Related
Hi guys,
Im thinking of flasing a custom rom using odin.
Im running stock froyo 2.2.
PDA: I9000XWJPA
PHONE: I9000XXJPP
CSC: I9000XEEJP4
My phone is rooted and lag fixed. I understand that i need to remove the lag fix before and flash.
I updated to this using the registry hack. My questions are as follows...
1) Can i flash a custom rom from stock 2.2 or do i need to firstly flash a kernal with recovery 2e and then flash a custom rom?
2) Am i right in thinking that the PDA is the right bit to be looking at i.e when people say this rom is usable with JPA / JPO etc. The phone and CSC are not important when flashing a custom rom ( but still needed obviously )
3) If by some miracle of god we ever do get 2.3 and i flash back to stock Froyo via odin using a rom from samfirmware.com, will kies recognise my phone? Or will i forever be destined to flash "unofficially" through odin.
4) Looking at the PDA etc given above can anybody recommend a good rom to flash with gingerbread theme and apps. ( i keep seeing Darky's rom popping up in conversations ) and also have a link to it if you would be so kind. Im not lazy but theres so many roms all over i want to make sure i get the right one.
5) Once i have recovery 2e can i flash future roms over the top using rom mananger by clockworkmods and not have to go through odin? Or how does that work?
If i could get some clear answers to the above that would be great.
Yes i am a newbie at this but i am confident that i understand the basics, its just a couple of things above that i want clearing up before i proceed.
I know how to use odin correctly. ( close kies first / make sure odin opened before plugging in phone etc. )
P.S Yes i have 3 button recovery and download mode.
Thank you for taking the time to read this and a big thank you to any body that takes the time to respond with help.
Any body that can help?
dude i feel your pain. i've rooted and installed custom roms on two other phones, most recent the HTC Desire Z. and it was quite a nightmare to just start off to know what the first step is, there are soo many different guides its hard to know which is what and what has now been superceeded by something else!
now i'm trying to get a custom rom on my galaxy S too, but really having a hard time understanding everything becuase guides and stuff are so different for different roms, gets confusing and dont know which one is for me!
my phone is already rooted, i have firmware 2.1-update1, i know i have voodoo lagfix somewhere installed. but my base band version is I9000XXJM4, which i hav'nt seen in any guide! where did you get your seperate PDA, PHONE, CSC info from?
sorry i could'nt help you and i justed added a bunch more questions to mix
also how did you manage to get Clockwork Recovery on your phone? i have recovery 2e atm. i downloaded Rom manager from the market and tried installing Clockwork rewcovery, but first it would not even download. then i tried next day and it downloaded it through rom manager. but i dont think it installed it. i went into recovery mode and then it tried to auto-install clockwork recovery in recovery mode! but it just hanged at zero status bar for like 20 mins. i turned the phone off and on, went back into recovery mode and it was still recovery 2e, how do i get clockwork recovery to flash as the recovery mode?
Type *#1234#into your dial pad and it will come up. If I'm right I believe that 2.1 is more simple to flash over than 2.2 which is the bit that's confusing me.
I believe that you would need to flash a new kernel with recovery 2e and then flash a new Rom over the top.
I'm a but confused though as to weather or not I would need to flash back to 2.1 and then do a couple more flashes to get the job done.
Can some one please clear this up.
Sent from my GT-I9000 using XDA App
1. You don't need to have 2.1 rom to flash, since you'll be able to do all the flashing using Odin and download mode. Just flash a kernel, using odin, that has clockworkmod integrated, and you'll be able to flash most roms and kernels with the clockworkmod.
Speemod kernel is a great kernel, and has clockworkmod included.
Link: http://forum.xda-developers.com/showthread.php?t=822756
2. PDA is the rom part. CSC is important when using stock roms. I think that custom roms have CSC included in them.
3. You'll always be able to flash with Kies by using the Kies Registry Hack or by flashing a stock rom through odin. Kies will recognise your phone even if you are on a custom rom, but I'm not sure if it'll flash your phone.
4. I prefer Docs Ultra Slim roms because it's light, and you can customize them however you want. Darky's rom is a good option if you want all the features of a stock rom, and more. I use a Gingerbread theme with Doc's rom.
