Related
So simply I just seem not to grasp or figure out how to get Cog 2.2 on my Froyo leak...
I have to root to use RomManager and Clockwork Recovery...I don't know if TheBeast Root will work, I know OCLF won't allow me to try...
I just don't want to flash back to stock if I try the beast update zip and do everything over...
Anyone help with steps from leaked froyo to Cog 2.2? I have looked at their site, and Wiki for step by step...I am just dumb as hell I guess...
Thank you
Use the One click odin method,
I897UCJF6 - Odin3 One-Click Downloader:
http://forum.xda-developers.com/showthread.php?t=731989 (
I am sorry. I guess I was not clear. I did falsh to stock, now I am flashed to the Froyo leak. Wondering how to get Cog 2.2 beta on froyo. I really want lag fix for it.
If I was in your situation I would flash back to stock 2.1 with odin and then root and install clockwork and then flash 2.2BETAx
Here is how you do it.
Grab the Odin that flashes you back to STOCK firmware.
Flash it back to stock.
Download RyanZA's program and root the phone.
Install Clockwork.
Put the Cognition Zip on the SD card, and select it from Rom Manager/Clockwork.
Flash the phone.
Once you have Cognition 2.2 installed, then you can use the EXT2 lagfix in RyanZA's program.
Thank you SeriousBizznass
I have everything I need.
any body having problems with not been able to get back in to clockwork..?
i've done the steps multiple times even master cleared and started stock stock..but once im back at THE AWESOME rom from cognition 2.2 beta3 but when i reboot it said bad signature or something like that in red .....
I can't get 1.7 nor 2.2 to install properly....awesome.
1. you cannot go from 2.2 to another 2.2 without going to stock first (you at least need the kernel, so its easiest just to odin one click it). clockworkmod/rom manager DOES NOT WORK with 2.2. that is just the way it is for now.
2. it is always good to copy everything from your sdcard over to your computer for a backup and do a master clear or reset to factory format.
3. root it. there are one click methods, there are update.zip methods, and as mentioned you can just dl ryanZA's OCLF (DO NOT RUN THE SCRIPT TO ADD THE LAGFIX, as it will all be overwritten anyway, dont waste your time)
4. install ROM MANAGER, open it, and click on FLASH CLOCKWORK RECOVERY. select captivate
5. put cog.zip file on sdcard (NOT THE EXTERNAL SDCARD, the 13gb one that shows up on your PC)
6. reboot into recovery mode (use adb reboot download, or an app called quickboot, or use the rom manager and click on REBOOT RECOVERY MODE)
7. if green clockwork screen does not come up right away, and you are on a blue text screen, click on reinstall packages, it should boot into clockwork (sometimes this takes a second 'reinstall packages')
8. once in clockwork recovery, select install zip from sdcard, point it to your cog.zip file and bam!
9. profit
Omg...Pirateghost...THANK YOU! Right now it is installing Cog 2.2 beta...THANK YOU!!!
It worked, now I am running Cog 2.2 Beta! SWEET!
Thanks again pirateghost!
I just followed the guide for the current Cognition 2.2 Beta and it seemed to go successful. The Cognition wallpaper is there and everything, but I keep getting this error..and no cell signal.....I also noticed that when I go into reinstall packages and to choose the Cog zip, there are other old applicaition folders/files listed in there along with it. I did do a ODIN restore to factory...shouldnt these be gone and back to stock?
the process com.android.phone has stopped unexpectedly
Can anybody help?
Tenacious--M said:
I just followed the guide for the current Cognition 2.2 Beta and it seemed to go successful. The Cognition wallpaper is there and everything, but I keep getting this error..and no cell signal.....I also noticed that when I go into reinstall packages and to choose the Cog zip, there are other old applicaition folders/files listed in there along with it. I did do a ODIN restore to factory...shouldnt these be gone and back to stock?
the process com.android.phone has stopped unexpectedly
Can anybody help?
Click to expand...
