I flashed I9000 and now I cannot boot to stock recovery to apply the update.zip. Any ideas? Holding voule up and down then holding power dies not work... just switches back and forth between the samsung and ATT boot logos.
you can find two apps in the market that will help. Terminal Emulator, intall, open, grant su permisions and then type su >enter< reboot recovery. Or another app even easier, Quick Boot only three options with this click on Recovery.
The recovery mode won't work unless you have the correct kernel anyway.
First get the one-click odin stock flasher then get into download mode by holding the down volume button, the home key, and then press power (so you're holding all at the same time). It should put you right into download mode.
Sent from my GT-I9000 using XDA App
I changed my splash screen using the herc.img method - The only downside I see to this is not being able to boot into recovery mode by pressing the volume down key and the power key at the same time - I can obviously boot into recovery mode via alternate methods - like if I am already powered up by using Quick Boot or if my phone is off, I can use adb reboot recovery and that works -
but I'm thinking more along the lines of if I need to get into recovery and I am not at home and can not get to a computer -
any other ways that work?
you can't get into the hboot screen?
You can access recovery by pressing POWER and holding the HOME button.
But if you can't access hboot/fastboot screen...that seems like a much bigger problem to me.
Should have nothing to do with the splash screen. I changed mine, and can access fast boot and recovery fine
Sent from my HERO200 using XDA App
Please disregard....I figured out what to do...
Sent from my HERO200 using XDA App
Here's my dilemma. I flashed CM7 RC4 to my n1 last night, now it is stuck in a loop of the boot animation and will not proceed any further. I'd boot into the bootloader, but my power button's been dead for a month, ADB won't recognize my phone to reboot-bootloader. Am I boned?
Pull the battery, connect your phone to a charger then hold the trackball while re-inserting the battery. Make take a few attempts, but it should eventually boot into fastboot. You could also hold volume down instead of the trackball if you just want hboot...
Sent from my Nexus One using XDA Premium App
Now i'm getting the battery indicator flashing green/orange. I can mess with it until I eventually get it charging solid. Is there any quick workaround for this?
Now I'm in fastboot. Is there a way to get into recovery without power button?
Is your bootloader unlocked?
Sent from my Nexus One using XDA Premium App
yes. indeed it is. If it helps, I have the latest CWM installed.
Place a copy of your recovery image in your sdk tools folder, connect via fastboot and type:
fastboot boot name-of-recovery.img
(use the real name of your recovery image)
Sent from my Nexus One using XDA Premium App
I knew that. I'm a tard. Thanks.
EVO stuck on boot load screen
danger-rat said:
Pull the battery, connect your phone to a charger then hold the trackball while re-inserting the battery. Make take a few attempts, but it should eventually boot into fastboot. You could also hold volume down instead of the trackball if you just want hboot...
Sent from my Nexus One using XDA Premium App
Click to expand...
Click to collapse
What steps should I take to force recovery mode if I have an EVO? I've tried holding volume up while power but it vibrates three times and does nothing. I'm stuck in the boot loader screen.
*-**EDIT
I was able to fix it doing a hard reset.
Turn the power off. If your HTC EVO 4G is frozen, pull the battery out and reinsert it
Hold the Volume Down button
Press and release the Power button
You are now presented with a menu that allows for Fastbook, Recovery, Clear Storage, and Simlock
Select Clear Storage by pressing the Volume Down button
Press and release the Power button
Now simply confirm your decision: Volume Up for YES and Volume Down for NO
Hi, I'm in the middle of rooting a Milestone for a friend and can't get past the part of the guide where the device is booted into recovery mode and the volume up and camera buttons are pressed as the volume up key on his handset is broken. Is there any way to get around this? Either a software method to get around the volume key being pressed, or a way to actually fix the keys?
Well if you get the phone into bootloader you can adb reboot into recovery hope it helps
Sent from my R800x using xda premium
ummmm
you can also download rom maneger and flash cwmr touch and use that
Hello ladies and gents,
I ahve a very simple question, i want to follow the CyanogenMod thread to change roms on my milestone because it is acting up on me and it def. needs a refresher, but my main problem is that my power button does not work anymore, and i'm afraid the only way i have for it to turn on is if i connect it to a computer...when i just connect the phoen to a wall it just shows me charging...but as soon as i connect it to a computer it officially turns on.
So, do i need my power button to be able to complete the rom change, AND, is there such a thing as a rom or an app that would allow me to turn the phone on with a different button????
Thanks for your help peeps it is greatly appreciated!!! :laugh:
Did u tried alt+shift+del button combination on phydical keyboard to reboot?
Sent from my Milestone using xda app-developers app
rolley said:
Hello ladies and gents,
I ahve a very simple question, i want to follow the CyanogenMod thread to change roms on my milestone because it is acting up on me and it def. needs a refresher, but my main problem is that my power button does not work anymore, and i'm afraid the only way i have for it to turn on is if i connect it to a computer...when i just connect the phoen to a wall it just shows me charging...but as soon as i connect it to a computer it officially turns on.
