Related
Upon reading the title you probably entered ready to flame me for not using the search button. The reality is though, that is just one of my many problems I'm having. I'll start from the beginning, give you the whole rundown and hopefully you can help, because if I can't figure this out soon I'm going to start smashing things, my G1 being first on the list.
A couple of days ago i was just surfing around, heard about custom ROMS, rooting, etc. so I started my journey. Thinking this would just take an afternoon, at the max, was a mistake on my part. I started here:
[ROM]TheOfficial TMO (US/EU) & HTC ADP - CRC1- Rooted [8/17/09]- v1.5.2-SecurityPatch
Looking at the prerequisites, I realized I lacked both the requirements so I followed that threads link to here:
Easiest How To for: Root, Hero, Recovery, Partition (no computer), etc. READ FIRST!!
I was able to complete up to step 7, but 8 posed a problem.
When trying to sync my google account to the phone it gave that old message we all know and love from when the G1's were just released. The one where it tells you: "There is a problem communicating with the Google servers. - This could be a temporary problem or your SIM card may not be provisioned for data services. If it continues, call Customer Care."
At first, I thought maybe it was because I had horrible service in my house, ranging anywhere from 0-2 bars. Thinking I could easily fix the problem by walking up the road to get 4 bars, that's what I did. Still having trouble communicating with the servers. It's obviously not server overload like they tried to say at launch and it can't be I don't have data services because I've been paying and using them for about 9 months now. So I set off to the internet for a fix. I came across this:
[How To] Activation over Wifi
Reading the first sentence, it told me to set up ADB. So I went here:
Setting up ADB
But, I obviously couldn't complete the steps listed because I can't set my phone to debugging mode with out it being activated. So I went back to the Wifi act. page and scrolled down to find this:
[How To] Activation over Wifi (12th Post)
Following the first step, I typed <enter>reboot<enter> and nothing happened.
This, obviously, confused me very much. Because, did I not just wipe my whole phone and install rc29?
But I disregarded it, putting it to the side as a fluke and hoping the rest would work anyway, because at this point I just wanted things to start working.
I went to step 2, but once again I can't do that because I don't have access to the phone settings.
But I just continued.
Upon trying to complete step 5, I was just pissed... This seems like a never ending road. Of course, my phone had to be wrong and show up as a USB mass storage device. So I followed the steps, but I don't understand part D in step 5 because it only gives me one choice on the list which is USB mass storage device. After this I started trying everything, uninstalling that driver, turning of PnP, just about everything I could think of.
If someone could just help me, even a little, I would be so very happy.
If you need any info at all just, pictures, build info, w/e I/'ll have it to you as soon as I see your message. If you don't understand something I said, ask right away and I'll answer. Thank you so much in advance lol
Mind you, I've tried all these guides a couple times over, I've tried different guides and I've installed rc29 3 times now. Still no luck
I'm confused....
I have a few questions before we start you on the journey to getting you rooted.
Firstly, am I understanding things correctly when I assume that you have already flashed DREAIMG.nbh (RC29) onto your phone and can't get past the setup screen?
Secondly, you say that you have data service, but then say that you didn't have enough "bars" so you headed up the street for more "bars". Are you sure you have data service because the bars on the phone have to do with cell reception and have nothing to do with data service.....
Thirdly, are you on 3G or EDGE in your area?
If you do indeed have a data plan for sure, then other than a crappy 3G or EDGE signal, there really shouldn't be a reason for the error message your getting other than google's servers might actually be experiencing difficulty. No way to know for sure.
If/when you are able to get past the login screen to root, go to this link
http://forum.xda-developers.com/showthread.php?t=548924
instead of Easiest How To for: Root, Hero, Recovery, Partition (no computer), etc. READ FIRST!!
its recently updated, and easier to follow.
I have bad service...
Yes, after flashing RC29 onto it I can't hook my google account up to my phone. I've got EDGE in my area, checking t-mobile's service map though I found that it's really bad right where I live. Until I can head out to somewhere with some good service any ideas on how to get he wifi act. to work?
KingTasty said:
Yes, after flashing RC29 onto it I can't hook my google account up to my phone. I've got EDGE in my area, checking t-mobile's service map though I found that it's really bad right where I live. Until I can head out to somewhere with some good service any ideas on how to get he wifi act. to work?
Click to expand...
