Related
Hi,
My Trinity (s300+) stops working yesterday night : it was buggy, so I decided to do a soft reset, but then after it starts I get the splash screen for 1 second and it turns off. I tried a hard reset but nothing change.
I tried "splxploit" in order to have a HardSPL installed and then to flash a ROM through a SD but the problem is that the update looks OK but is not stored in the phone:
- when I entered the bootloader I had :
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
- after running "splxploit" I had on the screen:
TRIN100
IPL-USPL
TRIN100
SPL-1.20.Olipro
- after doing a soft reset and reentering the bootloader I have again:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
Is there something wrong with what I am trying to do, or should I start considering that it may be now a brick ?
Thank you for your help,
Mika
mikahtc2 said:
Hi,
My Trinity (s300+) stops working yesterday night : it was buggy, so I decided to do a soft reset, but then after it starts I get the splash screen for 1 second and it turns off. I tried a hard reset but nothing change.
I tried "splxploit" in order to have a HardSPL installed and then to flash a ROM through a SD but the problem is that the update looks OK but is not stored in the phone:
- when I entered the bootloader I had :
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
- after running "splxploit" I had on the screen:
TRIN100
IPL-USPL
TRIN100
SPL-1.20.Olipro
- after doing a soft reset and reentering the bootloader I have again:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
Is there something wrong with what I am trying to do, or should I start considering that it may be now a brick ?
Thank you for your help,
Mika
Click to expand...
Click to collapse
Hi,Mika maybe I can help u to upgrade ur SSPL,busy now maybe I will send to u later,K
Try here,maybe this can help u.
mikahtc2 said:
Hi,
My Trinity (s300+) stops working yesterday night : it was buggy, so I decided to do a soft reset, but then after it starts I get the splash screen for 1 second and it turns off. I tried a hard reset but nothing change.
I tried "splxploit" in order to have a HardSPL installed and then to flash a ROM through a SD but the problem is that the update looks OK but is not stored in the phone:
- when I entered the bootloader I had :
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
- after running "splxploit" I had on the screen:
TRIN100
IPL-USPL
TRIN100
SPL-1.20.Olipro
- after doing a soft reset and reentering the bootloader I have again:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
Is there something wrong with what I am trying to do, or should I start considering that it may be now a brick ?
Thank you for your help,
Mika
Click to expand...
Click to collapse
Mika,please download from here http://forum.xda-developers.com/showthread.php?t=293632
Down load SSPL-Trin.Zip and unzip it,or try to use "WIN RAR" software to unzip,copy SSPL-Trin to ur device,click on it bootloader will prot out,plug in cable wait for Sync(Screen will show "USB"),download rom in progress,follow instruction untill finished,pull out cable soft reset ur device
Good Luck,Mika
From Eddie (Malaysia)
Email : [email protected]
Thank you for your answer.
Unfortunately, my problem is that I cannot run a program on my Trinity since I cannot start it anymore (I just got the splashscreen, and it turns off).
I can also start with the bootloader mode and this is why I tried the 'splxploit' .
Hope there is still something to do to heal it
Mika
mikahtc2 said:
Thank you for your answer.
Unfortunately, my problem is that I cannot run a program on my Trinity since I cannot start it anymore (I just got the splashscreen, and it turns off).
I can also start with the bootloader mode and this is why I tried the 'splxploit' .
Hope there is still something to do to heal it
Mika
Click to expand...
Click to collapse
Hope this will help ur device wake up again.
1.)RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30 .11_108_Ship.exe
Down load this and extr it,u can see few files and look for the file name RUU.xxx.NBH file,and just rename it as TRINIMG.nbh
2.)now you must use Mini SD,format it to FAT 32,with no Volume Label(go to folder right hand click and format it to FAT 32 at FAT colum,after that erase the volume label etc "KINGston"farmat card.
3.)copy file TRINIMG.nbh to your Mini SD Card,now ur screen blank right?slot in MiniSD,now boot from card,you will see "loading"follow by "checking" then it will prot out some like Boot file checking at you screen,press power botton to start boot from card,plug in your cable before start,wait for completed,soft reset you device,now ur device wake up again.
