[Q]Help with Kies updates... - Galaxy S I9000 Q&A, Help & Troubleshooting

Hello, I was wondering if someone could help me. I wanted to update to Froyo, and try using the kies registry patcher, but I just changed my phones location, because i didnt get Froyo. But then I flashed to my phone a past europe firmware using Odin. And tried to upgrade using kies and kies registry patcher to return to my factory data. The problem is that I can't upgrade with Kies as it says my phone can`t be updated but it has an update.
Now on my phone I have the following:
GT-9000
PDA: I9000XXJF1
PHONE: I9000XXJF1
CSC: I9000OXAJF1
And I want to get:
GT-9000T
PDA: I9000TUBJH4
PHONE: I9000TUBJH1
CSC: I9000TUBJH4
Many thanks in advance,

kies registry patcher
Be better asking in the actual posts of that app .
jje

Related

[Q] Need i9000T 2.2.1 Firmware i9000TUBJP9

I bought 2 unlocked i9000T's . I've kept one with 2.1 and have been waiting for the official 2.2.1 release via KIES which is now available.
My other unit was updated to 2.2.1 with the Registry Hack. What's the best way to get my Hacked i9000T back to factory so it can take updates as they roll out?
I've looked for the i9000TUBJP9 firmware to load via ODIN but no luck. I use ODIN on my TAB.
Any help would be great.
The i9000T is the latin america version.
thanks
The latin american version is the i9000b
You can get 2.2.1 by either flashing it directly with odin or flashing back to an older stock and then updating with kies
Sent from my GT-I9000 using Tapatalk
GT-I9000T need stock firmware
I have 2 of these phones. Part # GT-I9000T . One has been updated to 2.2.1 via KIES to I9000TUBJP9.The other phone was Flashed with Euro 2.2.1 rom. What's the best way to get the I9000T back to stock. I can't locate the I9000T firmware on Samfirmware.
Just need the download link and will use ODIN
thanks
3dadd said:
I have 2 of these phones. Part # GT-I9000T . One has been updated to 2.2.1 via KIES to I9000TUBJP9.The other phone was Flashed with Euro 2.2.1 rom. What's the best way to get the I9000T back to stock. I can't locate the I9000T firmware on Samfirmware.
Just need the download link and will use ODIN
thanks
Click to expand...
Click to collapse
You should be able to go back using kies 1.5 and kies patcher. Then you would go to Kies 2 to get the latest update. If this doesnt work for you I have an old eclair that I think should work with this phone, you can use that as a base to jump to the latest version.
btw could you please post the modem that came with the update? It´s easy, on the phone you already update you download Terminal emulator then in the program enter:
Code:
dd if=/dev/block/bml12 of=/sdcard/bml12
This will copy the modem to the sdcard. Á lot of people will apreciate it! let us know how it goes.
I downloaded terminal emulator on the 2.2.1 i9000TUBJP9 phone and the command gives me an error:
cannot open for read: no such file or directory.
Does it require root? Since this is a new & stock phone was not planning to root it. I will root my 2.1 once I get it upgraded to JP9
The 2.1 Eclair version I'm running again is.
Baseband:
I9000TUBJH1
If you have a different i9000T firmware to try with ODIN that would be great. The older version of Kies 1.5 patcher did not work. I tried all if the i9000TUB settings CWW, PCW, TTT, and several more.
Once I get this phone to the version as my stock 2.2.1 I'll root it and get the modem file - no problem.
Are you sure you typed it correctly? I was under the impression it did NOT require root. I´ve done it on mine but Im rooted. Special attention to bml12, thats B-M-L-1-2 (just in case)
I dont have the rom around in this machine but luckily I saved the download link
I900T
I think this is exactly what you´re looking for.
If possible when you are upgrading the phone via kies you can try to save the entire rom. There are instructions in the kies patcher thread in the first post on how to do it. But the modem at least would be great.
Good luck.
Any luck?
Sent from my GT-I9000 using XDA App