Links,
Darky's: http://forum.xda-developers.com/showthread.php?t=814091
Doc's: http://forum.xda-developers.com/showthread.php?t=817703
Both can be installed through ClockWorkMod
5. I think I answered this already.
Thank you for clearing that up. Very helpful but unfortunately you now raised another question haha.
You said that I would always be able to flash through kies using the registry hack... but wasn't that disabled so the registry hack wouldn't work any more a couple of versions back on. 803 or whatever it is?
And you also said that kies would recognise my phone but might not flash it which if I'm reading it right.contradicts.what you said about always been able to flash through kies.
Thank you so much for previous post it was very helpful.
Sorry if I sound stupid for.asking so many questions but I want to make sure I have covered all the angles before I proceed.
Again thanks for taking the time to help.
Sent from my GT-I9000 using XDA App
By registry hack, I really meant the Kies Registry Patcher app found here: http://forum.xda-developers.com/showthread.php?t=835628
Works on all Kies versions at least for now.
Like the original registry hack, this using this app makes Kies think that you have a stock rom and as long as Kies thinks that you have a stock rom, it will flash your phone.
In the sentence where I said that Kies will recognise your phone but won't flash, I mean't that it wouldn't flash without the Registry Patcher.
Thank you sooooooo much for your help dude.
Sent from my GT-I9000 using XDA App
Hello,
i've got a serious problem with my galaxy S.
Recently i updated my software of my SGS to 2.2.1 with kies. I was happy for a little while but then i saw darky's rom and i wanted also the Gingerbread look on my phone. I rooted my 2.2.1 using Odin and i installed Clockwork recovery Mod or something like it. After that i flashed Darky's rom on my phone.
It all worked perfectly. But then Yesterday suddenly when i tried to call home my phone wasnt working like it should. And it wouldnt call anybody.
So at home i searched up a stock firmware from samfirmware .com And i flashed it.
Now my phone is all **** because the software force closes and kies doenst work any more. I think i may should have first deinstalled Clockwork mod and unroot?
The only thing i want is to get back to 2.2 or 2.1 Im running vodafone and im from holland don't know if that makes a difference?
Anyways i really hope someone on this forum can help me please.
I just need the stock firmware and everything else like CWM and root of my phone although i cant see superusers anymore in my menu so i think its off?
first of all boot into recovery. do a factory reset/ wipe the cache and also try to format the internal sd card.
secondly boot into download mode and try to flash your stock rom again, do not use re-partition or pit unless you have 3 files (pda, modem, csc), if that completes, let me know what happens after the flash... or PM me if you want to.
Just to add, if you have these problems, you should flash with repartition to make sure that everything will be fixed, but as azzledazzle said, you need all the 3 files to do that.
you knw what a problem is i think ..that i'm not sure im using the right rom to flash with? could you maybe tell me what file i need to flash with? what is the stock for my phone and how can i see it?
http://forum.xda-developers.com/showthread.php?t=846913 this has all the stock firmwares you need. im not sure which ones come in 3 files. ideally you will be wanting one that also has dbdata... if you cant find it i would suggest flashing darkyys new 9.2
you can flash that thru odin, you can use 512 pit even tho it only has 1 pda file. and it also contains dbdata which will restore the old one incase of corruption or deletion (happened to me yesterday)
when i try to format the sd it says .
E:can't mound /dev/block/mmcblk0p1
(device or resource busy)
E:copy_dbdata_media: can't mount SDCARD:
do i need to do anything about this? is it bad?
i would try and flash a rom with dbdata if that doesnt work you could try this http://forum.xda-developers.com/showthread.php?t=905975 or this http://forum.xda-developers.com/showthread.php?t=563298
if that doesnt work i think it may need to go back to samsung i suspect it could be a corrupt sd card... (but i may be wrong)
yes yes YESSS i think it worked really thanks man for the fast help etc. now it boots i flashed it and there are no weird apps or force closes...Only one question left if i want to just root 2.2.1 is there an easy app for it? or do u have a file to just root stock with odin?
airdude13 said:
Hello,
i've got a serious problem with my galaxy S.
