Related
I just flashed a battery mod on my galaxy s.
But i think i downloaded the Wrong one!!! When i did a reboot, the process 'android.phone' stopped working. Mmmm.. OK.
Tried a factory reset through the 3 button menu. Well now it does not do anything, i can see the boot movie, but then i get a Black screen with an heartbeat on the vibration thingy.
I did not panic and tried to flash an other firmware. Well it did not work. I see the boot movie, but then the screen blacks out and nothing works......
I searched for this, but i didnt get a good answer on how to solve this.
So if anyone is kind enough to help me, and tell me what to do in simple steps.
The same here. I used version D for JP6 & the 2nd method.
I had to reflash the softwear.
Exact same problem with me, had to reflash. Could someone tell the guy who has the battery mod thread?
Sent from my GT-I9000 using XDA App
Antonyjeweet said:
I just flashed a battery mod on my galaxy s.
But i think i downloaded the Wrong one!!! When i did a reboot, the process 'android.phone' stopped working. Mmmm.. OK.
Tried a factory reset through the 3 button menu. Well now it does not do anything, i can see the boot movie, but then i get a Black screen with an heartbeat on the vibration thingy.
I did not panic and tried to flash an other firmware. Well it did not work. I see the boot movie, but then the screen blacks out and nothing works......
I searched for this, but i didnt get a good answer on how to solve this.
So if anyone is kind enough to help me, and tell me what to do in simple steps.
Click to expand...
Click to collapse
1st. You need to flash a fresh firmware I suggest a official one so you can download the latest JP6 from kies without knifing the registry. you can get those firmwares from http://www.samfirmware.com/WEBPROTECT-i9000.htm but you need to register first. And here are the intructions how to flash http://samsunggalaxysforums.com/sho...and-and-flash-newer-firmware-to-your-Galaxy-S
2nd. After a succesfull flash go to recoverymode (shut down device, hold: vol-up, home and power)
wipe cache and do a factory reset just incase, and boot your device.
3rd. Install JP6 through Kies
edit:
BTW im a noob who did just this after i messed my phone to a state like mentioned in op So i dont take any responsibility about any damage you do to your phone. I did something like this and now i have official JP6 inside my sgs and its flying
Hi guys,
I think I possibly screwed up my wounderful sgs i9000 european edition
First of all I have to tell you how I came to this...
A long long time ago, today afternoon 17 o'clock european time I wanted to test the great CM7 and so I did, of course first I failed to flash it but then it worked. The phone worked fine but there came the point when I wanted to use samsung's firmware again, cause it has the apps I love.
So I just connected my phone with Odin and tried to flash a original Firmware, I think it was JS7. It worked, but then my phone didnt boot after the flash.
So I managed to make the phone boot into download mode, what is the only thing that works at the moment.
So I connected it again and tried to flash my phone one more time but then it didnt work
Odin stuck at the line "set pit-file" or somethin like that.
Well. What could I do? Reconnect and try to reflash and it doesnt work again
Do you know, guys, what I could do? I need my phone every day but atm it cant be flashed
Now I tried to reflash it again and I stuck at the line "SetupConnection.."
Maybe I should try to flash another kernel and try to flash a custom rom trough CWM? Maybe that would be the key for me?
My phone stuck at "SetupConnection.." since 10 minutes or so
PLS help me
best regards,
alex
is recovery mode working ?? if so do a full factory reset.
Get your self a firmware with all 3 files and PIT. something old like JM8 or even back to eclair.. This should contain the dbdata which ive had trouble with in the past.
When you have all that, connect your phone to odin and try again, Make sure kies IS NOT running (even in the icon tray) and make sure your drivers are upto date.
If download mode works, your phone will survive. As for Odin sticking on 'Setup Connection' That's something to do with the phone connecting to the PC.. Maybe try another USB port, or like mentioned previously, Kies running or out of date drivers ????
Anyway try the above steps. and post back your results.
Oh dont forget to make sure RE-PARTITION is CHECKED when your using Odin.
well, thank you very much for the useful information
at first I tried to flash my phone at my laptop, then on a pc, but it just didnt work
but now I 'm succefully flashing it again trough my laptop and hopefully it will work again
And yeah, DL Mode works fine, but nothing other
Well, seems to be that my phone just was flashed succefully
Damn, I was so scared that I have to return the phone to the reseller
Wonderful, it boots again
I wont take it easy as before with the flashing.
