[Q] USB Connection problems after flashing!! - Galaxy S I9000 Q&A, Help & Troubleshooting

I was having problems restoring somethings I accidentally uninstalled using titanium!! I thought that using odin3 to reset is would work but no all the things I had previously uninstalled were still not there! I decided just to re-flash the firmware myself. I downloaded what I think is the official JF3 firmware and also the JM1 firmware. The only thing with the JF3 firmware is that I cannot find the original CSC (XENJF3) for it! I just used on of the unbranded european csc firmwares! As things go the firmwares flashed without a problem... Also my first time even trying! But I now have a problem no matter what firmware is on there I cannot seem to connect to kies or a number of things through the USB..... All that happens when I connect my USB now is the Samsung Kies screen comes on for a couple of seconds and then starts flashing on and off.... only stops when the USB cable is pulled! Have I done something wrong! Could someone please help!!!
Originally on the phone:
CODE: XXJF3
MODEM: XXJF3
CSC: XENJF3
1st tried flash:
CODE: I9000XXJF3_REV03_LOW.tar
MODEM: I9000XXJF3.tar
CSC: I9000OXAJF3.tar
2nd attempt:
CODE: I9000XWJM1.tar
MODEM: I9000XXJG6.tar
CSC: I9000OXXJG7.tar
Any help would be most appreciated!!
Edit: Solved it simply my formatting the internal sd card!!

Related

[Q] Can I recover baseband (phone) version on galaxy I 9000

Hi all,
Me and myfriend have the same galaxy s, and we did next...
We wanted to enable 3 button combo, and DID NOT READ ENOUGHT so:
A month ago, on my phone we changed registry of kies, so kies thought we are in Canada, and sucesfuly updated frimware trough kies.
Than we realized that I have Canadian Bell frimware, which is not fuly suported in our country, and tried to rollback frimware.
In midtime, I tried *#272*hhmm#, and used option BMC, whitch preconfigured my phone, like I bough it in Bell. WTF, i had bell app on my phone...
Than pain started.
I was playing with odin.. Tried several frimwares, had some serious issues with signal reception ( in area with 2/3 of signal strenght, had no signal), market did not work, or did not wont to download anything..
******
Bricked phone several times
******
Whic by the way, proved me, that this phone is fabolous, because it is sofware indestractuble... (ONLY THING TO WATCH OUT ---- FULL BATERY, AND ENABLED 3 BUTTONS COMBO---)
And after few days of resarching, used ROMmanager, backuped friends Galaxy S, put in my phone, used backup, and evrything works fine.
EXCEPT
PHONE: I9000XXJM1
I have on my phone PHONE: I9000XXJG1
Does have enybody an idea, where to take I9000XXJM1, from friends I9000, where on his phone could it be found?
The problem is, that baseband version and PDA/CSC do not match, and kies regpatch does not anymore work.
On my phone, I have:
PDA: I9000XFJM3
PHONE: I9000XXJG1
CSC: I9000OXFJM1
and I should have:
PDA: I9000XFJM3
PHONE: I9000XXJM1
CSC: I9000OXFJM1
P.S. I used again *#272*hhmm# set the sealer code VIP, sealers code is fixed, but baseband version is still unchanged.
http://www.samfirmware.com/WEBPROTECT-i9000.htm
You will have to register if you have not done yet, but you can find the firmware your search for there.
Also, you didnt "brick" your phone. Bricked means its broken, wont turn on, wont allow to be flashed and is a paperweight and needs some kind of hardware replacement. I would use the term screwed up the phone, or hooped it, or f'd it up But bricked is the incorrect term
Cheers!
Tnx for the try, but i need
PDA: I9000XFJM3
PHONE: I9000XXJM1
CSC: I9000OXFJM1
I looked there and there is no I9000XFJM3...
My question was, if u have on your phone
PDA: I9000XFJM3
PHONE: I9000XXJM1
CSC: I9000OXFJM1
can u take PHONE: I9000XXJM1, and put it on another device, I managed to do it with PDA and CSC..

[Q]Help with Kies updates...

