my phone is having problems with my providers and causes frequent internet disconnections, so i want to know is there any way to flash modem.bin and test other modems without a pc, perhaps to flash modem.bin under recovery mode or something like that? coz i want to test the modems from different firmwares and find a stable one
or, should i do a dd to overwrite bml12? but i extracted one from bml12 b4 and the file size was different from other modem.bin
thx
I'm having the same problem with froyo roms even with the correct APN settings I'm thinking of flashing back to stock. Shame
Sent from my GT-I9000 using XDA App
but my problem is, it lost connections suddenly and quite frequent, with correct apn settings of coz
Related
Know that a new modem rom ZSJI1 will be patched if you send the phone to samsumg repair center after 8Sept in Hong Kong. The new rom is an ad-hoc built to cater some critical issues with 3 and make the i9000 hang / disconnect frequently.
As I don't want to send my phone to samsung and erase all my current setting, can someone who did extract the ZSJI1 modem rom such that we can patch it with odin?
I tried JP2 modem, with JM7 PDA. It seems to have solve any issue with 3 in HK.
I tried the jpc rom before, yes it seems solved most of the issue. However i still expetience occasional lst of data connectoon.
Sent from my GT-I9000 using XDA App
still not available in the whole world
Understand that the update can now be found in KIES.
Can someone extract the binrary file such that we can update the phone using odin?
Here it is if you still need it.
GT-I9000_I9000ZSJ1_MODEM.7z
Thanks! Yes I still need it~
the given modem file cannot be flashed using odin
is there any trick???
Really?!
I still not test it but could Richthofen please veryify?
i tried to dump it out but the size is different. it's 12.5mb rather than 12mb, by dd the bml12 directly. i compared with other modems but i didnt have a clue to find out the offsets and make it work
Didn't someone get JME Rom working on CDMA Sprint Tabs? By changing the build name around?
I cant find the post, but who ever it is, please give us more details. How'd you do it? Do you recommend it? How is it holding up? Does it brick anything (GPS, MODEM?)
Thank you!
I did it to my Sprint Galaxy Tab, original post here (http://forum.xda-developers.com/showthread.php?t=929898)
I had to remove movinand.mst and it flashed fine using Odin, I just followed the directions there.
HOWEVER, the way I did it will make the Tab WIFI Only with no known way to get back until someone can figure out how to dump the sprint stock modem.bin.
That is fine with me as I did not want the 3G, but did want the Bluetooth HID. (now my Bluetooth Mouse and Keyboard work)
You might be able to pull the modem.bin file out as well as movinand.mst but I have no idea what that would do, sounds very risky.
M.
did that brick your GPS though?
I use it as WIFI Only as well.
How does the JME run on the tab?
Can you upload the exact JME rom you updated for us CDMA users who are kind of new at this? That is if you still have the version you edited for the Sprint?
If there's one thing I learned with flashing ****.... as long as you don't **** with the radio you can't really mess it up. With that said, don't flash a new modem (radio)
exactly then, cant we just have all these ROMs take out the Modem.bin, wouldn't it be flashable to CDMA then? or no
Yes it borked the GPS as I flashed with the modem file to get rid of sprint, works fine so far and I can use my Bluetooth mouse and keyboard now, had to reinstall all apps though.
I just Flashed Roto's JMG last night, will see how that goes.
I used the ROM from here http://forum.xda-developers.com/showthread.php?t=894763 and took out movinand with 7zip.
I assume you could take out the modem file as well or try the update version.
I would put in a request to Rotohammer to make one for the CDMA tabs without modem and movinand to be safe.
No idea if flashing without the modem file will fry the CDMA modem as I cant test this do to no one being able to get the stock Sprint modem dumped yet.
M.
I have no experience in doing this so I was curious on just how someone would go about dumping the stock Sprint Modem? also would we be able to use the epic 4G's modem since it's similar? or would that not work due to the epic having 4G and being a different device? If I knew what direction to go I'd certainly be interested in getting in to this more.
Now if someone can just confirm how to flash without killing the modem, we'll be cooking with gas!
Morolinith said:
Yes it borked the GPS as I flashed with the modem file to get rid of sprint, works fine so far and I can use my Bluetooth mouse and keyboard now, had to reinstall all apps though.