Click to collapse
If you cannot get adb working properly, then you cannot use JF's method to bypass the signin screen therefore you just have to wait until you can get to a better service area.
Your two choices are: bypass the signin screen or sign in over the network. You can't sign in over the network as previously stated by you, and you cannot bypass the signin screen because you can't get adb working. There is no way to setup wifi within android if you are stuck at the signin screen
but wait?
There must be someway to activate ADB, because if there's not then isn't a guide activating through wifi pointless?
KingTasty said:
There must be someway to activate ADB, because if there's not then isn't a guide activating through wifi pointless?
Click to expand...
Click to collapse
There are plenty of guides on how to get adb working... its just so happens that you reported that you can't figure it out. If you can't figure it out and get it working, then you can't use the sign in screen work around as outlined in JF's post.
The very first step in JF's work around is
You have to connect to your phone with adb shell and get root access, and then type the following command:
Click to expand...
Click to collapse
Since you can't do that, you can't do the work around. Try reading up more on adb and see if you can get it working.
Couple questions
I've basically fixed all the problems I was having that needed to be fixed to use ADB except for one. According to every guide I need USB Debugging enabled, My questions is how did others achieve this with being activated?
OMG help me too i have the same problem !!!
KingTasty said:
I've basically fixed all the problems I was having that needed to be fixed to use ADB except for one. According to every guide I need USB Debugging enabled, My questions is how did others achieve this with being activated?
Click to expand...
Click to collapse
I know for a fact there that I saw some terminal command not too long ago to be able to activate usb debugging from the command line. I can't for the life of me remember where I saw it, but if you can be patient, I may be able to find it eventually.
florevil said:
OMG help me too i have the same problem !!!
Click to expand...
Click to collapse
Just keep checking back here and see where we get, hopefully we can figure it out.
@DirectMatrix:
The command is <enter>setprop persist.service.adb.enable 1<enter> and you enter it in your phone, but that only works with RC28 I think. Or does the RC29 have the hidden shell also? The reason I'm thinking it doesn't is because when I type <enter>reboot<enter> nothing happens. The only things I can think of is that I'm on the wrong screen when typing or the RC29 I'm using is messed up.
I'm on the very first screen when registering, where the it says touch the android to begin. btw, thanks for all the help so far
KingTasty said:
Just keep checking back here and see where we get, hopefully we can figure it out.
@DirectMatrix:
The command is <enter>setprop persist.service.adb.enable 1<enter> and you enter it in your phone, but that only works with RC28 I think. Or does the RC29 have the hidden shell also? The reason I'm thinking it doesn't is because when I type <enter>reboot<enter> nothing happens. The only things I can think of is that I'm on the wrong screen when typing or the RC29 I'm using is messed up.
I'm on the very first screen when registering, where the it says touch the android to begin. btw, thanks for all the help so far
Click to expand...
Click to collapse
RC29 has the hidden shell also which is what allows the telnetd command to be entered to start the rooting process. It sounds like when you enter the reboot command at the welcome screen you should be getting a reboot because you said you installed RC29. It also sounds like your doing the commands in the correct spot but just to recap, you should be at the "touch the android to begin" screen, once there, just slide out the keyboard, hit enter, type reboot, hit enter again and the phone should reboot.
What happens if you keep trying to follow JF's guide even though you can't get the reboot to work? Have you made any promising progress with steps after the A few tips and tricks section?
I flashed it again, and reboot works now. I don't know what was wrong before. I'll try the "setprop persist.service.adb.enable 1" again. Just to be clear, after typing that nothing happens right? and I'll go check the tips and tricks.
KingTasty said:
I flashed it again, and reboot works now. I don't know what was wrong before. I'll try the "setprop persist.service.adb.enable 1" again. Just to be clear, after typing that nothing happens right? and I'll go check the tips and tricks.
Click to expand...
Click to collapse
Glad to hear it and yes, your right, nothing that you can see will happen. Essentially what it is doing is executing the command behind the scenes same as would happen if you were to hit the check box next to usb debugging if you were able to.
The way you will see if it worked is you should be able to open up a command prompt assuming your a windows user and type:
Code:
adb devices
You should see a device listed something like HT.........
Lemme know if you have anymore problems
Still nothing.
I tried but I don't think it worked, but it may have. The problem could be my drivers so I followed this.
"Im not getting a notification of Android ADB when i plug in my USB"
Why: Your computer has detected your phone but as a protable device and as a storage device.
