[Q] Download Mode Won't Work! - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi,
Badly need help. After flashing JM8 with CSC of JM2 using Odin, phone is stuck in boot up with the following error message:
Update media, please wait...
E: Can't mount /dev/block/st110
(Invalid Argument)
E:copy_dbdata_media: Can't mount DBDATA:
copy default media content failed.
This is the 2nd time I'm flashing my phone and during the first time I had the same error...Please help??

do a full flash of JM8 or JM2 don't mix and match CSC some are not compatible

Related

[Q] Stuck on Reboot

Need help flashed jm8 through Odin, used correct files and have tried with repartition checked and unchecked.
On reboot just get:
E: Cant mount /dev/block/st110
(Invalid Argument)
E:copy_dbdata_media: cant mount DBDATA
copy default media content failed.
When I reboot it turns turns on to the s screen and then goes off again, any advice please?

[Q] What is this? ERROR Message on Recovery Screen!

Hi,
I got this this msg on recovery:
E:Can't mount /dev/block/stl11
(Invalid argument)
upadate media, please wait...
upadate media, finished
# MANUAL MODE #
--Appling Multi-CSC...
Instaling Multi-CSC
mps_dat value: XEE
copy_multi_carrier from: XEE
multicsc : can not acces to /system/csc/XEE/syst
em/
copy_common_data E:Can't mount /dev/block/stl11
(Invalid argument)
E:Can't mount /dev/block/stl11
(Invalid argument)
I got this msg after my galaxy forced close, I guess it was was stuck on boot, it would not pass the S logo, was showing black screen and it was vibrating once_ pause_ twice every minute. I tried to flash with odin3 1.7 , pit 512, eclair, it worked, canot access market(msg still there), i flashed with froyo xxjpo, same message, and not able to download from market, and not have unmount option on sdcard...
thanks for helping guys, great forum!
try to see if you can format it
if not, then you are potentially looking at a dead internal SD
thanks for ansewer
I tried that it said fromat complete, but i still have the error message! the phone is working fine, other then being able to download from market...
u think that I can replace the sd card?
I had this same error using I think it was JM8 Firmware at the time, try a different firmware, fixed it for me =]
thanks I just flashed
http://forum.xda-developers.com/showpost.php?p=9289959&postcount=1
it's working!
rasdaq said:
it's working!
Click to expand...
Click to collapse
Good good

[Q] Telstra GT 9000T Can't mount dbdata

I tried to flash to jpu with Odin, Odin stopped responding before doing much, and I ended up with this error on my phone at the reboot:
E:can't mount /dev/block/st110
(invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
copy default media content failed.
I've tried to flash the telstra firmware back and tried a couple other roms. Odin reports success on everything but the jpu, but I still get the error after the reboot.
Can anyone provide this noob with some guidance?
Kyle
Did you find a solution to this? have the same problem...

[Q] Updating my Darky's Rom 8.0 to 9.5 major error. Help please

Hi There,
Sorry i'm posting, but i couldn't find anything similar to my error.
Anyway, I was on Darky's ROM 8.0. I followed the techlives.com guide on how-install-darky-rom-galaxy-s-353.html
and now i'm getting these errors w/c i can't back out from.
Dark Core Recovery - by Ficeto
E:Can't mount /dev/block/stl11
(File exists)
E:Can't mount CACHE:recovery/command
E:Can't mount /dev/block/stl11
(File exists)
E:Can't mount CACHE:recovery/log
E:Can't open CACHE:recovery/log
E:Can't mount /dev/block/stl11
(File exists)
I can't get through to the installation of the 9.5 ROM. I'm stuck right after a successful flash using Odin 1.3
Hope someone can help please. I've tried reverting, clearing cache, wiping data.
No success
if you are so keen to stick with darkys rom, flash 9.2 resurrection in odin, with 512pit and re-partition checked.
that should fix you up,
if you dont want to stay with darky, flash stock rom (eclair,froyo) in odin, again with 512 pit and re-partition checked

[Q] need help urgent here

Hi, I'm using darky 10.1 before..
i try to install http://forum.xda-developers.com/showthread.php?t=1080529 using SGS kernel flasher..
but after reboot, it just stucked on i9000 logo.
and when I pres vol up+home+power, I could not enter cwm recovery.
I found "android system recovery<3e>"
what should I do?
E: can't mount /cache bla bla in red text.. help please..
I think I must install cwm using odin.
how to install cwm using odin?
vol up+home+down is working.
need help.
E: can't mount /cache bla bla in red text.. help please..
this part is important, give us more info
or if you want to flash with another ROM you can do it, your able to get into download mode
its your call mate
good luck
RorixRebel said:
E: can't mount /cache bla bla in red text.. help please..
this part is important, give us more info
or if you want to flash with another ROM you can do it, your able to get into download mode
its your call mate
good luck
Click to expand...
Click to collapse
I would like to install another ROM, but I must disable lagfix.
(and I can't disable it due I can't access cwm)
e: copy_dbdata_media: can't mount /dbdata
your storage not prepared yet, please use UI menu for format and reboot actions.
Meida files copy failed.
#manual mode#
--applying multi-CSC...
installing multi-CSC
can't access to 'system/csc/XEE/system'.
sucessfully applied multi-CSC
e: failed to mount /cache (invalid argument)
e: can't mount /cache/recovery/recovery_kernel_log
e: copy kernel file :: can't open /cache/recovery/recovery_kernel_log
e: failed to mount /cache (invalid argument)
e: can't mount /cache/recovery/log
e: can't open /cache/recovery/log
e: failed to mount /cache (invalid argument)
e: can't mount /cache/recovery/last_log
e: can't open /cache/recovery/last_log
e: failed to mount /cache (invalid argument)
I think i remember this error.I had it one time when i forgot to take out my external sd and sim while i updated my speedmod kernel.Then i could see i have speedmod kernel in the phone information,but no CWM in recovery.I fixed by flashing the kernel again with Odin.I hope this helps.
problem solved!
thank you for answering..

Categories

Resources