[Q] status 7 when installing cyanogenmod? htc g1 - G1 Q&A, Help & Troubleshooting

im rooted using androot,i have rom manager free and have done the clockwork and nandroid backups and followed all instructions and it just wont work and always says "status 7" when installing through clockwork
its my first time trying any of this.
phone: htc g1
build number:dmd64
firmware 1.6
cyanogenmod 6.0.0
any help would be greatly appreciated!!!!!!

I am also getting this error!
E:Error in /sdcard/update-cm-6.0.0-DS-signed.zip (Status 7)
Click to expand...
Click to collapse
Here's some info from my device.
DREA100 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-2.22.23.02
Sep 2 2008

maybe?
read this link and maybe it will shed some light on the subject if you haven't already read it.
http://forum.cyanogenmod.com/topic/4118-firerat-patch-help/

johnson8cyl said:
read this link and maybe it will shed some light on the subject if you haven't already read it.
http://forum.cyanogenmod.com/topic/4118-firerat-patch-help/
Click to expand...
Click to collapse
After reading what you supplied looks like I needed DangerSPL
My HBOOT read 0.95.0000 and it needs to read 1.33.2005
After flashing DangerSPL install went smooth!

dannycsc said:
After reading what you supplied looks like I needed DangerSPL
My HBOOT read 0.95.0000 and it needs to read 1.33.2005
After flashing DangerSPL install went smooth!
Click to expand...
Click to collapse
Glad to hear. Good for you. I suspected something didn't go as u thought originally. Hope all is well
Sent from my HTC Magic SparksMod using XDA App

i have same problem but i did install the dangerspl, im using this tut:
wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_G1/Dream_Firmware_to_CyanogenMod#Rooting_the_HTC_Dream_2
but i dont kn ow maybe something is missing from the root part of that tut?
FIXED , it was a missnamed ROM
(actually wrong ROM with right name lol)

