Related
i need some help here...
i finally have fond a Generik NL Rom
but it wont flash
i have done everything from back up my old vodafone one to hard SPL
but when i put de Kovsimg.nbh on my to fat32 converted micro SD
and open the bootloader it gives de tri-colour screen and says:
in the red: Kovs110
spl-0.72.OliNex
MicroP1-787
MicroP2-707
and in the white is goes direct to ''Serial''
do any one know how to fix it?
Hi,
My Trinity (s300+) stops working yesterday night : it was buggy, so I decided to do a soft reset, but then after it starts I get the splash screen for 1 second and it turns off. I tried a hard reset but nothing change.
I tried "splxploit" in order to have a HardSPL installed and then to flash a ROM through a SD but the problem is that the update looks OK but is not stored in the phone:
- when I entered the bootloader I had :
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
- after running "splxploit" I had on the screen:
TRIN100
IPL-USPL
TRIN100
SPL-1.20.Olipro
- after doing a soft reset and reentering the bootloader I have again:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
Is there something wrong with what I am trying to do, or should I start considering that it may be now a brick ?
Thank you for your help,
Mika
mikahtc2 said:
Hi,
My Trinity (s300+) stops working yesterday night : it was buggy, so I decided to do a soft reset, but then after it starts I get the splash screen for 1 second and it turns off. I tried a hard reset but nothing change.
I tried "splxploit" in order to have a HardSPL installed and then to flash a ROM through a SD but the problem is that the update looks OK but is not stored in the phone:
- when I entered the bootloader I had :
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
- after running "splxploit" I had on the screen:
TRIN100
IPL-USPL
TRIN100
SPL-1.20.Olipro
- after doing a soft reset and reentering the bootloader I have again:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
Is there something wrong with what I am trying to do, or should I start considering that it may be now a brick ?
Thank you for your help,
Mika
Click to expand...
Click to collapse
Hi,Mika maybe I can help u to upgrade ur SSPL,busy now maybe I will send to u later,K
Try here,maybe this can help u.
mikahtc2 said:
Hi,
My Trinity (s300+) stops working yesterday night : it was buggy, so I decided to do a soft reset, but then after it starts I get the splash screen for 1 second and it turns off. I tried a hard reset but nothing change.
I tried "splxploit" in order to have a HardSPL installed and then to flash a ROM through a SD but the problem is that the update looks OK but is not stored in the phone:
- when I entered the bootloader I had :
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
- after running "splxploit" I had on the screen:
TRIN100
IPL-USPL
TRIN100
SPL-1.20.Olipro
- after doing a soft reset and reentering the bootloader I have again:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
Is there something wrong with what I am trying to do, or should I start considering that it may be now a brick ?
Thank you for your help,
Mika
Click to expand...
Click to collapse
Mika,please download from here http://forum.xda-developers.com/showthread.php?t=293632
Down load SSPL-Trin.Zip and unzip it,or try to use "WIN RAR" software to unzip,copy SSPL-Trin to ur device,click on it bootloader will prot out,plug in cable wait for Sync(Screen will show "USB"),download rom in progress,follow instruction untill finished,pull out cable soft reset ur device
Good Luck,Mika
From Eddie (Malaysia)
Email : [email protected]
Thank you for your answer.
Unfortunately, my problem is that I cannot run a program on my Trinity since I cannot start it anymore (I just got the splashscreen, and it turns off).
I can also start with the bootloader mode and this is why I tried the 'splxploit' .
Hope there is still something to do to heal it
Mika
mikahtc2 said:
Thank you for your answer.
Unfortunately, my problem is that I cannot run a program on my Trinity since I cannot start it anymore (I just got the splashscreen, and it turns off).
I can also start with the bootloader mode and this is why I tried the 'splxploit' .
Hope there is still something to do to heal it
Mika
Click to expand...
Click to collapse
Hope this will help ur device wake up again.
1.)RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30 .11_108_Ship.exe
Down load this and extr it,u can see few files and look for the file name RUU.xxx.NBH file,and just rename it as TRINIMG.nbh
2.)now you must use Mini SD,format it to FAT 32,with no Volume Label(go to folder right hand click and format it to FAT 32 at FAT colum,after that erase the volume label etc "KINGston"farmat card.
3.)copy file TRINIMG.nbh to your Mini SD Card,now ur screen blank right?slot in MiniSD,now boot from card,you will see "loading"follow by "checking" then it will prot out some like Boot file checking at you screen,press power botton to start boot from card,plug in your cable before start,wait for completed,soft reset you device,now ur device wake up again.
