[Q] Phone shows no PDA and no CSC - Galaxy S I9000 Q&A, Help & Troubleshooting

When I type *#1234# to check out what pda/phone/csc version i got, it comes up as this:
PDA :
PHONE: I9000XXMJ4
CSC :
I flashed to JM8 to update through Kies again, but Ive tried other roms aswell, with same result.
Tried the manual part from here but without any luck, my phone said "MUST BE THREE LETTERS!" or something, it showed at top "XEE" and below was just a empty spot, with a dot to the right i could click on, but that didnt helt neither, and neither did it to press the XEE.
Ive tried Kies-registryhack to update the phone, without any luck.
With using *#*#44336#*#* i get:
INTERNAL VERSION
VERSION:
PDA: I9000XWJM8
PHONE:I9000XXJM4
CSC: Unknown
Build time 2010.08.31. (weird sign) 09:45:32 kst
Changelist: Unknown
With using *#*#4986*2650468#*#* i get :
PDA : I9000XWJM8
approved PDA :
Phone: I9000XXJM4
H/W : MP 0.800
RFCallDate: 2010.6.14
CSC : Unknown
approved CSC: Unknown
Anyone know how to fix this issue with PDA and CSC? and also make it update through kies?
Edit: I figured out that I didnt try with the kies registry patcher program yet, did that and it worked flawless, phone now says JPA, wich is latest one in sweden, and csc is recognized aswell. Problem solved!

Related

[Q] USB Connection problems after flashing!!

I was having problems restoring somethings I accidentally uninstalled using titanium!! I thought that using odin3 to reset is would work but no all the things I had previously uninstalled were still not there! I decided just to re-flash the firmware myself. I downloaded what I think is the official JF3 firmware and also the JM1 firmware. The only thing with the JF3 firmware is that I cannot find the original CSC (XENJF3) for it! I just used on of the unbranded european csc firmwares! As things go the firmwares flashed without a problem... Also my first time even trying! But I now have a problem no matter what firmware is on there I cannot seem to connect to kies or a number of things through the USB..... All that happens when I connect my USB now is the Samsung Kies screen comes on for a couple of seconds and then starts flashing on and off.... only stops when the USB cable is pulled! Have I done something wrong! Could someone please help!!!
Originally on the phone:
CODE: XXJF3
MODEM: XXJF3
CSC: XENJF3
1st tried flash:
CODE: I9000XXJF3_REV03_LOW.tar
MODEM: I9000XXJF3.tar
CSC: I9000OXAJF3.tar
2nd attempt:
CODE: I9000XWJM1.tar
MODEM: I9000XXJG6.tar
CSC: I9000OXXJG7.tar
Any help would be most appreciated!!
Edit: Solved it simply my formatting the internal sd card!!

[Q] Can I recover baseband (phone) version on galaxy I 9000

Hi all,
Me and myfriend have the same galaxy s, and we did next...
We wanted to enable 3 button combo, and DID NOT READ ENOUGHT so:
A month ago, on my phone we changed registry of kies, so kies thought we are in Canada, and sucesfuly updated frimware trough kies.
Than we realized that I have Canadian Bell frimware, which is not fuly suported in our country, and tried to rollback frimware.
In midtime, I tried *#272*hhmm#, and used option BMC, whitch preconfigured my phone, like I bough it in Bell. WTF, i had bell app on my phone...
Than pain started.
I was playing with odin.. Tried several frimwares, had some serious issues with signal reception ( in area with 2/3 of signal strenght, had no signal), market did not work, or did not wont to download anything..
******
Bricked phone several times
******
Whic by the way, proved me, that this phone is fabolous, because it is sofware indestractuble... (ONLY THING TO WATCH OUT ---- FULL BATERY, AND ENABLED 3 BUTTONS COMBO---)
And after few days of resarching, used ROMmanager, backuped friends Galaxy S, put in my phone, used backup, and evrything works fine.
EXCEPT
PHONE: I9000XXJM1
I have on my phone PHONE: I9000XXJG1
Does have enybody an idea, where to take I9000XXJM1, from friends I9000, where on his phone could it be found?
The problem is, that baseband version and PDA/CSC do not match, and kies regpatch does not anymore work.
On my phone, I have:
PDA: I9000XFJM3
PHONE: I9000XXJG1
CSC: I9000OXFJM1
and I should have:
PDA: I9000XFJM3
PHONE: I9000XXJM1
CSC: I9000OXFJM1
P.S. I used again *#272*hhmm# set the sealer code VIP, sealers code is fixed, but baseband version is still unchanged.
http://www.samfirmware.com/WEBPROTECT-i9000.htm
You will have to register if you have not done yet, but you can find the firmware your search for there.
Also, you didnt "brick" your phone. Bricked means its broken, wont turn on, wont allow to be flashed and is a paperweight and needs some kind of hardware replacement. I would use the term screwed up the phone, or hooped it, or f'd it up But bricked is the incorrect term
Cheers!
Tnx for the try, but i need
PDA: I9000XFJM3
PHONE: I9000XXJM1
CSC: I9000OXFJM1
I looked there and there is no I9000XFJM3...
My question was, if u have on your phone
PDA: I9000XFJM3
PHONE: I9000XXJM1
CSC: I9000OXFJM1
can u take PHONE: I9000XXJM1, and put it on another device, I managed to do it with PDA and CSC..

