Hi
Myself unlocked boot loader flashed RA recovery and all went fine and it is not booting after the X screen
I have seen lot of people asking the same questions and N number of threads.
I have tried all these reading the other threads.
1. Tried passimg method almost 50 times and was successful and not booting after X
2.Tried flashing recovery again and flashing was fine but stuck at X screen
3.All was tried through fastboot comments (Screen shot atchd)
4.Tried flashing radio 5.12.00.08 and failed(Image update error)
5.read all the posts since yesterday and the others are also left in between !
Screen shot attached:
Kindly help !!
What radio do you have now and where did you download the 5.12.00.08 radio? From the wiki? It's not really necessary to update from 5.08.00.04 to 5.12.00.08.
Mr.Tommert
I was using the original rom came with the phone and wanted to install the JB.Hence tried to install recovery .
I was stuk at X screen and tried passimg many times and some times it boot and again when charger is plugged in ,it restarts.
Now it is not even booting .tried to install passimg and it is happening,but not booting up.
But now i am stuck up at X screen.
Downloaded the radio from wiki!
Help pls!!
can you access fastboot usb mode n recovery?
Sent from my Nexus One using Tapatalk
hi! i am able to access fastboot ! when clicked on to recovery ,it will again restart !! today luckily ,i was able to get inside also after passimg method and then after sometime again it got restarted and X appeared...!! now again stuck with X.atleast got confidence that it is not bricked!!
Any help please will be highly appreciated.
amjithg said:
hi! i am able to access fastboot ! when clicked on to recovery ,it will again restart !! today luckily ,i was able to get inside also after passimg method and then after sometime again it got restarted and X appeared...!! now again stuck with X.atleast got confidence that it is not bricked!!
Any help please will be highly appreciated.
Click to expand...
Click to collapse
it seems lyk the strange problem that my cousin's n1 had. wat i did was. (read fully n download and transfer the required files to sd)
1.press n hold volume down + power button
2.enter fastboot usb mode.
3.connect phone to system.
4.it will install the drivers
5.in cmd prompt navigate to folder where fastboot.exe resides and type FASTBOOT DEVICES to make sure your device is identified.
6.nw flash recovery.img (u should have that in the fastboot folder)
7.nw enter into recovery
8.nw to make the recovery stick, download this zip http://db.tt/ooDaCnU and flash it
9. nw download this stock 2.3.4 rom http://android.clients.google.com/p...b119f8.signed-passion-ota-102588.656099b1.zip and install zip from sd card.
10.reboot n njoy
Sent from my Nexus One using Tapatalk
hi
Thank you for the reply !
I tried flashing recovery RA (for almost 50 times) .the flashing is going on well.
fast boot devices is showing the device as well.
But after flashing the recovery ,it is not entering the recovery.when clicked on power button,with recovery highlighted(in bootloader) it restarts..!!
will flashing of any other recovery or boot image will help ?
kindly reply !
hmmm. yea. may be u can try different recovery.img.
also erase everything via fastboot first
Sent from my Nexus One using Tapatalk
Hi!
1.Tried flashing another recovery
2.Flashed FRG33 ,through fast boot method after wiping !
3.Tried recovery and still not entering inside.
Help plss!!
help plssss!!!!
amjithg said:
help plssss!!!!
Click to expand...
Click to collapse
ensure whatever recovery you are flashing is correctly flashed and then ensure the correct supported ROM.
Also note you should download the rooted version of FRG33 or any custom recovery if your device is rooted.
Related
So a buddy sent me his N1 that had been stuck in a boot loop. I asked him to give me the details of what the phone had been through. Of course he didn't know squat! I assume it's a European version (he's in the Philippines).
When I got the N1 it didn't boot to recovery but it did boot to bootloader. I was finally able to flash Aman_RA recovery thru adb. Now I can boot into recovery. I've tried flashing 3 different roms (all MD5 checks pass) but the N1 one shoots out different errors for each ROM. For ex. Missing wallpaper/desire.jpg or some other weird error.