*** if want to boot win 6.1 new Rom,now you can follow previouse format that I already sended to you,any problem please reply to my mail please.Mika
I like to see ur device wake up again.
From : Eddie
Thank you again Eddie,
There was no file attached to your message.
I tried anyway with another ROM package, rename the nbh file to TRINIMG.nbh, copy it to an SD card formatted FAT with no label. I start the bootloader "Camera Button" + "Power button" + "Reset" button, but only get:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
Serial
Nothing about "loading" or "checking" ... :-/
When you said "boot from card" in your message, did you mean entering the bootloader as I did ?
Thank you for your help,
Mika
mikahtc2 said:
Thank you again Eddie,
There was no file attached to your message.
I tried anyway with another ROM package, rename the nbh file to TRINIMG.nbh, copy it to an SD card formatted FAT with no label. I start the bootloader "Camera Button" + "Power button" + "Reset" button, but only get:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
Serial
Nothing about "loading" or "checking" ... :-/
When you said "boot from card" in your message, did you mean entering the bootloader as I did ?
Thank you for your help,
Mika
Click to expand...
Click to collapse
Hi,Mika that I found that you format to FAT(Should format to FAT 32)just at the colume of FAT click down the arrow to select FAT 32 when u right hand click and look for format,and here is the Asia Original Rom I found
http://rapidshare.com/files/46816571...1_108_Ship.exe
Extract RUU.Signed.nbh rom file and rename it to TRINIMG.nbh,copy to Mini SD Card (Your Mini SD Card can not have any file in there,Except TRINIMG.nbh file only),on bootloader,plug in Charger and slot in ur card,screen will show u previousely what I'am show u press power/on-off botton and start untill step by step completed
Keep trying Mika
Good Luck
From : Eddie
mikahtc2 said:
Thank you again Eddie,
There was no file attached to your message.
I tried anyway with another ROM package, rename the nbh file to TRINIMG.nbh, copy it to an SD card formatted FAT with no label. I start the bootloader "Camera Button" + "Power button" + "Reset" button, but only get:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
Serial
Nothing about "loading" or "checking" ... :-/
When you said "boot from card" in your message, did you mean entering the bootloader as I did ?
Thank you for your help,
Mika
Click to expand...
Click to collapse
Your set is it ok
From : Eddie
to Mika
Hi Mika and all,
I have same problem as u, on my Trinity!
How was a solvent?
thanks for your answer
I’ve a problem with the ROMUpdateUtility.exe, when I follow these instructions:
-Enter bootloader (rainbowscreen)
-Connect to pc (activesync)
-Run the ROMUpdateUtility.exe and follow onscreen instructions
After the process bar appears on the screen of my pc, it also appears on my x1, but it stuck on 0%
And after that appears on the RUU.exe the Error message [262] Update Error .
I`m very frustrated, because I tried it all day, but it doesn't work.
Maybe you can help me………
http://forum.xda-developers.com/showthread.php?t=431218
Hardspl,
Regards,
WC
got the same problem, allready got hard-spl but allwways get error 262. only when i flash with an original rom it works. with a custom rom allways error 262. flashing a custom rom with the sd card method also doesnt work. anyone got any ideas how to solve this?
- Download and install .NET Framework 3.5 SP1
- If you are using Vista, install the Mobile Device Center 6.1
- Set up the ActiveSync (XP) / Mobile Device Center (Vista) connection with your X1
- Charge the battery to at least 50% or more
- (Re)Connect the X1
- Run X1_HardSPL.exe
- Follow the instructions (it should say something like "Image Version: 1.02.111.7" to "1.00.X1")
- If asked, press "Yes" on the X1
- Now a 4-color screen should show up, showing some version Info
- After that, a progressbar screen will be shown and the phone will reboot when finished
- Click "Finish" on the PC
- If you want to check if everything went fine, turn the device off (long power button press), then hold the "volume down" button and turn the device on again, still holding the "volume down" button until the 4-color screen shows up. It should read something like:
KOVS110
SPL-0.72.OliNex
MicroP1-787
MicroP2-707
- Remove and reinsert the battery to exit bootloader mode
this is in http://forum.xda-developers.com/showthread.php?t=446070
SiRIus[X] said:
- Download and install .NET Framework 3.5 SP1
- If you are using Vista, install the Mobile Device Center 6.1
- Set up the ActiveSync (XP) / Mobile Device Center (Vista) connection with your X1
- Charge the battery to at least 50% or more
- (Re)Connect the X1
- Run X1_HardSPL.exe
- Follow the instructions (it should say something like "Image Version: 1.02.111.7" to "1.00.X1")
- If asked, press "Yes" on the X1
- Now a 4-color screen should show up, showing some version Info
- After that, a progressbar screen will be shown and the phone will reboot when finished
- Click "Finish" on the PC
- If you want to check if everything went fine, turn the device off (long power button press), then hold the "volume down" button and turn the device on again, still holding the "volume down" button until the 4-color screen shows up. It should read something like:
KOVS110
SPL-0.72.OliNex
MicroP1-787
MicroP2-707
- Remove and reinsert the battery to exit bootloader mode
this is in http://forum.xda-developers.com/showthread.php?t=446070
Click to expand...