Recently i updated my software of my SGS to 2.2.1 with kies. I was happy for a little while but then i saw darky's rom and i wanted also the Gingerbread look on my phone. I rooted my 2.2.1 using Odin and i installed Clockwork recovery Mod or something like it. After that i flashed Darky's rom on my phone.
It all worked perfectly. But then Yesterday suddenly when i tried to call home my phone wasnt working like it should. And it wouldnt call anybody.
So at home i searched up a stock firmware from samfirmware .com And i flashed it.
Now my phone is all **** because the software force closes and kies doenst work any more. I think i may should have first deinstalled Clockwork mod and unroot?
The only thing i want is to get back to 2.2 or 2.1 Im running vodafone and im from holland don't know if that makes a difference?
Anyways i really hope someone on this forum can help me please.
I just need the stock firmware and everything else like CWM and root of my phone although i cant see superusers anymore in my menu so i think its off?
Click to expand...
Click to collapse
It's funny.. I did the exact same thing yesterday, and the same result happened to me. Now I'm dealing with how to unbrick my phone.
easiest way is to flash speedmod kernel thru odin, that gives you root and lagfix (if desired) also some extra tweaks to speed up the phone.
PS: Dont forget the thanks button ---------------------------------------------->>>>>
well maybe this can be some use to u it worked for me i guess only prob is i cannot connect to kies but that's just finding the right firmware
damn man it still is not the right firmware how can i see what firmware i need? the one i got now kies still says it cant update
damn man i still dont have the right firmware how can i see what firmware i need for my phone? its a dutch vodafone branded phone i want 2.2
http://forum.xda-developers.com/showthread.php?t=846913
select the firmware you want from there. dont listen to what kies tells you.
Firstly, apologies if this is already posts elsewhere, but I have tried looking for this with no joy (there's aloooot of threads n here lol)
I recently upgraded to the leaked official 2.3.3 using odin (sbl version).
However, I would like to flash with stock software now to get the official upgrade on my Galaxy S via Kies.
Can someone please help or point me to a guide on doing this and where i can download the correct version. I assume its not as straightforward as simply downloading a stock version of Froyo and flashing as I did to upgrade.
My Current phone version is showing as PDA:JVK / PHONE: JVK / CSC:JVK (CPW)
I should point out that this is the first time ive flashed software on my phone, so ideally a step by step guide, if there is one out there
Thanks for any advice you can give
Ok first of all what you need to do is download an older firmware, preferably in 3 files.
Look here: www.samfirmware.com (you need to register, free)
or look here: http://forum.xda-developers.com/showthread.php?t=846913
when you have your selected firmware, you need to download a software called 'Odin', this is what we use to flash firmwares to our devices. Look here for a tutorial http://forum.xda-developers.com/showthread.php?t=723596
when you have 'Odin' and your 'Firmware' you may also need a 'PIT' file, this is explained in the above link. This will re-partition the device and restore the 'bad blocks' and remove any lagfix / altered file-systems ect ect.....
Because you are on Gingerbread at the moment, its possible that you have changed your boot loader, in order to restore this back to Froyo bootloader, i think the firmware you will need is JM1 ( you may need to search here / google for the correct answer)
anyway when the whole process is completed, you should be able to connect to KIES and flash the latest release.
Any problems just write back. im sure we can help get you going !!
azzledazzle said:
Ok first of all what you need to do is download an older firmware, preferably in 3 files.
Look here: www.samfirmware.com (you need to register, free)
or look here: http://forum.xda-developers.com/showthread.php?t=846913
when you have your selected firmware, you need to download a software called 'Odin', this is what we use to flash firmwares to our devices. Look here for a tutorial http://forum.xda-developers.com/showthread.php?t=723596
when you have 'Odin' and your 'Firmware' you may also need a 'PIT' file, this is explained in the above link. This will re-partition the device and restore the 'bad blocks' and remove any lagfix / altered file-systems ect ect.....
Because you are on Gingerbread at the moment, its possible that you have changed your boot loader, in order to restore this back to Froyo bootloader, i think the firmware you will need is JM1 ( you may need to search here / google for the correct answer)
anyway when the whole process is completed, you should be able to connect to KIES and flash the latest release.