[Q] HELP! radio down after flashing firmware

Hi,
I'm newbie with SGS, I tried to flash an official italian firmware 2.2.1 with Odin and 3 files. Everything appears ok, but now the phone module don't starts. On notification bar only a no-entry sign. Wifi works fine.
With *#1234# shows:
PDA: I9000RSJS2
PHONE: UNKNOWN
CSC: I9000ITVJS1
BUILD INFO: 2011.01
With *2767*4387264636# shows:
service mode... nothing.
Originally, the product code was from a portuguese device, the firmware a 2.1-update1 release.
Any chance to recover the situation? The phone enters in download & recovery mode...
Have you checked to see whether your APN settings are correct?
Inverno said:
Hi,
I'm newbie with SGS, I tried to flash an official italian firmware 2.2.1 with Odin and 3 files. Everything appears ok, but now the phone module don't starts. On notification bar only a no-entry sign. Wifi works fine.
With *#1234# shows:
PDA: I9000RSJS2
PHONE: UNKNOWN
CSC: I9000ITVJS1
BUILD INFO: 2011.01
With *2767*4387264636# shows:
service mode... nothing.
Originally, the product code was from a portuguese device, the firmware a 2.1-update1 release.
Any chance to recover the situation? The phone enters in download & recovery mode...
Click to expand...
Click to collapse
Phone should be I9000XXJPY, like all european 2.2.1 ROMS
Try to flash the modem only, check in ODIN that it lists modem.bin as being copied to the device.
Yes, I've tried to reflash a h3g rom (I have a h3g sim).
And it is not an apn problem, I can't access the phone signal at all, I get only a no-entry simbol on tray notification and can't make calls. Now it's getting to be a bit worried...
vcespon said:
Phone should be I9000XXJPY, like all european 2.2.1 ROMS
Try to flash the modem only, check in ODIN that it lists modem.bin as being copied to the device.
Click to expand...
Click to collapse
Hi,
originally I think to remember something like WTY, or WTI... in the box there are 2 manuals, 1 in english and 1 in portuguese... that's why I thought it could by portuguese firmware. The one I fashed was JPY, like you said.
The roms I downloaded in the package contains a modem file in this format: MODEM_I9000XXJPY.tar.md5. Not .bin. Can I flash it alone, with no pit file and "re-partition" option disabled? That's correct?
Thanks to all for your attention.
Another try, I flashed a JP1 radio from recovery, the process has gone well, but the phone still seems to not recognize radio. After *#1234#:
PDA: I9000RSJS2
PHONE: UNKNOWN
CSC: I9000ITVJS1
BUILD INFO: 2011.01
The telephone does not show the IMEI with *#06#... nothing.
Have to send it to assistance?

[Q] Revert back to Stock to connect and update with Kies?

