Plez help evert time i open my galaxy s gallary it says processcom.cooloris has stopped working.. n then force closes... i tried flashing but after opening gallary a few times it happens again.. plez help
that happened to me too, I had to make a backup of my data and do a factory restore before it became as good as new again.
emclondon said:
that happened to me too, I had to make a backup of my data and do a factory restore before it became as good as new again.
Click to expand...
Click to collapse
i did tht but same thing happened in like a few days again...
Related
I have been using desire alpha from day one it was release and after updated to alpha 12 .there seems to be some problem with my camera app it doesn't open just hangs on black screen tried wipe couple of times even tried stock rom and CY 5.0.4.1 but no use the camera force closes at black screen and sometimes i get an error "process com.android.camera" force close .............please help !
Try recovering to old nandroid backup, redownload the Alpha12, re-wipe and re-install?
Postal Dude said:
Try recovering to old nandroid backup, redownload the Alpha12, re-wipe and re-install?
Click to expand...
Click to collapse
already tried that ..tried complete wipe unrooted then rooted ...tried old backup.......no help ! just black screen
what ROM are you on now ??
lolittle said:
what ROM are you on now ??
Click to expand...
Click to collapse
right now I am on alpha 12 .
Attatched camera apk so try
adb push HTCCamera.apk /system/app/
If that does not work then do this
Go to recovery
Wipe, Wipe delvik cache etc
Do fresh install of CMs ROM or a Stock ROM
check camera after
EDIT: And next time you should post in either Q & A or General!!
This does not belong in development
lolittle said:
Attatched camera apk so try
adb push HTCCamera.apk /system/app/
If that does not work then do this
Go to recovery
Wipe, Wipe delvik cache etc
Do fresh install of CMs ROM or a Stock ROM
check camera after
EDIT: And next time you should post in either Q & A or General!!
This does not belong in development
Click to expand...
Click to collapse
Thanx bro just tried the both .........no use i think its a hardware problem .Is it possible to test the hardware ?
Don't think it's hardware as I'm on the same ROM as you and had the exact same issue !!
Luckily I got it resolved - though to be honest I'm not sure what exactly I did to fix it.
I got frustrated and did a combination of wipes, cleaning the cache, fix apk uid mismatches, clear storage and eventually it just started working
arifhanid said:
Don't think it's hardware as I'm on the same ROM as you and had the exact same issue !!
Luckily I got it resolved - though to be honest I'm not sure what exactly I did to fix it.
I got frustrated and did a combination of wipes, cleaning the cache, fix apk uid mismatches, clear storage and eventually it just started working
Click to expand...
Click to collapse
i have tried almost everything ...........gonna try apk uid fix ...lets c keepin my fingers crossed
soulpilot said:
i have tried almost everything ...........gonna try apk uid fix ...lets c keepin my fingers crossed
Click to expand...
Click to collapse
no luck still havin the black screen :-( :-( :-(
You should probably try reformatting the sdcard, along with wiping data and ext(if you have it). That would pretty much rule out software altogether.
Try reflashing the rom after that and it should work.
If it's any help - just before i got my camera back my Nexus was stuck on boot screen with the nexus logo with the open padlock.
I then had to go into Boot Loader to update the new ROM.
I guess if you can get it to hang on the Nexus initial bootup screen then it may work...
i think no can really help me on this issue !!!
Ok so I installed both cyanogen and google apps roms and everything. my phone booted up with the cyanogen logo and everything. but, it won't go past the google setup. i keep getting the "The application Setup Wizard (process com.android.setupwizard) has stopped unexpectedly. Please Try Again" message. I've forced closed it bout 20 times already and it won't go past that message. any ideas how i can fix this? thanks!
p.s.
i did do a nandroid backup so if i need to go back to that what would i do next?
iamdavid said:
Ok so I installed both cyanogen and google apps roms and everything. my phone booted up with the cyanogen logo and everything. but, it won't go past the google setup. i keep getting the "The application Setup Wizard (process com.android.setupwizard) has stopped unexpectedly. Please Try Again" message. I've forced closed it bout 20 times already and it won't go past that message. any ideas how i can fix this? thanks!
p.s.
i did do a nandroid backup so if i need to go back to that what would i do next?
Click to expand...
Click to collapse
Kick back to your nand, delete the rom and gapps, redownload them and reflash. It's possible that you just got a bad dl of one or the other. Make sure you wipe data and dalvik. I had this issue once, banged my head on the wall and just decided to get rid of it all and try again.