Related

Danger SPL and Drea100 PVT

Can i install the danger SPL on the dream100 pvt or i'm risking to brick the phone? i didn't saw somewhere the guide for this kind of phone....
Thanks in advance
atsic said:
Can i install the danger SPL on the dream100 pvt or i'm risking to brick the phone? i didn't saw somewhere the guide for this kind of phone....
Thanks in advance
Click to expand...
Click to collapse
There is *NO BENEFIT* to it (despite what all the MORONS will claim, it is NOT required for ANYTHING), and regardless of your hardware, there is ALWAYS a risk.
Fact is that the deathspl is NOT COMPATIBLE with ANY HTC DREAM, so don't be using it!
lbcoder said:
There is *NO BENEFIT* to it (despite what all the MORONS will claim, it is NOT required for ANYTHING), and regardless of your hardware, there is ALWAYS a risk.
Fact is that the deathspl is NOT COMPATIBLE with ANY HTC DREAM, so don't be using it!
Click to expand...
Click to collapse
it means that if i would like to install a version of eclaire where everywere is requied a danger spl i don't need this spl? I can install it with any sort of problem without the update of the spl?
thanks
atsic said:
it means that if i would like to install a version of eclaire where everywere is requied a danger spl i don't need this spl? I can install it with any sort of problem without the update of the spl?
thanks
Click to expand...
Click to collapse
All it means is that the rom dev was REALLY LAZY. All you need to do is a VERY MINOR modification and resign to the update.zip. Move some files into /cache and symlink them back.
Or, you could simply use a rom where the rom dev(s) aren't so lazy and actually made the thing to intelligently move files around...
i.e. this one: http://forum.xda-developers.com/showthread.php?t=629932
or this one: http://forum.xda-developers.com/showthread.php?t=624545
(note re the second one: the requirements list shows DEATHSPL. This is NOT the case.)
lbcoder said:
All it means is that the rom dev was REALLY LAZY. All you need to do is a VERY MINOR modification and resign to the update.zip. Move some files into /cache and symlink them back.
Or, you could simply use a rom where the rom dev(s) aren't so lazy and actually made the thing to intelligently move files around...
i.e. this one: http://forum.xda-developers.com/showthread.php?t=629932
or this one: http://forum.xda-developers.com/showthread.php?t=624545
(note re the second one: the requirements list shows DEATHSPL. This is NOT the case.)
Click to expand...
Click to collapse
Im confused. Im not trying to offend you (as maybe Im not getting something), but are you saying that Dwang and Cyanogen ar lazy? After all, they are responsible for Super D 1.8 (which I hear is AWESOME) and it requires the danger spl.
Or is there a better way to flash Super D?
Dai323 said:
Im confused. Im not trying to offend you (as maybe Im not getting something), but are you saying that Dwang and Cyanogen ar lazy? After all, they are responsible for Super D 1.8 (which I hear is AWESOME) and it requires the danger spl.
Or is there a better way to flash Super D?
Click to expand...
Click to collapse
They are not responsible for Super-D but rather their work is the base for it. I don't agree with lbcoder but I understand what he is saying. Lazy is not the choise of words I would choose to use.
billquinn1 said:
They are not responsible for Super-D but rather their work is the base for it. I don't agree with lbcoder but I understand what he is saying. Lazy is not the choise of words I would choose to use.
Click to expand...
Click to collapse
Gotcha. Im assuming then that you have nothing against using the Danger SPL when required (and if the hardware matches)?
Lazy, ignorant, how about a FAKE.
99.9% of rom cookers haven't the FAINTEST idea what they're doing. They haven't written a single line of code in their LIVES and all they do is mix and match APK files in the update archive, put their own personalized B.S. in the build.prop file, and resign the archive.
So "lazy" *IS* the right word. Too lazy to actually learn something of any significance. Note: the work needed to get ANY rom onto a STOCK SPL is quite literally *TRIVIAL*. Drag a few files around, add a couple of lines to the update-script, done.
Dai323 said:
Gotcha. Im assuming then that you have nothing against the Danger SPL when required (and if the hardware matches)?
Click to expand...
Click to collapse
The only hardware that it matches is HTC MAGIC, which is where it was copied from.
lbcoder said:
The only hardware that it matches is HTC MAGIC, which is where it was copied from.
Click to expand...
Click to collapse
Wow. Ok, now I'm a bit paranoid to flash Super D tomorrow on my G1 (waiting on Class 6 micro), as I haven't heard this issue brought up before.
The forums have been chock full of anger lately. Not sure where it all comes from except maybe the weather has people down.
I think the WG roms do not require the Danger SPL so that would be a good choice. Our phones are a very tight fit but some roms do fit just fine.
I am running out of here with my head down! Good Luck.
So no answers that are clearing the situation. Is possible or not to install Danger SPL/ Death SPL over the DREA100 PVT version???
atsic said:
So no answers that are clearing the situation. Is possible or not to install Danger SPL/ Death SPL over the DREA100 PVT version???
Click to expand...
Click to collapse
Yes just follow this guide and you will be fine.
http://forum.xda-developers.com/showthread.php?t=625886
Joe333x said:
Yes just follow this guide and you will be fine.
http://forum.xda-developers.com/showthread.php?t=625886
Click to expand...
Click to collapse
The problem is that on my phone is showed DREA100 PVT and not "DREAM PVT" as the guide says to be. Can i flash anyway?
atsic said:
The problem is that on my phone is showed DREA100 PVT and not "DREAM PVT" as the guide says to be. Can i flash anyway?
Click to expand...
Click to collapse
Which SPL are you currently using? You should be fine since you have a PVT board, its just the DVT boards that cannot use the Danger SPL. When I reboot holding the camera button this is what the top line says
"DREAM PVT 32B ENG S-OFF"
What does yours say?
Joe333x said:
Which SPL are you currently using? You should be fine since you have a PVT board, its just the DVT boards that cannot use the Danger SPL. When I reboot holding the camera button this is what the top line says
"DREAM PVT 32B ENG S-OFF"
What does yours say?
Click to expand...
Click to collapse
holding camera and power button appear
DREA100 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-2.22.19.26I
This in in the upper left corner.
More down and centered is also written Seria10
Hope that is useful.
Are you still on the stock SPL? I just did a little googling and it seems that DREA100 PVT 32B is normal to see on the stock SPL. The key is to know that you have a PVT board, which you do. I would say you should be fine. Check out the link in my sig and ask in that thread and maybe someone else will weight in. The dev section gets a lot more traffic than the q&a section.
Don't let lbcoder scare you, if you know what your doing, DEATH spl is completely safe. Follow Joe's guide, its easy to follow and guaranteed not to screw you up. I've been using death spl for the last few months and my G1 is still running It makes life a helluva lot easier for you just to have it installed, then you won't have to worry about a rom not fitting in your phone. GL
Joe333x said:
Are you still on the stock SPL? I just did a little googling and it seems that DREA100 PVT 32B is normal to see on the stock SPL. The key is to know that you have a PVT board, which you do. I would say you should be fine. Check out the link in my sig and ask in that thread and maybe someone else will weight in. The dev section gets a lot more traffic than the q&a section.
Click to expand...
Click to collapse
Yes of course is the stock SPL.
I posted on the other 3ad too. Thanks anyway!

