Related
This is a bad and hardly structured review with a focus mainly on video playback. This is not a full review, and there's more things I want to test (and probably info I will post) for the future. It is also 4 AM, so don't expect any literary gymnastics.
So, I've had the (Euro) HDMI dock for a few weeks now (as well as the black leather sleeve, which is nice) but hadn't really gotten around to testing it. Primarily because I hadn't gotten around getting a mini-to-normal HDMI cable - yes the dock has a mini-HDMI output. The cable in question is commonly known as an HDMI "A<->C" cable with male ends on both sides.
Let's get the details you all know already out of the way. We're talking about the ECR-D980, more info here.
The dock itself comes packaged with nothing. No extra USB cable, no HDMI cable (or even converter plug), nothing. Keep in mind that these up the total cost of ownership for the dock quite a bit. I got the dock for about 29 euro, add about 20 euro total before you have a second SGT USB cable and a mini-to-normal HDMI cable. So that's 50 euro or about $70 US minimum cost at the time of writing, significantly more if you don't search a bit to find the cheapest deals. You don't strictly need the extra USB cable, but it becomes annoying in most setups if you don't have it - you'd be switching the cables location a lot.
The dock itself feels like a solid piece of equipment, much like the Tab itself. It features a 3.5mm audio out, mini-HDMI out, and 30-pin Samsung "PDMI" USB / power connector (the same connector on the Tab itself).
I started out testing at a friend two weeks ago, using his Sony soundsystem (several HDMI ins & outs) and his 42" high-end-4-years-ago Philips LCD. We were however completely unable to get it to work. Having no clue which component the problem was, we gave up after a bit. Note that his LCD doesn't do 1080p, but max 1080i (at time of purchase, even 1080i was rare). So I borrowed his cable, and today I tried it (with his A-C cable) in my home, on my Samsung 6-series 37" LCD that does do 1080p, without any special soundsystem. Note again that I used a converting cable, not an A-C converter plug. I know people have reported problems using those.
As soon as I plugged everything in, I immediately had display on my screen. We still don't know what the issue was at my friend's house, but keep in mind that it may be a requirement that the display device supports 1080p. The signal received by the TV was 1080p30. I think this is the maximum the device will do, as my TV does support both 1080p50 and 1080p60 as well (and I regularly use both those modes).
Immediate snags:
(1) First, the dock needs to be connected (via the USB cable) to a power, or HDMI will not work. I actually used an old HTC adapter instead of the Samsung one, that delivers 1a instead of 2a, and that worked fine. Connecting it to a computer USB port (0.5a) reportedly does not work, but I have not tested this myself (yet).
(2) Second, the Samsung USB cable you got with your Tab is really short, using an extender cable is almost certainly necessary for most situations.
(3) Third, the 3.5mm audio out does NOT work while HDMI is connected (reported by others, not tested myself)
(4) Last, the backlight will NEVER go off when connected over HDMI. Not even using the power button.
So, when you have it all connected, you will see one of two things: a really narrow output of your portrait screen, or a screen-filling output of your landscape screen. I advise everyone to put the device in landscape mode and enabling the orientation lock before connecting. Note that the HDMI dock is also a really handy standard for landscape mode!
When in the normal Android UI, you can clearly see the artifacts of upscaling. You'll see whatever happens on the Tab on the TV as well, scaled up (and not using a good resampler). The Android UI does NOT suddenly see a FullHD screen (as I expected, but some may be surprised).
However, some applications that go full-screen do see and use the FullHD resolution. I have not extensively tested this on many applications. For example, the YouTube app appears to see FullHD, but I can not be certain. The stock Samsung video player does see and use the FullHD resolution, as far as I can make out.
I have tested playback of the following videos, in the stock video player:
(1) Iron_Man_2-DivXPlusHD.mkv - 81mb, 2:30, CCV1 1920x800 23.98fps, AAC 48000Hz stereo, 4.4mbps
(2) Cowboys & Aliens - Trailer.mp4 - 174mb, 2:31, CCV1 1920x816 23.98fps, AAC 48000Hz stereo, 9.2mbps
(3) v.2009.s02e03.720p.hdtv.x264-ctu.mkv - 1118mb, 41:22, CCV1 1280x720 23.98fps, Dolby AC3 48000Hz 6ch, 3.6mbps
(4) the.mentalist.s03e12.720p.hdtv.x264-ctu.mkv - 1119mb, 41:48, CCV1 1280x720 23.98fps, Dolby AC3 48000Hz 6ch, 3.6mbps
These four videos all played fine, with audio and everything. V even had subtitles, and those worked well. However I must note that the button to disable subtitles is disabled while outputting to HDMI. Not sure what that is about. DTS is still on my to-test list, but I'll get around to that when we get the setup working on my friend's soundssystem, where I can also test whether or not the output is more than stereo or always downsampled to 2-channel.
