So... I installed custom ROM and now I want to hard reset X1...
I came to dialog where it says to press [R] key to reset or [X] key to cancel, but my keyboard doesn't work on that screen My keyboard usually works (its new, clean etc.) but when it says to press R key to hard reset it just stops working
Anyone with idea, same problem?!
Please help!
Thx
_______________
I started new ROM without hard reseting... Now I can see that when I pull out keyboard, screen freezes and it looks like nothing is working but when I return keyboard all things that I have written appear...
Anyone had this problem? Is it hardware problem or?
lozatheker said:
So... I installed custom ROM and now I want to hard reset X1...
I came to dialog where it says to press [R] key to reset or [X] key to cancel, but my keyboard doesn't work on that screen My keyboard usually works (its new, clean etc.) but when it says to press R key to hard reset it just stops working
Anyone with idea, same problem?!
Please help!
Thx
_______________
I started new ROM without hard reseting... Now I can see that when I pull out keyboard, screen freezes and it looks like nothing is working but when I return keyboard all things that I have written appear...
Anyone had this problem? Is it hardware problem or?
Click to expand...
Click to collapse
try to run hard reset when keyboard is open, maybe it work then ;-)
I tried everything...
Something is broken... Stupid keyboard didn't last a month... Everytime when I slide open keyboard screen freezes and unfreezes when i close it...
X1 great mobile phone with HUGE MINUS on keyboard
Related
Hi guys,
Great forum, unfortunately i can't find a solution for my problem. Here is my problem: I installed Diamond TF3D Config on my phone and i tweaked a couple of things, everything went well untill i changed the TouchFlow menus.
It automatically restarts, but the loading process can't pass the HTC logo screen and now it says:
" The Device is unable to boot because either you turned of the device incorrectly...----- Press SEND to reset your device..."
Well, ofcourse I followed the instructions and pressed SEND, but it looks like it doesn't do anything at all. The error screen above keeps displaying, without anything telling me that something is being done about the problem. Is it doing something or is it just stuck? (The light is continously on).
Can you guys help me? By the way I tried the manual hard reset, but that didn't help.
did you hard or just soft reset?
well i did a soft reset, that didn't work out keep getting that screen.
and I tried a hard reset but that wasn't possible, because i couldn't get in the device, so it pretended it was a soft reset..
but do you know if it is doing something or not , cause i get the screen continously with the lights on
PM the developer... sushilange... and then post the solution here for us all to take benefit of.
Not sure of your full situation, but two options that may help; hard reset, or connecting phone to pc and try running an RUU install; of course all data will be lost, device could be as well.
---- Hard Reset Option ----
To perform a hard reset:
1. Press and hold both softkeys on the device (the little dots above ok, and windows key). Keep these keys pressed, and at the same time, use the stylus to lightly press and hold the RESET button on the bottom of your device.
NOTE: I had no idea which of the many keys were considered the soft keys. They are the two buttons above the phone control buttons.
2. Release the stylus but keep the softkeys pressed when you see the following message on your device screen:
“Do you want to erase all user data and restore to manufacture default?”
3. Slide open the hardware keyboard, and press R to restore to factory default or press X to exit the hard reset process.
Note:
Your device will be set back to factory default settings. Please ensure any additional installed programs and user data have been backed up before a hard reset is performed
--- RUU install ROM --- (this is for the mogul, you'll have to find your own, just reading material)
http://www.htcamerica.net/support/mogul/software-downloads.html
k I will. And this guy has the necessary knowledge?
bjason6 , thanx for your help
but I don;t understand.
hardware keyboard, a diamond doesnt have a keyboard or do you mean something else and where are the two soft buttons i cant seem to find them
This is the proper way to hard reset the Diamond (taken from the wiki):
Switch the device off. Press and hold the "Volume Down Key" and "Action Button" (round button), at the same time, use the stylus to press the red RESET button in the stylus silo. You will be presented with a menu saying 'press R to reset, X to exit'. If you press R, your device will be set back to factory default settings.
Hard Reset will delete all data you have put on the device: Programs, Settings, Mail, SMS, MMS, etc., so be careful and make a backup before doing this.
After a hard reset, you will have a complete clean new install of Windows Mobile on your device.
I thought the phone must be on for the hard reset to work, because I doesnt work on y phone
and oh, the SEND button is just the phone button right? the one beneath the House-button?
Yes, bottom left "phone" button is send
YiuW said:
and oh, the SEND button is just the phone button right? the one beneath the House-button?
Click to expand...
Click to collapse
Nice
Now your tekin the pee mate
YiuW said:
k I will. And this guy has the necessary knowledge?
Click to expand...
Click to collapse
Well he wrote the app, so I bloody hope so
damn what the hell is wrong with my phone man damn...
YiuW said:
damn what the hell is wrong with my phone man damn...
Click to expand...
Click to collapse
LMFAO..... RTFM.... dunno
Anyone suggestions to solve this problem??
It doesn't seem that I can acces my phone via usb
Can you enter bootloader? WIKI
yeah i can
What can i do with the boat loader then?
YiuW said:
What can i do with the boat loader then?