Click to collapse
No Odin will not wipe everything. You need to Master Clear to get rid of anything left over from previous flashes. You need to do a factory reset and you should have signal, remove your SIM before resetting, just to be safe, backup any files you want to keep onto your pc because factory reset will wipe everything and you can't get it back. Power your phone on after you remove your SIM card and do the factory reset. If that dosen't work you may need to flash a modem to get back signal. Which version of Cognition are you running?
Hi,
I really need some help as I began to get crazy about this.
I also have to mention it's my first time into Root/Mod/Custom/etc...
I Have a GT-I9000M (BELL) with Android 2.2 (version FROYO.UGJK4) Kernel 2.6.32.9
I successfully Rooted the phone with Superoneclic (Have Super User app in menu)
I Installed Rom Manager 3.0.0.0 Then authorized sudo when prompted to do it.
After that in the recovery menu of Rom Manager i've downloaded the Clockworkmod thing. (2.5.1.2)
I've tried to boot into clockworkmod but I got the standard Recovery Boot from Samsung instead. (tried to re-install rom manager to see if work but no)
I also tried to install it by using the update.zip version got here http://www.multiupload.com/5CUIK88JM0 and put it at the root of the internal sd.
Booted into the Samsung Recovery Boot and press apply Update.zip then i got
the following error:
E:failed to verify whole-file signature
E:signature verification failed
Installation aborded
(Tried Twice still nothing new)
The goal of all this is to install Darkys_v6.0_Gingerbread_Edition_Voodoo_signed seen here: http://forum.xda-developers.com/showthread.php?t=814091
What do I do wrong???? Help me please i'm tired of the Android Froyo version from Samsung+Bell
To get ClockWorkMod compatibility, you need to use ROM Manager to start them.
This way, Voodoo recognize it's CWM recovery, intercept the call to the update.zip and install Ext4 wrappers.
If the new version is not yet available in ROM, be patient
I found the recovery app doesn't work very well. I suggest installing a kernel with CWM , that's compatible with Bell hardware? via Odin and you're good to go. From recovery menu you can do anything, including a full backup.
Supercurio I Need Help
MOD EDIT: Teranox, our forum rules specifically state that non-engish posts are allowed only if an english translation is provided as well. Please add that here, or the post will be removed
supercurio this one is for you:
What is voodoo
i'm using Rom Manager but notjing seems to work. even OCLF
it's like even if i'm rooted i can't do anything....
can't use lagfix
can't use le clockworkmod
can't use le rom de darky....
you seem enough advance in android to answer me (I saw you post & video on the Nexus S ported to SGS)
Thank you to answer me
You must be in 2e recovery for CWM
Sent from my GT-I9000 using XDA App
jsen said:
You must be in 2e recovery for CWM
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
How to get from 3 to 2e? I'm on JPO 2.2. Thanks
It is not the first time i heard about 2e recovery and cwm
thing is: i'm new to all of this. Can someone explain me what those 2 things mean and do?
Do you mean that i have everything to do it right but there is something i do wrong or forgot?
mirzahodzic said:
How to get from 3 to 2e? I'm on JPO 2.2. Thanks
Click to expand...
Click to collapse
You can find the thread called 'CFroot' at the android development section.
Download the correct version based on your current firmware and follow the instructions there. When you are done, your recovery would be 2e.
Sent from my GT-I9000 using XDA App
My only concern after had read cf-root post is that none of the zip package offer somethong for ugjk4
Teranox said:
My only concern after had read cf-root post is that none of the zip package offer somethong for ugjk4
Click to expand...
Click to collapse
Sorry dude, the only solution would be to flash to an Eclair ROM (which by default has a 2e recovery) or flash Froyo which is supported by CFroot.
I have the same issue as well. Wanted to try Darky's v6.0 rom, however stucked in getting to CWM since I'm on 3e. I did look at CFRoot, but nothing stated for JK4.
Teranox said:
Hi,
I really need some help as I began to get crazy about this.
I also have to mention it's my first time into Root/Mod/Custom/etc...
