Database Develop

[Solved] Nexus one stuck on Colored X

hey guys
My nexus one is stuck on 4 colored X logo.
last night i was downloading apps from market and battery get discharged and phone get off..than i connect the charger and power on phone than it show me 4 color X on screen only..
i have tried clear storage but no work..
can any body tell me how to solve this problem ..
my nexus one is on android 2.2 n bootloder is 5.08
help me soon and thank you in advance
Ok let me tell you if u have the same problem than do as the steps..
i had this problem after googling long time i found this solution ..
1st check ur hboot 0.33 or 0.35??
my hboot is 0.35.0017 and i am on froyo 2.2 stock is FRF91.
just download the PASSIMG for FRF91 from
http://shipped-roms.com/download.ph...on_KT_KR_2.15.1010.2_FRF91_release_signed.zip
after download rename it "PASSIMG.zip" than put it on root of sd card..(formatted by fat32)
now put phone is bootloader mode by pressing vol up + power button
than fastboot verifies passimg file and ask you to flash this rom
now press vol up (yes)
than wait for 5 min to flash this rom on ur nexus one..
reboot and wait for 5min and it and done...
if u still not boot normal than again go to boot mode
select recovery
when u see trangle logo and android than press vol up +power buttong
than recovery menu show up
than wipe user data
and wie user catche
reboot
done..

swapniladsure said:
hey guys
My nexus one is stuck on 4 colored X logo.
last night i was downloading apps from market and battery get discharged and phone get off..than i connect the charger and power on phone than it show me 4 color X on screen only..
i have tried clear storage but no work..
can any body tell me how to solve this problem ..
my nexus one is on android 2.2 n bootloder is 5.08
help me soon and thank you in advance
Click to expand...
Click to collapse
Have you tried booting into recovery? Power+volume down...

Did you try to boot without the SD card? It helped me once.

Assuming you are running a custom recovery image, go to it via the bootloader menu (Turn phone on while holding volume down, then navigate to recovery using the volume buttons and selecting recovery using the power button). You should then be able to flash the same ROM you currently have installed. If however this is a completely stock device then you could run PASSIMG.zip via the bootloader to save your current install. If you need more info just ask

i cant able to access recovery mode
Hollow.Droid said:
Assuming you are running a custom recovery image, go to it via the bootloader menu (Turn phone on while holding volume down, then navigate to recovery using the volume buttons and selecting recovery using the power button). You should then be able to flash the same ROM you currently have installed. If however this is a completely stock device then you could run PASSIMG.zip via the bootloader to save your current install. If you need more info just ask
Click to expand...
Click to collapse
hey friends..
i can access bootmode but when i select recovery option by selecting power button than phone get restart and shows 4 color X again...
than i have flash to recovery "RA nexus one v2.1" to install custome rom...
but same it get restart when we select recovery option
help me what to do

Wipe everything and see if that does it.

Carloswithac said:
Wipe everything and see if that does it.
Click to expand...
Click to collapse
how to wipe??
where is wipe option...let me tell u that i cant able to access recovery menu ..without recovery menu i cant wipe or flash the phone??
is that true?

If you can flash a rom use 2.1.1 not 2.1. Assume you are doing that thru fastboot from pc.
Also, try the 3 finger reboot to get to recovery.
Hold down pwr/vol-/trackball at sametime until phone boots into bootloader, then navigate to recovery option. Then wipe all and restore a good bu. If this happened while dl'ing apps, one may be bad. Get all of them off phone and do one at a time.
Ken

i cant able to access recovery
rugmankc said:
If you can flash a rom use 2.1.1 not 2.1. Assume you are doing that thru fastboot from pc.
Also, try the 3 finger reboot to get to recovery.
Hold down pwr/vol-/trackball at sametime until phone boots into bootloader, then navigate to recovery option. Then wipe all and restore a good bu. If this happened while dl'ing apps, one may be bad. Get all of them off phone and do one at a time.
Ken
Click to expand...
Click to collapse
dude i cant able to access recovery menu...
when i press power button to get in recovery menu my phone get restart ....and stuck on 4 color X logo...
is there any solution to access recovery menu?? ..my phone get restart when click on recovery on bootloder

Ok, understand now.
You may have some options thru fastboot and the pc. Do you have SDK installed on pc. I am not good at that, someone else may have suggestions along those lines. Unless, as I asked, you already have used that method to flash amon ra 2.1.
If you can thru fastbboot with SDK I would still flash amon 2.1.1
Ken

rugmankc said:
Ok, understand now.
You may have some options thru fastboot and the pc. Do you have SDK installed on pc. I am not good at that, someone else may have suggestions along those lines. Unless, as I asked, you already have used that method to flash amon ra 2.1.
If you can thru fastbboot with SDK I would still flash amon 2.1.1
Ken
Click to expand...
Click to collapse
i have flash recovery file of amon 2.1.1 but after flash recovery problem not solved......it still get restart when i select recovery from bootloder mode...
help me