Hello, I was wondering if someone could help me. I wanted to update to Froyo, and try using the kies registry patcher, but I just changed my phones location, because i didnt get Froyo. But then I flashed to my phone a past europe firmware using Odin. And tried to upgrade using kies and kies registry patcher to return to my factory data. The problem is that I can't upgrade with Kies as it says my phone can`t be updated but it has an update.
Now on my phone I have the following:
GT-9000
PDA: I9000XXJF1
PHONE: I9000XXJF1
CSC: I9000OXAJF1
And I want to get:
GT-9000T
PDA: I9000TUBJH4
PHONE: I9000TUBJH1
CSC: I9000TUBJH4
Many thanks in advance,
kies registry patcher
Be better asking in the actual posts of that app .
jje

[Q] HELP! radio down after flashing firmware

Hi,
I'm newbie with SGS, I tried to flash an official italian firmware 2.2.1 with Odin and 3 files. Everything appears ok, but now the phone module don't starts. On notification bar only a no-entry sign. Wifi works fine.
With *#1234# shows:
PDA: I9000RSJS2
PHONE: UNKNOWN
CSC: I9000ITVJS1
BUILD INFO: 2011.01
With *2767*4387264636# shows:
service mode... nothing.
Originally, the product code was from a portuguese device, the firmware a 2.1-update1 release.
Any chance to recover the situation? The phone enters in download & recovery mode...
Have you checked to see whether your APN settings are correct?
Inverno said:
Hi,
I'm newbie with SGS, I tried to flash an official italian firmware 2.2.1 with Odin and 3 files. Everything appears ok, but now the phone module don't starts. On notification bar only a no-entry sign. Wifi works fine.
With *#1234# shows:
PDA: I9000RSJS2
PHONE: UNKNOWN
CSC: I9000ITVJS1
BUILD INFO: 2011.01
With *2767*4387264636# shows:
service mode... nothing.
Originally, the product code was from a portuguese device, the firmware a 2.1-update1 release.
Any chance to recover the situation? The phone enters in download & recovery mode...
Click to expand...
Click to collapse
Phone should be I9000XXJPY, like all european 2.2.1 ROMS
Try to flash the modem only, check in ODIN that it lists modem.bin as being copied to the device.
Yes, I've tried to reflash a h3g rom (I have a h3g sim).
And it is not an apn problem, I can't access the phone signal at all, I get only a no-entry simbol on tray notification and can't make calls. Now it's getting to be a bit worried...
vcespon said:
Phone should be I9000XXJPY, like all european 2.2.1 ROMS
Try to flash the modem only, check in ODIN that it lists modem.bin as being copied to the device.
Click to expand...
Click to collapse
Hi,
originally I think to remember something like WTY, or WTI... in the box there are 2 manuals, 1 in english and 1 in portuguese... that's why I thought it could by portuguese firmware. The one I fashed was JPY, like you said.
The roms I downloaded in the package contains a modem file in this format: MODEM_I9000XXJPY.tar.md5. Not .bin. Can I flash it alone, with no pit file and "re-partition" option disabled? That's correct?
Thanks to all for your attention.
Another try, I flashed a JP1 radio from recovery, the process has gone well, but the phone still seems to not recognize radio. After *#1234#:
PDA: I9000RSJS2
PHONE: UNKNOWN
CSC: I9000ITVJS1
BUILD INFO: 2011.01
The telephone does not show the IMEI with *#06#... nothing.
Have to send it to assistance?

[Q] Revert back to Stock to connect and update with Kies?

I am thick as ....so please help.
My UK SGT is:
PDA; P1000xxjq1
Phone: P1000xxjpz
CSC: P1000oxajq1
Brought from CPW -
When I connect to Kies it shows 'this device cannot be updated'
Please in plain, simple, english what do I need to do to rectify this and be able to update through Kies?
I have tried connnecting to Odin 1.7 which is com8 and yellow.
My thought is to go back to stock and leave the hell alone! Unless you advise me otherwise.
Many thanks as always
EDIT: Oh what fun we had......Now I have completely ....... I have flashed JMK stock safe that I saved when I first upgraded to 2.3.3, now I have
PDA: P1000XWJMK
PHONE: P1000XXJPZ
CSC: P1000PHNJM5
As I said I am stupid so please save me before I break it?
X
Edit 2: Ok back to Version 1>
PDA; P1000xxjq1
Phone: P1000xxjpz
CSC: P1000oxajq1
what a waste of a few hours, still no stock.....
Edit 3: Got Kies to recognise and update the SGT yeah!
Damn it, now I still have 2.2
PDA: P1000WJMK
PHONE: P1000XXJMA
CSC: P1000PHNJM5
WTF is going on, can someone PLEASE lend me a hand?
Two things here:
1. Your sales code should match the PDA/PHONE/CSC for kies to 'see' ifcthere is an update.
2. As of this writing there is no gingerbread update for the UK.
Sent from my GT-P1000 using Tapatalk
I think you have an Asian stock firmware there. PHN is Philippines, I think. So Kies thinks you have a Philippines SGT.
I flashed JJ4 from samfirmware.com, which is a Russian firmware.
I think, from what I've read, that stock Gingerbread is available in UK (sorry to contradict Bongski). Unfortunately I didn't save my firmware before flashing away from stock, so I'm in the same boat as you - no Kies updates.
What you need is someone to provide an official CPW firmware, I think, which you would flash with Odin and then Kies should update you. I tried using SpoofFW from the market, but Kies only got to 25% before failing, then I had to go back to Odin and the JJ4 firmware.
If you're comfortable with Odin, you might want to try that?
If you do get the CPW firmware, please let me know...!
@treb1971
CSC PHN doesn't stand for Philippines. Philippine CSC's are as the following:
GLB - Philippines;Globe
SMA - Philippines;Smart
XTC - Philippines;Multiple
XTE - Philippines;SUN
My bad - apologies...
If you do get the CPW firmware, please let me know...!
Anyone got this and can help?
'I tried using SpoofFW from the market, but Kies only got to 25% before failing, then I had to go back to Odin and the JJ4 firmware.'
I have read 45 pages of SpoofFW and its way over my head!
Thanks in advance