Sorry for the trouble created by me
And thanks again
gn8 (from my time zone) and best regards
alex
closed
Hi All,
I was try to change the stock animation on Infinitum when after restarting I wasn't abble to sign in. There was a msg saying something baout "Report" "Ok"..." Settings.
I shut down the SGS and made a nandroid restore, the device restarted but it shows the Samsung logo blinking evry six seconds and a can't go to recovery anymore only downloading.
What should I do?
Thank you all in advance.
what program did you use to root your phone?
broncosfan007 said:
what program did you use to root your phone?
Click to expand...
Click to collapse
I think was "OneClick Root"...
I'm trying to find .tar files to recover using Odin but I can't find... Old SGS + Froyo + Portuguese TMN (carrier)... Any help would be apreciated.
Heeeeeelpppp
Now things are getting very strange. I got the original firmware and flashed the Galaxy S with Odin. All went well without errors. But now, when restarting, the device makes the carrier original sound and is swapping between the carrier logo and galaxy logo, endlessly....
I can use the pseudo-CWM menu with the options Install from sdcard, Wipe Factory and Wipe.
Any help or idea to follow?
(I love this mobile )
Definitus said:
Now things are getting very strange. I got the original firmware and flashed the Galaxy S with Odin. All went well without errors. But now, when restarting, the device makes the carrier original sound and is swapping between the carrier logo and galaxy logo, endlessly....
I can use the pseudo-CWM menu with the options Install from sdcard, Wipe Factory and Wipe.
Any help or idea to follow?
(I love this mobile )
Click to expand...
Click to collapse
Hmm..when i screw something up with my SGS, I just go download, and make myself a stock ginger trough ODIN.
Try the steps for installing andy 2.3 as a preperation for CM7
so my brother brought me his semi bricked n7000 "btw i searched and googled"
well, yesterday my brother brought me his cellphone which doesn't boot anymore, he wanned to install a custom rom since he saw that i have a fast one (galaxy s I)
so when i asked him what he did , he said he followed all the steps in rootgalaxynoteDOTcom/galaxy-note-roms/kingdroid-ics-rom-v3-0-for-galaxy-note-gt-n7000-best-ics-romtouchwiz-ux/[/url]
but then, his phone didn't boot, so he wiped - reset factory setting, which i read is a BIG NO when you're flashing ICS.
so whats done is done, i am trying to get it back , i can boot in recovery mode/download mode ... i tried out many kernels like AbyssNotekernel42RedTouchCustomLogo or speedmod, and downloaded at least 4 or 5 GB stock roms.
sadly , if odin flash is successful, it stuck on (samsung galaxy note gt-n7000) black srcreen, reboots few times then stays still...
if the odin flash wasn't successful , it keeps stuck on data.img and never goes beyond that .
i did all the steps i could find, wiped data after installed stock GB rom and rebooted, nothing worked
i even used rogue_ET-recoveryonly , and i think it went along format all the way, but still nothing happened after that.
the only thing i haven't tried yet was the repartition + pit file, i couldn't find the PIT , most of the roms have pda/modem/csc ... so if anyone can help out, i would really appreciate it ..
thanks
First thing you should do is check other threads about that around here.
If you can get it into download mode, you could give flashing with Odin a try. If it doesn't get stuck at factory.fs, then you're not superbricked.
If it does get stuck, then you have 2 more hopes:
- HOPE 1
- HOPE 2
If those don't work either...I'm afraid it's off to the Samsung Service center for a shiny new motherboard.
Best of luck to you and hope you get your Note up and running as soon as possible...
thanks, no it doesn't get stuck at factoryfs at all , i did check out most of the threads here, and most of them say "go back to GB with odin and if its stuck on samsung gt-n7000 boot screen just go back with recovery mode and then wipe data / cache " but never worked, so i thought i should ask around here
i'll check out the threads you posted and see what i can come up with
weird, i used the 16gb pit - repartition (check)
and i flashed it with SGN_XX_OXA_KJ1_FACTORYFS through odin.
and its still the same, the flashing with odin was successful and everything went fine, no hanging , no delays or what so ever. after it restarts its stuck on the black samsung galaxy note gt-n7000 screen
im gonna wipe data / cache again but i doubt that would fix anything.
so any idea what could be wrong? specially when the flashing process went fine?
i've already tried like 4 stock roms ,
arabic uae , europe , saudia and the SGN_XX_OXA_KJ1_FACTORYFS
i wonder if i need to put something in boot space in odin "just a thought"
ive tried downloading roms from here [STOCK ROMS] N7000 All stock ROMs + install + Root guide All at 1place,Latest ICS LQ3
and here [STOCK ODEX PRE ROOTED ROMs] for Odin PC no counter & triangle
any ideas?