I Have a GT-I9000M (BELL) with Android 2.2 (version FROYO.UGJK4) Kernel 2.6.32.9
I successfully Rooted the phone with Superoneclic (Have Super User app in menu)
I Installed Rom Manager 3.0.0.0 Then authorized sudo when prompted to do it.
After that in the recovery menu of Rom Manager i've downloaded the Clockworkmod thing. (2.5.1.2)
I've tried to boot into clockworkmod but I got the standard Recovery Boot from Samsung instead. (tried to re-install rom manager to see if work but no)
I also tried to install it by using the update.zip version got here http://www.multiupload.com/5CUIK88JM0 and put it at the root of the internal sd.
Booted into the Samsung Recovery Boot and press apply Update.zip then i got
the following error:
E:failed to verify whole-file signature
E:signature verification failed
Installation aborded
(Tried Twice still nothing new)
The goal of all this is to install Darkys_v6.0_Gingerbread_Edition_Voodoo_signed seen here: http://forum.xda-developers.com/showthread.php?t=814091
What do I do wrong???? Help me please i'm tired of the Android Froyo version from Samsung+Bell
Click to expand...
Click to collapse
This Might Work.... Although I Have A Different Phone (Cdma Hero), But Had A Similar Issue....
The Way I Was Able To Correct My Problem Was To Re-Install A Older Version Of "Rom Manager" (Let Me Know If You Have or Need A Older Version, I Keep'em All Now!! Lol!!
Also In "Rom Manager" I Would Try To Flash Alternate Recovery, And Then Clockwork Recovery Right After!! Make Sure It Says *Current Recovery* -And- *Latest Recovery* (Up At The Top) Then Try To Boot Into Recovery!!
PM Me If You Need More Help!!
Sent from my HERO200 using XDA App
Fresh Start
Ok well I got a good night of sleep so i'll resume where I am
I learned yesterday the following:
CMW: Clockworkmod
OCLF: One Clic Lag Fix
Now what I could try is to get back to Original Firmware of the GT-I9000M (Eclair) and from then what I've understood is that I don't need 2e recovery? Am I right?
From then I could install Darky without anything.
By going back this way will i'll stay root of will I have to root again?
If all this is right, how do i go back to eclair? can it be done via the 3e recovery menu or I have to flash? Is so I don't know anything about odin and the way it work so i'll need your help loll
rafi92 said:
Sorry dude, the only solution would be to flash to an Eclair ROM (which by default has a 2e recovery) or flash Froyo which is supported by CFroot.
Click to expand...
Click to collapse
here's what I did now:
Used Odin and Flashed my firmware to the previous one (2.1 Eclair.UGJH2)
Re-rooted
Re-installed Rom Manager
When in recovery mode i see 2e but it's the recovery from Samsung. Can't see the CWM......
Think i'm pretty close compared to yesterday from Darky 6.0 but STILL NEED CMW lolll
Fist timer Root and Flash never easy lolll
OK GUYS GOOD NEWS!!!!
Don't know what I did but CWM WORK NOW!!!!
What i've read somewhere is to never open the zip files (what i did). Got the idea of flushing them and download it again. This time it worked.
Gonna let you know when running Darky
----!!!!WORKING!!!!----
I Have Darky 6.0 Running on my Bell GT-I9000M!!!!!
First I want to thanx everyone of you who helped me out! You've been a great help.
Also I want to get the summary of my actions so Others could take advantage of this thread.
-Froyo version FROYO.UGJK4 (that is the official GT-I9000M update from BELL Mobility) was painfull to do anything so I downgraded to the eclair.UGJH2 (that is the Original Firmware from Bell)
First I've Rooted my phone using Superoneclic 1.5.5.0 that you can find here:
http://forum.xda-developers.com/showthread.php?t=803682 (enable debuging mode on the phone in Settings-applications-developpement-debuging) then plug the phone and on superoneclic press ROOT...wait and follow indications
Then went to ODIN 1.7 that you can find here
http://www.general-search.com/fileinfo/20192867
You can find the BELL 2.1 firmware
here http://www.multiupload.com/ZNBT2RY5Y0 Password is samsung-firmwares.com
In odin i've used the 512.pit file (place it in the Pit section)
Then placed the 2.1 Firmware in the PDA section.