how to upgrade from super D to latest cyanogen mod

ok, so i bought a used rooted g1 on ebay. The firmware version is 1.6, The baseband version is 65.50sc.20.17u_2.22.23.02 The kernel versioin is [email protected] The mod version is super D-blk 1.10.3 And the build number is Super D.
I dont know if you guys need all that in order to help, but i put it up just in case.
I want to install the latest cyanogen, but im afraid i'll brick the phone. I dont know if danger spl is installed (how do i find out). so can you guys please help me?
thanks in advance
i think i do have danger spl
my spl is HBOOT-1.33.2005 (DREA10000)
so this is what it says in the bootloader...
DREAM PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA10000)
CPLD-4
RADIO-2.22.23.02
Apr 20 2009, 15:30:43
does this mean that im ready to flash cyanogen mod 5?
yerand said:
ok, so i bought a used rooted g1 on ebay. The firmware version is 1.6, The baseband version is 65.50sc.20.17u_2.22.23.02 The kernel versioin is [email protected] The mod version is super D-blk 1.10.3 And the build number is Super D.
I dont know if you guys need all that in order to help, but i put it up just in case.
I want to install the latest cyanogen, but im afraid i'll brick the phone. I dont know if danger spl is installed (how do i find out). so can you guys please help me?
thanks in advance
Click to expand...
Click to collapse
Please use the search next time. But look here: http://bit.ly/b0nn5
put rom on sd card
Wipe everything
flash
TADA
Thanks, i had already been on the cyanogen wiki, but i wasnt sure which instructions to follow... well, its booting now, so THANKS
yerand said:
Thanks, i had already been on the cyanogen wiki, but i wasnt sure which instructions to follow... well, its booting now, so THANKS
Click to expand...
Click to collapse
Follow these: http://wiki.cyanogenmod.com/index.p..._or_other_rooted_ROMS_to_5.0.x(Dream/Sapphire)
Also, superd requires dangerspl so you should be good.
Moved as not Android Development.