So, do i need my power button to be able to complete the rom change, AND, is there such a thing as a rom or an app that would allow me to turn the phone on with a different button????
Thanks for your help peeps it is greatly appreciated!!! :laugh:
Click to expand...
Click to collapse
Anyway: you can use the cable workaround to flash any rom, by pressing camera button while connecting to pc
Sent from my Milestone using xda app-developers app
scoutme said:
Anyway: you can use the cable workaround to flash any rom, by pressing camera button while connecting to pc
Sent from my Milestone using xda app-developers app
Click to expand...
Click to collapse
Maybe 'reboot recovery' through adb or terminal emulator.
nagabushan.c said:
Did u tried alt+shift+del button combination on phydical keyboard to reboot?
Sent from my Milestone using xda app-developers app
Click to expand...
Click to collapse
yes but no reaction!!
scoutme
Click to expand...
Click to collapse
are you saying that the camera button will work to turn it on while doing a ram flash? confused a little.
extrem0
Click to expand...
Click to collapse
what? lol
I think I misanderstood your problem... what do you need power button for while flashing?
Sent from my Milestone using xda app-developers app
scoutme said:
I think I misanderstood your problem... what do you need power button for while flashing?
Sent from my Milestone using xda app-developers app
Click to expand...
Click to collapse
Since my power button is broken, if ever it shuts down or needs to restart and doesn't automatically, i don't want to have to unplug it and/or temper with it...so basically well, that was exactly my question; will i ever need my power button while flashing/changing roms on the device?
If not then i will go ahead and do the rom change.
My 2nd question was, since my power button is broken, my screenlock/unlock is also unfunctional and if ever my phone shuts off i can't turn it back on unless i connect it to a computer. Is there such a thing as an app or a feature(from a specific rom) that would allow me to configure the phone to turn on with a different button? Same thing for the screenlock/unlock.
I hope i explained myself better
Thanks for your time!!
rolley said:
Since my power button is broken, if ever it shuts down or needs to restart and doesn't automatically, i don't want to have to unplug it and/or temper with it...so basically well, that was exactly my question; will i ever need my power button while flashing/changing roms on the device?
If not then i will go ahead and do the rom change.
My 2nd question was, since my power button is broken, my screenlock/unlock is also unfunctional and if ever my phone shuts off i can't turn it back on unless i connect it to a computer. Is there such a thing as an app or a feature(from a specific rom) that would allow me to configure the phone to turn on with a different button? Same thing for the screenlock/unlock.
I hope i explained myself better
Thanks for your time!!
Click to expand...
Click to collapse
Can't help you for the first question... Think it's impossible to boot without power button nor plugged USB.
But for the second, it's known that all CM (at least since 7) have this option : wake up with volume buttons
Some other ROM include it but can't tell you which one. Sorry.
What scoutme saying is correct, when the mobile is turning on and if u have pressed the camera button, it will trigger boot to recovery mode.
One more suggestion, why don't u use quick reboot widget, it has option to reboot to recovery. It does all what physical power button does. Try it out...
Sent from my Milestone using xda app-developers app
I've been dealing with this problem for about 6 months or so, if you are about to start from the scratch like sdcard partition and sbf and applying stuff I guess there's' no way you can do it...
All I did was downloaded the required ROM and placed in OR and I got a app for getting to recovery which is "Quick Boot"
Search on play store, its free ;which has got 4 options in it namely reboot, recovery ,boot loader and power off ...did it that way
Hope this helps
Sent from my Milestone using xda premium
To wake up the device (booted device, that has a locked screen) you can slide out the keyboard. CM7 indeed has a setting to wake it up with volume keys. For CM9 I do not remember and CM10 does not have that option yet as far I have noticed (I could be wrong, though).
What ROM do you currently have? Motorola stock? CyanogenMod? What version?
If you have non-moto it is rooted and has a busybox installed. You can execute
Code:
reboot recovery
form Terminal emulator which will take you to recovery. You can also connect it to computer, open Command prompt/Terminal (depends on your PC OS) and execute
Code:
adb shell
reboot recovery
Ccommand
Code:
adb reboot
to reboot the device or
Code:
adb reboot recovery
to reboot directly to recovery should also work. I'm unsure if it works on moto stock.
(Make sure you have enabled USB debugging in Settings.)
After that you should be directly in open recovery menu. Or press Volume up + Camera button if "stuck" on triangle screen.
Keyboard key combo, Left shift + Right alt + Delete reboots the device.
No matter what method you used to turn on the device you should be able to boot to recovery: while device is booting press and hold the keyboard X (needs to be done early in the process) to boot to recovery if you have bootloader 90.78. For previous bootloader vesions the camera button should do the same.