The video output is pretty good, but not without buts.
(1) First, as stated before, the backlight on the Tab will not go off no matter what you do, and you will see one of the first frames of the video as a still on the Tab. You can however still use much of the videoplayer UI (which is suddenly slightly different: amongst other things options like brightness and scaling disappear), and that UI only appears on the Tab, NOT on the TV. Now if only I could control that UI, over Wi-Fi, with my SGS ... (might be possible through DLNA, btw, a nice test for the future)
(2) When you look closely at the image produced, you will see that the postprocessing is not quite up to par to the quality you get from CoreAVC or even ffmpeg on a laptop or HTPC or whatnot. The difference does really seem to be postprocessing though, not bad decoding or scaling.
(3) There is some shift in framespeed. Not traditional suttering you might see when the player cannot decode fast enough, though, the speed seems to be fine. I think this has to do with the fact that first the Tab has to scale 24fps to 30fps, which is probably done with some pulldown scheme, and then my TV has to scale that to 100hz, again with some pulldown scheme. I'm sure the videophiles amongst you will understand what I am talking about, even if the jargon is not correct. If you're not following, you are probably someone who wouldn't even notice it. Also note that I have all video-enhancing features on the TV itself turned off (as always). Enabling the 100hz motion interpolation mode makes the issue mostly disappear, but I really hate the "homevideo" effect you get when doing that. All in all, when watching a 40 minute show, you don't really notice it anymore after a few minutes, but if you're like me you know it's there and see it. If it were 1080p25 instead of 1080p30, the issue would probably not exist.
All in all, it does look good and works pretty well. Unfortunately, though most of these individual issues are small, together they are big enough to prevent this from being more than a casual playback device. It comes close, but not close enough to being a home-theater device. However, who knows maybe XBMC can be ported and we'll get past a number of these problems.
I won't make any claims as to whether the HDMI dock is worth the money or not. You know the price, and you have a bit of information here, and more in other reviews online. You have to decide for yourself it it's worth it. Hope this is helpful and/or interesting to someone.
For me the dock was totally worth it. The framespeed issue you describe is definitely there, but I do not notice that unless I am consciously looking for it. I have watched a lot of movies quite comfortably using the dock on Full HD TV.
And yes, if TV is not 1080p, for example just HD Ready and not Full HD, the video output is not HD at all. I think it's the same as Tab's screen: 1024x600.
"Connecting it to a computer USB port (0.5a) reportedly does not work, but I have not tested this myself (yet). "
USB from my computer (Kies drivers installed) works fine with the Dock. I have an HDMI capable computer monitor and this also works fine with the dock.
Thanks for the review!
For those who purchase movies through MediaHub, you will not be able to play back through HDMI dock to TV. http://www.samsung.com/us/mobile/galaxy-tab-accessories/ECR-D980BEGSTA-reviews
GeorgijSapkin said:
For me the dock was totally worth it. The framespeed issue you describe is definitely there, but I do not notice that unless I am consciously looking for it. I have watched a lot of movies quite comfortably using the dock on Full HD TV.
And yes, if TV is not 1080p, for example just HD Ready and not Full HD, the video output is not HD at all. I think it's the same as Tab's screen: 1024x600.
Click to expand...
Click to collapse
Have you tried movies with DTS ? And on a surroundl soundsystem ? If so, can you share the details ?
Re: 1080p, you are saying even if the TV does not support 1080p, you do still get output ? Would mean that 1080i is not the problem on my friends' system, as we got no output at all.
(good info on this dock is hard to find )
specmac said:
"Connecting it to a computer USB port (0.5a) reportedly does not work, but I have not tested this myself (yet). "
USB from my computer (Kies drivers installed) works fine with the Dock. I have an HDMI capable computer monitor and this also works fine with the dock.
Click to expand...
Click to collapse
I meant using the computer as power source for HDMI. Do you get HDMI output when the USB cable is connected to a computer ? I read on some other reviews people did not get that to work.
quattr0 said:
Thanks for the review!
For those who purchase movies through MediaHub, you will not be able to play back through HDMI dock to TV. http://www.samsung.com/us/mobile/galaxy-tab-accessories/ECR-D980BEGSTA-reviews
Click to expand...