Problem with G1 rooted

Hi everybody
I rooted a G1, I downgrade it with 29RC, then I made the installation of the recovery-RA-dream-v1.7.0 following the flashed the radio (G1-radio-2_22_23_02 and the spl (Latest G1 SPL). I used the 1.6 DRD 3611745 test-keys rooted firmware.
Everything is working well, but when I try to install a firmware as update-cm-6.0.0-DS-RC3-signed, Chromatic 4.4 or extreme-froyo an error showed:
Code:
getprop("ro.bootloader")=="1.33.2011" II ( this message is repeated on the G1)
E:Error in /sdcard/update-cm-6.0.0-DS-RC3-signed (Status 7)
Installation aborted.
Also I tried to update it with update-cm-5.0.7-DS-test3-signed and it was accepted but it does not boot, it stay with the G1 logo.
What could be wrong?, I restore with my rooted backup (1.6) and it work again without problems.
Your comments with be appreciated.
bengar
bengar said:
getprop("ro.bootloader")=="1.33.2011" II ( this message is repeated on the G1)
Click to expand...
Click to collapse
Since no one else has answered I'll give it a try. The 1.33.2011 bootloader line sounds fishy on a G1. What does the actual bootloader screen say? (Camera+Power startup)
oldnoob said:
Since no one else has answered I'll give it a try. The 1.33.2011 bootloader line sounds fishy on a G1. What does the actual bootloader screen say? (Camera+Power startup)
Click to expand...
Click to collapse
Thank you oldnoob for the response. Well it looks like this:
Code:
DREA100 PVT 32B
CLPD-4
RADIO-2.22.23.02
Oct 20 2008
Ok what he is mainly asking you is in bootloader you see the spl. That's what he's saying looks fishy. The rest of what you got looks ok. So tell him what spl your reading in bootloader. And what your bootloader looks like.
sent from my superfroyo dream
Xx12thANG3LxX
Thank you, the spl read as follow:
HSPL10.95.3000
Ok well you know you flashed the radio if it says 2.22.23.02. You have the pvt goin on. So now for the scary part. 1.33.2005 danger spl. As long as you have that radio your good. But make sure ya hear me!!!! When you flash rc29 it will downgrade that radio. So you have to reflash it. BEFORE danger spl 1.33.2005
Good luck may the force be with you!!!
sent from superfroyo dream
So just make sure you go into bootloader holding camera+power button together. Make sure you have radio 2.22.23.02 then you may flash the 1.33.2005 danger spl. Then when you go back into bootloader you'll see the new spl. And the bootloader will have three android skateboarders on it. Then you know your good. And then boot recovery. Wipe. Flash the rom .zip from sdcard. See the problem your having is the spl you have right now. Can't handle the size of the rom your trying to flash.
sent from superfroyo dream
Xx12thANG3LxX said:
So just make sure you go into bootloader holding camera+power button together. Make sure you have radio 2.22.23.02 then you may flash the 1.33.2005 danger spl. Then when you go back into bootloader you'll see the new spl. And the bootloader will have three android skateboarders on it. Then you know your good. And then boot recovery. Wipe. Flash the rom .zip from sdcard. See the problem your having is the spl you have right now. Can't handle the size of the rom your trying to flash.
sent from superfroyo dream
Click to expand...
Click to collapse
Xx12thANG3LxX
Thank you very much, that was the problem as I see I used a wrong spl. But when I hold the camera+power button together I have the three android skateboard on it. Right now I have the G1 with the 1.6 version rooted. In order to make it works for future firmware versions I will need to unroot the G1 with downgrade it again to the RC29, then downgrade the original radio and spl and start from scratch. Or only reflash the new radio and reflash spl but using the danger version.
PD
This G1 is not my is from a friend, but compared with my G1 and it has the danger spl, I will need to reflash the danger spl to my friends' G1.
regards
bengar
Xx12thANG3LxX said:
Ok well you know you flashed the radio if it says 2.22.23.02. You have the pvt goin on. So now for the scary part. 1.33.2005 danger spl. As long as you have that radio your good. But make sure ya hear me!!!! When you flash rc29 it will downgrade that radio. So you have to reflash it. BEFORE danger spl 1.33.2005
Good luck may the force be with you!!!
sent from superfroyo dream
Click to expand...
Click to collapse
Why you guys want to install always DangerSPL? It's never needed, there are much more flexible and more secure ways to get enough space for FroYo-ROMs.
Only my 2 cent.
Andisa has a point. Not super needed anymore. But its just what I run. And once you got it the first time. No headache or chances after that. But no when you change roms you do not need to go and do that all over again to answer your question. So now if you have the proper radio and spl. You installed a custom recovery. Now go ahead put zip file on sd wipe and flash. You should be good to go.
sent from superfroyo dream
Xx12thANG3LxX said:
Andisa has a point. Not super needed anymore. But its just what I run. And once you got it the first time. No headache or chances after that. But no when you change roms you do not need to go and do that all over again to answer your question. So now if you have the proper radio and spl. You installed a custom recovery. Now go ahead put zip file on sd wipe and flash. You should be good to go.
sent from superfroyo dream
Click to expand...
Click to collapse
Xx12thANG3LxX
In my own G1, I have the danger spl installed too and never have had any problems with it, in this case, when I was flashing this G1 I knew that I was using the last radio but when I was ready to flash the spl I saw that I had two versions, the Latest G1 SPL, and haykuro_new_spl-signed.
I had selected the Lastest G1, After that I flashed with the last roms mentioned above and here I am trying to fix this. All the ways, the 1.6 is running smooth. Thank you for all and I am very happy to all your help.
bengar
No problem. I'm glad we got it working for ya
sent from superfroyo dream

[Q] G1 won't load ROM

OK so finally loaded a ROM (SuperFast1.3.3RHJ.zip) but found it was actually kind of slow...sorry. So I thought I would load another ROM (TMUS-G1-Froyo-CM6Remix.zip) so from the "phone with !" I did a ALT+W the proceeded to install the ROM, but after in finished successfully i rebooted with HOME+BACK, and it went into the "phone !" pulled battery and tried again, no go tried installing another ROM (SuperF-1.zip) same way but still getting stuck on the "phone with!" I can get to the "three skateboarders" but ROM wont load.
PLEASE HELP
TexasMan80 said:
OK so finally loaded a ROM (SuperFast1.3.3RHJ.zip) but found it was actually kind of slow...sorry. So I thought I would load another ROM (TMUS-G1-Froyo-CM6Remix.zip) so from the "phone with !" I did a ALT+W the proceeded to install the ROM, but after in finished successfully i rebooted with HOME+BACK, and it went into the "phone !" pulled battery and tried again, no go tried installing another ROM (SuperF-1.zip) same way but still getting stuck on the "phone with!" I can get to the "three skateboarders" but ROM wont load.
PLEASE HELP
Click to expand...
Click to collapse
Phone model? Spl? Radio? And get amon ra recovery.
shadowch31 said:
Phone model? Spl? Radio? And get amon ra recovery.
Click to expand...
Click to collapse
Did you seriously ask him his phone model when you are in the G1 Q&A AND it says it in the title? And clockwork is better IMHO. More seamless installations.
DREAM PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA10000)
CPLD-4
RADIO-2.22.19.261
April 20 2009
TexasMan80 said:
DREAM PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA10000)
CPLD-4
RADIO-2.22.19.261
April 20 2009
Click to expand...
Click to collapse
Catch me on my irc channel, link in sig.
And yes I did ask him even when it said it right there in front of me, it's called skimming the post and the fact mt3g users use this forum also.
ok, so I'm trying to go back and unroot, because of multiple tries with help of shadowch31 to load good recovery no go. followed this guide: http://theunlockr.com/2010/09/23/how-to-unroot-the-htc-g1-dream/
did the spl and that went through but when i try and do the DREAIMG.nbh it goes to the tri color and jumps to the white loading screen for a second and then over to the tri color screen, I think it's not recognizing the file. PLEASE HELP

[Q] No recov, No fastboot, but I have OS

I have a Rogers Dream/G1 with T-Mobile rc29 rom (doh!), which works and is usable but I want to get back to CM5. Please show me the way or put me out of my misery if its hopeless.
Recovery hangs at Tmobile G1 screen.
Fastboot gives me "00028002 Not Allow" code then is stuck with serial0.
DREA210 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.12.29
Tried Adb to get amon-ra 1.7.0, but still won't boot into recovery and is stuck at G1 screen. No memory error, just an immediate echo of the "flash_image recovery data/local/recovery.img" command after I hit enter.
fastboot won't show my device in cmd when at the 4colored screen but adb does recognize.
I'm pretty sure I mixed up the radio and spl, but does having access to the OS give me any options?
Please, point me in the right direction.
****SOLVED**** see Post#20 for my conclusion.
Download clockwork recovery, flash clockwork, then you'll have recovery?
Not sure tho, I think this was how I did it.
I think what you're talking about is ROM Manager, it includes Clockwork Recovery if I understand the dev's description correctly. I haven't tried it myself though.
Seems to me, that he is on a stock ROM and doesn't have root access.
If the phone is booting, a chance could be, to install 1-click-root (don't know how it is called exactly, but you can google for it) and then from there to install a custom recovery. After that, you can install CM5 or something else. Probably first I would install is an engineering SPL (1.33.2003 for example) which supports fastboot. With your current SPL you will not have a chance to get fastboot running.
But be careful: 1.33.2003 supports only radio version 1.x and 2.x. I am not sure if 1.33.2003 is the best solution for you, because you have a rogers dream.
i recomend the old way.. get the fflashrecapk. and use io file manager to flash it.. only problem is you need to be 1.5 if your on 1.6 than you need to downgrade.. but that would be difficult since you have no recovery lol
While a bit more work.. before all the how to's confuse you into bricking your phone, I'd make yourself a gold card, and use it to flash the orange nbh from the 2708+ thread.. (rename to DREAIMG.nbh and place on the goldcard, then boot with camera+power it will ask you to flash it)
Once you have the orange rom you will have fastboot and a 2.x radio.. if you don't need the 3.22 radio .. just flash the 2708+ radio+spl+hboot as per normal followed by a rom.. if you do need the 3.22 radio (rogers customer who has not signed the wavier and wishes to keep data) either flash the rogers e911 update and re-root or 1.33.2005+3.22.26.17 and a rom
Sorry lack of links.
is it rooted?
maybe you can flash the recovery through terminal
Thanks for the replies, lots to research.
I'v tried a bunch of rooting methods.
exploid pushed from ADB said it worked (but didnt)
SuperOneClick said it worked after some rapid OFF-ON-OFF-ON debugging(but didnt install superuser even after reboot)
Universal androot forcecloses on launch
flashrec has the "download cyan...." button blocked out, tried renaming amon-ra to the recovery-backup.img and it said successful, but still is stuck at g1 screen.
I found another post with someone in the same situation at:
http://forum.xda-developers.com/archive/index.php/t-580669.html
They did the same thing by flashing the tmobile firmware 1.0 and we have the same numbers:
Model Number: T-Mobile G1
Firmware version: 1.0
Baseband Version: 62.33.20.08H_1.22.12.29
Kernel Version: 2.6.25-01843-gfea26b0 [email protected]#6
Build Number: kila-user 1.0 TC4-R29 115247 ota-rel-keys,release-keys
When I start up (CAMERA + POWER) I get the following settings (on red/green/blue/white screen *sigh*)
DREA210 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.12.29
Sep 2 2008
Serial 0
Funny thing is I was so excited when SuperOneClick said it was successful and asked if I wanted to donate that I didnt even check if I had superuser before going through paypal. I'v wasted so many hours on this dinosaur G1 but damn I want it back to CM5. Please continue with the help.
kl3vr said:
Thanks for the replies, lots to research.
I'v tried a bunch of rooting methods.
exploid pushed from ADB said it worked (but didnt)
SuperOneClick said it worked after some rapid OFF-ON-OFF-ON debugging(but didnt install superuser even after reboot)
Universal androot forcecloses on launch
flashrec has the "download cyan...." button blocked out, tried renaming amon-ra to the recovery-backup.img and it said successful, but still is stuck at g1 screen.
I found another post with someone in the same situation at:
http://forum.xda-developers.com/archive/index.php/t-580669.html
They did the same thing by flashing the tmobile firmware 1.0 and we have the same numbers:
Model Number: T-Mobile G1
Firmware version: 1.0
Baseband Version: 62.33.20.08H_1.22.12.29
Kernel Version: 2.6.25-01843-gfea26b0 [email protected]#6
Build Number: kila-user 1.0 TC4-R29 115247 ota-rel-keys,release-keys
When I start up (CAMERA + POWER) I get the following settings (on red/green/blue/white screen *sigh*)
DREA210 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.12.29
Sep 2 2008
Serial 0
Funny thing is I was so excited when SuperOneClick said it was successful and asked if I wanted to donate that I didnt even check if I had superuser before going through paypal. I'v wasted so many hours on this dinosaur G1 but damn I want it back to CM5. Please continue with the help.
Click to expand...
Click to collapse
ok ummm wow you did a lot lol are you sure you did the flaskrec.apk thing right? so as of right now your phone is not rooted? and you are on 1.0? if thats the case you should get automatic updates and hopefully that could help you.. if not try downloading rom manager than flash the clockwork recovery.. personally i hate clockwork but if you can get that to work than i could help you get back to RA if you would like..
Well its a one-click solution, I must have missed the options... I installed it and ran the back up, but the "download" button was grayed out. was I supposed to do something with the entry field?
Rom Manager gives me "Application install unsuccessful" using AndExplorer and I think Clockwork gave me this problem in the first place back when I was using CM6.
kl3vr said:
Well its a one-click solution, I must have missed the options... I installed it and ran the back up, but the "download" button was grayed out. was I supposed to do something with the entry field?
Rom Manager gives me "Application install unsuccessful" using AndExplorer and I think Clockwork gave me this problem in the first place back when I was using CM6.
Click to expand...
Click to collapse
I think Ezterry's post (#6) is your best option
you don't mention you have tried that
you will need to do some research into goldcards and finding the orange.nbh link
hint for the orange see threads started by ezterry (via his profile) look at the kernel for 2708 thread
Ok thanks, I'v got my gold card made but is safe to flash 1.33.200* SPL with 1.22.12.29 Radio? Isnt it a DangerSPL? Sorry if thats way off base.
kl3vr said:
Ok thanks, I'v got my gold card made but is safe to flash 1.33.200* SPL with 1.22.12.29 Radio? Isnt it a DangerSPL? Sorry if thats way off base.
Click to expand...
Click to collapse
for the record
1.33.2003 is compatible with 1.x and 2.x radios but will brick with 3.x
1.33.2005 is compatible with 2.x and 3.x radios but will brick with 1.x
so 1.33.200* is only compatible with 2.x
read Ezterry's 2708 post, the answers you seek are in it
sorry for delay lol but with the flashrec file wat you do is press backup than when your typing in the box you have to put exactly what your file says...
ex.. sdcard/recovery-RA-dream-v1.0.7-cyan.img (yours could be diff but make sure you type exactly what your file says that you placed on sd card) hope it helps
You guys are awesome, thank you everyone who was interested and especially ezterry, Effdee and Idrifta for the enduring help. I'm now on CM5.0.8 2708+ and loving it.
Final issue, I'm wondering about going to EBI1 to get 3.22 radio. Is it as simple as updating hboot to 1.33.2010 then flashing 3.22? Is it worth doing?
Again, sorry if that is way off base but this is the first week my phone has been usable in months, and I won't jeopardize it again.
New phone specs:
DREA PVT 32B SHIP S-ON
HBOOT-1.33.0013d (DREA21000)
CPLD-4
RADIO-2.22.27.08
Recov: Cyan1.7
Rom: CM 5.0.8 - 2708 port
Thank you,
-kl3vr
kl3vr said:
You guys are awesome, thank you everyone who was interested and especially ezterry, Effdee and Idrifta for the enduring help. I'm now on CM5.0.8 2708+ and loving it.
Final issue, I'm wondering about going to EBI1 to get 3.22 radio. Is it as simple as updating hboot to 1.33.2010 then flashing 3.22? Is it worth doing?
Again, sorry if that is way off base but this is the first week my phone has been usable in months, and I won't jeopardize it again.
New phone specs:
DREA PVT 32B SHIP S-ON
HBOOT-1.33.0013d (DREA21000)
CPLD-4
RADIO-2.22.27.08
Recov: Cyan1.7
Rom: CM 5.0.8 - 2708 port
Thank you,
-kl3vr
Click to expand...
Click to collapse
hey no prob glad to help!! how did you end up fixing it? haha just curious
kl3vr said:
I'm now on CM5.0.8 2708+ and loving it.
Final issue, I'm wondering about going to EBI1 to get 3.22 radio.
Click to expand...
Click to collapse
Why ebi1 is equivalent to the old ebi0 and you loose the extra ram.
Thus unless there is a very specific reason it's a downgrade
kl3vr said:
New phone specs:
DREA PVT 32B SHIP S-ON
HBOOT-1.33.0013d (DREA21000)
CPLD-4
RADIO-2.22.27.08
Click to expand...
Click to collapse
Best stay as is or upgrade the radio to 2.22.28.25.. As it has been distributed world wide. (Including to all locations 2.22.27.08 was previously distributed)
what did you do?
I would like to know if you solved this issue as mine is similar. I DO have root though, but i have no recov/fastboot. I am using a dev phone though.
ps, grats on getting it working
cacaface said:
I would like to know if you solved this issue as mine is similar. I DO have root though, but i have no recov/fastboot. I am using a dev phone though.
ps, grats on getting it working
Click to expand...
Click to collapse
If you flashed 0.95.0000 you are no longer using a dev phone (what do you see when you boot holding camera?)
The good news is that the ADP1 used the universal CID (11111111) and is thus not restricted to a particular carriers nbh file.. so you can probably just flash the orange nbh without the goldcard [just renamed DREAIMG.nbh on the root of your SDCard], then follow the 2708+ radio instructions.. or install 1.33.2003/5 via fastboot if you need the old radio.
The reason I'm pointing to the orange nbh is it will let you bypass the whole "I bricked my phone because I insisted on flashing death SPL via recovery" since you have an engineering SPL and 2.x radio after flashing that orange NBH from the 2708+ thread.
This is what worked for me, going from:
- a non responsive recovery
- OS locked at activation, so no usb debugging
- OS refused to root
- quadicolored fastboot screen that wouldnt recognize usb
To CM5 2708+ with RA-cyan1.7.
Before this thread I had to use this to get post the verizon data plan only activation to enable usb debugging.
Made a goldcard
Put the orange nbh renamed to DREAIMG.nbh (can't remember where i got it from, just searched) on the goldcard, Booted with camera+power to get fastboot, and applied the update.
Followed ezterry's post and at step 5 flipped over to this post on CM5 2708+
Now I'm gonna update the radio using exterry's advanced zips. Thanks again everyone, another successful thread.

Categories

Resources