I successfully flashed my device from JG2 to JPK, but now my internet isnt working and also it says phone number is unknown. Does that mean I flashed with wrong csc and my product code got f**ked up?
My prevoius FW:
PDA: I9000BUJG2
Phone: I9000BUJG1
CSC: I9000VFGJG1
Current FW:
PDA: I9000XXJPK
Phone: I9000XXJPK
CSC: I9000OXAJPK
build 2010.09
Got any ideas on how to make this right? I can't download market apps so I'm kinda screwed. :/
You need to set your APN settings, ask your service provider for those & you will connect to the internet.
I did that and now my internet works again, thanx!
Now as for product code, I should just follow this guide?
http://forum.xda-developers.com/showthread.php?t=787163
davor175 said:
I did that and now my internet works again, thanx!
Now as for product code, I should just follow this guide?
http://forum.xda-developers.com/showthread.php?t=787163
Click to expand...
Click to collapse
Yep, that should work fine.
Related
Hi all,
Me and myfriend have the same galaxy s, and we did next...
We wanted to enable 3 button combo, and DID NOT READ ENOUGHT so:
A month ago, on my phone we changed registry of kies, so kies thought we are in Canada, and sucesfuly updated frimware trough kies.
Than we realized that I have Canadian Bell frimware, which is not fuly suported in our country, and tried to rollback frimware.
In midtime, I tried *#272*hhmm#, and used option BMC, whitch preconfigured my phone, like I bough it in Bell. WTF, i had bell app on my phone...
Than pain started.
I was playing with odin.. Tried several frimwares, had some serious issues with signal reception ( in area with 2/3 of signal strenght, had no signal), market did not work, or did not wont to download anything..
******
Bricked phone several times
******
Whic by the way, proved me, that this phone is fabolous, because it is sofware indestractuble... (ONLY THING TO WATCH OUT ---- FULL BATERY, AND ENABLED 3 BUTTONS COMBO---)
And after few days of resarching, used ROMmanager, backuped friends Galaxy S, put in my phone, used backup, and evrything works fine.
EXCEPT
PHONE: I9000XXJM1
I have on my phone PHONE: I9000XXJG1
Does have enybody an idea, where to take I9000XXJM1, from friends I9000, where on his phone could it be found?
The problem is, that baseband version and PDA/CSC do not match, and kies regpatch does not anymore work.
On my phone, I have:
PDA: I9000XFJM3
PHONE: I9000XXJG1
CSC: I9000OXFJM1
and I should have:
PDA: I9000XFJM3
PHONE: I9000XXJM1
CSC: I9000OXFJM1
P.S. I used again *#272*hhmm# set the sealer code VIP, sealers code is fixed, but baseband version is still unchanged.
http://www.samfirmware.com/WEBPROTECT-i9000.htm
You will have to register if you have not done yet, but you can find the firmware your search for there.
Also, you didnt "brick" your phone. Bricked means its broken, wont turn on, wont allow to be flashed and is a paperweight and needs some kind of hardware replacement. I would use the term screwed up the phone, or hooped it, or f'd it up But bricked is the incorrect term
Cheers!
Tnx for the try, but i need
PDA: I9000XFJM3
PHONE: I9000XXJM1
CSC: I9000OXFJM1
I looked there and there is no I9000XFJM3...
My question was, if u have on your phone
PDA: I9000XFJM3
PHONE: I9000XXJM1
CSC: I9000OXFJM1
can u take PHONE: I9000XXJM1, and put it on another device, I managed to do it with PDA and CSC..
When I type *#1234# to check out what pda/phone/csc version i got, it comes up as this:
PDA :
PHONE: I9000XXMJ4
CSC :
I flashed to JM8 to update through Kies again, but Ive tried other roms aswell, with same result.
Tried the manual part from here but without any luck, my phone said "MUST BE THREE LETTERS!" or something, it showed at top "XEE" and below was just a empty spot, with a dot to the right i could click on, but that didnt helt neither, and neither did it to press the XEE.
Ive tried Kies-registryhack to update the phone, without any luck.