For OP:
If you are not stucking while flashing from PC Odin then you are not superbricked.
I think you got corrupted /system or other partition; I saw another thread where OP was getting this sort of hang due to filesystem corruption which can't mount.
Entropy512 gave simple dd command based solution for erasing initial 1MB of partition.
Try searching for corrupted filesystem/partition related information. I can't recall exact thread title, sorry.
I hope this will help.
I found the post/thread for you to check: http://forum.xda-developers.com/showpost.php?p=27102526&postcount=16
thanks for the reply , even think i flashed the abyss and the 4pda_kernel i still can't get anything when i do adb devices >.>
so im trying to figure out whats wrong
johar123 said:
thanks for the reply , even think i flashed the abyss and the 4pda_kernel i still can't get anything when i do adb devices >.>
so im trying to figure out whats wrong
Click to expand...
Click to collapse
Should try to install/reinstall samsung usb driver package. or try reinstall Kies also provide drivers for Note.
If driver is install properly: when connect with PC using usb cable it need to be shown under hardware management as something like "android composite adb interface" or something like that.
johar123 said:
thanks for the reply , even think i flashed the abyss and the 4pda_kernel i still can't get anything when i do adb devices >.>
so im trying to figure out whats wrong
Click to expand...
Click to collapse
Also are you trying to connect adb after booting the phone ? Means in a stuck state ? I think you can try enabling ADB thing from CWM rather than trying to boot phone fully.
hmm i can't find an option in CWM that suggests that , still searching
also im trying to find roms that i can install from CWM , are there any GB roms that can be directly installed from CWM ?
thanks.
johar123 said:
hmm i can't find an option in CWM that suggests that , still searching
also im trying to find roms that i can install from CWM , are there any GB roms that can be directly installed from CWM ?
thanks.
Click to expand...
Click to collapse
Hi: I understand he means boot the phone into CWM and then connect to PC in that environment. adb need to be run from PC while the phone is booted into CWM recovery.
Still, most of the custom roms are in the .zip format and can be install using CWM. they just now become a bit more difficult to find since dev move on to ICS/CM9 roms. Still try to find some GB roms in the forum such as: rocket GB, litening GB, xtralite GB....
This is the link for Rocket rom GB. Better try v22 than v23.
http://forum.xda-developers.com/showthread.php?t=1380284
Check rom:
http://download.checkrom.com/roms/a...oteHD_V3.zip?iframe=true&width=950&height=420
cheers,
forest1971 said:
Should try to install/reinstall samsung usb driver package. or try reinstall Kies also provide drivers for Note.
If driver is install properly: when connect with PC using usb cable it need to be shown under hardware management as something like "android composite adb interface" or something like that.
Click to expand...
Click to collapse
done that already.. everyone is saying is "get into recovery mode" >.>
johar123 said:
done that already.. everyone is saying is "get into recovery mode" >.>
Click to expand...
Click to collapse
Yes, recovery mode is in CWM. (in case you have not done it: Enter recovery by,from phone power off: pressing volumeup + home + power and release power when see samsung letter while still hole the other two buttons.)
forest1971 said:
Hi: I understand he means boot the phone into CWM and then connect to PC in that environment. adb need to be run from PC while the phone is booted into CWM recovery.
Still, most of the custom roms are in the .zip format and can be install using CWM. they just now become a bit more difficult to find since dev move on to ICS/CM9 roms. Still try to find some GB roms in the forum such as: rocket GB, litening GB, xtralite GB....
cheers,
Click to expand...
Click to collapse
thanks for the reply, i've done it many times, when im in the CWM screen, the adb devices still doesn't show anything >.> maybe im using a wrong kernel? what kernel you guys suggest?
johar123 said:
thanks for the reply, i've done it many times, when im in the CWM screen, the adb devices still doesn't show anything >.> maybe im using a wrong kernel? what kernel you guys suggest?
Click to expand...
