LCD touch function is out. Help - Tilt, TyTN II, MDA Vario III General

My kaiser lcd touch ability suddenly seized yesterday.
Tried flashing new rom, didnt solved the problem.
After some research, its was maybe because of motherboard, digitizers or lcd.
I going to buy the digitizer and lcd from ebay.
My questions are,
What do i need to change in order for the touchscreen to work again?
To buy lcd with digitizer or digitizer only?
Or the problem because of motherboard/ribbon flex issues?
im doubting this because everything apart from touch is working perfectly.
Thanks in advance!

no one can confirm me whats the problem?

i have same problem everything is working but alas touch screen is not functioning at all.. i dissembled my kaiser all looks fine but by searching a lot i think there is some fault with digitizer ..

owh alright. Digitizer is the culprit then.
ive just ordered new lcd plus digitizers for my Kaiser.
will update later.

Related

Broken LCD in UK

HI there.
I have searched through the forum looking at all the various solutions to fixing a broken LCD screen on the TyTn II. I unfortunately broke mine today however its just the LCD thats broken not the screen.
I was wondering if anyone knew of a reliable place to get the phone fixed in the UK or order replacement parts and Ill do it myself?
Is there a guide on how to do it yourself?
Finally, I had an HTC Vox before my TyTn II and its LCD broke as well...it makes me wonder of the integrety of the phone itself!
Thanks for any help in advanced!!
lawrence_craig said:
HI there.
I have searched through the forum looking at all the various solutions to fixing a broken LCD screen on the TyTn II. I unfortunately broke mine today however its just the LCD thats broken not the screen.
I was wondering if anyone knew of a reliable place to get the phone fixed in the UK or order replacement parts and Ill do it myself?
Is there a guide on how to do it yourself?
Finally, I had an HTC Vox before my TyTn II and its LCD broke as well...it makes me wonder of the integrety of the phone itself!
Thanks for any help in advanced!!
Click to expand...
Click to collapse
Try www.htclcd.com
all I can say is avoid gps midlands as this guy is a real waste of time and watch out for apex laptops as they tend to charge A LOT.
the best solution for You is insurance, mate... (unless You are confident enough to buy/replace screen Yourself)
think about it. if in doubts, pm for solution.
br
bro
I have found a service on eBay that looks quite good but need a recommendation. Not sure which one I need:
Replacement LCD Screen:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&Item=160228301787&Category=317&_trksid=p3907.m29
Replacement Touch Screen:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=160228303474
My phone, when I turn it on is mainly white with black lines near where I broke it. The glass screen itself is neither cracked or damaged. Do I need a new LCD or Touch Screen?
Thanks again.
consider PROPORTA
For £10, they send you a package to put your device in - give you a quote for the repairs and you don't have to go ahead with it.
Worth it just for the quote, IMHO.

Tocuh screen doesn't work

First of all, HI to every one, this forum is excellent and u are doing excellent job.
I have one problem,yesturday my htc tytn Ii felt down from half meter and from that time my touch screen is not working . screen is working fine but touch no ...what can i do? to open a case and see if conector is maybe disconected or ? is there need buying new lcd screen?
You can try opening it up and disconnect/reconnect the touch digitizer ribbon cable, if that doesn't work buy a new touch screen digitizer. They're fairly cheap.
so correct me if i'm wrong,there are two parts on the display? lcd screen and that touch screen digitizer??and digitizer is on top?
Yes, there's the LCD screen, then on top the digitizer.
the digitizer costs about 15 bux on ebay, and the lcd with the digitizer costs about 50. my touchscreen stopped responding awhile back, so i had to replace it. word of advice though. the digitizer is kinda build into the lcd, and it is a huge pain (atleast 4 me) to replace it. i ended up cracking my screen doing it, and had to but the whole lcd.
so your suggesting to buy entire lcd screen with digitizer on it?
You can get the lcd+ digitizer from yallstore for 35$ http://www.yallstore.com/htc-tilt-tytn-ii-att-8925-lcd-touch-screen-replacementt56-p-874.html
Which is exactly what i ordered on thursday after my screen cracked.
Replacing JUST the digitizer is quite tricky, i don't know if any of you guys have done it (i have) and it was pretty darn tricky if youve never taken fiddley things apart beware! the digitizer glass is glued on (around the edges) to the LCD, a sharp knife around the edge (the glass WILL crack) and a careful replacedment (i had to solder the ribbon cable on) should help there is a guide somewhere where someone has documented their attempt!
so can i be sure that my problem will be solved with new lcd screen?
please guys i need anwsers fast
zolmajstor said:
so can i be sure that my problem will be solved with new lcd screen?
Click to expand...
Click to collapse
Can you be certain this will fix it? No. It's about 99% likely, however. I don't know about you, but I pay alot more than $35/month just for my service. I haven't done the screen on my Kaiser, but I did on my Excalibur, which my son then inherited. To be honest, the Kaiser looks easier from what I've read.
it most probably isn't a software problem, so yes buy a new LCD+digitizer and replace both.