I just Flashed Roto's JMG last night, will see how that goes.
I used the ROM from here http://forum.xda-developers.com/showthread.php?t=894763 and took out movinand with 7zip.
I assume you could take out the modem file as well or try the update version.
I would put in a request to Rotohammer to make one for the CDMA tabs without modem and movinand to be safe.
No idea if flashing without the modem file will fry the CDMA modem as I cant test this do to no one being able to get the stock Sprint modem dumped yet.
M.
Click to expand...
Click to collapse
I killed my modem but I need to figure how to get it to mount my sd card.
Sent from my DROIDX using XDA App
Sprint: SPH-P100 firmware
I saw an article on: http://www.samsunguniverse.com/forum/topic56.html
and got a link from:[email protected] to donload the stock rom for flashing...
download site: http://depositfiles.com/files/elmpfgeel & http://fileshare.in.ua/4106185
This has 5 files:
SPH-P100.DJ30.tar
modem.bin
Odin3v1.31.exe
Odin3.ini
pit.pit
paragpatil said:
I saw an article on: http://www.samsunguniverse.com/forum/topic56.html
and got a link from:[email protected] to donload the stock rom for flashing...
download site: http://depositfiles.com/files/elmpfgeel & http://fileshare.in.ua/4106185
This has 5 files:
SPH-P100.DJ30.tar
modem.bin
Odin3v1.31.exe
Odin3.ini
pit.pit
Click to expand...
Click to collapse
----------------------------------------------------------------------
I know that file name is floating around as a flashable "almost stock" ROM that has the Epic 4G modem inserted, so you can recover your sprint tab but lose gps. I would get someone who has already borked their gps by flashing to test it and see if it fixes it before everyone goes flashing this ROM.
If I was doing a restore using the files posted I would not flash the modem.bin. That's what breaks the Tab, not the software.
Need help I bricked my Galaxy Tab by Sprint trying to flash Overcome. Now I am stuck at the Galaxy/Samsung screen of death. Computer recognizes sometimes and others not. Is there a way to get it into download mode again or a I screwed.
dfinney67 said:
Need help I bricked my Galaxy Tab by Sprint trying to flash Overcome. Now I am stuck at the Galaxy/Samsung screen of death. Computer recognizes sometimes and others not. Is there a way to get it into download mode again or a I screwed.
Click to expand...
Click to collapse
Well you can't get any worse, so try this file to load;
http://forum.xda-developers.com/showpost.php?p=11139968&postcount=10
Keep trying to get it into download mode, down volume and power depressed together.
Hi,
I'm under the impression that the radio is different from the modem, therefore my previous efforts to fix a problem with the auto-connection to HSDPA/3G were somewhat in vein. If I am correct in this, it could be the reason that my "phone information" settings won't stick (revert to default) and my phone, once connected to EDGE, will not automatically reconnect to HSDPA/3G.
Would someone be so kind as to point me in the direction of CWM-flashable radios? If needed, I am on the AT&T network (U.S.) with the international GT-I9000. ROM and kernel are in the signature, modem is JPY but flashing to the U.S. modem made no difference.
Thank you for your help or even your attention on the matter. I plan to write this up as a tutorial for this very problem should this solve the issue which I believe it will.
All the information you need is here:
http://forum.xda-developers.com/showpost.php?p=9579987&postcount=11945
It's telling me it's a bad link. I'll try to receive it through search and post the link if I get it.
EDIT: http://forum.xda-developers.com/showpost.php?p=9579987&postcount=11945
I flashed JPP to see if that can fix the issue as it's compatible with the U.S. I'll edit again once I go outside in order to see if it auto connects to HSDPA once I'm out there. It's a good test IMHO as I only have the 1900mhz band of wcdma therefore it doesn't penetrate the walls of my place of work.
edited the post above to fix the URL
I went out and checked. It still requires me to go into wcdma only and then back to wcdma/gsm in order to get hsdpa, also, the changes in phone information still don't stick. I need the actual radio file in a CWM flashable zip. Also, after changing modems to JPP, speed test doesn't work. I'll just uninstall from the market and re-install since the data connection is still works and see if there is any improvement on that front.