Unable to upgrade firmware via Kies after flashing to stock rom

Hi,
I flashed my SGS to CM7 and don't really like it. I have downloaded the firmware ( I9000DXJF4 )from sammobile and flashed it. However, I am unable to upgrade the firmware using Kies to the new firmware available thru Samsung.
My current version is as followed
PDA: I9000DXJF4
PHONE: I9000DXJF4
CSC: I9000OLBJF4
From the look of my phone, everything seem to be back to its original setting, with all the singtel (my telco provider ) apps. Now I am trying to upgrade to Froyo 2.2 (I think) using Kies. Kies prompted that it is unable to update the firmware. I tried the latest version of kies and also version 1.5. Both are unable to do so.
Anyone can kindly advise?
Try changing your CSC code to XEU. I encountered some issues with KIES updates when having CSC code KOR.
Hi,
I tried to change to XUE but this option is not available. I go into CSC by *#272*HHMM#. Is it wrong?
*#272*???????????????# (??????????????? it's your IMEI, it must have 15 digits)
or try https://market.android.com/details?id=com.nfye.insanity.toolbox
Hi,
Thanks for your help. I got my IMEI code. It pop up in a small window. Then I tried to change the CSC using the method u mentioned. But nothing happen. When I press the call button, it say "USSD code running..." then follow by "UNKNOWN APPLICATION"
I also tried to install the software, but it is only for android 2.2 and above. I tried to find the crack version for the premium version but cant find any. Do you have the premium version? Can upload to mediafire and send me the link?
Never try to install via KIES ..
Install via ODIN the Firmware you want it's simply better, even if ODIN is unofficial.
Introductions you will find by googleing I think .. it's easy.
Good luck and have fun
Hi,
Ya, using Odin now. But still prefer Kies over Odin. A lot of stuff become automatic with Kies.
I just flash to DXJG4 hoping to be able to link to kies but it failed.
I read that once the lagfix is fixed, there will be problem with kies. Am I fixing the lagfix in anyway thus leading to this problem?
Did you get solution to your problem? I had the same problem with a Galaxy Wonder... when i tried to upgrade via kies i got this screen..
That I cannot post actually because the forum prevents me from doing it...
BUT...
I tried OTA upgrade with perfect results... And the funny thing is that I NEVER before could start OTA...
BTW everything's fine now and I bumped to 2.3.6 ggbrd
nuky8181 said:
Hi,
I flashed my SGS to CM7 and don't really like it. I have downloaded the firmware ( I9000DXJF4 )from sammobile and flashed it. However, I am unable to upgrade the firmware using Kies to the new firmware available thru Samsung.
My current version is as followed
PDA: I9000DXJF4
PHONE: I9000DXJF4
CSC: I9000OLBJF4
From the look of my phone, everything seem to be back to its original setting, with all the singtel (my telco provider ) apps. Now I am trying to upgrade to Froyo 2.2 (I think) using Kies. Kies prompted that it is unable to update the firmware. I tried the latest version of kies and also version 1.5. Both are unable to do so.
Anyone can kindly advise?
Click to expand...
Click to collapse
You can download all the recent firmware from sammobile and you can flash it via odin. Flashing stock ROM via Odin

Categories

Resources