I've been searching for 2 weeks. When I enter bootloader mode and hboot, the device looks for a PASSDIAG.zip. I dl a stock image from the developer.htc site and renamed it to PASSDIAG.zip. If finds it but then gives error about missing PASSDIAG.nbh or image not being the right one.
If I use adb to wipe the cache (in bootloader mode) it works fine, but when I try to wipe userdata I get the "FAILED" to wipe error. Fastboot windows-devices gives me HTCxxxxxxxx so i know it communicates. And i was able to flash recovery twice. No problems .
EDIT: IF YOU NOTICE IN THE SECOND IMAGE THE BLUE STATUS BAR SHOWS UP AND GOES TO THE TOP AS IF IT ACTUALLY WAS DOING SOMETHING
I tried to flash an image using fastboot and adb (flash userdata userdata.img ) but it just hangs for ever.
I just can't flash an Os on this thing. Trully, bricked me thinks?
How do I know what original build should be on it? As I read to flash an original recovery. I can only get the Aman_RA to flash.
Someone mentioned to get ahold of the stock build for EPF30. How in the world do they know that. I sure as hell can't find it...lol. Everything in google search points me to everything but that build.
Thanks in advanced.
Go to Wiki, link in my signature.
Install Amon_Ra's latest recovery.
Go to Stock ROM section and download the only Eclair ROM it has there, the first one.
Go to Guides, look at "unroot/restore", PASSIMG.ZIP method. Execute.
If it doesn't flash the PASSIMG - post the error it gives.
If it does and you're on Eclair - congratulations, work your way from there.
I see 26 images. I assume this one is it "Passion-EPE54B.zip"? Seeing as the first one is ATT. Thank you for pointing me to this wiki. Can't wait to try it.
Did you try selecting clear storage?
@ SiN Well, it's weird. In recovery I can wipe storage, cache and dalvic cache. I wiped everything that could be wiped. And still got errors on any rom I tried.
So in fastboot adb I tried
Code:
fastboot erase userdata
and I get an error FAILED. But when I do
Code:
fastboot erase cache
it says OK!
I'm gonna try what Jack suggest right now....I will post update in a few hours? LOL, I'm @ work and will try to get this to work from these PCs
The passimg you used, it wasn't a zip within a zip was it? That can cause the blue bar thing.
So the .zip I used was the second from the top in the stock rom wiki. I think EPF45, and I get an error. I renamed it to PASSIMG.zip (made sure its not a zip of a zip) and got the red status bar. One error...."cannot unzzip .zip" see picture. Now I get static x screen that turns to pixelated dust. LOL...almost there. I guess its a rom region thing?
Sent from my HTC HD2 using XDA App(CM6)
Try:
fastboot erase system
Click to expand...
Click to collapse
Repeat several times.
Looks like your system partition fails when attempting write. Might be a failed partition, might be something recoverable.
Then try to apply PASSIMG again.
fastboot erase system
erasing 'system'.... FAILED <remote: not allowed>
Click to expand...
Click to collapse
Sent from my HTC HD2 using XDA App
EDIT: I tired
fastboot oem unlock
Click to expand...
Click to collapse
and it says
device already UNLOCKED!
Click to expand...
Click to collapse
Haha, man this fool really did a number on it. He said he installed pinochle from the market and then it stopped booting. IDK
Hello ,
i cannot start my phone (nexus one) .
i search more time on the forum but i dont understand perfectly.
in recovery mode appear "tricolore" screen ... is wrong ? if i put phone in usb computer nothing happened. (no usb device found)
where is my solution for can use my nexus one ?
system is android 2....
thanks in advance and sorry for my bad english /
if someone can explain me step by step i will appreciated.
Can you explain tricolor screen?
Sent from my Nexus One using XDA App
some like that: first image ... with three little androids on the skateboards botton without any words
give me your email or send to me a "hello" from my email : [email protected] because im a new member and i cant post linked to image here (privilege)
You mean like this?
