Database Develop

XDA/o2 - showing green orizontal lines on display

Hello
I have a Xda/o2 pda gsm phone and I can't enter bootloader menu.
When I reset device i can see only vertical green lines not the 3 colours bootloader menu.
IPL: 2.17
SPL: 1.03
OS 2.17.7.2
How can I enter Bootloader menu?
Can anybody help me ?
Sorry for picture quality ...

Nobody met this problem ????
I can't reflash phone without bootloader menu!
If I plug USB cable in PDA, PC cannot see it!

I succeded to enter Bootlader menu but after flashing with:
CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
or
ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe
the phone doesn't start up!
It's shows only green lines screen.
I konw that is a G3 but don't now if it's AKU2 rom. How can i find out ?
Because after flash I have to unlock CID (it;s SIM unlock allready) to finish flashing and start up windows.
So what is the next step after flashing with ... let's say ... first rom posted here ... in order to XDA o2 start working normaly.
Thanks

Problem with flashing a new ROM

I’ve a problem with the ROMUpdateUtility.exe, when I follow these instructions:
-Enter bootloader (rainbowscreen)
-Connect to pc (activesync)
-Run the ROMUpdateUtility.exe and follow onscreen instructions
After the process bar appears on the screen of my pc, it also appears on my x1, but it stuck on 0%
And after that appears on the RUU.exe the Error message [262] Update Error .
I`m very frustrated, because I tried it all day, but it doesn't work.
Maybe you can help me………

http://forum.xda-developers.com/showthread.php?t=431218
Hardspl,
Regards,
WC

got the same problem, allready got hard-spl but allwways get error 262. only when i flash with an original rom it works. with a custom rom allways error 262. flashing a custom rom with the sd card method also doesnt work. anyone got any ideas how to solve this?

- Download and install .NET Framework 3.5 SP1
- If you are using Vista, install the Mobile Device Center 6.1
- Set up the ActiveSync (XP) / Mobile Device Center (Vista) connection with your X1
- Charge the battery to at least 50% or more
- (Re)Connect the X1
- Run X1_HardSPL.exe
- Follow the instructions (it should say something like "Image Version: 1.02.111.7" to "1.00.X1")
- If asked, press "Yes" on the X1
- Now a 4-color screen should show up, showing some version Info
- After that, a progressbar screen will be shown and the phone will reboot when finished
- Click "Finish" on the PC
- If you want to check if everything went fine, turn the device off (long power button press), then hold the "volume down" button and turn the device on again, still holding the "volume down" button until the 4-color screen shows up. It should read something like:
KOVS110
SPL-0.72.OliNex
MicroP1-787
MicroP2-707
- Remove and reinsert the battery to exit bootloader mode
this is in http://forum.xda-developers.com/showthread.php?t=446070

SiRIus[X] said:
- Download and install .NET Framework 3.5 SP1
- If you are using Vista, install the Mobile Device Center 6.1
- Set up the ActiveSync (XP) / Mobile Device Center (Vista) connection with your X1
- Charge the battery to at least 50% or more
- (Re)Connect the X1
- Run X1_HardSPL.exe
- Follow the instructions (it should say something like "Image Version: 1.02.111.7" to "1.00.X1")
- If asked, press "Yes" on the X1
- Now a 4-color screen should show up, showing some version Info
- After that, a progressbar screen will be shown and the phone will reboot when finished
- Click "Finish" on the PC
- If you want to check if everything went fine, turn the device off (long power button press), then hold the "volume down" button and turn the device on again, still holding the "volume down" button until the 4-color screen shows up. It should read something like:
KOVS110
SPL-0.72.OliNex
MicroP1-787
MicroP2-707
- Remove and reinsert the battery to exit bootloader mode
this is in http://forum.xda-developers.com/showthread.php?t=446070
Click to expand...
Click to collapse
i always did it like this, but it doesn't work,
the process bar always stuck at 0%

when i enter bootloader, it says
KOVS110
SPL-0.78.0000
MicroP1-787
MicroP2-707

i've solved my problem by reinstalling active sync, after that i could reinstall hard-spl and then i could flash a custom rom

i've solved my problem by reinstalling active sync, after that i could reinstall hard-spl and then i could flash a custom rom
Click to expand...
Click to collapse
doesn't work

if this is what your bootloader is saying the device is NOT hardspl'd and needs to be in order to flash a custom rom as per the link I posted.
As posted above your bootloader should look similar to this:
KOVS110
SPL-0.72.OliNex
MicroP1-787
MicroP2-707
Regards,
WC
ph07242 said:
when i enter bootloader, it says
KOVS110
SPL-0.78.0000
MicroP1-787
MicroP2-707
Click to expand...
Click to collapse

Wild Child said:
if this is what your bootloader is saying the device is NOT hardspl'd and needs to be in order to flash a custom rom as per the link I posted.
As posted above your bootloader should look similar to this:
KOVS110
SPL-0.72.OliNex
MicroP1-787
MicroP2-707
Regards,
WC
Click to expand...
Click to collapse
still the same problem [262] Update Error

Help XPERIA X1i

Hello everyone.
I recently became the owner of XPERIA X1i and now I am interested in the following:
1-How do I change the ROM, as is now in Italy to switch to English language.
2-What ROM to download and from where.
3-What other programs are required to change the ROM
I read the forum but we do not succeed to find his way around changing ROM
The data from the phone from bootloader screen
kovs110
SPL-0.78.0000
MicroP1-787
MicroP2-707
Please ask for help because I do not know a word of Italian
Something else I am from Serbia