I am thick as ....so please help.
My UK SGT is:
PDA; P1000xxjq1
Phone: P1000xxjpz
CSC: P1000oxajq1
Brought from CPW -
When I connect to Kies it shows 'this device cannot be updated'
Please in plain, simple, english what do I need to do to rectify this and be able to update through Kies?
I have tried connnecting to Odin 1.7 which is com8 and yellow.
My thought is to go back to stock and leave the hell alone! Unless you advise me otherwise.
Many thanks as always
EDIT: Oh what fun we had......Now I have completely ....... I have flashed JMK stock safe that I saved when I first upgraded to 2.3.3, now I have
PDA: P1000XWJMK
PHONE: P1000XXJPZ
CSC: P1000PHNJM5
As I said I am stupid so please save me before I break it?
X
Edit 2: Ok back to Version 1>
PDA; P1000xxjq1
Phone: P1000xxjpz
CSC: P1000oxajq1
what a waste of a few hours, still no stock.....
Edit 3: Got Kies to recognise and update the SGT yeah!
Damn it, now I still have 2.2
PDA: P1000WJMK
PHONE: P1000XXJMA
CSC: P1000PHNJM5
WTF is going on, can someone PLEASE lend me a hand?
Two things here:
1. Your sales code should match the PDA/PHONE/CSC for kies to 'see' ifcthere is an update.
2. As of this writing there is no gingerbread update for the UK.
Sent from my GT-P1000 using Tapatalk
I think you have an Asian stock firmware there. PHN is Philippines, I think. So Kies thinks you have a Philippines SGT.
I flashed JJ4 from samfirmware.com, which is a Russian firmware.
I think, from what I've read, that stock Gingerbread is available in UK (sorry to contradict Bongski). Unfortunately I didn't save my firmware before flashing away from stock, so I'm in the same boat as you - no Kies updates.
What you need is someone to provide an official CPW firmware, I think, which you would flash with Odin and then Kies should update you. I tried using SpoofFW from the market, but Kies only got to 25% before failing, then I had to go back to Odin and the JJ4 firmware.
If you're comfortable with Odin, you might want to try that?
If you do get the CPW firmware, please let me know...!
@treb1971
CSC PHN doesn't stand for Philippines. Philippine CSC's are as the following:
GLB - Philippines;Globe
SMA - Philippines;Smart
XTC - Philippines;Multiple
XTE - Philippines;SUN
My bad - apologies...
If you do get the CPW firmware, please let me know...!
Anyone got this and can help?
'I tried using SpoofFW from the market, but Kies only got to 25% before failing, then I had to go back to Odin and the JJ4 firmware.'
I have read 45 pages of SpoofFW and its way over my head!
Thanks in advance

[Q] Reset to Swedish FW so Kies recognize it?

Hi.
I'm trying to reset my friend's phone so that Samsung Kies can recognize the right region so he can update it himself when ICS is released in Sweden easily with Kies.
I've done that many many times on my SGS but now it doesn't work on his Note
I've downloaded the "right" file from sammobile.com (official fw)
(GT-N7000 - Nordic countries
PDA: N7000XBKK4
CSC: N7000OXXKK5
Version: 2.3.6
Date: 2011-11-01
Regions: Denmark, Norway, Sweden)
The name of the file before I unzip is "N7000XBKK4_N7000OXXKK5_NEE" and it's only one file .tar.md5 to put in Odin after unzip. When I start Samsung Kies it says that it's (KOR) and not (NEE) as it should be, and that I can't update this device.
Anyone have any tips?
And another thing, it didn't do a factory reset by it self so I did if in Recovery!?!
Love //Ante
please someone??
dial *#272"IMEI"# without the quotes, then change the CSC to NEE or whatever region you are in. WARNING: This will perform a factory reset, all data will be lost
to get your IMEI dial *#06#
rcaballero said:
dial *#272"IMEI"# without the quotes, then change the CSC to NEE or whatever region you are in. WARNING: This will perform a factory reset, all data will be lost
to get your IMEI dial *#06#
Click to expand...
Click to collapse
Thanks, will try, but I just read that it works on froyo, this is gingerbread.
Will try anyway =)
Have a nice day
didn't work, so i guess its just for Froyo
any other ideas?
I'm sorry it should have been *#272*IMEI#
my bad

Categories

Resources