Sent from my Nexus One using XDA App
yes ... is this that ,.,.,\when i press down volume + power
and four colour screen when phone started normally (power) and phone is freeze
What were you doing before the problem started?
Sent from my Nexus One using XDA App
give me your email for send to you image / here i cant post
Don't think I need an image...
The pic I posted is the bootloader (not recovery). Recovery looks black...
Tell me what you were doing, and we'll take it from there...
Sent from my Nexus One using XDA App
i attach images
I can go in boot mode too ...
I have this:
-Fast boot
-Recovery
-Clear Storage
-Sim Lock
when i press fast boot i have another screen with : bootloader,reboot,reboot bootloader,power down
i press boot loader screen is freeze .
where i get wrong ?
SD checking......
Loading [Passdiag.zip]
error image
and its freeze again
hey guys
My nexus one is stuck on 4 colored X logo.
last night i was downloading apps from market and battery get discharged and phone get off..than i connect the charger and power on phone than it show me 4 color X on screen only..
i have tried clear storage but no work..
can any body tell me how to solve this problem ..
my nexus one is on android 2.2 n bootloder is 5.08
help me soon and thank you in advance
Ok let me tell you if u have the same problem than do as the steps..
i had this problem after googling long time i found this solution ..
1st check ur hboot 0.33 or 0.35??
my hboot is 0.35.0017 and i am on froyo 2.2 stock is FRF91.
just download the PASSIMG for FRF91 from
http://shipped-roms.com/download.ph...on_KT_KR_2.15.1010.2_FRF91_release_signed.zip
after download rename it "PASSIMG.zip" than put it on root of sd card..(formatted by fat32)
now put phone is bootloader mode by pressing vol up + power button
than fastboot verifies passimg file and ask you to flash this rom
now press vol up (yes)
than wait for 5 min to flash this rom on ur nexus one..
reboot and wait for 5min and it and done...
if u still not boot normal than again go to boot mode
select recovery
when u see trangle logo and android than press vol up +power buttong
than recovery menu show up
than wipe user data
and wie user catche
reboot
done..
swapniladsure said:
hey guys
My nexus one is stuck on 4 colored X logo.
last night i was downloading apps from market and battery get discharged and phone get off..than i connect the charger and power on phone than it show me 4 color X on screen only..
i have tried clear storage but no work..
can any body tell me how to solve this problem ..
my nexus one is on android 2.2 n bootloder is 5.08
help me soon and thank you in advance
Click to expand...
Click to collapse
Have you tried booting into recovery? Power+volume down...
Did you try to boot without the SD card? It helped me once.
Assuming you are running a custom recovery image, go to it via the bootloader menu (Turn phone on while holding volume down, then navigate to recovery using the volume buttons and selecting recovery using the power button). You should then be able to flash the same ROM you currently have installed. If however this is a completely stock device then you could run PASSIMG.zip via the bootloader to save your current install. If you need more info just ask
i cant able to access recovery mode
Hollow.Droid said:
Assuming you are running a custom recovery image, go to it via the bootloader menu (Turn phone on while holding volume down, then navigate to recovery using the volume buttons and selecting recovery using the power button). You should then be able to flash the same ROM you currently have installed. If however this is a completely stock device then you could run PASSIMG.zip via the bootloader to save your current install. If you need more info just ask
Click to expand...
Click to collapse
hey friends..
i can access bootmode but when i select recovery option by selecting power button than phone get restart and shows 4 color X again...
than i have flash to recovery "RA nexus one v2.1" to install custome rom...
but same it get restart when we select recovery option
help me what to do
Wipe everything and see if that does it.
Carloswithac said:
Wipe everything and see if that does it.
Click to expand...
Click to collapse
how to wipe??
where is wipe option...let me tell u that i cant able to access recovery menu ..without recovery menu i cant wipe or flash the phone??
is that true?
If you can flash a rom use 2.1.1 not 2.1. Assume you are doing that thru fastboot from pc.
Also, try the 3 finger reboot to get to recovery.
