my data cache, and then also i formatted the sd card. Nothing.
After that I tried putting it into download mode and flashing Odin, which didn't work. It said it was sending the PIT files but stalled there and never changed. I tried a master clear and it didn't go anywhere either.
Any advice?
Click to expand...
Click to collapse
I feel your pain. Been there, done that. Although your process of bricking reminds me of a more sophisticated approach....lol....mine was out of total complete noobness.
Question:
1) Can you manually boot into download/ recovery manually using 3-button combo? If so you have hope (meaning your phone is basically "un-brickable").
-Bet that made you feel better huh?
-If you can't use 3-button to go into either modes, then you are in the same boat as i was. Hope you are still within your 30 days, or at least warranty. One way to tell if you can/ can't go into either modes is to check your "Batch #."
a) remove battery
b) look below your Serial Number
c) if your Batch # = 1007 = You are safe
d) Batch # = 1008 = good luck
2) When you say Brick, do you have the unfortunate "Phone (!) PC" screen? If yes, then its a "soft brick." If No, then its a "hard brick." I would start to worry.
3) According to your post, it sounds like you have the Regular Odin and NOT the One click version, correct? If you have regular Odin, i would at least try the One click. Regardless, both versions should be able to get you back to stock (JF6), but we already know how well your current version Odin has gotten you.
If you need help, there are TONS more knowledgeable people here in the Captivate forum than I. They should be able to help.
Good Luck!
1. Yes I can go into download and recovery mode. I've attempted to reinstall the 2.2 off odin but it doesn't take. It is the One Click Odin Froyo, it does not work. The Comm screen is yellow, and the logs just say it's loading the PIT and doesnt ever change from there.
2. I have seen that phone ! computer screen, but I'm not stuck at it. When that came on I held the vilume buttons and the power button and it went back to regular boot up (which obviously still doesn't work).
3. It is the one click. I'm not smart enough to use something that involves more than one click.
Stop trying to flash Froyo. Flash back to stock then master clear. Then go read the threads in the development section of the forum before flashing anything. The fact that you tried to apply Voodoo to Froyo and you tried to use one click lagfix on Froyo shows you haven't read and don't know what your doing. You corrupted something by flashing incompatable stuff, flash back to stock and master clear for now. Read a bit and then flash Froyo.
ApplCobbler said:
1. Yes I can go into download and recovery mode. I've attempted to reinstall the 2.2 off odin but it doesn't take. It is the One Click Odin Froyo, it does not work. The Comm screen is yellow, and the logs just say it's loading the PIT and doesnt ever change from there.
2. I have seen that phone ! computer screen, but I'm not stuck at it. When that came on I held the vilume buttons and the power button and it went back to regular boot up (which obviously still doesn't work).
3. It is the one click. I'm not smart enough to use something that involves more than one click.
Click to expand...
Click to collapse
LOL . I as well. I know enough to be dangerous.
Now, on to business. If you actually read what Rhiannon has posted for you, and click on the actual link itself, you will realize that the version of Odin you are using (yes the one click) is NOT the correct version for flashing back to stock (JF6/ Eclair.....NOT froyo). Remember, if all else fails....."The One must return to the Source...." <-----Plus 9,000 to whoever can guess where thats from.
Obviously your phone falls within the 1007 since you have the Luxury/ Advantage of manually entering Download/ Recovery mode....i wish i did.
Rhiannon224 said:
You should've read the forums more before flashing and saved yourself this headache. You will need this to flash back to stock.
use thishttp://forum.xda-developers.com/showthread.php?t=731989
Dowload Odin and the drivers on the first page of the thread. Install the drivers. Run Odin as Administrator. You need to then remove your SIM, battery and external sd card if you have one. Hopefully your button combo will work to get you into download mode. Next, put battery back in, hold the vol + & - buttons and plug in your USB from pc to phone and do not let go of the volume buttons, do not touch power and you should then enter download mode. Yellow screen with android shovelling. Odin should see your phone, push start on Odin and let Odin do it's thing. When Odin finished and your phone reboots you will be back on stock JF6. While your phone is powered on and on your homescreen master clear with Odin.
You need to read a bit before flashing anything again. One Click Root doesn't work with Froyo, neither does Voodoo. Had you taken some time and read you would know this.
Good Luck, I hope this helps.
Click to expand...
Click to collapse
Well Said!
Thanks Spartan, I'm guesing too much skimming and not enough reading.
OP when someone says flash back to stock they don't mean Froyo. I don't mean to sound harsh, really I want to help you, but you have to read and follow instructions when you ask for help or it becomes frustrating to all that try to help you. If you want to get out of the mess you are in read my original post and use the Odin thread I linked for you please.
Rhiannon224 said:
Thanks Spartan, I'm guesing too much skimming and not enough reading.
OP when someone says flash back to stock they don't mean Froyo. I don't mean to sound harsh, really I want to help you, but you have to read and follow instructions when you ask for help or it becomes frustrating to all that try to help you. If you want to get out of the mess you are in read my original post and use the Odin thread I linked for you please.
Click to expand...
Click to collapse
I see you are still on Cog 2.2 B5......dont care for 8 or any of the new ones? Or Sheps? What's your story?
Mine is simple....Patience. lol