I am out of ideas, sorry
Someone will get you going
Sounds like you are using SDK, it may be the way to wipe and get back to an original phone state, then reupgrade. I don't know sdk very well.
Did you try the other idea of trying to get to recovery with sd card out of phone. If you do that you may want to back it up while out of phone if you have a sd card reader
Good Luck and wait for more help

rugmankc said:
I am out of ideas, sorry
Someone will get you going
Sounds like you are using SDK, it may be the way to wipe and get back to an original phone state, then reupgrade. I don't know sdk very well.
Did you try the other idea of trying to get to recovery with sd card out of phone. If you do that you may want to back it up while out of phone if you have a sd card reader
Good Luck and wait for more help
Click to expand...
Click to collapse
okkkk
thanks

Why does this thread say solved??
Just restore a stock image.
Follow the wiki guide for unroot/restore. Use the passimg method, with the FRG33 zip, which can be found by following the link on the word "here" on step 2...
http://forum.xda-developers.com/wik...des_&_Tutorials#Unroot_.2F_Restore_your_Nexus
Sent from my Nexus One using XDA App

I see you solved it on another forum... :-/
Sent from my Nexus One using XDA App

Thanks for your input DR
The back to stock and passimage was where I was thinking he needed to go. But, know nothing about doing that without a lot of research of my own.
Anyway glad he got it--what did he do to fix
ken

Looks like he did exactly what I posted. Funny thing was, it was a thread on another forum, where I had suggested the same thing to someone else, and he'd picked up the trail... xD
Sent from my Nexus One using XDA App

Glad he got it anyway

THANK YOU
Thanks man you r great , i have spend 24 hrs on this but only your method works . Thanks again
really really thanks
you saved my 3000 bucks

Where can i find fastboot instructions?

CyanogenMod

Guys,
I'm losing my mind here.
I've tried to install the CyanogenMod but I've run into some problems.
Why is it so damn difficult to install this?
I've spent 4 hours following different guides and none of them are step by step.
The ones that come close, never mention possible issues along the way which you then have to find on other forums.
Anyway,
can someone please help me with the following:
I'm getting stuck on booting into recovery.
I run the command and the phone reboots. however, it then presents a Triangle and an exclamation mark!
The instruction show that I am supposed to see a Green text recovery screen.
I'm having to hit the up volume and power button, which gives a blue text recovery screen with limited options.
I've tried the Amon_Ra's Recovery process and the ClockworkMod Recovery process to no avail!!!
I also tried the rom manager but the app keep giving "An error occurred while attempting to run privileged commands"
I know it's something that I'm doing wrong but I'm very close to throwing this phone out the window and going back to an iphone... This is just not ****ing worth it.
I've done everything up to reboot to recovery part from this guide: http://wiki.cyanogenmod.com/index.php?title=Nexus_One:_Full_Update_Guide
/please help.

Your Bootloader is unlocked?

artii said:
Guys,
I'm losing my mind here.
I've tried to install the CyanogenMod but I've run into some problems.
Why is it so damn difficult to install this?
I've spent 4 hours following different guides and none of them are step by step.
The ones that come close, never mention possible issues along the way which you then have to find on other forums.
Anyway,
can someone please help me with the following:
I'm getting stuck on booting into recovery.
I run the command and the phone reboots. however, it then presents a Triangle and an exclamation mark!
The instruction show that I am supposed to see a Green text recovery screen.
I'm having to hit the up volume and power button, which gives a blue text recovery screen with limited options.
I've tried the Amon_Ra's Recovery process and the ClockworkMod Recovery process to no avail!!!
I also tried the rom manager but the app keep giving "An error occurred while attempting to run privileged commands"
I know it's something that I'm doing wrong but I'm very close to throwing this phone out the window and going back to an iphone... This is just not ****ing worth it.
I've done everything up to reboot to recovery part from this guide: http://wiki.cyanogenmod.com/index.php?title=Nexus_One:_Full_Update_Guide
/please help.
Click to expand...
Click to collapse
Go to this thread. Read it. Download the apk. Root your device (you could not flash a custom recovery because you are not rooted!...). Download RomManager from the Market. Install a custom recovery through RomManager and you are done.

Reading other thread now.

dadennis said:
Your Bootloader is unlocked?
Click to expand...
Click to collapse
Yes,
Ran the following: fastboot oem unlock

artii said:
Yes,
Ran the following: fastboot oem unlock
Click to expand...
Click to collapse
mhhh ok. So you probably have no insecure boot image. That's probably why you can't flash any recovery from RomManager....
Try this at MoDaCo. Download an unsecure boot image... And try again.