Fix: This took me a lot of research and time to figure out so this is what your are going to do.
First download USBDeview - Here
Unzip it
Run USBDeview.exe as Administrator
You will see all drivers being used on your computer
Highlight and Uninstall all drivers with the description have HTC Android (Should be 3 of them)
Right Click on the driver and press uninstall
Once done, Unplug your phone and plug it back in
You should now get the notification of the ADB device
Follow the steps above to install the drivers
Click to expand...
Click to collapse
I did that but every time I plug my g1 back one it makes a new one, calling it USB Mass Storage Device. I keep deleting it but it keeps coming back every time.
Here's what I got in cmd.
Code:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Tyler>cd C:\android-sdk-windows-1.5_r3\tools
C:\android-sdk-windows-1.5_r3\tools>adb devices
List of devices attached
C:\android-sdk-windows-1.5_r3\tools>adb shell
error: device not found
C:\android-sdk-windows-1.5_r3\tools>
I'm not really sure what to do now... I guess I keep trying to see if it'll work. Meanwhile, what do you think?
King,
PM me your contact info and I'll try to troubleshoot this with you. I did it the old fashion way without any programs and I think I remember my steps so I just have to walk through it again.
You could also try this adb tutorial, thats the one I used and would use if I were to walk you through it.
http://forum.xda-developers.com/showthread.php?t=502010
Alright yeh, sounds good.
Gimme like 20 min, I'm gonna go grab something to eat quick.
Take a look here though, I uploaded what re appears every time I plug in my g1. Something must have been turned on or changed be cause now 3 new drivers appear every time instead of just one.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But still no luck in cmd, so something is still wrong...
Hi! I have the same problem too. There're a lot of tutors online but they are just copy and paste from each others. I did pass by the first time via wifi when I root my G1 but cann't the second time rooting my girlfriend's.
The USB driver that window or HTC using before works on vista and only see the device as ADB composite deivce, but not anymore, Windows now recognized the devices as ADB composite device AND mass storage. I don't know about XP. and don't know what to do about it
I think that's why I can not enable ADB on G1 by typing "setprop....enable 1"
Anybody help? Offering your Tmo SIM card for 5 mins? I am at Dallas. Txt [email protected] #469-759-9897 Really need it PLZ
I guess this is obvious but I just want to clarify: Everytime you flash the rom you need to re-activate the phone? Or is activation only a one time requirement?
I just purchased a used, tmobile g1 (from the US) and am hoping to root it and flash SuperD's wrong as soon as I get it. However, the problem is I obviously don't have a Tmobile SIM and I don't have a data connection on my local sim card.
Do I have to go through these ADB steps to activate the phone? Thanks!
my g1 was DRC92, I managed to downgrade with not too much effort (the <enter>reboot><enter> works) now when it came to starting up it asked me to input my g mail details. Did this but couldn't sign on thanks to no wifi.
After days of messing about (most of the time spent in adb) i'm giving up and posting for help. ADB always says offline so i cant do anything with that i have no other lead to try and have tried 2 computers.
I don't know anyone with Tmobile so cant borrow a sim.
I did manage to get GPRS up by pressing menu on the signin screen then deleting all the APN's but t-mobile uk then changing that to my networks (o2) details the Symbol pops up and i get the arrows like data is being transferred but i get the error signing in. is it not allowed to let me sign in on 02? is there something not allowing me to sign in on o2? I'm really stuck and have been trying for 2 days done LOADS of research but nothing so far has helped.
Its not rooted (just got it so not 100%) is there anything i can do to bypass this screen as i have tried a lot even putting a custom rom would be fine with me if someone can link me to one that lets me avoid signup but again not too sure if i can install it if i need to be rooted...
Thanks for any help its much appreciated.
Wouldnt you know it as soon as i post gmail lets me sign in problem solved. Thanks for looking maybe custom apn settings will help others that cant do the adb thing?
I'm in the same position as you. Only i'm on 3.
I took my G1 back to 1.6 so that i could flash to Cyanogen6 and i stuck on that screen (as it claims no connection could be made).
Is there any little things you did? Been half a day like this now.
