Hi,
I was thinking about upgrading my SGS to XXJPH, but as long as one of the apps I use daily on my device is vpnc (an ipsec vpn client), I'll need a tun module to make it work (well, obviously root & busybox are needed too).
Does this firmware come with built-in tun.ko, or should we wait for sources and compile one? Did anyone here test Openvpn or Vpnc on it?
Thanks!
Related
Hi Guys,
Im using JVK + the hacked Voodoo kernel from this thread (http://forum.xda-developers.com/showthread.php?t=975349) and it seems im missing PPP support now so my VPN tools that use Point-to-Point Protocol do not work. I have tried compiling the kernel modules myself but Ive had difficulty finding source code and config files that work.
What I need is to enable the following modules:
-PPP Support for async serial ports
-PPP Support for sync tty ports
Can anybody help me with this?
Thanks everybody, great help.
Sent from my GT-I9000 using XDA App
A nobody knows
or B you will have to wait for release of Gingerbread .
It has not yet been released .
jje
I dont know why its taking so long to release the source code. Seems to be the route of all my problems at the moment.
Attached tun.ko for 4.1.57. Works for me with VPNC. I put it in /system/lib and the VPNC Widget can load it.
awesome!!!! i was waiting for this to be able to connect to my cisco vpn!
great post!!!
Note: network connection tracking does not work
This means that after you connect to VPNC, disconnect from VPNC, turn wifi off, and then turn wifi back on, your connection will be hosed. As a workaround, you can run the VPNC widget settings pane and retoggle wifi. This resets the network state.
thx for this tread.good job
Thanks for shared! this file working well on 1.83 too
It's working perfectly on the Brazillian version of Atrix from Claro carrier.
I really wanted the possibility of compiling other modules for my Atrix stock kernel.
I really wanted to use some volume encryption functionality... As such a tool does not exist natively for Android, I`m thinking about using some kernel functinoality such as Loop-AES, LUKS, DM-Crypt or even some userspace FS for encryption (FUSE).
So, could anyone point me where i can find the source code for the Atrix kernel to try to compile those modules for it? I really think that this could be a great thing. One of the very fews things that i miss on Full Linux.
Thanls in advance.
victorhora said:
It's working perfectly on the Brazillian version of Atrix from Claro carrier.
I really wanted the possibility of compiling other modules for my Atrix stock kernel.
I really wanted to use some volume encryption functionality... As such a tool does not exist natively for Android, I`m thinking about using some kernel functinoality such as Loop-AES, LUKS, DM-Crypt or even some userspace FS for encryption (FUSE).
So, could anyone point me where i can find the source code for the Atrix kernel to try to compile those modules for it? I really think that this could be a great thing. One of the very fews things that i miss on Full Linux.
Thanls in advance.
Click to expand...
Click to collapse
Victor, are you using the stock kernel with this or did you need to recompile it?
I'm very sorry for the looooooooooooooooong delay in the answer.
And yes i was using on the stock kernel (Claro Brazil Android 2.2). Now i'm trying to use OpenVPN on the latest 2.3.6 official rom and it's not working anymore...
I'm thinking in some workround... any ideas?
Cheers.
victorhora said:
I'm very sorry for the looooooooooooooooong delay in the answer.
And yes i was using on the stock kernel (Claro Brazil Android 2.2). Now i'm trying to use OpenVPN on the latest 2.3.6 official rom and it's not working anymore...
I'm thinking in some workround... any ideas?
Cheers.
Click to expand...
Click to collapse
The tun.ko module doesn't work, I was going to compile one for 2.3.4 (at least the stock kernel) but it seems my desktop killed itself, and I'm not going to install linux on my laptop (it seems to suck with booting from CD, and USB doesn't work... no idea why, but it works fine with Windows Discs)
Might consider using Faux's kernel, it has TUN/TAP (I've never tested though)
Hi,
I have a bluetooth keyboard - IGO Stowaway XTBT01, and have successfully used this with CM7 and some older Samsung Stock roms in the past. I was hoping to use this on ICS but have not yet found an ICS combination of ROM and Kernel which work.
None of the recommended apps from market worked for me even though the keyboard pairs and sometimes (but most of the time doesn't say) 'connect to HID device'. But even with this, the keyboard doesn't work.
After flashing multiple kernels on top of JW1/JVZ and others to test this, I found that CF ROOT always works perfectly (maybe due to the fact that this is close to stock kernel?) and all of the other kernels do not work for me that I've tried (eg., Semaphore, Speedmod and others). I did notice that for kernels like Semaphore there are many options one can choose in the tweaks but I'm not sure if this willl improve the compatibility (eg., CIFS, TUN support and others--I don't know what these mean).
Does anyone know if there is a way to get the kernels such as Semaphore or Speedmod, etc. to work with this Bluetooth HID device? Are there settings to change you're aware of? I do miss the benefits of kernels like semaphore (speed+batt life+ color+sound) offer but am not sure if it's possible to get them working with this. Any thoughts appreciated!
Cheers,
CM10.1/Stock works
I know it's been a while and JB is out now, but wanted to leave a stick in the sand for future users. Here's my experience with JB:
CM10.1 nightlies (the recent 4.2.2-based ones) seem to work fine for me with the stock kernel. Switching in other kernels (tried Semaphore and Devil) seems to break the HID in the manner you described (pairs correctly, but no connection thereafter). I'm sticking with CM10.1 for the moment but investigating workarounds.
Update
Checked the logcat after one of these pairing failures on Semaphore, found this error:"Failed to open uhid, err:No such file or directory". Looking into this...
Hello,
I'm looking for module for my GT-P7320 to be able to mount remote drives, if I'm not mistaken my GT needs only cifs.ko. Does anyone already compiled it?
I couldn't find it anywhere... As I have heard P7320 model is not that popular yet thats why there isn't much custom roms nor modules
If no one have this module compiled already, could someone at least give me a hint how to compile it? (i will share it afterwards of course )
just in case additional information:
model number: GT-P7320
Baseband version: P7320XXLB3
Kernel version: 2.6.35.11-perf [email protected] #2
Thanks in advance
Stigi
I found this for the Acer A500, but it's for kernel 2.6.36.3, worth a try I guess
http://forum.xda-developers.com/showthread.php?t=1058713
I have the P7300 and used this one http://forum.xda-developers.com/showthread.php?t=1468498 from the GT 10.1 forum. Also I used ES File explorer in stead of the Android SDK to create the folders and copy in the file.
Hope this helps.
thanks for the replay, but none of this works with my GT :/ just in case tried all of above (I'm kinda desperate) with no luck.
As far as I know none of P7300/P7310 modules will work with P7320 because it have different source or sth like that.
EDIT: oh and I'm trying to load this module using insmod and I'm getting "Exec format error", I assume that its coz of a difference in kernel, right?
Hi folks.
Do you guys know if there is a way to make possible use of AdHoc wifi Networks on any ICS Rom?
Actually i was using Kingdroid and I was very satisfied.
But, AdHoc Enalber doens't seems to work on any ICS rooms actually.
Also if it is not possible via apps or something like this, would it be possible to revert the driver only? I guess any driver from GB could work.
Thanks anyway
Best regards,
Marcus.