Thanks for the link, but that's the same file I have here and loaded on the phone. KIES 1.5 won't update it. It's been Pretty frustrating. I'm not sure what KIES is looking for.
You need kies 2. Install the latest version. Kies looks at your product code and current firmware version. Make sure toi change your csc region to TTT also just in case.
To change your csc in 2.1 enter *#272*hhmm# where hh and mm is current time of phone. Change to TTT. Beware this will reset your phone.
If you need more help let me know.
Sent from my GT-I9000 using XDA App
If all else fails you can try spooffw, you can find it in the forums. But you can try what i posted above first. To add to that nake sure kies is reporting your product code to be TTT.
Good luck.
Sent from my GT-I9000 using XDA App
No luck yet.
Changed product code to TTT using the *#272*HHMM# method.
Using KIES 2.0.0.11033_25 and no luck
Tried the 1.8 patcher and set to TTT which spoofs PDA:JG5/ PHONE:JG7/CSC:JG4 (TTT)
Is there anything on the phone to reset. I tried factory reset under the Security option.
What product code does kies say you have? The code i gave does not change the hw product code, just CSC region code.
Patcher 1.8 wont help you, disable it.
Sent from my GT-I9000 using XDA App
If this isnt working i think you have a 2 options. 1. Try spooffw or 2. Root both phones. Backup efs folder of the 2.1 phone. Make nandroid backups of both phones. Then restore nandroid backup from your updated phone to the other. I believe this would work.
Sent from my GT-I9000 using XDA App
Tried my best. Good luck man.
Sent from my GT-I9000 using XDA App
I have done the Spooffw which works great for all other firmware than TTT. There are no i9000T codes on it.
The Spooffw is a very cool and easy way to do this - just need the i9000T codes.
3dadd said:
I have done the Spooffw which works great for all other firmware than TTT. There are no i9000T codes on it.
The Spooffw is a very cool and easy way to do this - just need the i9000T codes.
Click to expand...
Click to collapse
Product Code: GT-I9000HKTTTT
PDA: I9000TUBJG5
PHONE: I9000TUBJG7
CSC: I9000TUBJG4
I'll work on it today again. No problem getting the phone to Euro firmware XEU. KIES updates it no problem. Tested it on several different compters and KIES was no problem. The SPOOFFW method does work. It would be great to have him add the I9000HKTTTT.
Here's the codes I tried to enter inthe SPOOFFW manually:
Product code GT-I9000HKTTTT
PDA: I9000TUBJG5
PHONE: I9000TUBJG7
CSC: I9000TUUBJG4
The SPOOFFW will accept the info , but KIES never connects to update - The phone won't connect as it should. If you leave it on long enough, it will connect with no firmware info.
This made me think that SPOOFFW had additional data in it's preset info.
I'll keep trying for the I9000T TTT
After you spoof check that everything is set with *#1234#
Sent from my GT-I9000 using XDA App
Yes I checked with *#1234# and it checks out.
It's more an issue of connecting to KIES after it changes the Productcode to HKTTTT.
Here's my steps:
Check Productcode is:
I9000HKTTT
Manually enter:
PDA: I9000TUBJG5
Press OK
Reboot
Manually enter :
PHONE: I9000TUBJG7
CSC: I9000TUUBJG4 (I don't think it's I9000TUBJG4 - I think there are 2 "UU"
Press Home key
Connect to KIES
Phone tries to connect, just says Connecting.....
I wait 2 minutes. Sometimes phone will mount after 2 minutes but Firmware areas is blank.
I go into RegEdit and delete DB Folder info and connect to KIES again. Same result. Makes no difference if I quit KIES and delete the DB folder or do it live.
I'm running KIES on a few computers so I can uninstall and check on various things with the install.
If I delete everything and use one of supplied Presets with SPOOF FW , then everything works fine.
It's almost like the i9000HKTTTT and PDA, Phone, and CSC are not matching and KIES gets lost and is not sure how to proceed.
For the csc im opretty sure its 1 U
Before deleting DB i would shut down kies and disconnect phone.
Also in pretty sure it makes no difference if its a preset or not
Sent from my GT-I9000 using XDA App