Any problems just write back. im sure we can help get you going !!
Click to expand...
Click to collapse
I think that JM1 is eclair...
froyo works with the gingerbread bootloaders so you should just be able to flash a froyo rom i THINK.
Hi im also wanting to do the same looking at the samfirmware files would JS8 be ok to flash?
neoian1277 said:
Hi im also wanting to do the same looking at the samfirmware files would JS8 be ok to flash?
Click to expand...
Click to collapse
Any froyo ROM is fine as long as it contains the bootloaders as gingerbread ROMs have different ones.
Download your ROM. Check inside the PDA (sometimes code) tar. If you can't see by clicking on it find instructions how to untar it.
There should be a boot.bin and an sbl.bin if there is you're good to go. If not flash another one that has.
You can always reflash with your preferred froyo ROM after the initial flash has downgraded the bootloaders
This link tells you all you need to know about flashing with Odin.
http://samsunggalaxysforums.com/showthread.php/2921-How-to-use-Odin-to-upgrade-to-Froyo-from-Eclair
Sent from my GT-I9000 using XDA App
Ok, I tried flashing using the JPY firmware. The process seemed to go okay.
But only getting the 'S' logo for ages then the phone starts ocaasional quick vibrations and screen eventually goes black.
Have tried rebooting ans reseting.
Please help
First boot after a flash does take a long time and you may get the odd little vibration. The screen may go black for a little while. Be patient. If nothing happens after six or seven minutes pull battery try again. If still no good reflash.
You did check repartition in Odin? And use. 512 pit? You need the pit file for a reflash.
Maybe md5 your firmware to check you didn't get a corrupted download.
If you can still get download mode don't worry you will be able to sort it. Most people on xda brick their phones most weeks!
Sent from my GT-I9000 using XDA App
well i reflashed the 2.3.3 leaked and its working for now, will try again tomorrow, getting a bit late.
Was wondering about whether I should try the JM1 instead of JPY. But, on the Sammyfirmware website they only had XW***JP1 which I understand is not for UK/Europe (mine is XX)?
But thanks everyone for your help so far, i may be back on in tears tomorrow
You can use any firmware - they were released with different codes in different regions but if you use a multi CsC like the one in the jpy ROM it doesn't matter because its the csc file that does the regional settings not the PDA file
Sent from my GT-I9000 using XDA App
Hmmm well showing on Samsungs FB page that the ginerbread update has been pulled (by Google)
Guess i'm sticking with the leaked version for now
Sorry to muscle in on this thread but I'm trying to go back from GB 2.3.3 to Froyo 2.2.1. I've flashed JPY with Odin, used repartition, 512 pit and registry patch 1.82 to XEU, phone works fine. Well, Kies then recognises that there is a new firmware (JPY as it happens) and starts the upgrade process, I then get an error message saying that this version can't be updated
Any ideas??
MTIA
maybe you will find some info in this post.....
http://forum.xda-developers.com/showthread.php?t=1044534
Anybody tell me what is lagfix and why it is used for?
and why different kernels are used
Galaxy S XWJVB
richard2311 said:
maybe you will find some info in this post.....
http://forum.xda-developers.com/showthread.php?t=1044534
Click to expand...
Click to collapse
We now have two threads on the same subject but as this was started first I'll continue with this one.
Thanks for the suggestion, I flashed JPU but unable to connect to Kies so flashed the 1 file JPY but still got the same error message with Kies. Maybe I'll try reinstalling Kies and see what happens.
OK, I've reinstalled Kies, changed the product code in the phone with *#272*IMEI# to XEU and now Kies tells me that I have the latest firmware - great bring on the official version of GB.
can anyone give me a link of jpy firmware with bootloader?
the ones from samfirmare.com are WITHOUT bootloader...
Okay, seems that Samsung have finally released Gingerbread.....again. So am gonna make another attempt at downgrading to Froyo so I can get the official Gingerbread update.
However, because of the issues I had with my last attempt, I would like to make sure I am doing it correct.