I am on Cog beta 5.5 with 2e recovery kernel, I swapped the kernel myself before DG updated. It has working GPS and it is pretty zippy, I am not noticing lag. I was going to flash beta 8 last night but there were some modem issues and people losing 3g. Then 8.1 came out and I read the changelog and it isn't much different from my setup. I didn't go to beta 7 because Tw Launcher was removed and you need that for Kies to see your phone so that's a no go. Shep is using an I9000 kernel and I don't want to mess with I9000. I liike to flash my phone but I need to use it as a phone. I have tried some ROMS that I didn't think worked as well so I stick with what has worked best for me. I have all the mods on it, stock lock screen, battery circle mod, and gps works. I may try AOSP this weekend but I work all week not at a computer and I can't just flash all day. I find that things can go wrong and it takes time to reconfigure apps and contacts and if anything goes wrong it sould take a while to fix and I haven't had time to mess with it this week. I see you are still on 2.1, that is patience. I tried out Froyo and when gps worked for the first time ever since having the phone I'm sticking with Froyo. I am waiting for Voodoo to make ot to 2.2 then it will be perfect.
Also, I forget to edit my signature if i only try something for a day or two. I was on Froyo for a few before i remembered to change my sig.
Rhiannon224 said:
Thanks Spartan, I'm guesing too much skimming and not enough reading.
Click to expand...
Click to collapse
Alright, Jesus I get it, I didn't do my homework; repeating it over and over isn't going to help any more. Thank you for the info, I'm downloading the right Odin right now and I'll do the fixes you said.
Rhiannon224 said:
I am on Cog beta 5.5 with 2e recovery kernel, I swapped the kernel myself before DG updated. It has working GPS and it is pretty zippy, I am not noticing lag. I was going to flash beta 8 last night but there were some modem issues and people losing 3g. Then 8.1 came out and I read the changelog and it isn't much different from my setup. I didn't go to beta 7 because Tw Launcher was removed and you need that for Kies to see your phone so that's a no go. Shep is using an I9000 kernel and I don't want to mess with I9000. I liike to flash my phone but I need to use it as a phone. I have tried some ROMS that I didn't think worked as well so I stick with what has worked best for me. I have all the mods on it, stock lock screen, battery circle mod, and gps works. I may try AOSP this weekend but I work all week not at a computer and I can't just flash all day. I find that things can go wrong and it takes time to reconfigure apps and contacts and if anything goes wrong it sould take a while to fix and I haven't had time to mess with it this week. I see you are still on 2.1, that is patience. I tried out Froyo and when gps worked for the first time ever since having the phone I'm sticking with Froyo. I am waiting for Voodoo to make ot to 2.2 then it will be perfect.
Also, I forget to edit my signature if i only try something for a day or two. I was on Froyo for a few before i remembered to change my sig.
Click to expand...
Click to collapse
It's all good. I was just curious, that's all. As far as the 19000, that makes two of us. I tried it, hoping that the voodoo + OCLF combo would work.......WRONG! lol
When 7 came out and i too noticed the TW removed, i thought Everyone would take a plunge into that, since many have complained that TW i/o was just unbearable. Oh well. As far as everything else you mentioned, i feel the same way.
Edit: "I9000"
spartan062984 said:
It's all good. I was just curious, that's all. As far as the 19000, that makes two of us. I tried it, hoping that the voodoo + OCLF combo would work.......WRONG! lol
When 7 came out and i too noticed the TW removed, i thought Everyone would take a plunge into that, since many have complained that TW i/o was just unbearable. Oh well. As far as everything else you mentioned, i feel the same way.
Edit: "I9000"
Click to expand...
Click to collapse
I know you were curious, I figured I would just tell you my story. I froze Tw Launcher with TIBU for now, I've used Launcher Pro for months and didn't wanmt a second running in the backround, i will unfreeze it when I need it. Yeah, I try stuff anf when it doesn't work the way I need i go back to what works. I've been using DG's stuff since SRE and I update when it is a better package for my needs, so far his stuff works for my needs. I want Voodoo though, lol. Sory to hijack the thread, lol.
ApplCobbler said:
Alright, Jesus I get it, I didn't do my homework; repeating it over and over isn't going to help any more. Thank you for the info, I'm downloading the right Odin right now and I'll do the fixes you said.
Click to expand...
Click to collapse
Again, sorry if I sounded harsh, i am just trying to help you get out of the mess you're in. You can flash Froyo in the future you just need to learn about these ROMS and fixes so you don't have these kinds of headaches. I will stop repeating now. i really hope this works. I know your stressed and wasn't trying to give you a hard time, I just thought you were missing something and I am from NY and we are pushy Let us no if you get it working.
I have made some mistakes along the way too and it was because I didn't read the instructions clearly so I do understand how you felt.
Rhiannon224 said:
I know you were curious, I figured I would just tell you my story. I froze Tw Launcher with TIBU for now, I've used Launcher Pro for months and didn't wanmt a second running in the backround, i will unfreeze it when I need it. Yeah, I try stuff anf when it doesn't work the way I need i go back to what works. I've been using DG's stuff since SRE and I update when it is a better package for my needs, so far his stuff works for my needs. I want Voodoo though, lol. Sory to hijack the thread, lol.
Click to expand...
Click to collapse
""Sory to hijack the thread""
I started it. No worries. I too would love to have voodoo. So far, with stock OS, ext2 + OCLF seems to work for me....for now. Keep in mind that i too would like to have the functionality of a Phone. That was my intention in the first place...lol.

