Hi all.
I had a problem with my wife's Orange locked Galaxy-S where it has a simlock code that I am unable to get around after tricking KIES into flashing I9000XXJPC via the registry hack.
I was wondering if someone could post the default registry settings for an Orange UK branded handset for KIES in the hope that I could trick KIES into flashing the Orange Froyo update when it is released?
I'm hoping that by doing so once it's released and can be update, my wifes phone may accept her sim-card again.
I take it all I would need is the following:
"SoftwareRevision"="CURRENT ORANGE VERSION"
"ProductCode"="CURRENT ORANGE VERSION"
"HIDSWVER"="CURRENT ORANGE VERSION"
"DEVCONINFO"=""
I want to put this request in before any release is updated & I'm hoping that flashing an official Orange UK software version may help.
Thanks for any help!
(The Galaxy-S is currently being used as a glorified media player and my wife has my Nexus One for now which I'd love to get back!)
Related
I am only on Firmware Verion XXJF3 and I know that a newer version is avaiable. Yet for some weird reason my Kies application does not recognise this. I thought getting the new version would help and today I got the latest Kies 1.5.3.10103_100 but still no joy :-(
Also my phone was purchased on Orange Contract if this helps
any ideas please?
I think it's because the phone is an Orange contract phone, Samsung have said Froyo has been released but won't be available for contract phone users until about the end of this month.
Hang in there buddy
xt9 bug
double post remove
im not very good at
sizla said:
I am only on Firmware Verion XXJF3 and I know that a newer version is avaiable. Yet for some weird reason my Kies application does not recognise this. I thought getting the new version would help and today I got the latest Kies 1.5.3.10103_100 but still no joy :-(
Also my phone was purchased on Orange Contract if this helps
any ideas please?
Click to expand...
Click to collapse
Thanks for the reply. Im surprised that even the newer version JM1 is not avaiable as opposed to Froy. I would have thought that at least I could update to this version :-(
device's version cannot be updated
Hi,
When I select firmware upgrade from Kies, I get this information:
Model Name: GT-9000
CurrentVersion: PDA:JF3/Phone:JF3
This device's version cannot be updated.
I have done a factory reset to my phone and even unrooted the phone but still i am getting the same error.
I have tried to reinstall Kies as well but no luck.
Did any one find any think on this.
ADeadlySpoon said:
I think it's because the phone is an Orange contract phone, Samsung have said Froyo has been released but won't be available for contract phone users until about the end of this month.
Hang in there buddy
Click to expand...
Click to collapse
Hi,
I have a question that's related.
If you have an Orange contract phone, but have flashed with a firmware to remove Orange branding, does Kies then think that your phone is non-contract and subsequently update it?
Thanks!
Hi,
I've recently moved from Australia to the USA (with an AT&T sim) and would like to upgrade to 2.2. Kies still does not have an image available so I'm looking to flash it myself but not sure which ROM file to use.
The phone is unlocked and unbranded. The version details are:
PDA: I9000DTJG4
PHONE: I9000DTJG3
CSC: I9000XSAJG2
I've been reading about the I9000UGJK3 image but I believe that installs the Bell branding on the phone, which I'd like to try avoid.
Which image should I be using?
Thanks
Ivan
use information from this topic
http://forum.xda-developers.com/showthread.php?t=810232
to locate your code
then use information from this topic to flash your phone, using the ROM for your phone
http://forum.xda-developers.com/showthread.php?t=853950
if the KIES comes back with no results for Froyo, then that means it has not been released yet for Australia region, and you will have to pick from any of the other flavours available
or stay in 2.1
Thanks for the quick reply.
According to regedit I have a GT-I9000HKAXSA. This doesn't seem to be listed as a "known" product code just yet. Which might explain why Kies doesn't have an update for it yet.
I guess what I'm trying to determine is a) can any image be placed on any phone? b) if yes, then what would be the best image if I wanted to flash my phone and have it work in the USA on AT&T (I'm trying to make sure that my correct 2/3G bands are still going to work post flash)
Dude, I did this tonight and it worked
http://webtrickz.com/how-to-update-...oid-2-2-froyo-via-kies-anywhere-in-the-world/
And I'm in Australia on the optus network
I just couldn't believe the lag and I didn't want to root my phone just yet
I also couldn't believe that Vodafone got froyo straight out of the box!
when it says "refresh" after you've done the regedit bit it means hit your home button. worked straight away
Vodafone straight out of the box?!? Where did you hear that? Not true I'm with vodafone australia and we got eclair, I did the reg edit to get XXJPO like you
Sent from my GT-I9000 using XDA App
Thanks Guys, I managed to sort this by using Odin and putting I9000XWJPA on it. Almost bricked the thing b/c I didn't read all the documentation completely!
Seems to be working like a charm at the moment.
sorry but looked through quite a few pages about the 2.2.1 upgrade and is it avaiable on UK 02 or do I have to do something special ??