Hold down pwr/vol-/trackball at sametime until phone boots into bootloader, then navigate to recovery option. Then wipe all and restore a good bu. If this happened while dl'ing apps, one may be bad. Get all of them off phone and do one at a time.
Ken
i cant able to access recovery
rugmankc said:
If you can flash a rom use 2.1.1 not 2.1. Assume you are doing that thru fastboot from pc.
Also, try the 3 finger reboot to get to recovery.
Hold down pwr/vol-/trackball at sametime until phone boots into bootloader, then navigate to recovery option. Then wipe all and restore a good bu. If this happened while dl'ing apps, one may be bad. Get all of them off phone and do one at a time.
Ken
Click to expand...
Click to collapse
dude i cant able to access recovery menu...
when i press power button to get in recovery menu my phone get restart ....and stuck on 4 color X logo...
is there any solution to access recovery menu?? ..my phone get restart when click on recovery on bootloder
Ok, understand now.
You may have some options thru fastboot and the pc. Do you have SDK installed on pc. I am not good at that, someone else may have suggestions along those lines. Unless, as I asked, you already have used that method to flash amon ra 2.1.
If you can thru fastbboot with SDK I would still flash amon 2.1.1
Ken
rugmankc said:
Ok, understand now.
You may have some options thru fastboot and the pc. Do you have SDK installed on pc. I am not good at that, someone else may have suggestions along those lines. Unless, as I asked, you already have used that method to flash amon ra 2.1.
If you can thru fastbboot with SDK I would still flash amon 2.1.1
Ken
Click to expand...
Click to collapse
i have flash recovery file of amon 2.1.1 but after flash recovery problem not solved......it still get restart when i select recovery from bootloder mode...
help me
I am out of ideas, sorry
Someone will get you going
Sounds like you are using SDK, it may be the way to wipe and get back to an original phone state, then reupgrade. I don't know sdk very well.
Did you try the other idea of trying to get to recovery with sd card out of phone. If you do that you may want to back it up while out of phone if you have a sd card reader
Good Luck and wait for more help
rugmankc said:
I am out of ideas, sorry
Someone will get you going
Sounds like you are using SDK, it may be the way to wipe and get back to an original phone state, then reupgrade. I don't know sdk very well.
Did you try the other idea of trying to get to recovery with sd card out of phone. If you do that you may want to back it up while out of phone if you have a sd card reader
Good Luck and wait for more help
Click to expand...
Click to collapse
okkkk
thanks
Why does this thread say solved??
Just restore a stock image.
Follow the wiki guide for unroot/restore. Use the passimg method, with the FRG33 zip, which can be found by following the link on the word "here" on step 2...
http://forum.xda-developers.com/wik...des_&_Tutorials#Unroot_.2F_Restore_your_Nexus
Sent from my Nexus One using XDA App
I see you solved it on another forum... :-/
Sent from my Nexus One using XDA App
Thanks for your input DR
The back to stock and passimage was where I was thinking he needed to go. But, know nothing about doing that without a lot of research of my own.
Anyway glad he got it--what did he do to fix
ken
Looks like he did exactly what I posted. Funny thing was, it was a thread on another forum, where I had suggested the same thing to someone else, and he'd picked up the trail... xD
Sent from my Nexus One using XDA App
Glad he got it anyway
THANK YOU
Thanks man you r great , i have spend 24 hrs on this but only your method works . Thanks again
really really thanks
you saved my 3000 bucks
Where can i find fastboot instructions?
Hii all!
I've made a new post to explain thing better. My main problem is that I can't get into my recovery menu.
