[Q] Telstra GT 9000T Can't mount dbdata - Galaxy S I9000 Q&A, Help & Troubleshooting

I tried to flash to jpu with Odin, Odin stopped responding before doing much, and I ended up with this error on my phone at the reboot:
E:can't mount /dev/block/st110
(invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
copy default media content failed.
I've tried to flash the telstra firmware back and tried a couple other roms. Odin reports success on everything but the jpu, but I still get the error after the reboot.
Can anyone provide this noob with some guidance?
Kyle

Did you find a solution to this? have the same problem...

Related

[Q] Download Mode Won't Work!

Hi,
Badly need help. After flashing JM8 with CSC of JM2 using Odin, phone is stuck in boot up with the following error message:
Update media, please wait...
E: Can't mount /dev/block/st110
(Invalid Argument)
E:copy_dbdata_media: Can't mount DBDATA:
copy default media content failed.
This is the 2nd time I'm flashing my phone and during the first time I had the same error...Please help??
do a full flash of JM8 or JM2 don't mix and match CSC some are not compatible

[Q] Stuck on Reboot

Need help flashed jm8 through Odin, used correct files and have tried with repartition checked and unchecked.
On reboot just get:
E: Cant mount /dev/block/st110
(Invalid Argument)
E:copy_dbdata_media: cant mount DBDATA
copy default media content failed.
When I reboot it turns turns on to the s screen and then goes off again, any advice please?

[Q] What is this? ERROR Message on Recovery Screen!

Hi,
I got this this msg on recovery:
E:Can't mount /dev/block/stl11
(Invalid argument)
upadate media, please wait...
upadate media, finished
# MANUAL MODE #
--Appling Multi-CSC...
Instaling Multi-CSC
mps_dat value: XEE
copy_multi_carrier from: XEE
multicsc : can not acces to /system/csc/XEE/syst
em/
copy_common_data E:Can't mount /dev/block/stl11
(Invalid argument)
E:Can't mount /dev/block/stl11
(Invalid argument)
I got this msg after my galaxy forced close, I guess it was was stuck on boot, it would not pass the S logo, was showing black screen and it was vibrating once_ pause_ twice every minute. I tried to flash with odin3 1.7 , pit 512, eclair, it worked, canot access market(msg still there), i flashed with froyo xxjpo, same message, and not able to download from market, and not have unmount option on sdcard...
thanks for helping guys, great forum!
try to see if you can format it
if not, then you are potentially looking at a dead internal SD
thanks for ansewer
I tried that it said fromat complete, but i still have the error message! the phone is working fine, other then being able to download from market...
u think that I can replace the sd card?
I had this same error using I think it was JM8 Firmware at the time, try a different firmware, fixed it for me =]
thanks I just flashed
http://forum.xda-developers.com/showpost.php?p=9289959&postcount=1
it's working!
rasdaq said:
it's working!
Click to expand...
Click to collapse
Good good

[Q] Updating my Darky's Rom 8.0 to 9.5 major error. Help please

Hi There,
Sorry i'm posting, but i couldn't find anything similar to my error.
Anyway, I was on Darky's ROM 8.0. I followed the techlives.com guide on how-install-darky-rom-galaxy-s-353.html
and now i'm getting these errors w/c i can't back out from.
Dark Core Recovery - by Ficeto
E:Can't mount /dev/block/stl11
(File exists)
E:Can't mount CACHE:recovery/command
E:Can't mount /dev/block/stl11
(File exists)
E:Can't mount CACHE:recovery/log
E:Can't open CACHE:recovery/log
E:Can't mount /dev/block/stl11
(File exists)
I can't get through to the installation of the 9.5 ROM. I'm stuck right after a successful flash using Odin 1.3
Hope someone can help please. I've tried reverting, clearing cache, wiping data.
No success
if you are so keen to stick with darkys rom, flash 9.2 resurrection in odin, with 512pit and re-partition checked.
that should fix you up,
if you dont want to stay with darky, flash stock rom (eclair,froyo) in odin, again with 512 pit and re-partition checked

Galaxy S i9000 won't get past boot screen.