And i also can't get ADB to work. It see's my phone, but claims "This device cannot start. (Code 10)"
EDIT: Read the details on APN setups and i have 1.6 working! Thanks man! Owe you one
Glad it helped, I actually did the whole APN thing as soon as i got the phone so i should have remembered but i have a really sucky memory :/
Anyway this should save people messing about enabling wifi and such through adb Glad it helped it will save someone else a lot of messing about too i hope
Hey everyone, I just recently got a Samsung Captivate with Rogers, which is the i896.
I've been hearing a lot about rooting lately and i'm starting to understand a little more about what it is exactly. I'm interested in the idea that it can help speed up the phone and allow for more apps, but I have a few questions.
1) Where can I find the most recent way to root a ROGERS Captivate? I was reading around and read that the "One click fix" does not work anymore
2) Will rooting my phone change the interface of the phone?
3) If something goes wrong and my phone doesn't root, can I go back to the default settings easily?
I might have more questions later on but thats it for now. I'd just also like to hear your opinions on rooting and what exactly YOU have been able to do with your phone by rooting.
Thanks!
welcome ill answer your qs first then ill give you some links to help you out
A)rooting and flashing roms (2 diff things) are easiest done from STOCK 2.1 (which you should have) if you plan on flashing custom roms DONT do the rogers/samsung keis firmware update. it changes the recovery to 3e. (ink below if needed)
B) rooting does not change the interface. ROMS DO
C) if you cant successfully root, nothing has changed. you should be able to tho. and you can UNROOT, and wipe to factory too. for warranty repairs and they will never know.
OPPINION:
custom roms are the way to go, more current, full featured complete and on time, cutomizable, fun, and brain-power using than stock roms.
MY ADVICE: DO IT but TAKE YOUR TIME AND READ. I READ FOR 3 or 4 days before i touched a thing!! and still had very minor issues and things that had to be ironed out. dont let that scare you. its a learning experience. hopefully with the links i give you you will have less SEARCHING TO DO. but you my freind, are in the right fourm and right section, too! i have a good feeling about you already!
YOU CAN DO IT WATERBOY!!!
LINKS!!!!
http://forum.xda-developers.com/showthread.php?t=858765 start here.
http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/SGH-I896 i896 specific crap but see i897 page too, same phone same guts (see rooting, hell read the whole thing)
http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/SGH-I897 i897 wiki
http://forum.xda-developers.com/showthread.php?t=872455
http://forum.xda-developers.com/showthread.php?t=905042
http://forum.xda-developers.com/showthread.php?t=909213 (3e recovery if you run into that)
oh and it took me forever to learn that there is an ODIN one-click, and an Odin3 1.7, both flashing programs but DIFFERENT, we can use ODIN one-click but not recomended it flashes AT&T stock back. ALSO not to be confused with one-click ROOT,,,
Typically its best to read around but you can use the following for rooting and unrooting
It doesn't change the interface
http://forum.xda-developers.com/showthread.php?t=803682
I used it, no issues and now with a new ROM as well - you will stumble on many thing but this site has everything but u need to read a bit
Hey there, the rogers captivate is the same as the at&t captivate. I found a rogers phone in the snow, wiped, rooted and unlocked it. Installed at&t firmware and then flashed serendipity. I'm using it on telus no problem. Everything in this captivate forum will work great.
Sent from my SAMSUNG-SGH-I897 using XDA App
First of all, thank you guys so much for giving me real replies instead of a bunch of "Go read for yourself" or "try the search button" lol... I've been doing some reading but I needed to ask a few direct questions.
@Trusselo, i'm not too ignorant to computers. I know my way around a computer and used to do some web design and basic coding so i'm somewhat okay.
My only concern is that once i've rooted my phone, I have to use some sort of unix/linux commands to work around my phone and do things? Is this true? Also, I read that the rooted version has a different keyboard? I still have a hard time getting used to this touchscreen board.
SIDE QUESTION ABOUT CAPTIVATE AND WIFI: This is my biggest problem right now, its actually a small problem but it gets annoying. Basically, my WiFi stays connected when i'm at home but sometimes it seems like it slows done or the connection lags or even stops working. I can usually tell if this is happening because pages don't load fast enough in the browser or don't load at all. While this is happening, my wifi connection still says "Connected" though. I always have to go back, disconnect, re-type my password, connect again. Then I go back and it works fine. Is there any way to fix this?
gs1003 said:
First of all, thank you guys so much for giving me real replies instead of a bunch of "Go read for yourself" or "try the search button" lol... I've been doing some reading but I needed to ask a few direct questions.