Took care Repartition, auto-reboot, F.Reset Time check box was check.
Booted in download mode (to get it right with odin i've booted in recovery first: Vol Up+Home+Power when bootscreen appear released it. After Pressed on Reboot now and immediatly pressed Vol DOWN+HOME+Power) I GOT THE BIG YELLOW LOGO OF ANDROID and in ODIN i got the Yellow icon appeared.
At this moment I've pressed START in odin and waited. The phone was acting like when updating through Kies.
When finished I was on ECLAIR
After, I've Re-Rooted the phone with superoneclic again.
Installed Rom Manager
Downloaded the CMW (CLockworkmod) that you can find here:
http://www.multiupload.com/5CUIK88JM0 (DON'T OPEN THIS ZIP BECAUSE IT WILL BREAK THE SIGNATURE NEEDED TO VALIDATE THE FILE)
I've placed the update.zip file (CMW) at the root of the internal SD Card of the phone and rebooted into recovery mode. I went on the apply update.zip (first time it was not working, then second time it worked)
At this moment I was on Android 2.1, Rooted, and CWM Recovery was working.
To Install the Darky's v6.0 Gingerbread Edition, I've downloaded it here:
http://www.multiupload.com/YPQVS4WO9C (ONCE AGAIN DON'T OPEN THE ZIP)
I've placed it at the root of the phone (same place than update.zip)
Opened Rom Manager, and selected Install a Rom from SD Card.
I've selected the zip File and applied it.
Phone went into recovery mode by itself then started installing Darky. (took like 5 minutes but it is said to be between 5-10 minutes so...)
HURRAY I'M ON DARKY CUSTOM ROM!!!!
PS: (at boot screen GT-I9000M will change to GT-I9000), Boot Screen Animation will also change for the Nexus One Boot animation.
Took me a day and half from Noob to This but hope other Bell user (or SGS user) will find their solution here.
Now let me alone I have to play with my new toy lolll
Just got back home. I will follow your footsteps. Do you have 850 mhz band ?
You with Bell ? Any problem making and receiving calls using Darky's rom ?
Followed your steps. Now I'm running Darky's v6.0 rom.
Even if it's a Bell phone, i'm using it on rogers.
I don't have any band problems(yes i have the 850 band). In fact, since i'm on Darky it look like if the wifi and phone antenna is far better. I got reception in places i wasn't before...and can even say GPS lock my position accuratly in less than 10 sec
Everything is.better since darky run on my phone
Sent from my GT-I9000 using XDA App
Hey, can you please clarify the ODIN steps? I have the exact same problem seen here.
I've completed up until where you put the phone in download mode. I set up ODIN as described, then connected my phone via USB, then enetered Download mode - but I only get a yellow icon on the phone, not in ODIN. Have I gone wrong somewhere?
Hi,
I just wanted to update manually to Gingerbread.
But I am truly confused with all the version jibber jabber...
My Android version is 2.2.1, Build Number FRG83D and Kernel is 2.6.32.9-g6624e39 [email protected] #1.
My phone is from german Vodafone Company. Maybe it is because of the language? But I do not care about it, use only English anyhow.
Can I update?
Obviously I can not with the just released file, cause I get a "cannot verify".
Or do I have to wait for another file and why?
Thanks!
Do you have Vodafone or Stock Google Android installed? This update works not on the vodafone version.....
You're not even on the latest version of Froyo, of course you won't be able to use the Gingerbread update.
Update to FRG83G with the last link in this post: http://forum.xda-developers.com/showpost.php?p=11618364&postcount=947
Direct link to FRG83G (from D) http://android.clients.google.com/p...igned-passion-FRG83G-from-FRG83D.2854b06b.zip
How do I switch to the lates stock version that I can update Gingerbread to?
I thought I updated manually to the latest version before...
I really hate this part of Android
edit: oh thanks to the above, guess I'll try that
Brownbay said:
Update to FRG83G with the last link in this post: http://forum.xda-developers.com/showpost.php?p=11618364&postcount=947
Direct link to FRG83G (from D) http://android.clients.google.com/p...igned-passion-FRG83G-from-FRG83D.2854b06b.zip
Click to expand...
