I can't, suddenly, even after uninstalling and reinstallimg, get my bars to go to anything other than a min and Max of 768
I know my phone does not do well on 768
Any ideas?
Sent from my HERO200 using XDA App
Try clearing your dalvik cache this happens to me sometime after flashing an update on cm6, even when I was one 690 settings.
ASimmons said:
Try clearing your dalvik cache this happens to me sometime after flashing an update on cm6, even when I was one 690 settings.
Click to expand...
Click to collapse
I chose 'show other frequency sets' and set it that way, then went back to the other option and everything worked...in case that happens to anyone else
Sent from my HERO200 using XDA App
Related
Okay i installed froyo 2.2 on my phone about 2 months ago and at first it ran good. And now sometimes when i hit the home button it lags and then shows my background but nothing else then after a minute all my stuff comes back on the screen. How do i fix this its very irritating.
Sent from my SAMSUNG-SGH-I897 using XDA App
Is it behaving this way after a restart too? Are u using any task killers/battery managers?
Also, just using "froyo 2.2" does not convey much info. It would be better to mention any custom/kernel u r using. It could be also because u r using underclocking with undervolt that is limiting cpu using its full speed.
U could try clearing out dalvik cache from recovery mode, and check if that speeds it up. Be mindful that after clearing dalvik cache the first boot would always take more time since it has to recreate the same.
Yeah it does it after i restart it. I'm using froyo 2.2 kernal [email protected]#1, i'm using advanced task killer but thats it.
Then I would say do some research and flash a custom kb1 kernel. There is a few with lagfixes and even overclock capability.
When i inatalled froyo it up rooted my phone
Sent from my SAMSUNG-SGH-I897 using XDA App
does anyone else have this problem? i flashed Continuum 4 and i went to restore my apps and it takes FOREVER to restore the first app (Wolfroid). it doesnt move any after 10 mins and i uasally quit and try again. help please and Thank You>
kant5t1km3 said:
does anyone else have this problem? i flashed Continuum 4 and i went to restore my apps and it takes FOREVER to restore the first app (Wolfroid). it doesnt move any after 10 mins and i uasally quit and try again. help please and Thank You>
Click to expand...
Click to collapse
Have you tried enabling android debugging? Had the same issue before.
ya its enabled. it work for a little bit now it hangs at one app so i repeat and try again. i really am clueless here
kant5t1km3 said:
ya its enabled. it work for a little bit now it hangs at one app so i repeat and try again. i really am clueless here
Click to expand...
Click to collapse
How about deleting the app data and force closing it? maybe unistalling it?
Sent from my cappy UC'd 900mhz and UV'd running serendipity 6.4/ Onix kernel
This happens to me every once in a while, all I do is force close TiBu and do it again and it usually willing work
Sent from my SGH-I897 using XDA App
this also happened to me on the same rom. i have no idea what the davlik cache does, but i find that whenever i delete it from cwm it fixes issues. doing this fixed the issue of taking forever to batch install my backups.
i tried wiping the dalivick cache in recovery and still hangs
Try enabling USB debugging should work fine
Sent from my GT-I9000 using XDA Premium App
I got a brand free Incredible S, received the update message a week ago and accidently declined it. Now when I check for updates I get "already up to date". My current android version is still shown as 2.2
Maybe try do a factory reset and then check for the update again.
Try clearing the data/cache from the settings app
Sent from my ADR6400L using XDA App
krickatthedisco said:
Try clearing the data/cache from the settings app
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
Could you give me a little description how to do that?
I'm currently in school and can't check that for myself.
Okay, clearing the System App cache didnt work. Any other solutions? I don't want to do a factory reset, cba to install everything again..
phLiix said:
Okay, clearing the System App cache didnt work. Any other solutions? I don't want to do a factory reset, cba to install everything again..
Click to expand...
Click to collapse
If nothing works out, get 'MyBackup' from market ... it allows you to back up all data + APK s on ur phone, then do a factory reset and try to bring up the update ...
after which u can restore ur data / APK s ... ( u need to download 'MyBackup' again )
This is just a last resort workaround
Or I just cleared the cache wrong. I'm a completely Android Noob so someone could explain me how to do so?
No one?
Sent from my HTC Incredible S using XDA App
I am pretty sure it is because of all the bugs the update had!
For example WiFi automatically disconnects when signal is less then -88dBm.
Font size is to big.
And more.
phLiix said:
Or I just cleared the cache wrong. I'm a completely Android Noob so someone could explain me how to do so?
Click to expand...
Click to collapse
Settings>> Applications>> Manage applications >> 'All' tab >> Scroll to settings application >> *Click* >> Cleat Data / Cache
Done
For everyone with the same Problem, the HTC support says that the notification comes back within 14 days.
My Settings app hadn't any cache data BTW.
Sent from my HTC Incredible S using XDA App
I'm having some random reboots when using Juice Defender or Green Power.
They work fine but at random, when they enable 3g/wifi the phone will reboot. It becomes quite annoying....does anyone have this issue or a solution?
anyone?...........
Been using JD for ages, and have never experienced any problems (aprt from having to restart it manually after flashing new kernel).
I use JD Plus, can send you my settings if you like.
What ROM/Kernel you using?
Have you tried re-installing and/or restoring it?
Have you tried fixing your permissions? Clear your cache too.
Sent from my GT-I9000M using XDA App
gsw5700 said:
Been using JD for ages, and have never experienced any problems (aprt from having to restart it manually after flashing new kernel).
I use JD Plus, can send you my settings if you like.
What ROM/Kernel you using?