Current Phone Software
Model: GT-I9000
Firmware Ver: 2.3.3
Baseband Ver: I9000XXJVK
Kernal Ver: 2.3.35.7-I9000XXJVK-CL75655 [email protected] #2
Build Number: GINGERBREAD.XXJVK
I believe the version I installed included the bootloader
The phone was purchased in the UK on T-Mobile but supplied through Carphone Warehouse
Steps:
Downloaded: I9000XXJPY (single file) & 512.pit from Samfirmware (does this contain bootloader? If not, will it cause an issue in updating on Kies?)
Remove sim & memory card
Start phone in Download mode
Plug in USB
Open Odin v1.3
Select .tar file as PDA
Select 512.pit file
Re-Partition - Not Ticked
Auto Reboot & F.Reset Time - Ticked
Click Start
Wait for installation to complete and phone to restart
Hopefully i've provided all the info required, but if not, please post or PM me. If anyone could please check my steps above and let me know if i'm doing this correct or not before I go ahead.
Much appreciated
hi there,
as i know, to run a 2.3.3 rom on SGS , we need to flash a new bootloader right?
but what if i wanna roll back to 2.2.1? do i need to do somthing to re-install a bootloader for 2.2.1?
cuz in most tutor of installing a 2.2.1 rom did mention DO NOT touch the "Phone Bootloader Update" option of odin3
thanks.
I have found a method to downgrade successfully and created a new post with the step by step guide
http://forum.xda-developers.com/showthread.php?t=1100906
Sent from my GT-I9000 using Tapatalk
Please help!!! I have searched and searched and searched the forums and have come across so many threads on how to add a custom rom to your Captivate.
To start, what I have been trying to do is add a custom rom after upgrading my phone from ver 2.2 to 2.3.3 GB. Some posts say you can just upgrade with the 2.3 on the phone, other posts say you need to take the phone back to the stock 2.1 rom. Then you find posts that say, make sure you have the stock bootloaders and kernals when you downgrade to the stock 2.1.
You can easily see how even a somewhat above novice can get confussed. To take my phone back to 2.1 I have followed posts that say use Odin 1.3. I have used odin before so no big deal. However in this case again you are getting different opionions and versions on this. Some have just the odin .exe and others have the .exe and the MD5 and .ini it the package. I am assuming that the one with just the .exe has everything built in as the size is quite big.
I have tried both ways and after I "Flash" it will not finish with the normal recovery mode and see the linux script. It will go to the ATT window and just keep rebooting over and over. I then will use my JIG and get back in download mode in order to reflash back to 2.3.3 just to get the phone to work again.
Can someone please give me a clue as to what I am doing wrong or direct me to the proper files and maybe some better step by step instructions.
Thanks in advance for the help.
What Rom is currently on you phone? Which Bootloaders do you have installed?
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro
Rhiannon224 said:
What Rom is currently on you phone? Which Bootloaders do you have installed?
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro
Click to expand...
Click to collapse
Here is the info:
Firmware: 2.3.3
Baseband: I897UCKF1
Kernel: 2.6.35.7-I897UCKF1-CL273832
Build: GIGERBREAD.UCKF1
^ From the looks of what u posted, it looks like u have the leaked i897uckf1 currently on ur phone. If that is the case, then u could Odin the Cognition Beta 2 Kernel and then flash the latest Cog Rom (having already copied it to ur internal sd).
Just flash the kernel through Odin then use button combo (volume +/- and power...release after u see the at&t screen) to get into CWM 4.0.0.5 and flash Cog 5 v 1.00 from there.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Are you plugging into a usb port in the back of your pc? Also, there are several methods for flashing back to stock now, once you upgrade to GB bootloaders you don’t ever want to use the Odin with the button fix because it will only flash the secondary bootloader and the primary bootloader will remain GB and the result will be a hardbrick. Also, some of the newer builds came with Froyo installed and using the older 1 click Odin by DesignGears will put those devices in a bootloop. So it really is dependent on your device and your needs. I now use the method outlined in the Continuum 6.1 thread which will not touch the bootloaders and brings you safely back to 2.1 stock. I always clear user data and cache in recovery, flash back to stock using Cezar's method (not a 1 click) prior to flashing a new Rom. Most devs recommend flashing to stock first because there is less chance of corruption.