Downloaded Universal Androot.
Clicked to root, goes OK ok ok ok ok ok ok ok then "Failed ! No ~~~ Fu Goo ~~~
edit - trying superoneclick

artii said:
Downloaded Universal Androot.
Clicked to root, goes OK ok ok ok ok ok ok ok then "Failed ! No ~~~ Fu Goo ~~~
Click to expand...
Click to collapse
if your running android 2.2.1 it wont work mate! try z4 root off the market worked for me!

ok, superoneclick seemed to have work and rooter the phone!
using rom manager to flash the clockwordmod recovery now. Lets see if it fails and gives and permissions error. If not, I'll boot into recovery and see if that works.
thanks for the assistance thus far.. /puts iphone back in the drawer.

recovery worked, ran the update.zip
downloaded the Cyanogen mode via rom manager, but when it tried the clockwork recovery, I get the triangle again... frustrating.

artii said:
recovery worked, ran the update.zip
downloaded the Cyanogen mode via rom manager, but when it tried the clockwork recovery, I get the triangle again... frustrating.
Click to expand...
Click to collapse
what update .zip?

I have the same problem...Well i rooted with superclick then when i go into recovery mode and click on recovery it shows a white triangle. I removed the memory card while rooting, could that be the problem?

You need to delete the following two files, and reinstall your custom recovery. These files restore the stock recovery during a full boot.
/system/etc/install-recovery.sh
/system/recovery-from-boot.p
Sent from my Nexus One using XDA App

Is it ok if i factory set and redo all the processes?

artii said:
Guys,
I'm losing my mind here.
I've tried to install the CyanogenMod but I've run into some problems.
Why is it so damn difficult to install this?
I've spent 4 hours following different guides and none of them are step by step.
The ones that come close, never mention possible issues along the way which you then have to find on other forums.
Anyway,
can someone please help me with the following:
I'm getting stuck on booting into recovery.
I run the command and the phone reboots. however, it then presents a Triangle and an exclamation mark!
The instruction show that I am supposed to see a Green text recovery screen.
I'm having to hit the up volume and power button, which gives a blue text recovery screen with limited options.
I've tried the Amon_Ra's Recovery process and the ClockworkMod Recovery process to no avail!!!
I also tried the rom manager but the app keep giving "An error occurred while attempting to run privileged commands"
I know it's something that I'm doing wrong but I'm very close to throwing this phone out the window and going back to an iphone... This is just not ****ing worth it.
I've done everything up to reboot to recovery part from this guide: http://wiki.cyanogenmod.com/index.php?title=Nexus_One:_Full_Update_Guide
/please help.
Click to expand...
Click to collapse
Did you try superboot? Works perfectly for me.

guy27 said:
Is it ok if i factory set and redo all the processes?
Click to expand...
Click to collapse
Yes
Sent from my Nexus One using XDA App

This is my preferred method of rooting.
http://www.nexusoneforum.net/forum/...mple-sdk-setup-manual-root-guide-windows.html
Remember, once rooted you will need to instal a custom recovery. You will also need to delete the two files I mentioned above, otherwise you will lose custom recovery when you boot...
Sent from my Nexus One using XDA App

danger-rat said:
You need to delete the following two files, and reinstall your custom recovery. These files restore the stock recovery during a full boot.
/system/etc/install-recovery.sh
/system/recovery-from-boot.p
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
Sorry, I'm a bit new to all this.
Can you please tell me exactly how to remove these files?
Do I need to download a terminal for the nexus one and run some rm commands?

aggazz said:
what update .zip?
Click to expand...
Click to collapse
The CyanogenMod file that I downloaded. Number 7. I changed it's name to update.zip and moved it to root of sd card when trying to do it manually without rom manager before.

artii said:
The CyanogenMod file that I downloaded. Number 7. I changed it's name to update.zip and moved it to root of sd card when trying to do it manually without rom manager before.
Click to expand...
Click to collapse
so are you now rooted and running cm7-build#10 nightly or still trying to do it?

[Q] Recovery not working and additional problems

Hi guys,
I have a few problems with my Motorola Milestone.
1. I can't get in to recovery. I only get an black screen (backlight is on)
2. I don't get any video in the bootloader. but RSD lite does recognizes it, and is able to flash it. When it's flashing I do get video only stating that there is software update busy.
3. When I boot up my phone I don’t get, a Motorola logo, but just a black screen (back light on) followed by the Android logo after a few minutes.
4. If I try to wake up the phone, the screen remains black, but the hardware keys to light up, I have to press the lock button multiple times to activate the screen. - Note when the screen remains black, it is responsive and I can unlock the phone, but it still remains black. And sometimes the colors are inverted, but when i make a screen of it with Screen Grabber (shoot me) it's in normal colors.
That kind of sums it up.
I have tried a few things to fix it. I have:
1. Cleared caches, and personal data
2. Flashed a different SBF en recovery
And since I can’t get in to recovery, I had to get Root via Z4 Root method and it works fine.
Afterwards I downloaden Rom-manger, and installed the ClockWork recovery, and tried to boot in Recovery via clockwork, but that didn’t work either. I also can’t get in to Recovery via a cold boot
I think the problems started when I was using CyanogenMod 7 RC4. It worked just fine, but after I installed it I couldn't get in to recovery.
Can I try something else to fix it? or should I flash it back to original state and RMA it?
Edit some additional information:
Frimware: 2.2.1
Frimware configuration: GAS_EMEA_UCAMS1FRYOQWRTEU_P005
Baseband version: 3GSMPU91A_U_91.09.00I
Baseband configuratuin version:UCALHLSMR2EMEAB1B806E.0R
Kernel Versuin: 2.6.32.9-ge635aa4 [email protected]#1
Build Number: SHOLS_U2_05.06.0
And is it possible to restore the orginal boot animation, without recovery?
TL.DR: Motorola Milestone --> CyanogenMod 7 RC4 --> no recovery & no video @ bootloader, plus additinal video problems --> back to orginal --> same problems.