@Trusselo, i'm not too ignorant to computers. I know my way around a computer and used to do some web design and basic coding so i'm somewhat okay.
My only concern is that once i've rooted my phone, I have to use some sort of unix/linux commands to work around my phone and do things? Is this true? Also, I read that the rooted version has a different keyboard? I still have a hard time getting used to this touchscreen board.
SIDE QUESTION ABOUT CAPTIVATE AND WIFI: This is my biggest problem right now, its actually a small problem but it gets annoying. Basically, my WiFi stays connected when i'm at home but sometimes it seems like it slows done or the connection lags or even stops working. I can usually tell if this is happening because pages don't load fast enough in the browser or don't load at all. While this is happening, my wifi connection still says "Connected" though. I always have to go back, disconnect, re-type my password, connect again. Then I go back and it works fine. Is there any way to fix this?
Click to expand...
Click to collapse
Just rooting the phone does not change the interface at all. Rooting just allows you access to the locked system files so you can change them.
Also you won't have to use terminal commands to do hardly anything, but it would be a good practice to learn how to use it.
From there you can change your keyboard if you like. There are a few keyboards out there that are better than the stock keyboard is, as far a functionality.
Be warned once you get onto flashing and modding your phone, its like an addiction, and you probably wont be able to stop.
thatguysteve said:
Hey there, the rogers captivate is the same as the at&t captivate. I found a rogers phone in the snow, wiped, rooted and unlocked it. Installed at&t firmware and then flashed serendipity. I'm using it on telus no problem. Everything in this captivate forum will work great.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Did you try and find the actual owner first?
Keithyv` said:
Did you try and find the actual owner first?
Click to expand...
Click to collapse
Ya, but no one called the phone. The screen was locked and I couldn't get into the phone. I think it was outside for a while, reported lost and deactivated.
Sent from my SAMSUNG-SGH-I897 using XDA App
gs1003 said:
@Trusselo, i'm not too ignorant to computers. I know my way around a computer and used to do some web design and basic coding so i'm somewhat okay.
My only concern is that once i've rooted my phone, I have to use some sort of unix/linux commands to work around my phone and do things? Is this true? Also, I read that the rooted version has a different keyboard? I still have a hard time getting used to this touchscreen board.
SIDE QUESTION ABOUT CAPTIVATE AND WIFI: This is my biggest problem right now, its actually a small problem but it gets annoying. Basically, my WiFi stays connected when i'm at home but sometimes it seems like it slows done or the connection lags or even stops working. I can usually tell if this is happening because pages don't load fast enough in the browser or don't load at all. While this is happening, my wifi connection still says "Connected" though. I always have to go back, disconnect, re-type my password, connect again. Then I go back and it works fine. Is there any way to fix this?
Click to expand...
Click to collapse
i really hope that you didnt think i was accusing you of not being good with computers or being patronizing, i was just trying to provide you (or anyone else that reads this) with as much info as i could, while not doing the work for you.
terminal commands: ive never had to use them, no adb shell, no terminal emulator on phone, although it wouldnt be outside of my skill, i just prefer to do it without learning something i dont need to. (yet.. still thinking about learning some apping)
keyboard: rooting does not change any part of the UI at all, all rooting does is allow you to access (read / write / copy /delete) protected system files. And you can only do those scary things with use of other root apps after rooting your phone.
wifi: this is why some people flash new modems, if you still have issues and really want to send it back for warranty, dont worry, you can have it back good as new in no time!
Not too sure what you mean by flash new modems... ? And I wasn't accusing you of anything lol. Just letting you know that i'm not 100% dumb when it comes to computer but even then I don't know if I would be ready to use typed commands and stuff to use my phone.
gs1003 said:
Not too sure what you mean by flash new modems... ?
Click to expand...
Click to collapse
The modem is simply what the phone uses for connectivity. It is a separate piece of the firmware that can be flashed on its own. It is a topic that is a little beyond the scope of this post. However, there is a stickied thread in the Captivate development forum called 'the modem thread' that outlines a lot of the information. The main reason many people do this change is that some experience better connectivity, lower battery consumption, and some other benefits. Again modems are beyond the scope of this post, so I encourage you to read that sticky, as there can be some pitfalls to changing modems. Best of luck and enjoy the great phone!