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro
http://www.youtube.com/watch?v=UOyx5JQ_8_I
MobileTechVideos video is how i flashed my first gingerbread ROM. Its easy, straight forward and he has all the links you will need under the video.
piece-a-cake
Gupone said:
Please help!!! I have searched and searched and searched the forums and have come across so many threads on how to add a custom rom to your Captivate.
To start, what I have been trying to do is add a custom rom after upgrading my phone from ver 2.2 to 2.3.3 GB. Some posts say you can just upgrade with the 2.3 on the phone, other posts say you need to take the phone back to the stock 2.1 rom. Then you find posts that say, make sure you have the stock bootloaders and kernals when you downgrade to the stock 2.1.
You can easily see how even a somewhat above novice can get confussed. To take my phone back to 2.1 I have followed posts that say use Odin 1.3. I have used odin before so no big deal. However in this case again you are getting different opionions and versions on this. Some have just the odin .exe and others have the .exe and the MD5 and .ini it the package. I am assuming that the one with just the .exe has everything built in as the size is quite big.
I have tried both ways and after I "Flash" it will not finish with the normal recovery mode and see the linux script. It will go to the ATT window and just keep rebooting over and over. I then will use my JIG and get back in download mode in order to reflash back to 2.3.3 just to get the phone to work again.
Can someone please give me a clue as to what I am doing wrong or direct me to the proper files and maybe some better step by step instructions.
Thanks in advance for the help.
Click to expand...
Click to collapse
Listen, I'm new at this and learned watchin mobiletech videos from youtube. At first I found it hard but now is pretty easy (in my opinion). The first thin I do is back up apps with titanium and paste to my laptop (for me is faster to install them back), go back to stock 2.2, master reset using dialer (no odin), root, reboot, install rom on sd card, using odin i install bootloaders (I9000), flash talon kernel (odin), flash rom (CWM) and reboot. That's how I do it. Now, I could b wrong but doing it that way, in that pattern works for me. Like I said, I'm new at this but trust me....I've done it several times and it works for me. Keep reading and then decide how you want to do it. Good luck..."HONESTLY"!!!
It all depends on where you are now and where you want to go.
Sent from my SGH-I897 using XDA App
I'm new to all of this and have done a good amount of research but seems like the information never ends and there are a few ways to load a custom rom.
Method one
BACK UP!!!
Flash to stock (FTS)
Wait for your phone to reboot and then re-enable debugging
Hook phone back up to pc and Master Clear (MC) using Odin
Load Clockwork update.zip (DOWNLOAD)
Load FireFly_X-X.zip to phone memory
Remove sim and external SD, and unplug USB
Boot into recovery and reinstall packages (You may have to reinstall packages twice to get to Clockwork recovery)
Once in Clockwork recovery (Green Text), select install zip from SDcard
Next select choose zip from sdcard
Scroll down to FireFly_X-X.zip and select the file
This will run the script and install the ROM to your phone
After this is done, select go back and then select reboot phone
This may take a while, so leave your phone and go grab a snack!
Method 2
Load ROM file onto phone
Boot into recovery
Select ROM and flash it
Reboot, wait and enjoy
Wash, rinse, repeat!
What are the differences? Which one is better?
Seems like the first video is very simple and straight forward?
Am I missing something here? I'm already rooted and used titanium backup.
I'm on 2.2 Froyo and wanting to flash to Firefly 3.0
Thanks!
Hi,
I'm trying to upgrade my firmware through Kies, as I've just connected and it's alerted me that I am now able to upgrade to PDA:JVN / PHONE:JV1 / CSC:JV5(OPS). I am currently on PDA:JP5 / PHONE:JP3 / CSC:JP4(OPS), but when I click on the upgrade, it will pop up with a window that looks like it's downloading the firmware, but they disappears as quickly as it appeared, and my phone then needs to re-connect to kies...
This appears to be an infinite loop, without ever really getting anyway. My phone is rooted if that matters, and I don't think I have any lag fixes applied? I know I have applied lag fixes before, but I think I've since flashed with the stock 2.2 firmware, so there shouldn't be any lag fixes going on... :/..
Does anyone know what I'm doing wrong or how I can better debug this problem?