Click to collapse
That is really silly ...
Yes, dock connected to my computer via usb and connected to my monitor via hdmi. Outputs to the computer monitor just fine with this configuration.
Sent from Samsung Galaxy Tab
Dock but no audio
I have this dock but I get no audio what so ever... Have you had to do anything at all to enable it?
gsjurseth said:
I have this dock but I get no audio what so ever... Have you had to do anything at all to enable it?
Click to expand...
Click to collapse
Worked out of the box for me, through HDMI. Haven't tried 3.5mm jack. Have heard that complaint before though.
Nice review its a bit dissapointing for me that they chose the mini HDMI standard as there is plenty of space to have included a normal size plug.
Maybe I'm just annoyed because I have HDMI cables laying around but now need to buy a mini HDMI cable
Ghostwalker9 said:
Nice review its a bit dissapointing for me that they chose the mini HDMI standard as there is plenty of space to have included a normal size plug.
Maybe I'm just annoyed because I have HDMI cables laying around but now need to buy a mini HDMI cable
Click to expand...
Click to collapse
100% agree
YouTube is great when you're docked. You can flip through videos and playlists on the tab while a YouTube clip continues to pay fullscreen on your TV - nice! It's a shame you can't play HD though.
I stripped the DRM off all the free movies that came with my Tab so I can play them directly through the dock. Inception looks great! You're right though, post-processing looks a little rough at times.
The dock is pretty overpriced for what you get but I'm happy with it all-in-all. If it came with a mini HDMI cable it would be perfect.
are you using a stock rom or custom rom? wondering if that will matter in regards to dock performance, i am on the rotohammer jme v4 and love how fast it is compared to the stock roms.
thanks for the notes/review!
Chainfire said:
Have you tried movies with DTS ? And on a surroundl soundsystem ? If so, can you share the details ?
Re: 1080p, you are saying even if the TV does not support 1080p, you do still get output ? Would mean that 1080i is not the problem on my friends' system, as we got no output at all.
(good info on this dock is hard to find )
I meant using the computer as power source for HDMI. Do you get HDMI output when the USB cable is connected to a computer ? I read on some other reviews people did not get that to work.
That is really silly ...
Click to expand...
Click to collapse
My projector is 1024x768 and the dock work well with it, so 1080p is not necessary for it to work, and as a power source I use an external battery rated 500mh, so I guess a computer usb port should be able to power it.
My problem is that my projector doesn't have an audio out jack, and when the hdmi cable is connected all the audio port of the tab get disabled, INCLUDING bluetooth audio. This is why I now use this dock as an overpriced charging dock
Sent from my Galaxy Tab
http://slickdeals.net/forums/showthread.php?sduid=236523&t=2611349
Just an FYI. $37 Shipped.
FYI, I got this 6 foot long Samsung sync/charge cable for only $8 (with shipping) that is a great companion for the Dock because the stock Samsung cables are way too short.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300509955254
w4rmk said:
FYI, I got this 6 foot long Samsung sync/charge cable for only $8 (with shipping) that is a great companion for the Dock because the stock Samsung cables are way too short.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300509955254
Click to expand...
Click to collapse
Just what I needed !
does SGT screen needs to be turned on while docked, because while streaming / watching vids i dont want to hav twin/identical display
Sent from my GT-P1000 using XDA App
erlz said:
does SGT screen needs to be turned on while docked, because while streaming / watching vids i dont want to hav twin/identical display
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
As metioned in the first posting of this thread, unfortunately you cannot turn off the screen on the Tab when it's in the doc. When watching video's the first frame of the video stays visibile on the Tab the entire time. When your not watching videos the displays on the Tab and your TV are mirrored.
I buy the HDMI station dock and I find it no really good!
A HD photo is not so nice on the LCD, it ok buy when you see then at the real resolution with the camera, it's bad!
The only way that I can have good resolution is when i plug the tab into the PS3 like a hard drive annd the I see the same photos like they are and my videos arein real 720P or 1080P
I will returned it and wait for a new model or plug into my PS3
I just picked one of these up and was a bit disappointed with the video quality too. Videos looks great in HD on the Tab but jaggy and average quality on the TV - no better than a DVD really.
I bought one so I could connect it to the TV in my hotel room when I go on Holiday soon. Is it true that if you get no audio over HDMI, you can't use the line out at the same time? I was going to take some small speakers just in case the TV in the hotel didn't support audio (should be fine, think they're Samsung 32" LCD TVs).