[Q] Rogers captivate 2.1 flashed to AT&T leaked 2.2

K heres the thing, a couple months back i couldnt wait for the 2.2 update. Not knowing what i was doing i flashed my perfectly good rogers 2.1 to at&t 2.2.
I then wanted to go back but found out i couldnt. For days was trying to flash back to stop and wasnt able to so i left it the way it is. I really started liking it except for i have the gps issue, im in my house and searching the gps and it tells my im like 20 blocks from my location:S lol
Anyways now what i wanted to do is if i got this problem i can atleast root it and have some fun. I tried rooting for the last 3 days but keeps saying its aborted. So now i wanna flash back to stock again and either root the 2.1 or update to rogers 2.2. What do u guys think i should do? im so stuck cuz also i dunno how to use odin. Do i need a specific odin to go back to stock??? i dont get it. Ive searched thousands of threads looking for this answer and when i finally found a good way to flash back all the links are broken aargggg ( Someone please help me out i would really appreciate it!!
After reading all these threads u guys are amazing..i wish i was that smart
Thanx guys!!
Zsolander said:
K heres the thing, a couple months back i couldnt wait for the 2.2 update. Not knowing what i was doing i flashed my perfectly good rogers 2.1 to at&t 2.2.
I then wanted to go back but found out i couldnt. For days was trying to flash back to stop and wasnt able to so i left it the way it is. I really started liking it except for i have the gps issue, im in my house and searching the gps and it tells my im like 20 blocks from my location:S lol
Anyways now what i wanted to do is if i got this problem i can atleast root it and have some fun. I tried rooting for the last 3 days but keeps saying its aborted. So now i wanna flash back to stock again and either root the 2.1 or update to rogers 2.2. What do u guys think i should do? im so stuck cuz also i dunno how to use odin. Do i need a specific odin to go back to stock??? i dont get it. Ive searched thousands of threads looking for this answer and when i finally found a good way to flash back all the links are broken aargggg ( Someone please help me out i would really appreciate it!!
After reading all these threads u guys are amazing..i wish i was that smart
Thanx guys!!
Click to expand...
Click to collapse
Use Odin 1-click from http://forum.xda-developers.com/showthread.php?t=731989
or use Odin Odin with the 3 button fix using http://forum.xda-developers.com/showthread.php?t=818439
Hope this helps
EDIT: For rooting, use this thread http://forum.xda-developers.com/showthread.php?t=909547
Thanx a lot ill give it a try later tonight ill let u know what happens
Sent from my SAMSUNG-SGH-I897 using XDA App

[Q] Galaxy S Problem...(S Logo Boot)