Urgent help with digitizer

I recently broke the screen of my Leo T8585 and replaced the LCD + Digitizer with an original Hong Kong part.
After disconecting the working shattered part the digitizer never worked again. Even the shattered one ceased to work completely (LCD is working fine but digitizer has no response). A second replacement part was ordered and the problem persists, ie, replacement part is not the problem. Also part number is correct.
Can anyone tell me if there is a specific precedure for this replacement? Could there be a hardware/software lock I need to open? Strip contacts have been checked and are fine.
thanks in advance
:O damn, a lot of people getting their HD2s smashed, here i was thinking i was the only one. I recently replaced my digitizer & LCD aswell.
As far as i know there is no soft/hardware locks present. In case you have checked that allll connectors are properly connected i can only guess that an electrostatic discharge might have caused damage to the hardware. . . But in case you were wearing an ESD wrist strap which i recommend using (by no means i don't want to sound like a smartass) i havn't got a faintest idea
Well.. replying to a totally old post but.. what the hell, maybe it will help and/or help others who encounter similar problems.

Broken Display!!!

My display is broken on Legend (just the amoled display, the digitizer screen is ok) some one can tell me where get a new one?
On ebay I found somes but the write that the dislay is a LCD not amoled, so someone can explain me? thanks for help!
Contact HTC and get a quote
You need lcd screen,not digitiser
http://cgi.ebay.co.uk/Original-LCD-...K_Replacement_Parts_Tools&hash=item1c1c324108
try here. i've ordered a cradle/charger last week from them. still haven't received it though. HTH
Thanks for all!!!
Confused
Sorry again, all link say that it's a LCD screen, but Legend have a AMOLED, so someone can explain me
Never thought of that! Mine was called LCD Screen off ebay and it works fine
bonesy said:
Never thought of that! Mine was called LCD Screen off ebay and it works fine
Click to expand...
Click to collapse
Thanks for your help bonesy!!!
Thanks for your help bonesy!!!..
I buy while ago display from ebay and replace it. Works like a charm. But there is still one problem. My digitizer never fits 100% on display and there is half mm space between housing and digitizer... I really don't know is that because of display or something else, just sharing my experience...
I bought on eBay and works great for me!

[Q] Help needed guys! Digitizer problems!

Hello guys have a problem with my htc vivid's(have 2 of them)!
To start the story with i got a cracked vivid phone from ebay and thought of replacing the screen, i also got a digitizer from some hong-kong seller, the screen arrived and i looked up some videos on youtube and fixed the screen myself, everything seemed to have gone fine, but when i switched on the phone after replacement the bottom half of the screen would not work! only the top hald of the screen worked, i assumed it was a faulty digitizer and ordered another digitizer!
Meanwhile i got another vivid off ebay, this was also a damaged one ( the seller told the LCD was dimming but digitizer was working) so i thought of replacing its LCD and got it off, this phone also arrived so i had one phone with bad digitizer and other with bad LCD i ordered an LCD also so b4 it arrives i thought i would change the digitizer from the bad LCD phone to the bad digitizer phone so i will have one complete working phone!
When i started to open the bad LCD phone i realised it was a water damaged phone, but the digitizer was fine so i removed its digitizer carefully and put onto the bad digitizer phone and switched it on, but again the same problem! top half woking bottom half not working! so i thought ill change the motherboard of the bad digitizer phone with the bad LCD phone and after doing that the digitizer would not work at all!!
i dunno what to do now i dunno where im going wrong any sort of help or duggestions would be greatly appreciated, and if you guys are having hard time understanding any part of the story let me know will try to explain that part as clearly as possible, thanks in advance! hope i get ou of this problem soon
Are you sure that both motherboards were in working order.? I would suspect the motherboard you installed is faulty...is that motherboard the one which was on the waterdamaged phone? If it were me I would put the motherboard back in that at least had the screen half on and then troubleshoot from there....I've replaced a few screens but not enough to give a good resolution...I would proceed by process of elimination on components you know, for sure, are working before you install them...and its totally plausable that a new replacement part can be faulty...I'm not sure man, just my two cents worth...I would scour xda for others who have had screen issues..one post probably won't fix your particular issue but a few different ones might...ill look too and post link if I find something...
Sent from my HTC One X using xda premium

Categories

Resources