Click to collapse
hmm. that should be still the problem with usb driver. Have you checked under hardware management if it show the device as "samsung composite adb interface" yet?
kernel should not be the problem with connecting adb. It is the problem with usb driver for Note. Sometime Win7 have problem with driver. You may want to search for another package of samsung usb driver on the web.
I did put some links of GB roms in the post in the previous page. maybe try them first if any luck.
Also try to restart computer to see if the driver issues get solved.
Got to go. Hope that you can solve the problem. GL.
forest1971 said:
hmm. that should be still the problem with usb driver. Have you checked under hardware management if it show the device as "samsung composite adb interface" yet?
kernel should not be the problem with connecting adb. It is the problem with usb driver for Note. Sometime Win7 have problem with driver. You may want to search for another package of samsung usb driver on the web.
GL.
Click to expand...
Click to collapse
thanks, i restarted my pc , reinstalled kies, and now it shows under device manager
now i connect to the phone through adb , i appreciate you pointing it out
which method you think i should go for 1st? this one
http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
or unzipping a rom and then pushing it all through adb?
i think i'll go for removing and repartitioning manually, hopefully it'll work
thanks again guys , i'll post the updates here,
lol, my brother called me and he's like "if u can't fix it by the end of the night, fk it, dont bother yourself with it" but to be honest, im too stubborn, i hope i can fix it
looks like deleting and adding partitions back through parted kinda work, for the first time i was able to pass the boot screen after i installed rocketrom from CWM
however, its been 1/2 hour since im stuck on rocketrom loading screen it keeps looping and looping.. i wonder if i should wait more.. or should i try another rom?
finally got rid of the verification -.- was kinda annoying thats why i didn't bother editing posts,
anyways, rocketrom didn't work, so i decided to flash a stock rom instead , the flash through odin went fine, it was great to be able to wipe data without getting stuck , however, it keeps going though samsung animation over and over, i think im gonna leave it like this one the charger till morning, i wonder if it'll be the same
guess i have to google for "samsung loop" , i wonder why this keeps happening though -.-
-.- leaving it for 6 hours on samsung logo animation didn't do the trick , still looping when i woke up, so i guess i'll do some more search on why this is happening.
You have checked partitions and see no error that means the problem lies somewhere else, not partitions. I have no idea yet, but for me I would try some different roms. Small roms have more chance to work, that is the feedback I got from some people:
- try check rom in the link I sent
- try paranoid android which is CM9, or asylum
- extralite
cheers.
forest1971 said:
You have checked partitions and see no error that means the problem lies somewhere else, not partitions. I have no idea yet, but for me I would try some different roms. Small roms have more chance to work, that is the feedback I got from some people:
- try check rom in the link I sent
- try paranoid android which is CM9, or asylum
- extralite
cheers.
Click to expand...
Click to collapse
thanks buddy, i appreciate your help, the partition "USED" to give me error when i did the check 9 10 11 , but after removing the partition and reformatting them (and i also removed the cache partition) now its working fine "i suppose" i didn't do another check, but i might will now that you mention it.
i already tried rocket rom, didn't work, stock rom didn't work, so i'll give the others a try at least it doesn't get stuck on the boot screen, but its stuck on the animation logo which is an improvement
thanks again
My wife was gonna install the latest update (Lollipop) today and her phone was encrypted and so she decrypted it to prepare it for installation. At 85% the phone said that it failed and that she had to do a factory reset and so she did but now it seems the bootloader or something messed up. I've tried flashing it with Odin and with the PIT file but with no success. I could really use some help here buddies...
I attached some pictures of what I see when I try to flash it in Odin and what it looks like in recovery.
Any help will be greatly appreciated!
Juan123 said:
My wife was gonna install the latest update (Lollipop) today and her phone was encrypted and so she decrypted it to prepare it for installation. At 85% the phone said that it failed and that she had to do a factory reset and so she did but now it seems the bootloader or something messed up. I've tried flashing it with Odin and with the PIT file but with no success. I could really use some help here buddies...
I attached some pictures of what I see when I try to flash it in Odin and what it looks like in recovery.
Any help will be greatly appreciated!
Click to expand...