[Q] unable to uprgade firmware with kies

hey guys,
im using roto's rom for 1 month now, but when im connecting with kies
i get the message that my version can't get updated.
i think the problem is my csc.
PDA: JMI
PHONE: JMA
CSC: JMG (KOR)
i don't know if KOR stands for korea, i guess.
but is there a way that i can get back to stock CSC?
im using the SGT: P1000 euro model.
thanx in advance
Just flash a stock rom via Odin and you're good. Then connect to PC and update with Kies.
roadhero said:
Just flash a stock rom via Odin and you're good. Then connect to PC and update with Kies.
Click to expand...
Click to collapse
I've downloaded the latest euro firmware from samfirmware dot com and after the installation, my tab is at stock rom with the PHN csc code, this is the one that i needed for the dutch country and im able to receive update's trough kies.
Only kies is showing u have the latest firmware already, thats okey.
But im sure when 2.3 GingGerbread comes i'm able to get it with kies.
Good Luck!
@d a boskloper, i hope so... 2.3 will come to galaxy tab im waiting for this to happen...
Sent via Galaxy Tab

[Q] Revert back to Stock to connect and update with Kies?

I am thick as ....so please help.
My UK SGT is:
PDA; P1000xxjq1
Phone: P1000xxjpz
CSC: P1000oxajq1
Brought from CPW -
When I connect to Kies it shows 'this device cannot be updated'
Please in plain, simple, english what do I need to do to rectify this and be able to update through Kies?
I have tried connnecting to Odin 1.7 which is com8 and yellow.
My thought is to go back to stock and leave the hell alone! Unless you advise me otherwise.
Many thanks as always
EDIT: Oh what fun we had......Now I have completely ....... I have flashed JMK stock safe that I saved when I first upgraded to 2.3.3, now I have
PDA: P1000XWJMK
PHONE: P1000XXJPZ
CSC: P1000PHNJM5
As I said I am stupid so please save me before I break it?
X
Edit 2: Ok back to Version 1>
PDA; P1000xxjq1
Phone: P1000xxjpz
CSC: P1000oxajq1
what a waste of a few hours, still no stock.....
Edit 3: Got Kies to recognise and update the SGT yeah!
Damn it, now I still have 2.2
PDA: P1000WJMK
PHONE: P1000XXJMA
CSC: P1000PHNJM5
WTF is going on, can someone PLEASE lend me a hand?
Two things here:
1. Your sales code should match the PDA/PHONE/CSC for kies to 'see' ifcthere is an update.
2. As of this writing there is no gingerbread update for the UK.
Sent from my GT-P1000 using Tapatalk
I think you have an Asian stock firmware there. PHN is Philippines, I think. So Kies thinks you have a Philippines SGT.
I flashed JJ4 from samfirmware.com, which is a Russian firmware.
I think, from what I've read, that stock Gingerbread is available in UK (sorry to contradict Bongski). Unfortunately I didn't save my firmware before flashing away from stock, so I'm in the same boat as you - no Kies updates.
What you need is someone to provide an official CPW firmware, I think, which you would flash with Odin and then Kies should update you. I tried using SpoofFW from the market, but Kies only got to 25% before failing, then I had to go back to Odin and the JJ4 firmware.
If you're comfortable with Odin, you might want to try that?
If you do get the CPW firmware, please let me know...!
@treb1971
CSC PHN doesn't stand for Philippines. Philippine CSC's are as the following:
GLB - Philippines;Globe
SMA - Philippines;Smart
XTC - Philippines;Multiple
XTE - Philippines;SUN
My bad - apologies...
If you do get the CPW firmware, please let me know...!
Anyone got this and can help?
'I tried using SpoofFW from the market, but Kies only got to 25% before failing, then I had to go back to Odin and the JJ4 firmware.'
I have read 45 pages of SpoofFW and its way over my head!
Thanks in advance