A few weeks ago I've successfully rooted my Milestone (bootloader 90.78 > vulnerable recovery From this post > Copied OpenRecory + update.zip (G.O.T. OpenRecovery) to my SD card) But then i wanted to install a custom ROM. So I thought it was good to start over with a clean phone, I followed the "[HOW-TO] Get your Milestone back to stock" guide. I downloaded the following .sbf "SHOLS_U2_02.36.0_UCASHLSMR2EMEAB1B806D.0R_PDS003_USASHLS00RTGB_P026_A019_HWp2a_1FF.sbf", flashed my phone with this .sbf, all went fine. Then the vulnerable recovery needed to be installed, I've tried several vulnerables. But after completed the install I cant get into the recovery, I'm stuck at the /!\ screen. Can someone help me?
Thanks
OLD POST:
[old]Hii all!
I have a really nasty problem here. I can't open the recovery menu, I'm stuck at the /!\ image, tried the two key combinations, but no one works.
I already rooted my phone and I wanted to install a custom ROM. But before this I wanted a clean/stock phone, so I flashed him to stock .sbf. Then I installed vulnerable to get into recovery menu >> doesn't work. OK. Lets install the bootloader again + vulnerable >> doesn't work. Can someone help me with this, I really want a custom ROM and root (again)
Thanks, eXtink[/old]
Flas G.O.T. ) cause it already has vulnerable recovery injected then install open recovery 3.3 and play
Sent from my Milestone using Tapatalk
Pressing <volume up> + <camera> at the /!\ screen does nothing?
Hi, I also have this problem.
there is openrecovery 3.3? where can i get this.
The dev website only shows 2.1? is their site outdated?
Hi!
I'm suffering the same problem:
I tried with the phone as I got it (no flash nor anything) - Could enter recovery mode (Power + CAM) but no menu display with VOLUP + CAM at the same time nor first VOLUP and then CAM.
I tried installing openrecovery and also androidiani, but after flashing vulnerable recoveri 90.78 and starting in recovery mode the same problem, no menu.
I flashed G.O.T telus 2.2.1 and still the same problem
Any ideas?
TioBorracho said:
Hi!
I'm suffering the same problem:
I tried with the phone as I got it (no flash nor anything) - Could enter recovery mode (Power + CAM) but no menu display with VOLUP + CAM at the same time nor first VOLUP and then CAM.
I tried installing openrecovery and also androidiani, but after flashing vulnerable recoveri 90.78 and starting in recovery mode the same problem, no menu.
I flashed G.O.T telus 2.2.1 and still the same problem
Any ideas?
Click to expand...
Click to collapse
A few points:
You should ALWAYS be able to get to the default recovery. The default
recovery is not useful for flashing ROMs, but if you can't get to it, you have serious issues.
The default recovery can be accessed by powering on the phone with camera pressed down until you see the exclamation/triangle icon/cell phone icon.
RELEASE all buttons.Then press VOLUME UP (leaving it pressed down) and hit the camera button again (once). It should INSTANTLY give you a recovery menu.
You should now be in the RECOVERY (not OpenRecovery). You should a small number of options : reboot, apply update.zip,etc.
If you have not correctly installed the Vulnerable Recovery, you won't be able to use the apply update.zip option to run Open Recovery, Androidiani, etc.
The following thread is the best guide to get a recovery installed. Follow it exactly.
http://forum.xda-developers.com/showthread.php?t=932196
The best recovery for Milestone is Androidiani. GOT recovery is OLD. OpenRecovery works fine, but Androidiani has more options for Milestone.
The general steps are:
1) Flash a GOT sbf using RSD lite. This installs vulnerable recovery
2) Download Androidiani. Put its update.zip in the ROOT of you SDCARD and put the OpenRecovery FOLDER (unzipped) also in the ROOT of the SDcard
3) Enter Recovery (as described above)
4) Choose Apply update.zip to get into Androidiani
5) Follow instructions for the ROM you want to use...
I hope this helps! It has worked on thousands of milestones. I see no reason for it to fail on yours.
Caz666 said:
A few points:
You should ALWAYS be able to get to the default recovery. The default
recovery is not useful for flashing ROMs, but if you can't get to it, you have serious issues.
Click to expand...
Click to collapse
I guess I have those serious issues. I'll try one more time and post a video so I fell less stupid
TioBorracho said:
I guess I have those serious issues. I'll try one more time and post a video so I fell less stupid
Click to expand...