I'm a bit surprised there's no settings you can tweak on the Tab other than PAL or NTSC to correct the overscan and advise on resolution and FPS.
Surprised about the quality, I loaded a webpage up in Xscope and could hardly read it on the TV, very poor. I genuinely thought it would be near HD. I could just take my 13.3" Laptop with HDMI out but that's 2.5KG.
At least I'll get lots of films on the Tab as there's no point putting HD ones on there if they don't look HD on the big screen. What an oxymoron that they look better on the Tab screen!
Hi,
I am a new user to the forums. Recently I have purchased TV out original samsung 3.5 to RCA cable for TV out capability but I see distorted image on TV. Thought it was a cable problem and went to at&t device support center but they couldn't help me out because they can't test my device at there center. I wonder any one tried it and if so is there any limitation on hardware/software for captivate.
Please help.
shashib said:
Hi,
I am a new user to the forums. Recently I have purchased TV out original samsung 3.5 to RCA cable for TV out capability but I see distorted image on TV. Thought it was a cable problem and went to at&t device support center but they couldn't help me out because they can't test my device at there center. I wonder any one tried it and if so is there any limitation on hardware/software for captivate.
Please help.
Click to expand...
Click to collapse
Mine works just fine, quality is comparable to an old VHS vcr.
Some cables you have to switch the red audio out with the video to get them to work right.(use right audio for video, and video for right audio)
nickm50 said:
Mine works just fine, quality is comparable to an old VHS vcr.
Some cables you have to switch the red audio out with the video to get them to work right.(use right audio for video, and video for right audio)
Click to expand...
Click to collapse
Thank you Nick for the quick input. I appreciate your concern.
Might want to also try jacking with the cable on the phone end.
The 3.5mm Jack isn't exactly a "Great" output mthod for Video. Try just pulling it up and pushing it down a little. You can fell where the grooves are. Just try to move them around in there to get a better connection.
Thats what worked for me @ least.
I'm slightly miffed as to why Samsung decided no HDMI out, and instead stuck with a crappy 3.5mm headphone out for video.
Works fine for me....can't seem to get the volume any louder though
Sent from my SAMSUNG-SGH-I897 using XDA App
I also get the same distorted video and a buzzing-hum that drowns out the audio with my 3.5 to RCA/AV cable. I have tried both tv out settings on the phone and swapping the red and yellow ends of the cable. I can, however, use my Play Station 3 to watch, copy and save videos and pictures with the usb cable. It works great and gives awesome audio and video.
Rooster* said:
I also get the same distorted video and a buzzing-hum that drowns out the audio with my 3.5 to RCA/AV cable. I have tried both tv out settings on the phone and swapping the red and yellow ends of the cable.
Click to expand...
Click to collapse
Same here.
I just ordered an RCA out cable and am really excited to get it. Even thought it isn't HD it will still be really nice to do.
I was surprised with how good the quality is. I use a cable that came with my Zune dock. It matches correctly to the inputs. My phone looked much better than the Zune did using the same cables.
The audio was great, and the video was as others said VHS quality. Definately watchable. I will say the landscape quality was much better than the portrait quality. On my HDTV I want to say it wasn't full screen, but using the zoom in the TV menu it became full screen, correct proportion.
I agree that Samsung leaving out HDMI support is bad, and disappointing after they told everyone a micro-usb to HDMI cable would fix that, then changed their minds.
This is a problem I won't trouble myself with much longer, I plan on getting an Atrix when they come out.
Sent from my SGH-I897 using XDA App
SM Galaxy S Captivate I896 running CM7: 3.5 mm to AV out?
Hi everyone, I am wondering if anyone knows whether or not I can use the 3.5 MM to AV out option with a Captivate I896 that has been modded with Cyanogen Mod 7.
I don't seem to have the TV out option in my display settings.
Canadacorps said:
Hi everyone, I am wondering if anyone knows whether or not I can use the 3.5 MM to AV out option with a Captivate I896 that has been modded with Cyanogen Mod 7.
I don't seem to have the TV out option in my display settings.
Click to expand...
Click to collapse
As far as I know it's not (yet) supported by cm7. Someone please correct me if I'm wrong.
Sent from my Captivate
Rooster* said:
I also get the same distorted video and a buzzing-hum that drowns out the audio with my 3.5 to RCA/AV cable. I have tried both tv out settings on the phone and swapping the red and yellow ends of the cable. I can, however, use my Play Station 3 to watch, copy and save videos and pictures with the usb cable. It works great and gives awesome audio and video.