BUMP: is there anyone with a possible soulution?

ClockWork recovery doesn't work on milestone.
So CM7 does boot up?

zeppelinrox said:
ClockWork recovery doesn't work on milestone.
So CM7 does boot up?
Click to expand...
Click to collapse
CM7 doesn't anymore as I removed it, and flashed a different SBF and recovery.
CyanogenMod 7 RC4 worked fine but I had a few video problems, and I could get in to recovery.
I will flash a different recovery tonight and try it out.

Only use androidiani open recovery
Sent from my Milestone using Tapatalk

zeppelinrox said:
Only use androidiani open recovery
Sent from my Milestone using Tapatalk
Click to expand...
Click to collapse
Flashed a different .sbf and placed the androidiani open recovery files on the Sd card root, but i still can't get in to recovery. I won't even get the /!\ screen. The phone does turn on, but will only get a black screen.

Which sbf?
Sent from my Milestone using Tapatalk

UK SHOLS_U2_02.36.0
I think I bricked it, I'm going to try to restore it or buy a new phone... >.<

BloemBlaster said:
UK SHOLS_U2_02.36.0
I think I bricked it, I'm going to try to restore it or buy a new phone... >.<
Click to expand...
Click to collapse
I don't think you bricked it... but damaged it in some way.
Could also be some hardware related stuff in the end.
Anyway try to wipe everything, that could be wiped.
Start into bootloader and try to install G.O.T. 2.2.1 using RSD again.
This one got the vulnerable recovery already integrated.
Then try to use the specific G.O.T. OpenRecovery on your sdcard to check system integrity.
Please try to take care of every single step and check out what happens....
If your hardware is doing fine, i'm pretty sure that you will get a working phone again.
P.S.: How about your bootloader version?
Good luck,
scholbert

scholbert said:
I don't think you bricked it... but damaged it in some way.
Could also be some hardware related stuff in the end.
Anyway try to wipe everything, that could be wiped.
Start into bootloader and try to install G.O.T. 2.2.1 using RSD again.
This one got the vulnerable recovery already integrated.
Then try to use the specific G.O.T. OpenRecovery on your sdcard to check system integrity.
Please try to take care of every single step and check out what happens....
If your hardware is doing fine, i'm pretty sure that you will get a working phone again.
P.S.: How about your bootloader version?
Good luck,
scholbert
Click to expand...
Click to collapse
I think my boatloader is 90.47 I'm not sure as I won't get any video in the boatloader.
I flashed the G.O.T 2.2.1but I can't get in to recovery, there is still no video only a blackscreen.
Is it posible the may have deleted the files for the logo?

BloemBlaster said:
I think my boatloader is 90.47 I'm not sure as I won't get any video in the boatloader.
I flashed the G.O.T 2.2.1but I can't get in to recovery, there is still no video only a blackscreen.
Is it posible the may have deleted the files for the logo?
Click to expand...
Click to collapse
You can try upgrading your bootloader to 90.78 from here.
Then try flashing GOT 2.2.1, then see if AOR boots up.

sileshn said:
You can try upgrading your bootloader to 90.78 from here.
Then try flashing GOT 2.2.1, then see if AOR boots up.
Click to expand...
Click to collapse
I flashed 90.78, and then reflashed GOT 2.2.1, but is still can't get into te recovery. I getting the same result, no motorola logo and a black screen with no /!\ logo

If your phone is recognised in adb, then you can use the link below to get into AOR directly. Just make sure you have AOR extracted to your sdcard.
http://forum.xda-developers.com/showthread.php?t=625950
Check the commands in the last post and enter them in order.

I was just looking at QtADB for somebody else's problem but it looks like you can use QtADB to boot recovery if the phone is recognized.
http://qtadb.wordpress.com/features/

Hi guys,
sorry for the late reply, but I'm also moving at the moment.
I have tired numerous things.
If I flash the 2.2.1 Firmware SHOLS_U2_05.26, I can get to the recovery selection screen, with the /!\ screen.
But if apply update.zip I will get an error message, stating "EOCD marker occurs after start of EOCD E:signature verification failed", something like that, I don't know the specific message out of my head
And if I flash a vurnable recovery only sbf, with the SHOLS_U2_05.26 I can't get the recovery screen, only a black screen.
zeppelinrox said:
I was just looking at QtADB for somebody else's problem but it looks like you can use QtADB to boot recovery if the phone is recognized.
http://qtadb.wordpress.com/features/
Click to expand...
Click to collapse
I will try thiss when I get home.
sileshn said:
If your phone is recognised in adb, then you can use the link below to get into AOR directly. Just make sure you have AOR extracted to your sdcard.
http://forum.xda-developers.com/showthread.php?t=625950
Check the commands in the last post and enter them in order.
Click to expand...
Click to collapse
I will try this if zepplelinrox method fails becaus I don't have any experince with adb. But the phone is recognised.