Click to collapse
i always did it like this, but it doesn't work,
the process bar always stuck at 0%
when i enter bootloader, it says
KOVS110
SPL-0.78.0000
MicroP1-787
MicroP2-707
i've solved my problem by reinstalling active sync, after that i could reinstall hard-spl and then i could flash a custom rom
i've solved my problem by reinstalling active sync, after that i could reinstall hard-spl and then i could flash a custom rom
Click to expand...
Click to collapse
doesn't work
if this is what your bootloader is saying the device is NOT hardspl'd and needs to be in order to flash a custom rom as per the link I posted.
As posted above your bootloader should look similar to this:
KOVS110
SPL-0.72.OliNex
MicroP1-787
MicroP2-707
Regards,
WC
ph07242 said:
when i enter bootloader, it says
KOVS110
SPL-0.78.0000
MicroP1-787
MicroP2-707
Click to expand...
Click to collapse
Wild Child said:
if this is what your bootloader is saying the device is NOT hardspl'd and needs to be in order to flash a custom rom as per the link I posted.
As posted above your bootloader should look similar to this:
KOVS110
SPL-0.72.OliNex
MicroP1-787
MicroP2-707
Regards,
WC
Click to expand...
Click to collapse
still the same problem [262] Update Error
any tools to check my X1 is ready to flash ROMs? ie check the spl is unlocked already.
thank
Hard-SPL is needed and Nothing else ,Power Off, Hold Volume Down and Power Key for a while,then it comes to the Rom Flash Screen, If you find words of first line is Oilnex,that is to say your device is already unlocked spl,then help yourself with Flash rom , Does not need any tools to check it ,Good Luck With It
Hi,
I saw
KOVS110
SPL-0.72.OliNex
MicroP1-787
MicroP2-707
& the bottom have a line 'serial'
So is it unlocked? then I can just flash the ROMs?
annerose said:
Hi,
I saw
KOVS110
SPL-0.72.OliNex
MicroP1-787
MicroP2-707
& the bottom have a line 'serial'
So is it unlocked? then I can just flash the ROMs?
Click to expand...
Click to collapse
yes, on your xperia x1 is hardspl installed.
you can flash all roms!
Moved to Q&A, Not ROM Dev
may I ask, if the flashing is not successfully, the device can't switch on or power on, what I can I do to solve the problem?
Thank.
my experia is stck in windows mobile 6.1 i try to flash it with other roms but it when it start it stuch in 0% and i get error 260 help me gys pleasssssssssse
Did you flashed your phone with HardSPL? Are you trying to flash phone by USB or MicroSD card?
U should upgrade ur HSPL first and u'd better use sd-card to flash rom
first thanks for the replies guys
i try to flash it it with USB but it stck in 0% and with SD card stay in loading my SPL is
KOVS110
SPL-0.78.0000
Microp1-787
Microp2-707
please help me guys pleaaaaaaase
May you have to flash your HSPL again!
Mine is
KOVS110
SPL-0.72.0liNex
Microp1-787
Microp2-707
yes i try to flash it with another HARDSPL but no matter i try it stuck in 0% the only roms has succed is win 6.1 and i get
KOVS110
SPL-0.72.0000
Microp1-787
Microp2-707
samisou said:
yes i try to flash it with another HARDSPL but no matter i try it stuck in 0% the only roms has succed is win 6.1 and i get
KOVS110
SPL-0.72.0000
Microp1-787
Microp2-707
Click to expand...
Click to collapse
can any one help me please
i think i had the same problem once... never could it get running. the thing is, i have no idea how i get it to work finally... i had WM 6.1 and i couldnt flash it. then i upgraded it to 6.5 and it worked. but i hardly can believe thats the problem...