Which one is the radio file as opposed to modem file .
jje
EDIT: It's in the modem but not included with the modem as far as I know. Specifically, I need to flash a new Radio Image zip file. I found some through cyanogenmod but I'm not sure if it would be a good idea to use those as they may only be working with cyanogenmod ROMs.
Modems and CSC files flash from an update zip via the rom kitchin .
http://romkitchen.org/
http://forum.xda-developers.com/showthread.php?t=817703
jje
I edited the post. Those modems don't contain an updated radio image or any radio image, i think. It's more a matter of finding the right radio image file to flash.... http://forum.xda-developers.com/showthread.php?t=940095 It's midway through the first post. I'm not sure if I should flash it with Darky's ROM or not since it's cyanogenmod but I think as long as I switch to the JPY modem it should be fine.
Interesting.... I did some reading on the kitchen modems and apparently they flash a new radio image in the modem where others don't. I looked at my status through "about phone" and my IMEI SV changed from 01 to 02. When I get back outside to where I know I have HSDPA access, I will report on whether this fixes the lack of auto connect to HSDPA from EDGE.
There is no such thing as a radio for galaxy s devices, that is a htc phone term.
Instead, we have modems. The issue you're talking about is probably rom related.
Sent from my GT-I9000 using Tapatalk
So, you're saying a re-flash of the ROM then.... I think I've had this issue since Darky's 9.2 and I've flashed through the betas and I'm on 9.3 stable now. I have also done a wipe but not a repartition in Odin. I think Odin is a cleaner install then CWM but it's just so convenient to flash right from the phone. I guess I'll do that then.
Thanks.
What happend if i want to flash KB3 with modem tar from LUBKB1 for example that its my original firmware (Argentina).??
A bricked phone...& even dont think to try it..
I thought the same because xxkb3 seems to flash different from single tar firm like lubkb3..i cannot solve my 850 band problem yet
Any way to make a lubkb3 firm with 3 files and pit?
Sent from my GT-I9003 using Tapatalk
True.... i just download the rom and notice that... dam.... can some hack the 3g driver or baseband like in Motorola, before i have this phone i had a Motorola Milestone, and i flash any room of milestone and then aply a patch called 3ghack, and i got 3g in every rom, cant we do the same in samsung?
Yesterday went ahead and flashed the modem to tmobile stock NA using ODIN. Did some research and from I what I found the thinking was this would fix the issues with dropping the cell connection as the Rom was using the European modem firmware. Flash went fine, however now when I go into providers and select T-mobile I get a message saying it cannot connect to the server. Under the system settings it is still showing up as JPZ.
Please any help would be appreciated
Ric Nagy
Galaxy Tab 7' SGT-849
64GB Memory
Cyanogen 10 Latest nightly build
Connection Issue
I had this question answered in another forum....I was told to copy the modem.bin file to the /radio folder on the GTAB. However as far as ril's from what I see getril's doesn't support GTab and not sure where to find the ril's for TMo N/A stock modem
Help Needed
rjnagy said:
I had this question answered in another forum....I was told to copy the modem.bin file to the /radio folder on the GTAB. However as far as ril's from what I see getril's doesn't support GTab and not sure where to find the ril's for TMo N/A stock modem
Click to expand...
Click to collapse
Still having original problem...flashed us stock modem using ODIN which seemed to break my data...then I tried copying over modem.bin to radio...still can't connect...getting message "Cannot connect to this network right now"
Baseband shows up as T8849UVJJB which I'm guessing is the stock modem.
Samsung Galaxy Tab
CM10 4.1.2
20130210 P1 nightly
Any help would be appreciated.
Is your IMEI OK? Showing as 35xxxx ?
Anyway since February already many T-Mobile user in P1000 said connection failed.
It must be due to something T-Mobile did, or new security measure.
Two persons in this thread, 5-Feb is the start of the problem
http://forum.xda-developers.com/showthread.php?t=2135600
Sent from my GT-P1000 using xda app-developers app
Modem Issue Solved in a roundabout way
After I had flashed the modem originally...I went back and did a backup of my apps with Titanium Pro and then did a reflash of the CM Rom the cool thing was after reflashing the rom it kept the tmob us stock modem, I got my highspeed connection and then restored all my apps with Titanium.