...........strange....
BloemBlaster said:
If I flash the 2.2.1 Firmware SHOLS_U2_05.26, I can get to the recovery selection screen, with the /!\ screen.
But if apply update.zip I will get an error message, stating "EOCD marker occurs after start of EOCD E:signature verification failed", something like that, I don't know the specific message out of my head
Click to expand...
Click to collapse
This is standard error, if vulnerable recovery is not installed and you try to start OpenRecovery.
BloemBlaster said:
And if I flash a vurnable recovery only sbf, with the SHOLS_U2_05.26 I can't get the recovery screen, only a black screen.
Click to expand...
Click to collapse
This is strange behaviour...
My last guess is, that something might be wrong with your vulnerable recovery sbf file (file corruption ???). There should have been some errors during flash...
Anyway, you might grab it here and try again:
http://gitorious.org/droid/openrecovery/blobs/master/zips/SHOLS/vulnerable_recovery.sbf
Good luck!
scholbert

sileshn said:
If your phone is recognised in adb, then you can use the link below to get into AOR directly. Just make sure you have AOR extracted to your sdcard.
http://forum.xda-developers.com/showthread.php?t=625950
Check the commands in the last post and enter them in order.
Click to expand...
Click to collapse
Still trying this, no luck yet. ADB isn't my strongest point
zeppelinrox said:
I was just looking at QtADB for somebody else's problem but it looks like you can use QtADB to boot recovery if the phone is recognized.
http://qtadb.wordpress.com/features/
Click to expand...
Click to collapse
The same goes for you, no luck yet. QtADB, work and it recognise my phone, but i can't any (re)boot commands.
scholbert said:
This is standard error, if vulnerable recovery is not installed and you try to start OpenRecovery.
This is strange behaviour...
My last guess is, that something might be wrong with your vulnerable recovery sbf file (file corruption ???). There should have been some errors during flash...
Anyway, you might grab it here and try again:
http://gitorious.org/droid/openrecovery/blobs/master/zips/SHOLS/vulnerable_recovery.sbf
Good luck!
scholbert
Click to expand...
Click to collapse
I actually have no idea how to download the sbf, form the site you have provided.
nevermind, I found it out . but now if my phone to connect to windows it doesn't recognizes it :S

BloemBlaster said:
but now if my phone to connect to windows it doesn't recognizes it :S
Click to expand...
Click to collapse
Before or after flashing the vulnerable recovery again?
Confusing...
scholbert

scholbert said:
Before or after flashing the vulnerable recovery again?
Confusing...
scholbert
Click to expand...
Click to collapse
Sorry for being confusing, it was after flashing vulnerable recovery, but my I'm flashing with a different system now and it working just fine.
If I try the .sbf you provided RSD gives a error "Failed flashing process. failed flashing process (0x17100);phone connected"

BloemBlaster said:
Sorry for being confusing, it was after flashing vulnerable recovery, but my I'm flashing with a different system now and it working just fine.
Click to expand...
Click to collapse
No problem...
BloemBlaster said:
If I try the .sbf you provided RSD gives a error "Failed flashing process. failed flashing process (0x17100);phone connected"
Click to expand...
Click to collapse
O.K. seems that something went wrong during download grab it here:
http://forum.xda-developers.com/showpost.php?p=13039348&postcount=17
BTW the link points to the OpenRecovery developers git rep... so this file is absolutely save.
Cheers,
scholbert

[Q] Help. Thrill wont boot (at&t logo), messed up pretty good

1. Rooted
2. Don't think I had USB Debugging on prior to this situation
3. Didn't flash a rom (dont even know how)
4. don't have clockworkmod
I installed the root required app LCD density changer by beansoft... tried permanently changing my lcd density (resolution) to 200, looked back at phone several minutes later and it was stuck on the at&t logo. I didn't do a backup like they said, in case anything goes wrong (didn't expect anything to go wrong.........). Now, everytime I try to boot my phone, i get stuck at the At&t logo screen (NOT infinite loop... just frozen logo). I have tried factory reset multiple times... but ofcourse that didn't work because that doesn't affect system preferences ( like the density/resolution).
Beansoft suggests this to fix the issue... but i can't get it to work
densitychanger.blogspot.(com) (towards the bottom, where the highlighted green text is)...
How can i get that file onto my phone's memory? My phone wont even turn on. I tried putting it on the microsd card, but the file doesnt show up in recovery.
Someone please help me... I just want my phone working again... By whatever means... Flashing a new rom, the update.zip method by beansoft... idk ... just want it working...
HELP :'(
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....