*** if want to boot win 6.1 new Rom,now you can follow previouse format that I already sended to you,any problem please reply to my mail please.Mika
I like to see ur device wake up again.
From : Eddie
Thank you again Eddie,
There was no file attached to your message.
I tried anyway with another ROM package, rename the nbh file to TRINIMG.nbh, copy it to an SD card formatted FAT with no label. I start the bootloader "Camera Button" + "Power button" + "Reset" button, but only get:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
Serial
Nothing about "loading" or "checking" ... :-/
When you said "boot from card" in your message, did you mean entering the bootloader as I did ?
Thank you for your help,
Mika
mikahtc2 said:
Thank you again Eddie,
There was no file attached to your message.
I tried anyway with another ROM package, rename the nbh file to TRINIMG.nbh, copy it to an SD card formatted FAT with no label. I start the bootloader "Camera Button" + "Power button" + "Reset" button, but only get:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
Serial
Nothing about "loading" or "checking" ... :-/
When you said "boot from card" in your message, did you mean entering the bootloader as I did ?
Thank you for your help,
Mika
Click to expand...
Click to collapse
Hi,Mika that I found that you format to FAT(Should format to FAT 32)just at the colume of FAT click down the arrow to select FAT 32 when u right hand click and look for format,and here is the Asia Original Rom I found
http://rapidshare.com/files/46816571...1_108_Ship.exe
Extract RUU.Signed.nbh rom file and rename it to TRINIMG.nbh,copy to Mini SD Card (Your Mini SD Card can not have any file in there,Except TRINIMG.nbh file only),on bootloader,plug in Charger and slot in ur card,screen will show u previousely what I'am show u press power/on-off botton and start untill step by step completed
Keep trying Mika
Good Luck
From : Eddie
mikahtc2 said:
Thank you again Eddie,
There was no file attached to your message.
I tried anyway with another ROM package, rename the nbh file to TRINIMG.nbh, copy it to an SD card formatted FAT with no label. I start the bootloader "Camera Button" + "Power button" + "Reset" button, but only get:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
Serial
Nothing about "loading" or "checking" ... :-/
When you said "boot from card" in your message, did you mean entering the bootloader as I did ?
Thank you for your help,
Mika
Click to expand...
Click to collapse
Your set is it ok
From : Eddie
to Mika
Hi Mika and all,
I have same problem as u, on my Trinity!
How was a solvent?
thanks for your answer
any tools to check my X1 is ready to flash ROMs? ie check the spl is unlocked already.
thank
Hard-SPL is needed and Nothing else ,Power Off, Hold Volume Down and Power Key for a while,then it comes to the Rom Flash Screen, If you find words of first line is Oilnex,that is to say your device is already unlocked spl,then help yourself with Flash rom , Does not need any tools to check it ,Good Luck With It
Hi,
I saw
KOVS110
SPL-0.72.OliNex
MicroP1-787
MicroP2-707
& the bottom have a line 'serial'
So is it unlocked? then I can just flash the ROMs?
annerose said:
Hi,
I saw
KOVS110
SPL-0.72.OliNex
MicroP1-787
MicroP2-707
& the bottom have a line 'serial'
So is it unlocked? then I can just flash the ROMs?
Click to expand...
Click to collapse
yes, on your xperia x1 is hardspl installed.
you can flash all roms!
Moved to Q&A, Not ROM Dev
may I ask, if the flashing is not successfully, the device can't switch on or power on, what I can I do to solve the problem?
Thank.
I am having Xperia X1 Black with factory installed Win Mo 6.1....so, now i wanted to try the Windows Mobile 6.5.3-Build- 29007. Can anyone help me with detailed procedure of installing new ROM on my X1.
I tried according to the procedure available in various post's. According to the procedure i need to first Hard SPL my phone. So, when i try doing that my progrees bar on the phone screen gets stuck at 0% and then i get a error that check the connection of the pc and phone.