Click to collapse
Post the video and we can see if you have a problem.
Did you try starting from scratch using the appropriate GOT sbf?
The recovery gets overwritten by that sbf, so if this is succesful, any corrupted recovery problem should go away.
Sent from my Milestone using Tapatalk
Try plugging your usb cable between your pc and phone, and then enter recovery
Caz666 said:
Post the video and we can see if you have a problem.
Did you try starting from scratch using the appropriate GOT sbf?
The recovery gets overwritten by that sbf, so if this is succesful, any corrupted recovery problem should go away.
Sent from my Milestone using Tapatalk
Click to expand...
Click to collapse
I flashed GOT Telus 2.2.1 full, at least I've got froyo now, but still no recovery menu. I also tried without SD and SIM to check if something could be wrong with them but no luck.
I'll make the video in some minutes (no sound, I'm at work. I tried to make it yesterday but my daughter thought it was better to play with the computer instead)
To eneter in recovery mod slide out keyboard and pres X button + power button and release them when you see the /!\ then apply update.zip
Here is de link to the youtube video
Code:
watch?v=ukzMPcI2Css
friz said:
To eneter in recovery mod slide out keyboard and pres X button + power button and release them when you see the /!\ then apply update.zip
Click to expand...
Click to collapse
I think that only works with newer bootloaders. I've got 90.73.
same problem
hi,
im suffering the same issue.. i get till the triangle but "vol up + camera" does nothing - through the buttons work within android itself
i've tried GOT and the vulnerable-bootloader-only SBFs
bootloader version is .72
any ideas?
Well, at least I'm not the only one. I'm thinking about trying motorola service...
I'm out of warranty. I'll check how much will they say.motorola service here sucks. if you manage to solve it please let me know.
Sent from my Milestone using Tapatalk
I have the same problem, bootload 90.74
Hi, can anyone please help with this?
I have a milestone that has root access, have followed step by step instructions on how to get into recovery so that I can flash a custom rom, vulnerable recovery has been flashed to it and open recovery been put on the memory card but it wont recognise open recovery, it just goes into normal bootloader screen. What sshould be done to make it enter boatloader as instructions have been followed step by step?
Thanks for your help
rtardedman said:
Hi, can anyone please help with this?
I have a milestone that has root access, have followed step by step instructions on how to get into recovery so that I can flash a custom rom, vulnerable recovery has been flashed to it and open recovery been put on the memory card but it wont recognise open recovery, it just goes into normal bootloader screen. What sshould be done to make it enter boatloader as instructions have been followed step by step?
Thanks for your help
Click to expand...
Click to collapse
As stated in the name, to get into OpenRecovery you want to enter Recovery mode. When the phone is off, hold power+x until you see the Motorola logo. Then hold camera+vol-up to enter recovery mode, select update.zip and then you will be in OR.
I've done that but the only thing that shows up is the bootloader which says batteryk
ok to program
transfer mode: usb
thats the part that it wont go past
did you turn off the phone before you tried?
Yes, tried it with phone off first but no luck
Sent from my Milestone using XDA App
I hv the same problem. The update file is corrupted.
I flashed back to original rom then recovery then open recovery...
finally, custom rom.
Happened to me to way before. It was because the sbf file we flash through rsd lite was corrupted or something. If you need a good version maybe I can tell you where to find it.good luck.
rtardedman said:
I've done that but the only thing that shows up is the bootloader which says batteryk
ok to program
transfer mode: usb
thats the part that it wont go past
Click to expand...