Click to expand...
Click to collapse
Interested in the whole PS3 thing. How do hook up phone to PS3? Headphone jack to USB or a way to go micro-usb to USB?
Canadacorps said:
Hi everyone, I am wondering if anyone knows whether or not I can use the 3.5 MM to AV out option with a Captivate I896 that has been modded with Cyanogen Mod 7.
I don't seem to have the TV out option in my display settings.
Click to expand...
Click to collapse
Curti.nogg is correct, unfortunately :-( TV-out is not yet supported with CM7. Maybe if enough people talk about the devs will look into it...
RTBee said:
Interested in the whole PS3 thing. How do hook up phone to PS3? Headphone jack to USB or a way to go micro-usb to USB?
Click to expand...
Click to collapse
I just use the usb cable that came with the phone or any other micro usb to usb 2.0 cable. Just write folders on your phone's sd card named PHOTO, MUSIC and VIDEO. Put your photos, music and/or video into the corresponding folders. Plug the phone to the PS3 via usb cable. Turn on usb debugging on the phone. Now look on the PS3 in PHOTO, MUSIC or VIDEO for USB MEDIA STORAGE. There will be all your stuff. You can copy back and forth or just play it on the tv or sound system.
Sorry it took so long to answer, I totally forgot all about this thread.
Good day,
Just bought this HDMI cable for my phone is it suitable?
http://www.ebay.com/itm/6FT-Micro-H...ltDomain_0&hash=item336b725922#ht_3308wt_1037
Last Q, when you connect these cables must you turn off your phone or are they "plug and play"
Thanx!
Looks like it will do the job, you just plug it in and the picture appears on the screen.
Plug and play.
Its a bit of a wank really, show off pretty games to friends.. no real use i can think of.
Unless you wana watch a movie on a tv that has hdmi but no USB.
Sent from my LG-P990 using Tapatalk
Would have been better if when you plug the phone into the telly, the screen on the phone then becomes a touchpad that you control a cursor on the screen with.
Would have made for pretty good Angry Birds etc. experiences.
Thanx guys, great for showing off yeah
didn't u got the cable with phone???
HDMI cable was included in box when i bought it.and it works great even can play games without lagging ,full hd support..but ya videos little bit lags...
In Vodafone Romania box HDMI cable wansn't included.
RobYyY said:
In Vodafone Romania box HDMI cable wansn't included.
Click to expand...
Click to collapse
Those thieves!!!, even in Mexico (Telcel as carrier) included the HDMI cable, the main reason I brought this phone! (went from Iconia A500 to this... to watch anime without a PC, I have been without a laptop 3 years straight, I found myself not using it, now with tegra 2 and LG more reason not to).
RobYyY said:
In Vodafone Romania box HDMI cable wansn't included.
Click to expand...
Click to collapse
Yeah they robbed you blind bro.. Cause I have the Canadian (Fido) Version and I got the works.. HDMI, headphones.. usb and Ac adapter.
Mine doesn't have the HDMI cable included as well...
Is it really useful? I don't see I'm gonna need this, but heck I might be wrong...
Hello!
In Germany there isn't a HDMI-cable included either...
I use this adapter and a cable I have always installed in case I want to connect my laptop to the TV.
http://www.amazon.co.uk/Cablesson®-...HVPM/ref=sr_1_1?ie=UTF8&qid=1324144699&sr=8-1
I use it for slideshows, video playback and online radio playback.
...works fine.
And on the phone side it is plug and play, but you TV might need to be changed to the right source channel (i.e. HDMI 3 in my case) – but some TV sets might do this automatically if there isn't connected any other video source.
Heh just remembered, my HDMI cable is hanging out the back of my telly... shame the phone is gone
HDMI is not that useful imho. Some games are great to play on big screen but there is problem with short cable, you need to be very close to TV.
I also tried GTA 3 on big screen (plasma hd ready). Very poor graphic, i would rather install this game on my PC again.
Platoon said:
HDMI is not that useful imho. Some games are great to play on big screen but there is problem with short cable, you need to be very close to TV.
I also tried GTA 3 on big screen (plasma hd ready). Very poor graphic, i would rather install this game on my PC again.
Click to expand...
Click to collapse
HDMI can be extended http://www.dealextreme.com/p/gold-plated-hdmi-female-to-female-adapter-converter-29363 so you can get at least 3-4m from TV.