In bootloader mode the configuration shown is as follows
KOVS110
SPL-0.78.0000
Micro P1-787
Micro P2-707
I even tried the direct SD card method in which i renamed the ROM file i.e RUU_signed.nbh to kovsimg.nbh...in this when i go to the bootloader mode, the tricolour screen shows with above mentioned specifications then after about few seconds another screen is displayed saying" LOADING..." and then gets stuck.
So, anybody can please help me with installing new ROM
Regards
Bhavik
guitarguru31 said:
I am having Xperia X1 Black with factory installed Win Mo 6.1....so, now i wanted to try the Windows Mobile 6.5.3-Build- 29007. Can anyone help me with detailed procedure of installing new ROM on my X1.
I tried according to the procedure available in various post's. According to the procedure i need to first Hard SPL my phone. So, when i try doing that my progrees bar on the phone screen gets stuck at 0% and then i get a error that check the connection of the pc and phone.
In bootloader mode the configuration shown is as follows
KOVS110
SPL-0.78.0000
Micro P1-787
Micro P2-707
I even tried the direct SD card method in which i renamed the ROM file i.e RUU_signed.nbh to kovsimg.nbh...in this when i go to the bootloader mode, the tricolour screen shows with above mentioned specifications then after about few seconds another screen is displayed saying" LOADING..." and then gets stuck.
So, anybody can please help me with installing new ROM
Regards
Bhavik
Click to expand...
Click to collapse
You bootloader should show
Kovs110
SPL-0.78.OliNex
MicroP1-787
MicroP2-707
don't know if .0000 and OliNex is different
http://forum.xda-developers.com/showthread.php?t=431218
look here for download the good Hard SPL and then replace the 0.78 in it, HARD SPL with cable / computer (I never use SD CARD because it never works for me)
then you TASK29 (find it in the forum), then you can flash it =)
my experia is stck in windows mobile 6.1 i try to flash it with other roms but it when it start it stuch in 0% and i get error 260 help me gys pleasssssssssse
Did you flashed your phone with HardSPL? Are you trying to flash phone by USB or MicroSD card?
U should upgrade ur HSPL first and u'd better use sd-card to flash rom
first thanks for the replies guys
i try to flash it it with USB but it stck in 0% and with SD card stay in loading my SPL is
KOVS110
SPL-0.78.0000
Microp1-787
Microp2-707
please help me guys pleaaaaaaase
May you have to flash your HSPL again!
Mine is
KOVS110
SPL-0.72.0liNex
Microp1-787
Microp2-707
yes i try to flash it with another HARDSPL but no matter i try it stuck in 0% the only roms has succed is win 6.1 and i get
KOVS110
SPL-0.72.0000
Microp1-787
Microp2-707
samisou said:
yes i try to flash it with another HARDSPL but no matter i try it stuck in 0% the only roms has succed is win 6.1 and i get
KOVS110
SPL-0.72.0000
Microp1-787
Microp2-707
Click to expand...
Click to collapse
can any one help me please
i think i had the same problem once... never could it get running. the thing is, i have no idea how i get it to work finally... i had WM 6.1 and i couldnt flash it. then i upgraded it to 6.5 and it worked. but i hardly can believe thats the problem...
Hey guys, Google hasn't been as kind as ya'll are here, so I figured I'd give you a try. My mothers HTC HD7 failed to update via Zune a few months ago, and it has been stuck on the splash screen since (HTC with white background). So I took it from her since she now has an Android, and I'm looking to modify it. Upon booting into the hard reset mode, I do not get the actual recovery, I get a red, green, blue, and white screen. It reads as follows:
PD29110 SS-BC (4K) <------- In Red Rectangle
SPL-1.20.2250.0(111584)
MicroP(LED) 0x07
TOUCH S1(v2.A, #1625
SD SANDISK 15193MB Class0 <------- In Green Rectangle
Parition Info-v211v413
<------- In Blue Rectangle
USB <-------- In White Rectangle (When hooked up to my PC by USB cable. In this mode it installed drivers)
Note: In the middle of writing this, I saw it suggested here that this is a bootloader, so there should be a fix; http://forum.xda-developers.com/showthread.php?t=1161108
I think it's pretty clear what the question is here. How do I at the very least get this thing back to factory? Any help would be greatly appreciated. I'm no stranger to using programs to factory reset my phone, as I've soft bricked my LG Optimus One numerous and today it is running perfect on Cyanogenmod 9.