With using *#*#44336#*#* i get:
INTERNAL VERSION
VERSION:
PDA: I9000XWJM8
PHONE:I9000XXJM4
CSC: Unknown
Build time 2010.08.31. (weird sign) 09:45:32 kst
Changelist: Unknown
With using *#*#4986*2650468#*#* i get :
PDA : I9000XWJM8
approved PDA :
Phone: I9000XXJM4
H/W : MP 0.800
RFCallDate: 2010.6.14
CSC : Unknown
approved CSC: Unknown
Anyone know how to fix this issue with PDA and CSC? and also make it update through kies?
Edit: I figured out that I didnt try with the kies registry patcher program yet, did that and it worked flawless, phone now says JPA, wich is latest one in sweden, and csc is recognized aswell. Problem solved!
Hi,
I'm newbie with SGS, I tried to flash an official italian firmware 2.2.1 with Odin and 3 files. Everything appears ok, but now the phone module don't starts. On notification bar only a no-entry sign. Wifi works fine.
With *#1234# shows:
PDA: I9000RSJS2
PHONE: UNKNOWN
CSC: I9000ITVJS1
BUILD INFO: 2011.01
With *2767*4387264636# shows:
service mode... nothing.
Originally, the product code was from a portuguese device, the firmware a 2.1-update1 release.
Any chance to recover the situation? The phone enters in download & recovery mode...
Have you checked to see whether your APN settings are correct?
Inverno said:
Hi,
I'm newbie with SGS, I tried to flash an official italian firmware 2.2.1 with Odin and 3 files. Everything appears ok, but now the phone module don't starts. On notification bar only a no-entry sign. Wifi works fine.
With *#1234# shows:
PDA: I9000RSJS2
PHONE: UNKNOWN
CSC: I9000ITVJS1
BUILD INFO: 2011.01
With *2767*4387264636# shows:
service mode... nothing.
Originally, the product code was from a portuguese device, the firmware a 2.1-update1 release.
Any chance to recover the situation? The phone enters in download & recovery mode...
Click to expand...
Click to collapse
Phone should be I9000XXJPY, like all european 2.2.1 ROMS
Try to flash the modem only, check in ODIN that it lists modem.bin as being copied to the device.
Yes, I've tried to reflash a h3g rom (I have a h3g sim).
And it is not an apn problem, I can't access the phone signal at all, I get only a no-entry simbol on tray notification and can't make calls. Now it's getting to be a bit worried...
vcespon said:
Phone should be I9000XXJPY, like all european 2.2.1 ROMS
Try to flash the modem only, check in ODIN that it lists modem.bin as being copied to the device.
Click to expand...
Click to collapse
Hi,
originally I think to remember something like WTY, or WTI... in the box there are 2 manuals, 1 in english and 1 in portuguese... that's why I thought it could by portuguese firmware. The one I fashed was JPY, like you said.
The roms I downloaded in the package contains a modem file in this format: MODEM_I9000XXJPY.tar.md5. Not .bin. Can I flash it alone, with no pit file and "re-partition" option disabled? That's correct?
Thanks to all for your attention.
Another try, I flashed a JP1 radio from recovery, the process has gone well, but the phone still seems to not recognize radio. After *#1234#:
PDA: I9000RSJS2
PHONE: UNKNOWN
CSC: I9000ITVJS1
BUILD INFO: 2011.01
The telephone does not show the IMEI with *#06#... nothing.
Have to send it to assistance?
I have a 2 week old Galaxy Tab which Kies refuses to update I did not mess with it in any way, no root, no aftermarket firmware whatsoever...
Current firmware version: PDA:JMG / PHONE:JMA / CSC:JM6 (LUX)
Model number: GT-P1000
Firmware version: 2.2
Baseband version: P1000XXJMA
Kernel version: 2.6.32.9; [email protected] #1
Build number: FROYO.XWJMG
I got it in Belgium which is where I live but the firmware version says LUX which I assume means Luxembourg. Could this be my problem?
*#272*IMEI# choose your country CODE and press install , this is will wipe everything in your tab .... then check the kies after that
Thanks! I'm trying this as we speak, do you have any idea which sales code to use for Belgium? I tried EUR, it seems logical (Europe?), but I will try them all if I have to -- I'll report back later
Edit: it's not EUR, it shows some weird alphabet, Greek I think I'll keep trying!