Yes same for me the whole time it was a bad download good luck
Root-Hack-Mod-Always™
this happened to me - I can get into the phone but nothing works - just blank screen with that error coming up frist - tried erasing everything, wipe dalvik cache, user cache, factory reset, etc. - then tried reflashing rom via CWM - still nothing works - my home and back buttons are also gone
Funkadelick said:
this happened to me - I can get into the phone but nothing works - just blank screen with that error coming up frist - tried erasing everything, wipe dalvik cache, user cache, factory reset, etc. - then tried reflashing rom via CWM - still nothing works - my home and back buttons are also gone
Click to expand...
Click to collapse
Do you have any nandriod backups? If so, run the backup and see what happens.
process com.huawei.setup_tmo
user7618 said:
Kick back to your nand, delete the rom and gapps, redownload them and reflash. It's possible that you just got a bad dl of one or the other. Make sure you wipe data and dalvik. I had this issue once, banged my head on the wall and just decided to get rid of it all and try again.
Click to expand...
Click to collapse
i stuck with the same issue on my mytouch q but i dont have a nanoid, need help,
dont wanna buy a new phone
since yesterday every process on the phone crashs.
If i wipe all data and flash any rom all process crash and I didn't get it run.
Has anybody an idea.
thanks in advance
this has happened to me a few times after constant flashing. i think something has been corrupted along the way.... DONT PANIC, if a full factory reset doesnt work, just flash back to a stock ROM with PIT and Re-partition. then start again... fixed it everytime for me
Oh and also.... Do you use Titanium Backup ?? if so, dont restore system data, Only App + App Data....
thx for the fast response. I got it work.
Hi, I've Installed the upper mentioned ROM from here http://forum.xda-developers.com/showthread.php?t=1079463 using the same instructions (i already had installed xRecovery). But when my phone boots, the startup application starts, in which i need to setup a google account, but i keep geting messages that all other background apps that i had are shutting down and i need to click on Force Close.
I'm using XPERIA X8, the latest official update of android 2.1 (It's sth like 2.1.1.C.0.0) baseband is xxx015.
The worst thing is that even launcher doesn't work.. I have 2 launchers installed. GoLauncher and the one that comes with ROM.
And when i try to use the one with ROM i get error
Code:
The application Launcher (process com.android.launcher) has stopped unexpectedly
The same thing happens with GoLauncher.
Any ideas?
Thanks in advance
use flastool to recover your device and try once again,if it dosent work again then u didnt full wipe.
try using other roms
Try full wipe on recoveRy,clear cashe and dalviu
sent from my mini by nAa
Tried, both times, and tried with full wipe, wipe dalvik and all other cache.. Still doesn't work. I will now try the FROYExp from TeamMex and will see if that works..
Just out of curiosity, if i have app2sd installed, would that cause any problems?
Just to update.. Worked great! after removing app2sd
I have ViperOne 4.2 rom installed with latest fw, radio and Elemental X kernel 10.10.1. I have this setup now for about 2 weeks or so and have not changed anything on my phone drastically or have installed any new software etc.
Today all of a sudden my phone rebooted and once it did i am greeted with the message that Unfortunately, the process com.android.systemui has stopped. When i click ok the UI seems to reboot itself quickly but then i get the same error message again and again after repeating these steps.
I have restarted my phone several times, even booted into safe mode only yet the same error keeps comming up again and again.
Can anybody advise what the problem could be or what to do to make it stop?
Worst case scenario i can restore from a Nandroid backup but i would prefer not atm as i'd rather know what is causing this problem.
Any help would be appriciated!
Great. I tried to delete the cache in recovery just as a try. When i rebooted i was greeted by stockish type of welcome screen with setup your phone info. So i went back to recovery to try restore the nandroid backup which is on my phone. After some time TWRP sais "Restore failed".... never had that before either.... wonderfull...
So this day just keeps getting weirder and weirder. While trying to somehow restore my nandroid (which still does not work btw) when i go to power off my phone via TWRP it sais no SU is installed and it seems i do not have root permissions.
Which is very odd because i am S-OFF, SuperCID for quite some time now....
What the hell is going on today? Meh...
I had the FC in com.android.systemui too, but so far i did`t have the issue with restoring. Would be also thankful for further advise...
Anybody an Idea?
bonzai80 said:
I had the FC in com.android.systemui too, but so far i did`t have the issue with restoring. Would be also thankful for further advise...
Anybody an Idea?
Click to expand...
Click to collapse
if you're using a custom rom try a 'dirty' flash (flash without wiping). That fixes most of these types of FCs without losing any data.
I am using the Viper 4.3 ROM, was choosing to NOT install some of the Apps that would be included on a regular install - maybe this causes the FC. I try without removing these applications. Thanks for your advise! :good: