Database Develop

TYTN2 micros sd card not recognised

Help,
After i flashed my KAISER i have a problem. The sd card is not recognised anymore. Is there a solution for this problem?
I hope so, otherwise i have a brick

Storage card problem
I always used a 4 gig card, just tried an 512 mb card, and that one was recognised. Strange isn't it?

First, which method did you use to flash your new ROM?
If you used the USB method to flash your new ROM, did you remove your SD card during the flash process?
If you used the SD card method to flash your new ROM, did you do a hard reset with your SD card inserted?
Second, do you have an SD card reader for your computer? I would probably try to verify that the file system and data are intact on your SD card. If you have an SD card reader, you can also use it to reformat your card.
If none of this is helpful, provide some more information to fill in the gap between your microSD card working properly and not showing up on your phone.

Re
I flashed to TPCV5.1 full today. No sd in my phone.
My cars reader in the computer doesn't recognise the sd card either.
Strange thing is , when i use an other 4 gig sd card, the phone still doesn't recognise it, my card reader on my computer does, so why not on my phone.
I had a 2 gig sd card, and put all the data again on it, and it's working.
Stilli have a problem that my phone won't recognise a 4 gig sd card.
So far my story.

Does seem odd. What file system is your 4GB card formatted with? If it shows up as "RAW" or anything, I would definately format it to FAT32.
Edit: I was referring to your "other" 4GB card. I don't think I have any advice for the original one.

Having memory card problem

Hi, basically I put my 512mb micro sd card in to my X1 and then check if it is working, but it says Not Installed.
I tryed another card and same problem. I have formatted to fat32 and still same problem. But when I put my phone in to Disk Transfer it says insert memory card etc. but on my Windows machine it shows me the memory card.
It seems like software to me, is there anyway of fixing this?
I have also installed the HARD SPL to install a new ROM but unable.
Anyhelp is great

help me please my hd2 could not detect memory card

hi i installed wp7 then after it i go back to win mo 6.5
but my device can not detect my micro sd card i format it and i change my sd card with new one but my device said no sd card include in tools format sd card said # the storage card has been damaged and unable to be formated #
i do every thing after this problem with my device changing rom install nand android and re install wp7 but non of them can detect memory card i do hard reset , task 29
is it soft wear problem or hard wear problem????
please help me urgent

So you are saying that you previously had WP7..So after changing ROM (windows 6.5 or Android) you need to format your card with Panasonic SD formater so it can read the full capacity of your card....BUT.....! You are saying that you did all this steps and still your device doesn't recognize your sd card and also you changed the card with a new one! HMMMMM......
Most probably a hardware problem (sd card holder and reader in the device)
Imo something went wrong with Installation or so! Dunno!
Some guys here said that WP7 will burn your card or something!
What SD cards did you use?
Anyone else that experienced this problem????

hi
i use 8 gb sandisk micro sd memory when i put memory in my divice in stting sd card & phone storoge show no sd card
when i connect my phone to pc mass storage showe mass storeg but when i click it no data sho and my system tell please inset meomry
when i want format my sd card from my phone th phoe alert the storage card has boon damaged and unable to be formated
is this the hard wear probiem or soft wear problem
please tell me what can i do
if it's hard wear problam can i chang my sd card slot or i should change my phone mother board?????
help me as soon as posibel

SD card broken? Wad the?

hi all~ last night , i turn on my phone and there's a warning saying sd card broken please format , i 've encountered this problem two times before and i just formatted it because the SD card was rather empty that time and i thought it would be fixed after i format it , but now after downloading a ton of songs i can't afford to redownloading them , so is there a solution and why is this happening?i now use an old 2GB memory card and all is fine so far ..
specs
rom:GDX v21
memory card : 8GB class 10
kernel:stock

[Q] External SD Card issue: loosing data

I experiencing a very annoying problem with my external SD card.
It seems I am not the only one: http://talk.sonymobile.com/t5/Xperia-Z1-Z1s/Z1-destroy-files-on-SD-card/td-p/418011
Basically I loose random data when I store them on external SD card.
Many random data: let's say about 30-40% of what I stored.
This happens:
* if I copy data from internal memory to external direcly with the phone
* if I copy data from the PC to external card using USB connection while the card is in the phone
* even if I copy data onto the card and THEN insert it into the phone
The SD card is a brand new Samsung Class 10 64GB and I tried also with an old 32GB Sandisk with the same result.
I formatted the card either exFAT or FAT32 and in both cases I can fill it without loosing a single byte with the PC.
I am on .157 stock firmware (only rooted to use Titanium Backup and a few tools) but I had the same problem with .133.
Any possible solution in your expert opionions? It is really frustrating to have only 11GB storage in such a great phone!!!

Got three guesses
It does not correctly unmount the card when connecting the phone to the PC in Mass Storage mode
Kernel Bug. On exFat I would expect that, not on fat32. Can be ruled out if it does not happen with custom roms
Voltage on the SD Card suddently drops for some hardware design reason. Should happen on all ROM's
Sounds like some testing is needed? For example #2 is easy to test when someone with the problem flashes a custom rom with and tests the same sd card again.