Thanks in advance
Denno
denno020 said:
Does anyone know what I'm doing wrong
Click to expand...
Click to collapse
Using Kies, may be
If you have the 3 buttons combo, prefer Odin...
Kies is Satan Tool, its a big cup of ....
if u want do upgrade use just and only ODIN
Thanks for the replies..
I would much prefer to use ODIN too, however I don't want to loose my installed apps and how I've got my home screens set up etc, so this is why I was trying to use Kies. I'm not familiar enough with ODIN to know if there is a way I can use it to upgrade without losing installed apps and home screen layouts etc??
Thanks
Denno
Well i think if u backup ur apps then u can save them otherwise i dnt think they remain on ur phone while using the odin is simple.
just go to www.samfirmware.com make an account and chk the firmware sec in toolbox and then select ur model and download the latest formware...JVR is the latest firmware on samfirmware download it and download odin extract that downloaded folder and u have 4 file 1 pit file 2 code 3 csc 4 modem.
Now open odin and put these file respectively ( dnt forget to close kies if u have even from running services on windows) now put ur phone in download mode and connect through odin and tick the repartition on leftside and then start odin...
Of all goes well u r on stock GB
wait phone to phone to boot
now choose any kernel to root ur phone and again turnoff ur phone and get in download mode and choose that kernel in pda option of odin and this time unchk the repartition and start odin
now ur rooted
Sent from my GT-I9000 using XDA App
thanks for the reply Ali Khalid... I'm looking on samfirmware, but I'm not able to find the Gingerbread firmware version for Australia? I downloaded I9000XWJVN ## under the 'America Australia Samsung I9000 Firmwares' heading, but that only had a tar file, with a heap of files I didn't recognize..
Any chance you could give me some more direct help? Like exactly which one I should download for Australia? Looking at the country letter code, which is DT for Aus, they only have firmwares for 2.1 and 2.2...
I'm really lost with this upgrading thing :/..
Can someone please help? I need to know which firmware I should download from samfirmware for an Australian I9000...
Thanks
denno020 said:
Can someone please help? I need to know which firmware I should download from samfirmware for an Australian I9000...
Thanks
Click to expand...
Click to collapse
Is there a specific reason you need Australian version? You can flash any firmware you wish.
Sent from my GT-I9000 using XDA App
There isn't a specific reason... I thought I would have to go with the Australian one to be sure that calls and stuff can connect to my phone through the network correctly? I'm completely lost with all this stuff to be honest...
If I don't have to get a specific Aussie one, which one should I download? As I mentioned earlier, I downloaded one called I9000XWJVN ## but it didn't have the pda files and pit files as expected.. they were all different things :/..
Im running JVS 2.3.5 (with JVR modem) I haven't bothered to flash an Australian/Optus csc but i guess you can if you wish. I did have to add APNs but that is no big deal.
After that you might want to flash a non-stock kernel for root, lagfix etc. I am running semaphore 1.7 and stock+ theming for extended power menu, %battery crt off etc.
Keep in mind if you are going down this route you will be voiding any warranty you have but ask anyone here it is worth it to make the most of your phone.
Do some reading around the forum and ask any questions you need so you know what you are doing.
Sent from my GT-I9000 using XDA App
Thankyou for your reply Mrlwik, but it's gone totally over my head. I really don't understand any of that.. I have flashed stuff to my phone before, but it was easy because I already had the 3 required files, and there was a step by step..
I guess I could just pop over to the custom roms sub-forum and download one from there and give it a go again..
Do I need to get a special modem or csc file or something to make sure it'll still work with Optus?
denno020 said:
Thankyou for your reply Mrlwik, but it's gone totally over my head. I really don't understand any of that.. I have flashed stuff to my phone before, but it was easy because I already had the 3 required files, and there was a step by step..
I guess I could just pop over to the custom roms sub-forum and download one from there and give it a go again..
Do I need to get a special modem or csc file or something to make sure it'll still work with Optus?
Click to expand...
Click to collapse
Sorry I was really confused once too, I will do my best to break it down a little.
You don't need a specific modem for Optus although different modems will give different results depending on your location regarding signal, 3g, gps and battery (due to signal strength) its quick and easy to change modem and this can be done anytime (through CWM recovery) without any data loss.