Oh okay thank you. I thought you meant I would have to take my phone back and get a new one. The WiFi works fine, its just that I have to disconnect, enter my wifi password, then reconnect sometimes for it to work properly.
Do you mean that the WiFi is something that can be changed after the phone is rooted to work better?
Can't say for sure, but it's always worth rooting anyway.
Sent from my SAMSUNG-SGH-I897 using XDA App
Hi there,
I have a stock Captivate. I patiently waited for the Froyo update because I didn't want to do anything that might void my warranty that I'm paying for every month.
Very, VERY long story short: I believe my phone is has been "soft bricked" - that's a term I found on here after reading countless hours worth of posts. I've got the phone--!--cpu thing, can get to the download screen, but the Kies Mini won't recognize my phone in emergency recovery mode. My computer recognizes it *sometimes*.
I followed the official Samsung update directions to a T, but Kies is garbage and it booted me out of the installation and left my phone screwed up. I've tried using two different computers (Win7, a 32-bit and 64-bit) and three different stock USB cables. I've turned off firewalls and uninstalled IE9; basically, I've tried everything I could find while searching for about 10 hours. 0_0
So, I'm over it. I know that AT&T will be useless to me so I'm just going to try to fix it myself. I've installed Odin3 and would like to get my phone working again. Luckily I saved my pics and contacts, so I can live with a fresh start. The question is, which version do I "flash" (I hope I used that term correctly)? I consider myself tech savvy but there are a million versions floating out there and I don't want to screw up my phone any more than it already is. Apologies if this is easily found somewhere else, but I did read a ton of FAQ pages and am still not comfortable picking out something to download.
thej0nes said:
Hi there,
I have a stock Captivate. I patiently waited for the Froyo update because I didn't want to do anything that might void my warranty that I'm paying for every month.
Very, VERY long story short: I believe my phone is has been "soft bricked" - that's a term I found on here after reading countless hours worth of posts. I've got the phone--!--cpu thing, can get to the download screen, but the Kies Mini won't recognize my phone in emergency recovery mode. My computer recognizes it *sometimes*.
I followed the official Samsung update directions to a T, but Kies is garbage and it booted me out of the installation and left my phone screwed up. I've tried using two different computers (Win7, a 32-bit and 64-bit) and three different stock USB cables. I've turned off firewalls and uninstalled IE9; basically, I've tried everything I could find while searching for about 10 hours. 0_0
So, I'm over it. I know that AT&T will be useless to me so I'm just going to try to fix it myself. I've installed Odin3 and would like to get my phone working again. Luckily I saved my pics and contacts, so I can live with a fresh start. The question is, which version do I "flash" (I hope I used that term correctly)? I consider myself tech savvy but there are a million versions floating out there and I don't want to screw up my phone any more than it already is. Apologies if this is easily found somewhere else, but I did read a ton of FAQ pages and am still not comfortable picking out something to download.
Click to expand...
Click to collapse
What you will need to do is use Odin to flash back to stock 2.1 and then load a custom rom. To be honest you cant do anything here that cant be reversed for your warrenty. Now as for Odin that is the tricky part as some work for some and not for others. Do you remember what version was on your phone? JF6 or JH7? What build number is it? I have a odin one click that I use and would be willing to post a link but I dont want you to wind up in a worse spot then you are now. I would search for how to unbrick a captivate and if non of that works let me know and I will give you a link to what I have. Or you could call ATT and tell them what happened and return it to warrenty
Thanks for the reply. I didn't know any of the pertinent details regarding the version I had.
I ended up going to an AT&T DSC Center during my lunch break. They took one look at it and swapped it out under the warranty; it took about five minutes. The "new" phone didn't have the latest version but I was able to update it with absolutely no problems on Windows 7 32-bit (throwing out all the details in case someone stumbles upon this for help). I guess Kies is just a very fickle program. I'm pretty bummed but at least I have a functional phone and as added bonus, I stumbled upon this kick-ass website that I can browse in the future.
thej0nes said:
Thanks for the reply. I didn't know any of the pertinent details regarding the version I had.
I ended up going to an AT&T DSC Center during my lunch break. They took one look at it and swapped it out under the warranty; it took about five minutes. The "new" phone didn't have the latest version but I was able to update it with absolutely no problems on Windows 7 32-bit (throwing out all the details in case someone stumbles upon this for help). I guess Kies is just a very fickle program. I'm pretty bummed but at least I have a functional phone and as added bonus, I stumbled upon this kick-ass website that I can browse in the future.