Have you tried re-installing and/or restoring it?
Click to expand...
Click to collapse
Stock JVR + CFRoot for right now. I have used both Galaxian and Semaphore and both get reboots.
Getinaf said:
Have you tried fixing your permissions? Clear your cache too.
Sent from my GT-I9000M using XDA App
Click to expand...
Click to collapse
I did a factory reset/wipe cache/dalvik but havent loaded JD or GP back yet.
Hi, I'm having a problem with my Touchpad 32GB. I'm having problem with the CM9 2012/11/18 build. I've installed it, but after a few minutes of use, it resets on me. I've done it a few times, same problem. I've restore it back to webos 3.0 using this page http://forum.xda-developers.com/showthread.php?t=1426244 and I've tried installing it again, but I still get the same problem.
The files that I have in the cminstall folder when I started are:
moboot_0.3.5
update-cm-9-20121118-NIGHTLY-tenderloin
update-cwm_tenderloin-1012
And when I run the novacom command, I'm using the ACMEInstaller2.
Can someone help me with this problem? Also, on a side note, which version of Android would be most stable?
Thanks in advance for any help.
vdn20 said:
Hi, I'm having a problem with my Touchpad 32GB. I'm having problem with the CM9 2012/11/18 build. I've installed it, but after a few minutes of use, it resets on me. I've done it a few times, same problem. I've restore it back to webos 3.0 using this page http://forum.xda-developers.com/showthread.php?t=1426244 and I've tried installing it again, but I still get the same problem.
The files that I have in the cminstall folder when I started are:
moboot_0.3.5
update-cm-9-20121118-NIGHTLY-tenderloin
update-cwm_tenderloin-1012
And when I run the novacom command, I'm using the ACMEInstaller2.
Can someone help me with this problem? Also, on a side note, which version of Android would be most stable?
Thanks in advance for any help.
Click to expand...
Click to collapse
I use the 11/18 nightly and it works fine for me.
Take a look at this thread:
http://forum.xda-developers.com/showthread.php?t=2002968
It could help with your rebooting problem. I've been lucky, never have had that problem.
Make sure if you doctor back to 3.0.0 to update to 3.0.5. You can do it OTA.
Good luck.
chicle_11 said:
I use the 11/18 nightly and it works fine for me.
Take a look at this thread:
http://forum.xda-developers.com/showthread.php?t=2002968
It could help with your rebooting problem. I've been lucky, never have had that problem.
Make sure if you doctor back to 3.0.0 to update to 3.0.5. You can do it OTA.
Good luck.
Click to expand...
Click to collapse
Okay, I'll give that a shot. I'm curious, can you tell me which version of ACMEInstaller did you use? Thanks
Update:
Playing a sound didn't seem to work. There were some sounds played when I tap a button, but I also played a music button to be sure, but it still restarted on me after a few minutes.
Update 2:
I've restore my touchpad hopefully back to the way it was when I got it. Can someone give me some direction on what to use to install Android, hoping what I originally done caused some kind of problem.
I used acme installer 2.
I recommend using ACMEInstaller3. It will be necessary if you ever want to install Jelly Bean, so might as well do it now.
chicle_11 said:
I used acme installer 2.
Click to expand...
Click to collapse
bananagranola said:
I recommend using ACMEInstaller3. It will be necessary if you ever want to install Jelly Bean, so might as well do it now.
Click to expand...
Click to collapse
Tried using both during the install, but both gave the same problem. Any other ideas on what I can try?
vdn20 said:
Tried using both during the install, but both gave the same problem. Any other ideas on what I can try?
Click to expand...
Click to collapse
What are your min/max clock settings set to?
Sent from my ThunderBolt using xda premium
I'm wondering, does it freeze or get jittery before it shuts off, or does it just turn black and die
Sent from my SAMSUNG-SGH-T989 using xda premium
rrrrrrredbelly said:
What are your min/max clock settings set to?
Sent from my ThunderBolt using xda premium
Click to expand...
Click to collapse
I'm not sure what the min/max clock settings are set to. How can I check?
-SGA- said:
I'm wondering, does it freeze or get jittery before it shuts off, or does it just turn black and die
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
After a few minutes of use, it freezes for a moment, and then it resets.
vdn20 said:
I'm not sure what the min/max clock settings are set to. How can I check?
Click to expand...
Click to collapse
I dont remember where the setting is on CM roms, but if you go into settings, then they should have a cyanogenmod setting option, then performance I think. The min clock CPU speed is 192 I believe, I can't run anything below 384, and on some rom's I have to set the min at 432 or it will randomly reboot. Not saying this will solve your issue, I was just curious what your speeds were set to.
You can also use an app from the play store, such as kernel tuner or no frills cpu to set your speeds.
rrrrrrredbelly said:
I dont remember where the setting is on CM roms, but if you go into settings, then they should have a cyanogenmod setting option, then performance I think. The min clock CPU speed is 192 I believe, I can't run anything below 384, and on some rom's I have to set the min at 432 or it will randomly reboot. Not saying this will solve your issue, I was just curious what your speeds were set to.
You can also use an app from the play store, such as kernel tuner or no frills cpu to set your speeds.
Click to expand...
Click to collapse
Just reinstalled CM9 on it using ACMEInstaller3. The min/max is 384/1188 MHz. This time, it was a little different. A few minutes in, I tried to turn on the WiFi and the screen gone blue. I restarted it and and up the CPU speed. It restarted in a few minutes, last longer this time. I wiped the both cache and did a fix permission, saw it in another post, and it restarted within the first 2 minutes after it boots into CM9.