Hello,
at first you have to unlock your phone with hardspl:
http://forum.xda-developers.com/showthread.php?t=431218
Instructions to flash Hard-SPL:
it's recommended you run the basic package, and don't flash the other attachment (MFG SPL - it is only for hackers).
0a) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en
0b) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobi...ce-center.mspx
1) download Hard-SPL package from attachment, extract to an empty folder.
2) it is recommended you download only the X1_HardSPL_v1.zip unless you want to tinker with MFG SPL (MFG SPL 0.52 is a separate attachment).
3) you must Have Phone Synced with PC in Windows Mobile!
4) run X1_HardSPL.exe. (if you want to flash MFG SPL: at this point replace the extracted RUU_Signed.nbh with the MFG version of RUU_Signed.nbh)
5) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
6) it should go to tricolour screen now and say 0.52.OliNex.MFG (this is SSPL!).
7) Hard-SPL flashes, device automatically reboots, job done.
8 ) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 0.72.OliNex (or 0.52.OliNex MFG).
NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter bootloader mode to see version: with the device turned OFF, press and hold the volume down button along with the power button, then release the power button, and finally release volume down button when bootloader tricolour screen appears.
NOTE 2: anyone having problems with the device entering SSPL automatically(your device doesn't go to tricolour screen), please copy Xperia-SSPL-Manual.exe from the Xperia-SSPL-Manual.zip attachment to the device and run it. then once the screen is in SSPL (tricolour screen saying 0.52.OliNex), run RUU on the PC (i.e. the rest of the hardspl package) manually.
NOTE 3: this is unsigned Hard-SPL. also, this has overwrite protection, if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is also available here - scroll down!
NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the Hard-SPL. use Xperia CustomRUU to flash other ROM images. for example this version: http://rapidshare.com/files/164933503/X1_CustomRUU.zip
Click to expand...
Click to collapse
now you can flash all modified roms.
i recommend you to flash roms with the "Micro SD Method".
look at: http://forum.xda-developers.com/showthread.php?t=445662
these are some good roms:
826x Series: http://forum.xda-developers.com/showthread.php?t=734175
Dynamics 2.1: http://forum.xda-developers.com/showthread.php?t=951694

[Q] Help Required regarding installing new ROM !!!

I am having Xperia X1 Black with factory installed Win Mo 6.1....so, now i wanted to try the Windows Mobile 6.5.3-Build- 29007. Can anyone help me with detailed procedure of installing new ROM on my X1.
I tried according to the procedure available in various post's. According to the procedure i need to first Hard SPL my phone. So, when i try doing that my progrees bar on the phone screen gets stuck at 0% and then i get a error that check the connection of the pc and phone.
In bootloader mode the configuration shown is as follows
KOVS110
SPL-0.78.0000
Micro P1-787
Micro P2-707
I even tried the direct SD card method in which i renamed the ROM file i.e RUU_signed.nbh to kovsimg.nbh...in this when i go to the bootloader mode, the tricolour screen shows with above mentioned specifications then after about few seconds another screen is displayed saying" LOADING..." and then gets stuck.
So, anybody can please help me with installing new ROM
Regards
Bhavik

guitarguru31 said:
I am having Xperia X1 Black with factory installed Win Mo 6.1....so, now i wanted to try the Windows Mobile 6.5.3-Build- 29007. Can anyone help me with detailed procedure of installing new ROM on my X1.
I tried according to the procedure available in various post's. According to the procedure i need to first Hard SPL my phone. So, when i try doing that my progrees bar on the phone screen gets stuck at 0% and then i get a error that check the connection of the pc and phone.
In bootloader mode the configuration shown is as follows
KOVS110
SPL-0.78.0000
Micro P1-787
Micro P2-707
I even tried the direct SD card method in which i renamed the ROM file i.e RUU_signed.nbh to kovsimg.nbh...in this when i go to the bootloader mode, the tricolour screen shows with above mentioned specifications then after about few seconds another screen is displayed saying" LOADING..." and then gets stuck.
So, anybody can please help me with installing new ROM
Regards
Bhavik
Click to expand...
Click to collapse
You bootloader should show
Kovs110
SPL-0.78.OliNex
MicroP1-787
MicroP2-707
don't know if .0000 and OliNex is different
http://forum.xda-developers.com/showthread.php?t=431218
look here for download the good Hard SPL and then replace the 0.78 in it, HARD SPL with cable / computer (I never use SD CARD because it never works for me)
then you TASK29 (find it in the forum), then you can flash it =)

[Q] help me gys please

my experia is stck in windows mobile 6.1 i try to flash it with other roms but it when it start it stuch in 0% and i get error 260 help me gys pleasssssssssse

Did you flashed your phone with HardSPL? Are you trying to flash phone by USB or MicroSD card?

U should upgrade ur HSPL first and u'd better use sd-card to flash rom

first thanks for the replies guys
i try to flash it it with USB but it stck in 0% and with SD card stay in loading my SPL is
KOVS110
SPL-0.78.0000
Microp1-787
Microp2-707
please help me guys pleaaaaaaase

May you have to flash your HSPL again!
Mine is
KOVS110
SPL-0.72.0liNex
Microp1-787
Microp2-707

yes i try to flash it with another HARDSPL but no matter i try it stuck in 0% the only roms has succed is win 6.1 and i get
KOVS110
SPL-0.72.0000
Microp1-787
Microp2-707

samisou said:
yes i try to flash it with another HARDSPL but no matter i try it stuck in 0% the only roms has succed is win 6.1 and i get
KOVS110
SPL-0.72.0000
Microp1-787
Microp2-707
Click to expand...
Click to collapse
can any one help me please

i think i had the same problem once... never could it get running. the thing is, i have no idea how i get it to work finally... i had WM 6.1 and i couldnt flash it. then i upgraded it to 6.5 and it worked. but i hardly can believe thats the problem...