Click to collapse
Sent from my Milestone using XDA App
Yeah because I tried it with 3 sbf roms, could you post a link to the one that you used? Thanks heaps
Hi I tried to install CWM recovery and my bootloader was unlocked i'm sure. But after reboot it stucks in boot animation!!! So that i haven't access to recovery and unfortunately when I try to put phone into S/W mode a white and black striped screen comes up and in this mode every KDZ flasher says that can't find phone or it's not connected!!:crying::crying::crying: What can I do??? I'm really scared!!! Please help!!!!:crying::crying::crying:
My current Rom is Hong kong 4.1.2
nobody's here?
fifali190 said:
Hi I tried to install CWM recovery and my bootloader was unlocked i'm sure. But after reboot it stucks in boot animation!!! So that i haven't access to recovery and unfortunately when I try to put phone into S/W mode a white and black striped screen comes up and in this mode every KDZ flasher says that can't find phone or it's not connected!!:crying::crying::crying: What can I do??? I'm really scared!!! Please help!!!!:crying::crying::crying:
My current Rom is Hong kong 4.1.2
Click to expand...
Click to collapse
nobody's here? please help!! I'm really in problem!!!
is fastboot working?
which cwm and which method did you use to install cwm?
How much battery did you have in the phone when you did this?
Rudjgaard said:
is fastboot working?
which cwm and which method did you use to install cwm?
How much battery did you have in the phone when you did this?
Click to expand...
Click to collapse
honestly i don't know how to use fastboot in this condition.i installed cwm touch recovery version 6.0.1 (i'm not sure for version) with an app named LG 4X Recovery app from here: http://forum.xda-developers.com/showthread.php?t=1826378 and the battery was full
Why would you use something from a thread dated 2012?!?
download recent twrp or cwm img
go into bl and flash manually -> fastboot flash recovery recovery.img
sorry
Rudjgaard said:
Why would you use something from a thread dated 2012?!?
download recent twrp or cwm img
go into bl and flash manually -> fastboot flash recovery recovery.img
Click to expand...
Click to collapse
sorry my friend can you explain it step by step from zero for a beginner?? I need help really!! please!!
Same issue with my P880
fifali190 said:
sorry my friend can you explain it step by step from zero for a beginner?? I need help really!! please!!
Click to expand...
Click to collapse
Hi.
I did the same thing today. I installed that application " LG-Optimus-4XHD-Recovery-v1.1.apk "
I have selected ClockworkMod Custom Recovery.
It showed that Operation is successful.
than i clicked on "Boot Recovery" to restart my Phone in CloclworkMod Custom Recovery.
since then I am getting only Starting animation. (LG LOGO).
nothing happens.
My battery was full when i performed this procedure.
Please help me
Shrikantbhole90 said:
Hi.
I did the same thing today. I installed that application " LG-Optimus-4XHD-Recovery-v1.1.apk "
I have selected ClockworkMod Custom Recovery.
It showed that Operation is successful.
than i clicked on "Boot Recovery" to restart my Phone in CloclworkMod Custom Recovery.
since then I am getting only Starting animation. (LG LOGO).
nothing happens.
My battery was full when i performed this procedure.
Please help me.
Personal ID: [email protected]
contact : 9987575516 (Mumbai)
Click to expand...
Click to collapse
any help please,i have the same problem
Solution
Above post is mine.
I was stuck at LG Logo for 2 whole days.
You have to flash your phone.
I flashed my phone with same v20a (4.1.2 JB) firmware.
now its working absolutely fine.
Download LG Flash tool
Download Firmware.
pull battery out, Put it back in,
hold VOL- and Connect usb cable
then your phone will be in S\W mode.
then run Flash tool and select Firmware file,
and flash it.
your phone will restart automatically, then pull out cable and let it start on its own.
DONE.!
for LG Flash tool and Original V20A firmwares google and search.
as I am new member I am not allowed to post links or else i would have posted all the new links.
Its easy, all the best..!
so no hope for me?
can't flash KDZ, it just dosen't work, or freezes, or app stop responding and force-closes, when flashing by flashtool it errors after 17 sec...
any ideas?
LG service center
Hi again friends.Unfortunately I'm going to use lg service center and show phone to them:crying:.What should I say to them?Can I use warranty?Do they realise I rooted my phone and my warranty voided?And finally if warranty doesn't support it, how much it costs to repair?