faresr said:
1. Rooted
2. Don't think I had USB Debugging on prior to this situation
3. Didn't flash a rom (dont even know how)
4. don't have clockworkmod
I installed the root required app LCD density changer by beansoft... tried permanently changing my lcd density (resolution) to 200, looked back at phone several minutes later and it was stuck on the at&t logo. I didn't do a backup like they said, in case anything goes wrong (didn't expect anything to go wrong.........). Now, everytime I try to boot my phone, i get stuck at the At&t logo screen (NOT infinite loop... just frozen logo). I have tried factory reset multiple times... but ofcourse that didn't work because that doesn't affect system preferences ( like the density/resolution).
Beansoft suggests this to fix the issue... but i can't get it to work
densitychanger.blogspot.(com) (towards the bottom, where the highlighted green text is)...
How can i get that file onto my phone's memory? My phone wont even turn on. I tried putting it on the microsd card, but the file doesnt show up in recovery.
Someone please help me... I just want my phone working again... By whatever means... Flashing a new rom, the update.zip method by beansoft... idk ... just want it working...
HELP :'(
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....
Click to expand...
Click to collapse
the 200 dpi setting does not work on the Thrill, which is why you are stuck in "bootloop"

faresr said:
1. Rooted
2. Don't think I had USB Debugging on prior to this situation
3. Didn't flash a rom (dont even know how)
4. don't have clockworkmod
I installed the root required app LCD density changer by beansoft... tried permanently changing my lcd density (resolution) to 200, looked back at phone several minutes later and it was stuck on the at&t logo. I didn't do a backup like they said, in case anything goes wrong (didn't expect anything to go wrong.........). Now, everytime I try to boot my phone, i get stuck at the At&t logo screen (NOT infinite loop... just frozen logo). I have tried factory reset multiple times... but ofcourse that didn't work because that doesn't affect system preferences ( like the density/resolution).
Beansoft suggests this to fix the issue... but i can't get it to work
densitychanger.blogspot.(com) (towards the bottom, where the highlighted green text is)...
How can i get that file onto my phone's memory? My phone wont even turn on. I tried putting it on the microsd card, but the file doesnt show up in recovery.
Someone please help me... I just want my phone working again... By whatever means... Flashing a new rom, the update.zip method by beansoft... idk ... just want it working...
HELP :'(
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....
Click to expand...
Click to collapse
Well looks like you're kinda screwed since you don't have clockwork installed, I'm not sure if you can install a new ROM... but have you tried EVERYTHING in android recovery?
If you don't know how to get to recovery... it's Hold down volume key + 3d + power, until it vibrates then use arrow keys to move around and 3d to select if you dont have clockwork...

faresr said:
1. Rooted
2. Don't think I had USB Debugging on prior to this situation
3. Didn't flash a rom (dont even know how)
4. don't have clockworkmod
I installed the root required app LCD density changer by beansoft... tried permanently changing my lcd density (resolution) to 200, looked back at phone several minutes later and it was stuck on the at&t logo. I didn't do a backup like they said, in case anything goes wrong (didn't expect anything to go wrong.........). Now, everytime I try to boot my phone, i get stuck at the At&t logo screen (NOT infinite loop... just frozen logo). I have tried factory reset multiple times... but ofcourse that didn't work because that doesn't affect system preferences ( like the density/resolution).
Beansoft suggests this to fix the issue... but i can't get it to work
densitychanger.blogspot.(com) (towards the bottom, where the highlighted green text is)...
How can i get that file onto my phone's memory? My phone wont even turn on. I tried putting it on the microsd card, but the file doesnt show up in recovery.
Someone please help me... I just want my phone working again... By whatever means... Flashing a new rom, the update.zip method by beansoft... idk ... just want it working...
HELP :'(
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....
Click to expand...
Click to collapse
Do you havet the emergency mode like most LG smartphones?Here is how you check pull out the battery and the plug it in(so your phone turns off) and then hold down the volume up +voulume down and power button if it worked you should see a yellow screen and a "Emergency mode!!" title.Then google for a kdz update tool and a kdz firmware for YOUR phone.You will also need the LG mobile united drivers.If you are on windows go to control panel and disable the lg modem.Then connect your phone(in emergency mode) to the computer open the update tool then click on select KDZ and navigate to your KDZ then in phone mode select emergency_something iys the only one.Than click flash KDZ and after about 5min your phone should reboot and it wilk work.Its importiant to note that you will lose everything on your phones memory its like you flash a rom you start out fresh you also loose root.Good luck!
Sent from my LG-P350 using XDA premium

faresr said:
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....
Click to expand...
Click to collapse
About the ADB it shows "device not found" because you didn't enable usb debugging.
Sent from my LG-P350 using XDA premium

Your gonna need to flash the .bin file for the thill
Thrill 4g on O3D

https://rapidshare.com/#!download|2...391931|R~E48599C3AAD1D44505C904C6E6A52A13|0|0
Thrill 4g on O3D