Edit 2: PHN gave a Dutch interface but Kies refused to update it as well, so I'll keep on trying different codes
So I tried doing the sane thing (instead of checking each code separately and waiting 2-3 minutes for the device to reset) and looked up every code and the corresponding country. Here's what I got:
YOG (Spain)
XEO (Poland)
XEH (Hungary)
VDH (Hungary)
TPH (Portugal)
SUN (Switzerland)
PHN (Netherlands)
OPT (Portugal)
MOZ (Switzerland)
LUX (Luxemburg)
IRD (Slovakia)
FOP (Spain)
EUR (Greece)
CYO (Cyprus)
COS (Greece)
AUT (Switzerland)
ATO (Austria)
No Belgium... Does this mean I will never be able to update my tab?
I tried LUX (which is a neighbouring country and the code that came with the device) and PHN (which uses the same language and is also a neighbouring country) but when connected to KIES both refused to update
its mean you have to flash your firmware or ask from anyone to give you the CSC files that has your country that in case you are rooted and have CWM i doubt you don't have
so
in second chance follow my guide to flash your stock firmware http://forum.xda-developers.com/showthread.php?t=1133590
u must download your firmware , from samfirmware.com but before download any one , check if it has your country or no , by this link http://www.samfirmware.com/samfit.htm
start to copy the firmware code from each firmware up there and see if its for your country or no ....
is that so hard ?
Did you buy the tab from a carrier? This configuration looks like it was made by a carrier or a specialised business. Is it a work tab i.e you got it from work.
In your country the out of the box new tabs should be PDA: JMG Phone: JMF CSC: JMG
DarkPal said:
Did you buy the tab from a carrier? This configuration looks like it was made by a carrier or a specialised business. Is it a work tab i.e you got it from work.
In your country the out of the box new tabs should be PDA: JMG Phone: JMF CSC: JMG
Click to expand...
Click to collapse
now he is yours , you are the pro with kies update
lol, I used up all my Google-fu and searched everything I could think of.
Anyway, I know how to root and flash custom firmwares -- I've done it with another Samsung -- but I just wanted to do this one the "official" easy way. But it looks like KIES won't play nice
To answer your question, I won the tab so I didn't buy it from a carrier nor was it SIM-locked. I'll see if I can find a JMG/JMF/JMG .zip somewhere and report back later -- thanks
cannot update out of box
even i purchased a galaxy tab from dubai but when i connected to kies it said my version of device could not be updated. but then i followed this link http://forum.xda-developers.com/showthread.php?p=13682956&mode=linear#post13682956 to install gingerbread and now everything is working fine, market and everything else works fine but the pda field and csc field shows empty when i dial *#1234# .
Both of you have to flash a stock rom and repartition.
But if you have to do that, why not just flash stock gingerbread?
rangercaptain said:
Both of you have to flash a stock rom and repartition.
But if you have to do that, why not just flash stock gingerbread?
Click to expand...
Click to collapse
man such a pain just to use a application thats SUPPOSED to work OOB.
glad i never needed to use kies
wolfie083188 said:
man such a pain just to use a application thats SUPPOSED to work OOB.
glad i never needed to use kies
Click to expand...
Click to collapse
It's the exact same work to upgrade using kies as it is to flash a custom (or stock) rom using odin3 1.7 (or heimdal).
So in what way is it a pain?
u mean to say if i flash my tab with a stock rom then it can be later updated using kies when further updates are available.
rangercaptain said:
Both of you have to flash a stock rom and repartition.
But if you have to do that, why not just flash stock gingerbread?
Click to expand...
Click to collapse
I agree -- it's just that I was curious as to why this would happen with an out-of-box stock device.
I know how to use Odin (that is, I know how to follow a tutorial ), I've used it before to flash an Eclair to Froyo, but I'm not sure which ROM to use. I'm on samfirmware.com and downloaded P1000XXJMQ (2.3.3) -- is this the one I should use?
To be honest, I don't even know which samfirmware.com ROM I would need to revert to my current firmware version (PDA:JMG / PHONE:JMA / CSC:JM6)... I think it's either P1000XXJM6 (because of the CSC:JM6) or P1000XWJMG (because of the PDA:JMG)... It's confusing me
So I have 2 questions:
Is P1000XXJMQ a stock Gingerbread?
What ROM do I need in case I want to downgrade to my current firmware? P1000XXJM6 or P1000XWJMG or another one? Edit: I did *#1234# and assume it's P1000XWJMG.