Click to expand...
Click to collapse
Sail away ?
hi
i have a strange problem in my diamond.
when i start teeter the ball stays always on the same place. i move the phone in every direction and the ball doesn't move.
in other applications i rotate the diamond and the image don't rotate or rotate to the wrong side.
i've tried g-sen calibrator but didn't get any results. does anyone have a idea to help me please)
Sounds like the G-sensor isn't working, may have to do a hard reset.
is there anything else i can do?
Yes, send it for repair.
Your choice.
If the above advice don't work, you'll still have to send it for repair though.
i'm using the official rom 1.93 pt
how can i do the hard reset?
Darkzell said:
i'm using the official rom 1.93 pt
how can i do the hard reset?
Click to expand...
Click to collapse
Read the Manual or use the Search feature of the forum.
teeter problem..
try to delete the line with teeter setting from Gsen config...
1. flash another rom
2. hard reset and flash another rom
3. send it for repairs
hard reset,
press the reset button with your stylus stick while holding volumedown button and centre pad button for more than 3 secs.
1.) I changed new rom
2.)It freezes when i was using youtube panel
3.)I turned off and when i turn on again wont load
4.) I tried hard reset , taking out the battery and memory card still wont load
5.) couldn't connect to pc
anyone know how to fix ?
well i had the same issue few moments ago. but now i get rid of it by using a very easy method.
- While the phone is off -hold down the front left and right buttons on the X1 and insert your stylus into the soft reset hole all at the same time.
- After i did this i was presented with a blue screen that told me to press R to reset and delete all my existing stuff. Then i had to callibrate the stylus and the same stuff the day you got it.
I tried that way too, after it said restart i pressed spacebar to restart and its still stuck at loading screen...
you press R... not space
poetryrocksalot said:
you press R... not space
Click to expand...
Click to collapse
R to hard reset, SPACE to restart.
If the phone has finished its hard reset (it's telling you to press SPACE) and you can't just remove the battery and turn the phone on. Maybe your keyboard is dirty and it's not reading the SPA.CEBAR presses
OT: hey poetry, where'd you been? did you sell your X1?
Sorry for my bad english , but it did restarted after pressing the spacebar but it still freezes for some reason and ive done like 5`6 hard reseting it ;/
harveydent said:
R to hard reset, SPACE to restart.
If the phone has finished its hard reset (it's telling you to press SPACE) and you can't just remove the battery and turn the phone on. Maybe your keyboard is dirty and it's not reading the SPA.CEBAR presses
OT: hey poetry, where'd you been? did you sell your X1?
Click to expand...
Click to collapse
yes I sold my X1. I wanted to try out the Nokia E90, and my X1 was in such a bad shape that I had to sell it before it lost value.
i know this is old post, but i have that problem now, any solution.
i changed my rom 20x till now but now stack on XPERIA logo, soft reset hard reset not working, any help....
solved. entered boot loader, three color screen, run task 29 utility 8-12 times, every time connected disconnected usb cable, removed inserted battery and then suddenly update progres was shown on phone. huh. flashing my X1 was easy till today. Good luck to all...
Hi guys,
After some applications being removed, my X1 was kind dead and I just did a hard reset. After reset everything looked fine though some software I need to re-install. However, I could not find out the small keyboard icon at bottom centre when I pointed to a text area to type. I was trying to use the hard keyboard but don't know how to type underscore "_", If anyone could help that will be great.
Thanks in advance.
Brian
maybe second hard reset will solve problem...
hard reset with soft keys method:
1. turn off device
2. press both - left right soft keys (silver keys under screen)
3. while pressing soft keys press power button to turn on device
4. keep holding and don't release soft keys until blue text with white background appears.
5. slide out keyboard press "R"
6. wait a little and press SPACE when asked.
hope, it'll solve problem. if will not, try reflashing ROM again.
thanks ork.
I will give a try and let you know if it works.
what file are still have after hard reset?
how about the panel??
how about the game??
how about the ringtone?
how about sbp mobile shell?
how about tf3d??
I recently face a keyboard issue that anytime i insert several emoji on Whatsapp or write a text, send it and press the home button or back button, the keyboard doesnt go away and stays at the screen for like 60 seconds, which doesnt let me use the other stuff like if i returned to the home screen i lose the bottom half untill the keyboard finally goes away. I already tried factory reset, reinstall Xperia Keyboard's updates and none of them didn't work. But other keyboards like SwiftKey doesnt do this. Could anyone help me about this situation? I will be very glad if i find anyone who can fix this
Coras said:
I recently face a keyboard issue that anytime i insert several emoji on Whatsapp or write a text, send it and press the home button or back button, the keyboard doesnt go away and stays at the screen for like 60 seconds, which doesnt let me use the other stuff like if i returned to the home screen i lose the bottom half untill the keyboard finally goes away. I already tried factory reset, reinstall Xperia Keyboard's updates and none of them didn't work. But other keyboards like SwiftKey doesnt do this. Could anyone help me about this situation? I will be very glad if i find anyone who can fix this
Click to expand...
Click to collapse
U can try to clean installation of ftf...