CSC is a bit different, although you can use a CSC that is different to your location/carrier it basically denotes any specific apps and APNs. CSC can be changed with odin but will factory reset you phone and you will lose data.
-APN details can be found with a quick Google search and can be added no problem through settings>wireless and network>mobile network>access point and as I don't care for carrier specific apps (apart from "my account" but the .apk for that easy to find) I haven't bothered to change it. Others do find it important.
I know the stock 2.3.5 JVS from samfirmware will contain the 3 files (code, modem, csc) and the .pit file for flashing because it is what i flashed.
Or alternitavely there are a few custom roms that can be flashed through odin regardless of what firmware and bootloaders you are currently running.
Some firmwares/ROM only have one file and it can be flashed under PDA. There are guides for flashing on samfirmware(for stock), here and video guides on YouTube. Always stick to the guide.
Decide what direction you want to take (stock with non-stock kernel or custom rom) and read up on some of the topics in the general section about flashing and/or any topics relating to any ROM you want to flash.
Once you know what you want to do with your phone it will mean much less reading for you and others will be able to help you more as you will know what questions to ask.
There is lots of info here, its just a matter of knowing what info you need and how to find it.
Hope that helped a little..
Sent from my GT-I9000 using XDA App
denno020 said:
Thanks for the replies..
I would much prefer to use ODIN too, however I don't want to loose my installed apps and how I've got my home screens set up etc, so this is why I was trying to use Kies. I'm not familiar enough with ODIN to know if there is a way I can use it to upgrade without losing installed apps and home screen layouts etc??
Thanks
Denno
Click to expand...
Click to collapse
If you phone is rooted download titanium backup and backup all apps before flashing, then install it again after flashing and restore only apps.
Wow thankyou so much for that breakdown Mrlwik! That does actually help a little! I'm going to find a stock firmware from samfirmware instead of a custom rom.. But it's great to know that I can swap modems to try and find the one that best suits my needs, as I do have problems with reception in my house, so maybe a new modem could fix that?
Anyways, thankyou again, and great effort and writing all of that with your phone! It definitely helped
Well I finally took the plunge and flashed my phone. I used the JVS firmware, which worked seamlessly. Then I wasn't sure if I were still rooted or not.. so I downloaded Dark Core (or something), and flashed that in PDA using ODIN. Then I was definitely sure I was rooted . Now I've just got to figure out a 'lag fix', my quadrant score at the moment is ~1400, but I reckon I can get much better, so I'll try some overclocking apps from the market I think, see which works best for me.
The most painful thing is restoring all my apps using Titanium Backup.. I have to click install for everyone of them, it doesn't automate it, which is so very annoying, but I'll get there eventually :/... lol
Thanks for all your help Mrlwik, very greatly appreciated
I had a similar problem with KIES in South Africa.
I don't use KIES any longer, it doesn't even have the "connect to internet" option.
Since you've rooted your device, I'm sure you have Clockworkmod flashed...if not, flash that using Odin. After that, you can flash any ROM, custom or stock, using clockworkmod recovery, then you don't require Odin again...just copy the ROM or apps you want to flash to your phone, boot into recovery, flash, and restart. Can't be easier than that.
ali_khalid5518 said:
Well i think if u backup ur apps then u can save them otherwise i dnt think they remain on ur phone while using the odin is simple.
just go to www.samfirmware.com make an account and chk the firmware sec in toolbox and then select ur model and download the latest formware...JVR is the latest firmware on samfirmware download it and download odin extract that downloaded folder and u have 4 file 1 pit file 2 code 3 csc 4 modem.
Now open odin and put these file respectively ( dnt forget to close kies if u have even from running services on windows) now put ur phone in download mode and connect through odin and tick the repartition on leftside and then start odin...
Of all goes well u r on stock GB
wait phone to phone to boot
now choose any kernel to root ur phone and again turnoff ur phone and get in download mode and choose that kernel in pda option of odin and this time unchk the repartition and start odin
now ur rooted
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
My question is, will this wipe out the device? I want to upgrade and keep my information and apps on my phone.