Download the above file then go to o3d forum general section sticky about how to flash .bin we dont have a .kdz for this phone so you gotta do it with the .bin
Thrill 4g on O3D

hoskopico said:
Download the above file then go to o3d forum general section sticky about how to flash .bin we dont have a .kdz for this phone so you gotta do it with the .bin
Thrill 4g on O3D
Click to expand...
Click to collapse
Ok thx I didn't know that it was different sorry if i made any confusion
Sent from my LG-P350 using XDA premium

Dont be sorry im just trying to help ya out our device has zero support from LG. When you select the files to flash use both the .bin and fls to flash you gotta find the P925.dll i think its in the dev forum here i dont remember which post though
Thrill 4g on O3D

Try the installing gingerbread and back to stock thread i think its in the mediafire download on there
Thrill 4g on O3D

I don't think i have the emergency download mode... I tried the button combination but it didn't work... so I still can't get my computer to recognize my phone to do anything...

Or try flashing a kdz for p920 then do the bin flash to get it back to stock froyo cuz you have to install the driver with phone pluged in and recognized
Thrill 4g on O3D

hoskopico said:
Dont be sorry im just trying to help ya out our device has zero support from LG. When you select the files to flash use both the .bin and fls to flash you gotta find the P925.dll i think its in the dev forum here i dont remember which post though
Thrill 4g on O3D
Click to expand...
Click to collapse
I know what you mean LG doesn't really care about mine device too.It's like they are nice untill you buy their phone.After that they don't care.
Sent from my LG-P350 using XDA premium
http://www.danasoft.com/ sig/****yeah287168.jpg

faresr said:
1. Rooted
2. Don't think I had USB Debugging on prior to this situation
3. Didn't flash a rom (dont even know how)
4. don't have clockworkmod
I installed the root required app LCD density changer by beansoft... tried permanently changing my lcd density (resolution) to 200, looked back at phone several minutes later and it was stuck on the at&t logo. I didn't do a backup like they said, in case anything goes wrong (didn't expect anything to go wrong.........). Now, everytime I try to boot my phone, i get stuck at the At&t logo screen (NOT infinite loop... just frozen logo). I have tried factory reset multiple times... but ofcourse that didn't work because that doesn't affect system preferences ( like the density/resolution).
Beansoft suggests this to fix the issue... but i can't get it to work
densitychanger.blogspot.(com) (towards the bottom, where the highlighted green text is)...
How can i get that file onto my phone's memory? My phone wont even turn on. I tried putting it on the microsd card, but the file doesnt show up in recovery.
Someone please help me... I just want my phone working again... By whatever means... Flashing a new rom, the update.zip method by beansoft... idk ... just want it working...
HELP :'(
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....
Click to expand...
Click to collapse
Im having the same problem as the person before me, but my phone is stuck on the lg logo screen. My phone is rooted and I do believe I have installed clockworkmod when root manager asked me to. My phone froze on me while going through the root manager app, when I tried formatting it through the reboot screen I ended up with E: can't mount CACHE:recovery/ command, E: can't mount CACHE:recovery/log, and E: can't open CACHE:recovery/log.
I've tried following instuctions from this site: http://www.lg-phones.org/how-to-flash-lg-thrill-4g-to-android-2-3-gingerbread.html
Until the last one cause i don't have an option to instal stuff from my sd card
I've also tried this one: http://http://forum.xda-developers.com/showthread.php?t=1270832
but again I have no option of the sd card or running abd commands
only options i have are:
reboot system now
wipe data/factory reset
wipe cache partition
wipe cache partition and package recovery
wipe nv dynamic partition

tbcxfallen said:
Im having the same problem as the person before me, but my phone is stuck on the lg logo screen. My phone is rooted and I do believe I have installed clockworkmod when root manager asked me to. My phone froze on me while going through the root manager app, when I tried formatting it through the reboot screen I ended up with E: can't mount CACHE:recovery/ command, E: can't mount CACHE:recovery/log, and E: can't open CACHE:recovery/log.
I've tried following instuctions from this site: http://www.lg-phones.org/how-to-flash-lg-thrill-4g-to-android-2-3-gingerbread.html
Until the last one cause i don't have an option to instal stuff from my sd card
I've also tried this one: http://http://forum.xda-developers.com/showthread.php?t=1270832
but again I have no option of the sd card or running abd commands
only options i have are:
reboot system now
wipe data/factory reset
wipe cache partition
wipe cache partition and package recovery
wipe nv dynamic partition
Click to expand...
Click to collapse
You don't have clockwork then.That is your stock recovery.I had this problem too.I flashed the wrong recovery and i got stuck on the LG logo.I fixed it using fastboot flasher idk is it the same combination but on my phone it is volume up+call+power button.Uf it is correct you should see a sign saying fastboot mode udc_start or something like that then use the fastboot flasher to flash a recovery image for your phone.After the flash is complete reboot your phone but first do a NORMAL boot so you can see if the problem is solved.If it worked then you can safely boot into recovery.
Sent from my LG-P350 using XDA premium