My phone when rebooting will not get past the galaxy S start up screen.
I tried to install Team hacksungs ICS for samsung Galaxy S i9000.
I went through all the steps as correctly as I thought but when it restarted for the final time it would get into ICS and present a message and ask me to restart, so I did and it would get stuck changing between the regular boot and cyanogen mod.
To fix this I thought it would be best to re flash it back to a ginger bread stock. which I did and that worked, I tried the process again in the hopes that it was something random but to no prevail.
Upon going into download mode i thought i'll just go flash back to the rooted version of my phone
But when I rebooted after that it would not get past the start up screen
I've even flashed it with the custom rom and with the stock gingerbread but they both start up the same and won't get past he start up screen.
Oddly if I use the custom rom which has clockwork recovery pre installed the reboot menu screen will that instead of the regular one.
I would take a picture but my phone is my only access to a camera
Here's what i'm looking at on the reboot menu: (hope it helps)
E:copy_dbdata_media:Can't mount /dbdata
your storage not prepared yet. please use UI men
u for format and rebbot actions
Media files copy failed.
# MANUAL MODE #
-- Appling multi CSC...
installing multi CSC
Can't access to '/system/csc/XEU/system/'.
Successfully applied multi CSC.
E:failed to mount /cache (Invalid argument)
E:can't mount /cache/recovery/recovery_kernal_lo
g
E:copy_kernel_file :: Can't open /cache/revovery
/recover_kernal_log
E:Failed to mount /cache (Invalid argument)
E:can't mount /cache/recovery/log
E:can't open /cache/recovery/log
E:Failed mount /cache (Invalid argument)
E:can't mount /cache/recovery/last_log
E:can't open /cache/recovery/last_log
E:failed to mount /cache (Invalid argument)
panteliskyriacou said:
My phone when rebooting will not get past the galaxy S start up screen.
I tried to install Team hacksungs ICS for samsung Galaxy S i9000.
I went through all the steps as correctly as I thought but when it restarted for the final time it would get into ICS and present a message and ask me to restart, so I did and it would get stuck changing between the regular boot and cyanogen mod.
To fix this I thought it would be best to re flash it back to a ginger bread stock. which I did and that worked, I tried the process again in the hopes that it was something random but to no prevail.
Upon going into download mode i thought i'll just go flash back to the rooted version of my phone
But when I rebooted after that it would not get past the start up screen
I've even flashed it with the custom rom and with the stock gingerbread but they both start up the same and won't get past he start up screen.
Oddly if I use the custom rom which has clockwork recovery pre installed the reboot menu screen will that instead of the regular one.
I would take a picture but my phone is my only access to a camera
Here's what i'm looking at on the reboot menu: (hope it helps)
E:copy_dbdata_media:Can't mount /dbdata
your storage not prepared yet. please use UI men
u for format and rebbot actions
Media files copy failed.
# MANUAL MODE #
-- Appling multi CSC...
installing multi CSC
Can't access to '/system/csc/XEU/system/'.
Successfully applied multi CSC.
E:failed to mount /cache (Invalid argument)
E:can't mount /cache/recovery/recovery_kernal_lo
g
E:copy_kernel_file :: Can't open /cache/revovery
/recover_kernal_log
E:Failed to mount /cache (Invalid argument)
E:can't mount /cache/recovery/log
E:can't open /cache/recovery/log
E:Failed mount /cache (Invalid argument)
E:can't mount /cache/recovery/last_log
E:can't open /cache/recovery/last_log
E:failed to mount /cache (Invalid argument)
Click to expand...
Click to collapse
Reflash stock rom(eg. Jvu) with Odin, with pit file and repatition ticked and let it boot. Reroot with cf-root jvu kernel

Categories

Resources