Bought it along with micro HDMI and a normal HDMI cable, works just fine. But, it's not so useful, really. Photos are not in high res, movies are sometimes ok but some don't work at all (mkv 4.1 profile and up, there are multiple threads about that). So... maybe it's better to use DLNA and ordinary PC, PS3, real media players.
I never got an HDMI cable in my UK box either.
So just a quick review of the NETGEAR Push2TV Wireless Display Adapter PTV3000 I just bought. Got it for a bit under $60 USD from Amazon. Did the firmware update at work before coming home -- didn't even have a TV to connect it to there! You do the update from a PC over Wifi and web interface. Now, I first tried to update the firmware from a Mac laptop I had lying around but couldn't. I could bring up the update page, but when I browsed for a file, I couldn't pick it! Tried both Safari and Chrome... Either way, just used a Windows laptop and IE 9 and the update worked fine.
Anyway, at home plugged it into my TV, picked up my Note 10.1 tablet and it works great. With the latest firmware on the Netgear, connection speed is pretty quick -- a few seconds. Video from my Note 10.1 was slightly letter boxed due to the 1280x800 resolution of the tablet ... but when you played video it would go full screen. When playing video, any on screen graphics do no show up on the TV at all. Also, on the Note 10.1 when playing video through it, you do not see video on the tablet anymore. Just black where it should be. This is fine (IMHO) ....
When using the UI of the tablet, the speed on the tablet felt unaffected (butter smooth in other words) but on the TV it was maybe running at 30fps. You could see some flight artifacting but I was sitting very close to my 52" LCD.... Text was totally readable and it looked just as good as Airplay does on the Mac.
NOW, I cannot test with my phone. Why? Well, I didn't know this, but when I tried to connect, it would connect, but after about 10 seconds disconnect. On my TV it would say HDCP Connection Error (or something along those lines.) After a little reading, turned out because my phone is rooted and has a flash count of 1 and System Status: Modified, you cannot use AllShare Cast! That is crap if you ask me, but it's how Samsung set it up.
I tried flashing stock recovery and then using Triangle Away, but the phone still says "Modified" and that sets the count back to 1. Pretty lame ... I am on a stock rom/kernel and now recovery, but something is flipping the status. I'm sure if I flashed back to 100% stock it would work fine, just like it does on my bone stock tablet .....
Honestly, this is a real bummer to me as I was excited at how well it worked with the tablet and for travelling, this tiny little box would be great for using in hotel rooms.
Oh I didn't mention, the size of it is very small -- like a deck of cards, and very light. Also it has a Mini_USB input (not Micro) and while the power adapter is 5v/1amp, it says when you turn it on you can easily power it from the USB port on a TV. Very handy.
So to sum it up:
Stock phone with unmodified system status? Get it. Cheaper than Samsung AllCast dongle and more functional because it supports Miracast (Sony Xperia, Nexus 4, some LG phones) and also Intel WiDi so basically all the current crop of Windows 7 and 8 laptops running with 3rd gen intel processors.
Modified phone like me? Better stick to the MHL HDMI adapter and you will have to get up to walk to your phone to switch the video or buy a long HDMI cable.
Fire away if you have any questions.
Edit: I made a quick Youtube video showing this thing in use: http://www.youtube.com/watch?v=JnqhZdjm16s
Today i updated to OneUI 2.5 and the Smart View function from the notification panel doesn't find my TV anymore. It used to work before. My TV is a 2011 Series 6 one. The 32D6100 model connected via wire to internet. I tried the Smart Things app and it found it as a directly connected device but sharing things from the app is cumbersome compared to using the Smart View toggle. Can someone on OneUI 2.5 please see if it works for them?
Worked for me. Sometimes I need to restart either tv or phone or both of them to connect again. Other then that it works great. I use wireless dex if cast doesnt work.
ravijani said:
Worked for me. Sometimes I need to restart either tv or phone or both of them to connect again. Other then that it works great. I use wireless dex if cast doesnt work.
Click to expand...
Click to collapse
Weird. I restarted tv and phone and nothing. Actually my phone does find something but every time it's a different random device. One time it was a LG TV, one time a Sony, then some random projector. And if i try to connect it disappears from list. I'm connected to wifi and there's only one TV that's also connected to the same internet in my home. TV doesn't support miracast as it's quite old though so i can't use wireless dex or screen mirroring on it. Smart view could only show some content from the default Samsung gallery, music and video apps. Will buy an Anycast M9 Plus dongle and hope everything works with it.