Thank you for your support guys, but as it was to difficult, I just got a new one from at&t

I am in similar situation but I am rooted AND I have CWM on my phone. I can boot into recovery just fine and install from sd card and all that jazz but when I try to boot normally I don't get past the LG logo. It just hangs there forever. Do I just have to get a flashable ROM onto the SD card and boot into recovery and flash??
I have already tried wiping data, cache and dalvik to no avail.
Any suggestions??

cwburns32 said:
I am in similar situation but I am rooted AND I have CWM on my phone. I can boot into recovery just fine and install from sd card and all that jazz but when I try to boot normally I don't get past the LG logo. It just hangs there forever. Do I just have to get a flashable ROM onto the SD card and boot into recovery and flash??
I have already tried wiping data, cache and dalvik to no avail.
Any suggestions??
Click to expand...
Click to collapse
What did you do?When did the problem start(I mean after doing this or that)
Sent from my LG-P350 using XDA premium

nerot said:
What did you do?When did the problem start(I mean after doing this or that)
Sent from my LG-P350 using XDA premium
Click to expand...
Click to collapse
I rooted phone, everything fine. I flashed CWM, everything fine. When I rebooted system from CWM then phone booted but hung at the LG logo. Now only thing I can do is boot into recovery or boot to the LG logo for hours... Don't even know how this could have happened as I haven't flashed anything, just root and CWM...

[Q] Nexus Stuck at X screen

Hi
Myself unlocked boot loader flashed RA recovery and all went fine and it is not booting after the X screen
I have seen lot of people asking the same questions and N number of threads.
I have tried all these reading the other threads.
1. Tried passimg method almost 50 times and was successful and not booting after X
2.Tried flashing recovery again and flashing was fine but stuck at X screen
3.All was tried through fastboot comments (Screen shot atchd)
4.Tried flashing radio 5.12.00.08 and failed(Image update error)
5.read all the posts since yesterday and the others are also left in between !
Screen shot attached:
Kindly help !!

What radio do you have now and where did you download the 5.12.00.08 radio? From the wiki? It's not really necessary to update from 5.08.00.04 to 5.12.00.08.

Mr.Tommert
I was using the original rom came with the phone and wanted to install the JB.Hence tried to install recovery .
I was stuk at X screen and tried passimg many times and some times it boot and again when charger is plugged in ,it restarts.
Now it is not even booting .tried to install passimg and it is happening,but not booting up.
But now i am stuck up at X screen.
Downloaded the radio from wiki!
Help pls!!

can you access fastboot usb mode n recovery?
Sent from my Nexus One using Tapatalk

hi! i am able to access fastboot ! when clicked on to recovery ,it will again restart !! today luckily ,i was able to get inside also after passimg method and then after sometime again it got restarted and X appeared...!! now again stuck with X.atleast got confidence that it is not bricked!!
Any help please will be highly appreciated.

amjithg said:
hi! i am able to access fastboot ! when clicked on to recovery ,it will again restart !! today luckily ,i was able to get inside also after passimg method and then after sometime again it got restarted and X appeared...!! now again stuck with X.atleast got confidence that it is not bricked!!
Any help please will be highly appreciated.
Click to expand...
Click to collapse
it seems lyk the strange problem that my cousin's n1 had. wat i did was. (read fully n download and transfer the required files to sd)
1.press n hold volume down + power button
2.enter fastboot usb mode.
3.connect phone to system.
4.it will install the drivers
5.in cmd prompt navigate to folder where fastboot.exe resides and type FASTBOOT DEVICES to make sure your device is identified.
6.nw flash recovery.img (u should have that in the fastboot folder)
7.nw enter into recovery
8.nw to make the recovery stick, download this zip http://db.tt/ooDaCnU and flash it
9. nw download this stock 2.3.4 rom http://android.clients.google.com/p...b119f8.signed-passion-ota-102588.656099b1.zip and install zip from sd card.
10.reboot n njoy
Sent from my Nexus One using Tapatalk

hi
Thank you for the reply !
I tried flashing recovery RA (for almost 50 times) .the flashing is going on well.
fast boot devices is showing the device as well.
But after flashing the recovery ,it is not entering the recovery.when clicked on power button,with recovery highlighted(in bootloader) it restarts..!!
will flashing of any other recovery or boot image will help ?
kindly reply !

hmmm. yea. may be u can try different recovery.img.
also erase everything via fastboot first
Sent from my Nexus One using Tapatalk

Hi!
1.Tried flashing another recovery
2.Flashed FRG33 ,through fast boot method after wiping !
3.Tried recovery and still not entering inside.
Help plss!!

help plssss!!!!

amjithg said:
help plssss!!!!
Click to expand...
Click to collapse
ensure whatever recovery you are flashing is correctly flashed and then ensure the correct supported ROM.
Also note you should download the rooted version of FRG33 or any custom recovery if your device is rooted.