Click to expand...
Click to collapse
Ok glad you got it resolved. Enjoy your time here and welcome. Thread closed
Apologies. I posted this first in another forum, but this appears to be the correct place for it, and I think I just messed up trying to post to this forum.
Hopefully this isn't too big a question.
My phone just did this all on its own, I was just browsing the web with it. Just running whatever was on there from Verizon and HTC, not rooted or anything.
Now all I can do is get to the fastboot menu, and can do a few things there. I just tried to go to hboot then factory reset, this after trying a lot of things, and it didn't work.
It's connected to my computer, it seems to be recognized, at least by "fastboot devices" but not by "adb devices".
It shows as "***LOCKED***" and "S-ON". Everything I've found that talks about changing those requires going into the settings, setting developer mode and or usb debugging. I can't see how to do that if I can't get into the OS.
I chatted online with HTC yesterday, and they said Verizon should help. I just spoke to Verizon, and they said HTC should help. So, it looks like I get zilch from either of them. At this point I'm looking for a data recovery company, maybe someone can crack the thing open and get my photos out of it.
The irony here is that if I had rooted the phone already I likely wouldn't be in this mess. It feels like encouragement to root these devices before they inexplicably choke.
Am I screwed?
Thanks for any assistance.
bart1822 said:
Apologies. I posted this first in another forum, but this appears to be the correct place for it, and I think I just messed up trying to post to this forum.
Hopefully this isn't too big a question.
My phone just did this all on its own, I was just browsing the web with it. Just running whatever was on there from Verizon and HTC, not rooted or anything.
Now all I can do is get to the fastboot menu, and can do a few things there. I just tried to go to hboot then factory reset, this after trying a lot of things, and it didn't work.
It's connected to my computer, it seems to be recognized, at least by "fastboot devices" but not by "adb devices".
It shows as "***LOCKED***" and "S-ON". Everything I've found that talks about changing those requires going into the settings, setting developer mode and or usb debugging. I can't see how to do that if I can't get into the OS.
I chatted online with HTC yesterday, and they said Verizon should help. I just spoke to Verizon, and they said HTC should help. So, it looks like I get zilch from either of them. At this point I'm looking for a data recovery company, maybe someone can crack the thing open and get my photos out of it.
The irony here is that if I had rooted the phone already I likely wouldn't be in this mess. It feels like encouragement to root these devices before they inexplicably choke.
Am I screwed?
Thanks for any assistance.
Click to expand...
Click to collapse
it seems that you lost your OS for some reason. Data recovery would be a waste of time since you already reset the phone anyway so if you didn't use an SdCard then bad luck.
If you dont wanna send you phone for repair, your best option its to ROOT and install a Verizon software yourself.
NOTE: if you had an SdCard and also got deleted, just use any data recovery program to recover most of the files
NOTE: do a bit of search about recovery programs as they might also access you phone if rooted. maybe one in Google play store?
bart1822 said:
Apologies. I posted this first in another forum, but this appears to be the correct place for it, and I think I just messed up trying to post to this forum.
Hopefully this isn't too big a question.
My phone just did this all on its own, I was just browsing the web with it. Just running whatever was on there from Verizon and HTC, not rooted or anything.
Now all I can do is get to the fastboot menu, and can do a few things there. I just tried to go to hboot then factory reset, this after trying a lot of things, and it didn't work.
It's connected to my computer, it seems to be recognized, at least by "fastboot devices" but not by "adb devices".
It shows as "***LOCKED***" and "S-ON". Everything I've found that talks about changing those requires going into the settings, setting developer mode and or usb debugging. I can't see how to do that if I can't get into the OS.
I chatted online with HTC yesterday, and they said Verizon should help. I just spoke to Verizon, and they said HTC should help. So, it looks like I get zilch from either of them. At this point I'm looking for a data recovery company, maybe someone can crack the thing open and get my photos out of it.
The irony here is that if I had rooted the phone already I likely wouldn't be in this mess. It feels like encouragement to root these devices before they inexplicably choke.
Am I screwed?
Thanks for any assistance.
Click to expand...
Click to collapse
If your primary concern is data, my guess is you would be wasting time even with recovery software, all those I have tried have successfully recovered images half black, half missing etc.