CodmasterRob said:
Hey guys, Google hasn't been as kind as ya'll are here, so I figured I'd give you a try. My mothers HTC HD7 failed to update via Zune a few months ago, and it has been stuck on the splash screen since (HTC with white background). So I took it from her since she now has an Android, and I'm looking to modify it. Upon booting into the hard reset mode, I do not get the actual recovery, I get a red, green, blue, and white screen. It reads as follows:
PD29110 SS-BC (4K) <------- In Red Rectangle
SPL-1.20.2250.0(111584)
MicroP(LED) 0x07
TOUCH S1(v2.A, #1625
SD SANDISK 15193MB Class0 <------- In Green Rectangle
Parition Info-v211v413
<------- In Blue Rectangle
USB <-------- In White Rectangle (When hooked up to my PC by USB cable. In this mode it installed drivers)
Note: In the middle of writing this, I saw it suggested here that this is a bootloader, so there should be a fix; http://forum.xda-developers.com/showthread.php?t=1161108
I think it's pretty clear what the question is here. How do I at the very least get this thing back to factory? Any help would be greatly appreciated. I'm no stranger to using programs to factory reset my phone, as I've soft bricked my LG Optimus One numerous and today it is running perfect on Cyanogenmod 9.
Click to expand...
Click to collapse
That is the bootloader screen indeed.
The good thing is that your bootloader isn't bricked or damaged.
More than likely during the update process the rom image was wiped or corrupted.
Try this first, download a stock/shipped specific rom for your device. Unzip all the contents (use a program like 7zip) to a new folder on your desktop.
Enter your device into bootloader mode and connect the device to your PC via USB cable. Device will change from "Serial" to "USB" click on the RUUwrapper (Rom Update Utility wrapper) in the folder and follow the prompts on the screen. That's it, should work and boot up.
I would recommend a stock/shipped rom that has a SPL of 3.xxx or under... That way if you want to install a custom rom your SPL doesn't have to be downgraded. To install a custom rom your SPL has to 3.xxx or lower, then you have to install RSPL/HSPL and the you can flash a custom rom of your choice.
If flashing the stock/shipped rom through bootloadet doesn't work then you'll need to use the goldcard/ Y cable method to flash the stock/shipped rom and then you can still install a custom rom. permitting your SPL is at or under 3.xxx
Here's a link to the stock/shipped roms -
http://forum.xda-developers.com/wiki/HTC_HD7/Shipped_Roms
Here's Shadow's tutorial on downgrading SPL, flashing XSPL and installing roms. It has all the links you'll need for the roms, goldcard/ Y cable method and everything you'll need -
http://forum.xda-developers.com/showthread.php?t=1295068
If you have any questions or need any help... Just let me know!
Thank you sir, you are indeed awesome. I'm going to try this tomorrow. I'm guessing SPL is the equivalent of a base band for an Android? I'm not familiar with Windows, but if I've got the similarities down I could figure it out relatively easy.
Sent from my LG-P509
Okay... I'm looking at the ROMs, and I have no clue which one I need. The phone is phone T-Mobile, so I'm sure TMOUS is the first part, but I have no clue what exact ROM I need. Any one will do?
CodmasterRob said:
Okay... I'm looking at the ROMs, and I have no clue which one I need. The phone is phone T-Mobile, so I'm sure TMOUS is the first part, but I have no clue what exact ROM I need. Any one will do?
Click to expand...
Click to collapse
Pretty much any TMOUS rom will work. Use this one though -
http://www.filefactory.com/file/cc8...9.25a_22.45.50.21_Signed_SCHUBERT_RELEASE.exe
The SPL on this one is 3.1 so after you install it and get the device booted, you can go to Shadow's tutorial and download RSPL and install it, download HSPL and install it and then download and install a custom rom. RSPL/HSPL and the custom rom are installed while in bootloader mode.