I am new to the Glaxaxy S and have tried the search so appoligies if the answer is lurking somewhere.
I have plugged my phone in to Kies checked for a firmware upgrade and get the following Current version: PDA:JP6/Phone JP3/CSC: JP3
The latest version is already installed on connected device.
Thanks for looking
Currently it is only rolled out to Product code XEU and CPW if your product is either of those then kies will inform you have an upgrade. The Upgrade is JPY, if your product is not either of those then you will need to use Nodial Registry patcher for Kies to spoof XEU.
HI i upgraded my T-Mobile sgs to the 2.2 firmware using the kies patcher my question is now is there a way for me to default back to the t-mobile 2.2 software?
Regards
Cprl.rst
Yes use the original T mob rom you saved with Kies Patcher .
Then update to current TMob via standard Kies .
NO SAVED ROM
Read Kies Patcher and find out how to spoof registry and or flash back to Eclair using Odin and then update via standard Kies update .
jje
do you know what the uk t-mobile eclair code is
Cprl.Rst said:
do you know what the uk t-mobile eclair code is
Click to expand...
Click to collapse
Nope probably TMobile have a user forum .
jje
does anyone know where i could get hold of t-mobile 2.2 samsung galaxy s firmware? or the 2.1 either would be good
Backup original ROM
Is there any way to backup my original (branded) ROM?
I intend to flash another ROM on my phone, the I9000BVJJPD one, which is the same a friend of mine has on his phone, an i9000B from Brazil. He got the 2.2 upgrade via Kies, but mine didn't, so I contacted Samsung and they said that my phone was branded and so it couldn't get the upgrade.
Since both are basically the same models, I wish to flash to the unbranded ROM, but I'd like to keep my original ROM as backup in case something goes wrong. Since it's not available in the web, how can I make the backup myself?
By the way, my current version, from *#1234# is I9000BVJJI1
Hi all.
Could anyone tell me why I cant update my samsung Galaxy s to 2.2,
its on o2 but the phone was on orange if thats any help.
Iv downloaded kies and it says there are no updates for my phone so can you help me?
Ive updated my girlfriends phone and she has got the same phone me
She can update it again now.
Allso we cant send mms:mad
Pete.
Hey there
Responding to you're message.
Im having this same problem with my girlfriends phone.
Everytime I try to update her phone it says that it cannot upgrade her phone.
I updated mine to 2.2.1 now. Her phone is still on 2.1-update.
Her buildnummer is I9000XXJF5.
Either she does not recieve my MMS.
Very strange.
P.s. Im from holland, and the phone arrived in Germany Language.
Please, need some help.
Your apn settings will be different on o2 if the phone is from orange which is why probably both internet and mms doesnt work.
Don't know why kies isn't playing ball, make sure u have the latest version.
I'd suggest changing to a stock firmware from samsung. E.g. The latest jpy firmware.
First thing is to check the 3 bitton combo works, if it doesn't then there is a really simple windows based fix for this on this forum that doesn't require any programming or command line stuff.
Next, visit samfirmware, sign up free, download odin and firmware. Follow instructions to a T. Install jpo firmware first as it's v2.2 then you can go for jpy as the v2.2.1 is really a vast speed increase.
Sent from my GT-I9000 using XDA App
Thanks for getting back,
Ive done all the setting with o2 and still dont work.
I did the three button combo and reset my phone and put all the setting back in still no good.
Ive done all this visit samfirmware, sign up free, download odin and firmware. Follow instructions to a T. Install jpo firmware first as it's v2.2 then you can go for jpy as the v2.2.1 is really a vast speed increase but it would not download.
My phone numbers Pda jf3 Phone jf3 and Csc je5 if this helps
Cheers Pete.
If your phone is O2 UK you get update to )2 firmware .
If its an Orange product code phone you need to check Orange has updated the firmware .
jje
you could always do what i did with my o2 uk phone that wouldn't upgrade to latest version...im guessing that you may still be on JM1 software? [thats what mine was].
all i did was download the Kies registory patcher and use it to tell kies that i was on XEU firmware. next time i connected to kies it told me there was an upgrade available to JPY [2.2.1].
hope this helps, Matt
Settings for O2 UK Kies Reg Patcher
SoftwareRevision
was
I9000ADJM1/I9000O2UJM1/I9000ADJM1/I9000ADJM1
ProductCode
Was
GT-I9000HKDO2U
HIDSWVER
Was
"I9000ADJM1/I9000O2UJM1/I9000ADJM1/I9000ADJM1"
DEVCONINFO
Was
" MN(GT-I9000);VER(I9000ADJM1/I9000O2UJM1/I9000ADJM1/I9000ADJM1);HIDVER(I9000ADJM1/I9000O2UJM1/I9000ADJM1/I9000ADJM1);PRD(GT-I9000HKDO2U);SN();IMEI(***********);PN(*********** );CON(AT,
Updated O2 firmware and using Kies Reg Patch take the chance to save the downloaded rom .
jje