my experia is stck in windows mobile 6.1 i try to flash it with other roms but it when it start it stuch in 0% and i get error 260 help me gys pleasssssssssse
Did you flashed your phone with HardSPL? Are you trying to flash phone by USB or MicroSD card?
U should upgrade ur HSPL first and u'd better use sd-card to flash rom
first thanks for the replies guys
i try to flash it it with USB but it stck in 0% and with SD card stay in loading my SPL is
KOVS110
SPL-0.78.0000
Microp1-787
Microp2-707
please help me guys pleaaaaaaase
May you have to flash your HSPL again!
Mine is
KOVS110
SPL-0.72.0liNex
Microp1-787
Microp2-707
yes i try to flash it with another HARDSPL but no matter i try it stuck in 0% the only roms has succed is win 6.1 and i get
KOVS110
SPL-0.72.0000
Microp1-787
Microp2-707
samisou said:
yes i try to flash it with another HARDSPL but no matter i try it stuck in 0% the only roms has succed is win 6.1 and i get
KOVS110
SPL-0.72.0000
Microp1-787
Microp2-707
Click to expand...
Click to collapse
can any one help me please
i think i had the same problem once... never could it get running. the thing is, i have no idea how i get it to work finally... i had WM 6.1 and i couldnt flash it. then i upgraded it to 6.5 and it worked. but i hardly can believe thats the problem...
Related
i need some help here...
i finally have fond a Generik NL Rom
but it wont flash
i have done everything from back up my old vodafone one to hard SPL
but when i put de Kovsimg.nbh on my to fat32 converted micro SD
and open the bootloader it gives de tri-colour screen and says:
in the red: Kovs110
spl-0.72.OliNex
MicroP1-787
MicroP2-707
and in the white is goes direct to ''Serial''
do any one know how to fix it?
On power on I get this :
Upgrade ROM code error
Please try again
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-707
Thanx !
usernome said:
On power on I get this :
Upgrade ROM code error
Please try again
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-707
Thanx !
Click to expand...
Click to collapse
You have to hard SPL it. Just find the corrsponding thread above (1st page) and follow instructions...quite easy!
Hi...
I got stuck in bootloader (Tri-Color)screen with KAIS130 SPL-3.29.HArd i`m not able to boot the OS ... I have installed the
Dutty_s_WM6.1_Official_UC_5.2.19199_RTM__nocube with Radio 1.65.16.25,
i did the HardSPL and still i cannot boot the os cause of the bootloader..
Also i`m trying to 'boot' via mtty.exe but it says command error, it responds
only "task 8" but it stops and cannot write nothing else (device reboots in
bootloder mode)... Is there a way to make my kaiser work ? Cannt unlock
cant change the SPL.
http://forum.xda-developers.com/showthread.php?t=354061
http://forum.xda-developers.com/showthread.php?t=334679
http://forum.xda-developers.com/showthread.php?t=354061
all from these links didn`t help me to boot the phone...
Please just inform me what is wrong in with the spl and how can i reflash again.
Best regards,
In Advance
any tools to check my X1 is ready to flash ROMs? ie check the spl is unlocked already.
thank
Hard-SPL is needed and Nothing else ,Power Off, Hold Volume Down and Power Key for a while,then it comes to the Rom Flash Screen, If you find words of first line is Oilnex,that is to say your device is already unlocked spl,then help yourself with Flash rom , Does not need any tools to check it ,Good Luck With It
Hi,
I saw
KOVS110
SPL-0.72.OliNex
MicroP1-787
MicroP2-707
& the bottom have a line 'serial'
So is it unlocked? then I can just flash the ROMs?
annerose said:
Hi,
I saw
KOVS110
SPL-0.72.OliNex
MicroP1-787
MicroP2-707
& the bottom have a line 'serial'
So is it unlocked? then I can just flash the ROMs?
Click to expand...
Click to collapse
yes, on your xperia x1 is hardspl installed.
you can flash all roms!
Moved to Q&A, Not ROM Dev
may I ask, if the flashing is not successfully, the device can't switch on or power on, what I can I do to solve the problem?
Thank.
I am having Xperia X1 Black with factory installed Win Mo 6.1....so, now i wanted to try the Windows Mobile 6.5.3-Build- 29007. Can anyone help me with detailed procedure of installing new ROM on my X1.
I tried according to the procedure available in various post's. According to the procedure i need to first Hard SPL my phone. So, when i try doing that my progrees bar on the phone screen gets stuck at 0% and then i get a error that check the connection of the pc and phone.
In bootloader mode the configuration shown is as follows
KOVS110
SPL-0.78.0000
Micro P1-787
Micro P2-707
I even tried the direct SD card method in which i renamed the ROM file i.e RUU_signed.nbh to kovsimg.nbh...in this when i go to the bootloader mode, the tricolour screen shows with above mentioned specifications then after about few seconds another screen is displayed saying" LOADING..." and then gets stuck.
So, anybody can please help me with installing new ROM
Regards
Bhavik
guitarguru31 said:
I am having Xperia X1 Black with factory installed Win Mo 6.1....so, now i wanted to try the Windows Mobile 6.5.3-Build- 29007. Can anyone help me with detailed procedure of installing new ROM on my X1.
I tried according to the procedure available in various post's. According to the procedure i need to first Hard SPL my phone. So, when i try doing that my progrees bar on the phone screen gets stuck at 0% and then i get a error that check the connection of the pc and phone.
In bootloader mode the configuration shown is as follows
KOVS110
SPL-0.78.0000
Micro P1-787
Micro P2-707
I even tried the direct SD card method in which i renamed the ROM file i.e RUU_signed.nbh to kovsimg.nbh...in this when i go to the bootloader mode, the tricolour screen shows with above mentioned specifications then after about few seconds another screen is displayed saying" LOADING..." and then gets stuck.
So, anybody can please help me with installing new ROM
Regards
Bhavik
Click to expand...
Click to collapse
You bootloader should show
Kovs110
SPL-0.78.OliNex
MicroP1-787
MicroP2-707
don't know if .0000 and OliNex is different
http://forum.xda-developers.com/showthread.php?t=431218
look here for download the good Hard SPL and then replace the 0.78 in it, HARD SPL with cable / computer (I never use SD CARD because it never works for me)
then you TASK29 (find it in the forum), then you can flash it =)