Click to collapse
You tried flashing the boot loader thru Odin am I right? Did you try flashing the whole Firmware thru Odin? Did you put the phone on Download mode? Remember to take the battery out then boot to download mode by pressing and holding volume down+home+power button for about 3 seconds then let them go, phone will boot into Download mode, the connect your phone to pc, then Open Odin, make sure the Odin :COM is on light blue meaning they are both communicating, then go to www.sammobile.com and download the latest firmware for your device model, and follow the instructions, it have to work, but your phone will be restored to factory, good luck, cheers:fingers-crossed:
yoniinfante said:
You tried flashing the boot loader thru Odin am I right? Did you try flashing the whole Firmware thru Odin? Did you put the phone on Download mode? Remember to take the battery out then boot to download mode by pressing and holding volume down+home+power button for about 3 seconds then let them go, phone will boot into Download mode, the connect your phone to pc, then Open Odin, make sure the Odin :COM is on light blue meaning they are both communicating, then go to www.sammobile.com and download the latest firmware for your device model, and follow the instructions, it have to work, but your phone will be restored to factory, good luck, cheers:fingers-crossed:
Click to expand...
Click to collapse
Hey there friend (thanks for replying),
I tried pretty much all of what you wrote and it just says failed. I have not tried to flash the bootloader thru Odin only the firmware that I got off of sammobile... I'm at a loss not sure what to do I've never seen this before.
Juan123 said:
Hey there friend (thanks for replying),
I tried pretty much all of what you wrote and it just says failed. I have not tried to flash the bootloader thru Odin only the firmware that I got off of sammobile... I'm at a loss not sure what to do I've never seen this before.
Click to expand...
Click to collapse
Are you sure you checked everything? try from a scratch, make sure you download the firmware for your device model, a lot of users get confuse with the bunch of letters after N910... also try a different Odin like 3.09, remember to check what I told you before in Odin, also if you wanna give a try, try flashing an old kitkat firmware, all we need is to boot your phone, good cheers:fingers-crossed:
If you think I helped you in anything please Press the Thanks Button, I will appreciate it too, Thanks:highfive:
yoniinfante said:
Are you sure you checked everything? try from a scratch, make sure you download the firmware for your device model, a lot of users get confuse with the bunch of letters after N910... also try a different Odin like 3.09, remember to check what I told you before in Odin, also if you wanna give a try, try flashing an old kitkat firmware, all we need is to boot your phone, good cheers:fingers-crossed:
If you think I helped you in anything please Press the Thanks Button, I will appreciate it too, Thanks:highfive:
Click to expand...
Click to collapse
Same results "flash read error" not sure what's going on. Am still reading around on the Internet. Thanks.
Juan123 said:
Same results "flash read error" not sure what's going on. Am still reading around on the Internet. Thanks.
Click to expand...
Click to collapse
Hey just to let u know I was reading too about ur problem, this is what I found, you gonna uninstall Samsung drivers from ur pc, under control panel, and reinstall them, or let windows search for the drivers it will install them too, after you do all that, try again flashing via Odin, remember to follow all the steps, good luck, cheers:fingers-crossed:
yoniinfante said:
Hey just to let u know I was reading too about ur problem, this is what I found, you gonna uninstall Samsung drivers from ur pc, under control panel, and reinstall them, or let windows search for the drivers it will install them too, after you do all that, try again flashing via Odin, remember to follow all the steps, good luck, cheers:fingers-crossed:
Click to expand...
Click to collapse
Tried it. Thanks for your helps so far. I'm beat I've been at it all day. Gonna give it a go again tomorrow. Thanks again man.
It may be stupid question but did you flash 3 files ROM or just one file (PDA if I remember well)? If it was second option, then you shouldn't use PIT.
slowik515 said:
It may be stupid question but did you flash 3 files ROM or just one file (PDA if I remember well)? If it was second option, then you shouldn't use PIT.
Click to expand...
Click to collapse
Just one file via AP in Odin.
Why don't you just download KIES and run recovery through that it is much more simple and reliable
Yousef_Muslih said:
Why don't you just download KIES and run recovery through that it is much more simple and reliable
Click to expand...
Click to collapse
Kies doesn't register it... it just says connecting. I tried to kies 3 and 2.6 just to make sure.
It sounds like the issue is with your USB cable maybe try a different USB port preferred in the back of the system not one upfront. Make sure you have mock locations and USB debugging on. The only reason keys wouldn't detect your device is if the drivers are incorrect
There's a feature "Reactivation Lock" in security settings. Make sure it is unchecked. It is a security feature to prevent anyone from changing your system Rom.
Sent from my SM-N910G