Unable to upgrade firmware via Kies after flashing to stock rom

Hi,
I flashed my SGS to CM7 and don't really like it. I have downloaded the firmware ( I9000DXJF4 )from sammobile and flashed it. However, I am unable to upgrade the firmware using Kies to the new firmware available thru Samsung.
My current version is as followed
PDA: I9000DXJF4
PHONE: I9000DXJF4
CSC: I9000OLBJF4
From the look of my phone, everything seem to be back to its original setting, with all the singtel (my telco provider ) apps. Now I am trying to upgrade to Froyo 2.2 (I think) using Kies. Kies prompted that it is unable to update the firmware. I tried the latest version of kies and also version 1.5. Both are unable to do so.
Anyone can kindly advise?
Try changing your CSC code to XEU. I encountered some issues with KIES updates when having CSC code KOR.
Hi,
I tried to change to XUE but this option is not available. I go into CSC by *#272*HHMM#. Is it wrong?
*#272*???????????????# (??????????????? it's your IMEI, it must have 15 digits)
or try https://market.android.com/details?id=com.nfye.insanity.toolbox
Hi,
Thanks for your help. I got my IMEI code. It pop up in a small window. Then I tried to change the CSC using the method u mentioned. But nothing happen. When I press the call button, it say "USSD code running..." then follow by "UNKNOWN APPLICATION"
I also tried to install the software, but it is only for android 2.2 and above. I tried to find the crack version for the premium version but cant find any. Do you have the premium version? Can upload to mediafire and send me the link?
Never try to install via KIES ..
Install via ODIN the Firmware you want it's simply better, even if ODIN is unofficial.
Introductions you will find by googleing I think .. it's easy.
Good luck and have fun
Hi,
Ya, using Odin now. But still prefer Kies over Odin. A lot of stuff become automatic with Kies.
I just flash to DXJG4 hoping to be able to link to kies but it failed.
I read that once the lagfix is fixed, there will be problem with kies. Am I fixing the lagfix in anyway thus leading to this problem?
Did you get solution to your problem? I had the same problem with a Galaxy Wonder... when i tried to upgrade via kies i got this screen..
That I cannot post actually because the forum prevents me from doing it...
BUT...
I tried OTA upgrade with perfect results... And the funny thing is that I NEVER before could start OTA...
BTW everything's fine now and I bumped to 2.3.6 ggbrd
nuky8181 said:
Hi,
I flashed my SGS to CM7 and don't really like it. I have downloaded the firmware ( I9000DXJF4 )from sammobile and flashed it. However, I am unable to upgrade the firmware using Kies to the new firmware available thru Samsung.
My current version is as followed
PDA: I9000DXJF4
PHONE: I9000DXJF4
CSC: I9000OLBJF4
From the look of my phone, everything seem to be back to its original setting, with all the singtel (my telco provider ) apps. Now I am trying to upgrade to Froyo 2.2 (I think) using Kies. Kies prompted that it is unable to update the firmware. I tried the latest version of kies and also version 1.5. Both are unable to do so.
Anyone can kindly advise?
Click to expand...
Click to collapse
You can download all the recent firmware from sammobile and you can flash it via odin. Flashing stock ROM via Odin

[Q] Kies says upgrade not supported

hi samsung Kies says your device not supported via upgrading with kies
am on kingdroid rom
any idea why i changed csc to xeu
I'm assuming you'd have to go back to stock ROM to upgrade via Kies.
Sent from my GT-N7000 using xda premium
anubis1126 said:
hi samsung Kies says your device not supported via upgrading with kies
am on kingdroid rom
any idea why i changed csc to xeu
Click to expand...
Click to collapse
You need to be on stock rom for kies to work, just download the stock rom you want to download through kies and use odin
kids says device software not supported for update
Hi all,
I don't think this is hijacking...seems similar problem.
I flashed to ICS before it was released, now want to update to official version via kies...so I flashed to this with odin (downloaded from samfirmware.com)
PDA: i9100BOKK1
PHONE: i9100BOKJ1
CSC: i9100TMUKK1
But when I connect to kies it still says the 'device software does not support updating via kies'. I've tried flashing lots of other gingerbread firmwares from samfirmwares.com (need gingerbread so kies detects it needs updating). Really stuck now. How do i find which original stock firmware to flash to get dues to update? Tried the list on xda but still cqn't get it to allow an update. Is there something else that can cause kies to give that error, or is it definitely that I've got the wrong stock firmware? If so, is there a sure fire way to get the right one? I've tried the xda branded firmware list, that's where I got the link for this firmware above. Please help!
Wrong IMEI --> no Update
Check your IMEI (*#06#). Do you have your original number or is it changed to 004999010440000?
When I didn't succeed with OTA/Kies-Updates I found that the "developer IMEI" was the reason.

Categories

Resources