Hiya guys.
I've searched the forum as much as I can to try and solve my problems and it's got me so far but I can't find any more information to get my phone back working properly so though I'd bite the bullet and make a thread. If the information I require is actually lurking out there then I apologise just please point me in the right direction.
Here is my story.
Right I rooted my device through some video I followed on youtube (I cant post the link)
I think it successfully (as far as I know) rooted my SGS.
So with my newly rooted SGS I downloaded Darky's ROM and followed the instructions in the guide to flash it onto the device.
In the end it failed and the phone powered off and wouldn't power back on.
Panic Ensued.
I have since got my phone back into the download mode and flashed froyo 2.2 (I downloaded from some link on this site) it said it was successful but now it won't boot past the Samsung Galaxy S logo.
Please help?
Thanks alot in advance.
try to do a factory reset in recovery (sometimes it works)
and another thing, it may be that the froyo rom you downloaded was bad or something..
try to use this one with odin if the factory reset wont work. i know this one works.
Flash as PDA using Odin with repartition enabled and 512 pit
http://sourceforge.net/projects/teamhacksung/files/galaxys/GT-I9000_FROYO_FULL_PDA.tar/download
that one fixed my friend phone when something slimier happened to him.
Right thanks alot mate don't know what the hell happened but left it off and just turned it on and now it's working fine!
Scared me a little that I nearly bricked it but I really wanna try installing a new rom but don't wanna break it again :S
Just read the flash instructions and you won't have any problems.
Sent from hell to take your soul
When you flash it can take up to 10 minutes for the 1st boot, so go have a cup of tea and be patient!
Sent from my GT-I9000 using XDA Premium App
Ah right that was my first time so it might have just been me being impatient and thinking it wasn't working because it had been broken.
Also just wondering, the link I downloaded this Froyo ROM from (from another thread on here, can't find it now) is it custom or stock?
Heres some details...
Firmware version
2.2.1
Kernel version
2.6.32.9
[email protected]#36
The phone feels much snappier than before!
I'm new to all this ROM/flashing bees wax so just wondering.
Thanks muchly!
If its from some thread on here its custom some how some way (unless you just changed the kernel - which is speedmod - a very popular one - from your details.
G
Yeah it's off here from a thread I was reading on how to sort my phone being stuck in download mode.
Is it alot faster than the original rom I was running then?

[Q] official update doesn't work

Hi everyone
Thanks for everyone's support before. It gave some confidance.
It doesn't work though. It's starts updating and then reboot with the message "Update failed, try using Kies, or go to Samsung service centre".
I removed root it didn't help. I got CWD flashed. Could that be a problem.
Could I get rid if it just to be able to uodate?
Need some help here. Kies seems dodgy judging by the posts.
Thanks in advance.
You need stock recovery if you want to update the official way.
What do I do
Could you explain to me what to do please. And should I mess with Kies. Or it wouldn't work either?
Or may be I could just flash it with Odin? Do you know where I could get
the latest Honeycomb flashable file? Since I already have CWM. And everything from xda seems to work. I just thought mabe just ODIN that update if I could get it.
Stock recovery means that I would need to get rid of CWM. How could I do it please?
Surprisingly enough I managed to get back to stock recovery. The Guide in this forum is amazing. I was scared stiff since i never done it before. It went well but still the update doesn't work. No root. No CWM. Still stops and reboots.
Anyone any ideas please?
Exactly what are you trying to do? You want the latest stock rom? Yes, you can flash it with Odin, there's a guide for that also.
I think it worked. I flashed a stock recovery with Odin. And then updated with Kies. It went down rather well. I sleepless night and all that stress just to see that I liked HC 3.1 better. Especially the dock bar that I could swipe before. And now I have to hit a stupid mini triangle.
Anyway, learnt quite a lot. Used Odin for for the first time and CWM. Cool.
It crashed already twice. Could it be because of installing too mush stuff too quickly? I'm just too impatient to get it back on the road. Like over a 20 apps at the rate of 2 or 3 at a time. Or is it supposed to be able to take it and sth is wrong with the ROM?
Cheers
Nobody cares probably but I'd just like to thank everybody who replied to
my posts. Everything seems to work now. I think it's better. Ebook in the update rom reads French now. Which is handy. That's life, as far as the fact that I bought Moonreader goes. Google play did a wierd thing that I didn't ask for but It saved me about 5 hours. It just backed up, finaly that feature worked, 95% of my apps and then automaticly reinstalled them after a crash and a factory reset. So now I have to sort out the sleep debt.
Love this forum even more now.
Oh and the Guide is ****ing brilliant.

Categories

Resources