To boot to bootloader you need to press and hold D-pad up while the device is booting. Afaik, command
Code:
reboot bootloader
will boot to fastboot mode which is of no use for flashing sbf files (I can only assume that 3rd party apps and widgets use that method to get to bootloader/fastboot). You need bootloader mode to flash vunerable recovery, if not done already.
As minor side note, you have posted a help request in a Development section. Plus, all of this has been discused already. It is mostly scatterd around but not impossible to find.
---------- Post added at 01:39 PM ---------- Previous post was at 12:52 PM ----------
@rolley: just out of curiosity - what is so "LOL" with what extrem0 said (http://forum.xda-developers.com/showpost.php?p=30317231&postcount=4)?
@Mrvek you are awesome.. so much of patience....
Sent from my Milestone using xda app-developers app
I get into recovery by plugging it in anywhere, PC or wall, then hold X while its booting, once the recovery screen shows up, unplug, let go, and press whatever buttons you need. If its not X that you have to press, press whatever you need to when its booting.
rolley said:
Hello ladies and gents,
I ahve a very simple question, i want to follow the CyanogenMod thread to change roms on my milestone because it is acting up on me and it def. needs a refresher, but my main problem is that my power button does not work anymore, and i'm afraid the only way i have for it to turn on is if i connect it to a computer...when i just connect the phoen to a wall it just shows me charging...but as soon as i connect it to a computer it officially turns on.
So, do i need my power button to be able to complete the rom change, AND, is there such a thing as a rom or an app that would allow me to turn the phone on with a different button????
Thanks for your help peeps it is greatly appreciated!!! :laugh:
Click to expand...
Click to collapse
For your question 1, please install this in your phone: http://www.mediafire.com/?wvw2sde2eldw2x4
there will be two icons in your phone afer installed, one for power off (can reboot into Recovery)
,another one is screen off.
For the second, all CM6(cm7 not sure) have this option : wake up with volume buttons (setting>cm setting>input setting>volume rocker wake)
By the way, if the PowerLock.apk doesn't switch you to recovery, you may need to copy this to your phone:
http://www.mediafire.com/?kvq45p4nscjwf88
How to use 60autoboot_or :
1) copy it to your system floder first
2) change permissions as:
VVV
VXV
XXX
3) then move it to system/etc/init.d
4) REBOOT
mrvek said:
To wake up the device (booted device, that has a locked screen) you can slide out the keyboard. CM7 indeed has a setting to wake it up with volume keys. For CM9 I do not remember and CM10 does not have that option yet as far I have noticed (I could be wrong, though).
What ROM do you currently have? Motorola stock? CyanogenMod? What version?
If you have non-moto it is rooted and has a busybox installed. You can execute
Code:
reboot recovery
form Terminal emulator which will take you to recovery. You can also connect it to computer, open Command prompt/Terminal (depends on your PC OS) and execute
Code:
adb shell
reboot recovery
Ccommand
Code:
adb reboot
to reboot the device or
Code:
adb reboot recovery
to reboot directly to recovery should also work. I'm unsure if it works on moto stock.
(Make sure you have enabled USB debugging in Settings.)
After that you should be directly in open recovery menu. Or press Volume up + Camera button if "stuck" on triangle screen.
Keyboard key combo, Left shift + Right alt + Delete reboots the device.
No matter what method you used to turn on the device you should be able to boot to recovery: while device is booting press and hold the keyboard X (needs to be done early in the process) to boot to recovery if you have bootloader 90.78. For previous bootloader vesions the camera button should do the same.
To boot to bootloader you need to press and hold D-pad up while the device is booting. Afaik, command
Code:
reboot bootloader
will boot to fastboot mode which is of no use for flashing sbf files (I can only assume that 3rd party apps and widgets use that method to get to bootloader/fastboot). You need bootloader mode to flash vunerable recovery, if not done already.
As minor side note, you have posted a help request in a Development section. Plus, all of this has been discused already. It is mostly scatterd around but not impossible to find.
---------- Post added at 01:39 PM ---------- Previous post was at 12:52 PM ----------
@rolley: just out of curiosity - what is so "LOL" with what extrem0 said (http://forum.xda-developers.com/showpost.php?p=30317231&postcount=4)?
Click to expand...
Click to collapse
My milestone is still on custom rom, which is why i wanted to change it!
i'm trying to follow the guides on how to do it but holy sh*t do i feel like a noob. i used to customize the **** of my old windows phone and i've been out of the cellphone game in a while so im confused as ****.
Nonetheless, you clarified some good points, i thank you a million times for your time and patience; i'm gonna go ahead and try to install CM mod on here and hope it resolves all of my problems lol (gl to me ...)
oh and the reason why i ''lol'ed'' is beacuse all the terms he used in his post i was unfarmiliar with, so it was foreign language and i was confused as **** lol