By the way, CSC = Country Sales Code? (just a guess)
Edit: I'm going to flash P1000XXJMQ, I hope I don't brick it, wish me luck I'm a nervous wreck, I drank way too much coffee this morning
Edit 2: the one that samfirmware.com says is JMQ is actually JQ1... still looking for JMQ because I think that's a newer version
Okay, here's an update on what I've done so far and on the outcome...
The link for P1000XXJMQ on SamFirmware was actually P1000XXJQ1 so I went with that one.
According to SamFIT it's for the following regions: Austria, Benelux, France, Germany, Hungary, Italy, Spain; which includes Belgium.
I ran Odin3 v1.7 with Re-Partition, Auto Reboot and F. Reset Time; I used PIT file gt-p1000_mr.pit and PDA file P1000XXJQ1_P1000XXJQ1_P1000XXJPZ_HOME.tar; etc.
Long story short, I'm running Gingerbread but still no sales code for Belgium when I *#272*IMEI#... so KIES keeps refusing to update. It doesn't really matter now because I'm running the latest but I'd like to fix this for future updates.
I searched a lot but I must be doing something wrong. Can anyone give me some advice?
sarduwie said:
Okay, here's an update on what I've done so far and on the outcome...
The link for P1000XXJMQ on SamFirmware was actually P1000XXJQ1 so I went with that one.
According to SamFIT it's for the following regions: Austria, Benelux, France, Germany, Hungary, Italy, Spain; which includes Belgium.
I ran Odin3 v1.7 with Re-Partition, Auto Reboot and F. Reset Time; I used PIT file gt-p1000_mr.pit and PDA file P1000XXJQ1_P1000XXJQ1_P1000XXJPZ_HOME.tar; etc.
Long story short, I'm running Gingerbread but still no sales code for Belgium when I *#272*IMEI#... so KIES keeps refusing to update. It doesn't really matter now because I'm running the latest but I'd like to fix this for future updates.
I searched a lot but I must be doing something wrong. Can anyone give me some advice?
Click to expand...
Click to collapse
What message does kies state? Is it "latest firmware" or "cannot be updated"?
If it says "latest" then no update yet is available. If "cannot update" then your CSC does not match any firmware combination with samsung...
If you read samfirmware FAQ they have stated that the firmware they post is not official so they don't actually say that samsung recognizes them.
bongski55 said:
What message does kies state? Is it "latest firmware" or "cannot be updated"?
If it says "latest" then no update yet is available. If "cannot update" then your CSC does not match any firmware combination with samsung...
If you read samfirmware FAQ they have stated that the firmware they post is not official so they don't actually say that samsung recognizes them.
Click to expand...
Click to collapse
So far it's always been "cannot be updated". I knew it was a CSC problem, I just don't know where to get the right firmware. That's why I asked if P1000XXJMQ is a stock Gingerbread. I'm going to try and find a stock fw and flash it.
Edit: is this the right one: [stock rom][2.3.3] p1000xxjq1 p1000xxjq1 p1000xxjpz ?
JQ1 is stock for Italy
k0sh said:
*#272*IMEI# choose your country CODE and press install , this is will wipe everything in your tab .... then check the kies after that
Click to expand...
Click to collapse
This worked fine for me. Thx
I am thick as ....so please help.
My UK SGT is:
PDA; P1000xxjq1
Phone: P1000xxjpz
CSC: P1000oxajq1
Brought from CPW -
When I connect to Kies it shows 'this device cannot be updated'
Please in plain, simple, english what do I need to do to rectify this and be able to update through Kies?
I have tried connnecting to Odin 1.7 which is com8 and yellow.
My thought is to go back to stock and leave the hell alone! Unless you advise me otherwise.
Many thanks as always
EDIT: Oh what fun we had......Now I have completely ....... I have flashed JMK stock safe that I saved when I first upgraded to 2.3.3, now I have
PDA: P1000XWJMK
PHONE: P1000XXJPZ
CSC: P1000PHNJM5
As I said I am stupid so please save me before I break it?
X
Edit 2: Ok back to Version 1>
PDA; P1000xxjq1
Phone: P1000xxjpz
CSC: P1000oxajq1
what a waste of a few hours, still no stock.....
Edit 3: Got Kies to recognise and update the SGT yeah!
Damn it, now I still have 2.2
PDA: P1000WJMK
PHONE: P1000XXJMA
CSC: P1000PHNJM5
WTF is going on, can someone PLEASE lend me a hand?