Click to collapse
This fails to verify too
Can anyone lead me to a way to get to vanilla Android so I wont be bothered with this **** again?
DarsVaeda said:
Can anyone lead me to a way to get to vanilla Android so I wont be bothered with this **** again?
Click to expand...
Click to collapse
it seems to me that you are not on the stock android ROM, but you are on a special vodaphone version of the ROM. if this is true, i highly suggest that you get rid of that ROM. that means you should root your phone, gain superuser acces, and install ROM manager.
ROM manager will now let you easily flash a variety of ROMs, just like an official OTA update, and including the stock ROM. so from ROM manager you could switch to stock if you wish, which would let you upgrade to gingerbread. or you can switch to cyanogen, or any other ROM you see in the list.
by far its the best thing to do.
Okay this are the steps I figured so far, if I follow them will I be able to update to Gingerbread?
Any step I forgot?
- Root with this method http://forum.xda-developers.com/showthread.php?t=959672 (yeah I'm on ubuntu)
- then I "download the FRG83 system image from http://developer.htc.com and use fastboot to flash over the system and boot images"
- then I run the update the Gingerbread update
DarsVaeda said:
Okay this are the steps I figured so far, if I follow them will I be able to update to Gingerbread?
Any step I forgot?
- Root with this method http://forum.xda-developers.com/showthread.php?t=959672 (yeah I'm on ubuntu)
- then I "download the FRG83 system image from http://developer.htc.com and use fastboot to flash over the system and boot images"
- then I run the update the Gingerbread update
Click to expand...
Click to collapse
That is what I had to do to get mine working...
So you may help me out cause i'm stuck again.
I have rooted via SuperOneClick now, cause the linux one did not work, blame it on eclipse...anyway.
I installed RomManager as suggested above, but there is no FRG83 to choose from.
So i downloaded the FRG83 from HTC and choose that with RomManager. But it does not install, just backups then reboots and nothing changed.
I also tried to do it manually but if i go to fastboot i can not do anything.
There are only Bootloader, Reboot, Reboot Bootloader and Power Down.
I named the downloaded zip (http://dl4.htc.com/RomCode/Source_and_Binaries/signed-passion-img-FRG83_0923.zip), root.zip and placed it in the root of the sd-card.
What am i missing?
DarsVaeda said:
So you may help me out cause i'm stuck again.
I have rooted via SuperOneClick now, cause the linux one did not work, blame it on eclipse...anyway.
I installed RomManager as suggested above, but there is no FRG83 to choose from.
So i downloaded the FRG83 from HTC and choose that with RomManager. But it does not install, just backups then reboots and nothing changed.
I also tried to do it manually but if i go to fastboot i can not do anything.
There are only Bootloader, Reboot, Reboot Bootloader and Power Down.
I named the downloaded zip (http://dl4.htc.com/RomCode/Source_and_Binaries/signed-passion-img-FRG83_0923.zip), root.zip and placed it in the root of the sd-card.
What am i missing?
Click to expand...
Click to collapse
I downgraded to stock from my laptop.
You go into fastboot on the device and then on your computer run commands like:
Code:
fastboot flash boot boot.img
and
Code:
fastboot flash system system.img
.
Fastboot in this case is used to restore the stock images from your computer to the device.
You then need to re-apply all the updates.
Just flash the full stock Gingerbread ROM from the dev section. Easy peasy.
http://forum.xda-developers.com/showthread.php?t=968396
Hi all,
I have exactly the same problem as DarsVaeda, and also the same specs:
Nexus One (Vodafone NL)
Android version 2.2.1
Build Number FRG83D
Kernel version 2.6.32.9-g6624e39 [email protected] #1
HBOOT-0.35.0017
RADIO 5.12.00.08
I've been trying to find a solution for the problem but trying to update to FRG83G gives me the same error message:
Finding update package…
Opening update package…
Verifying update package…
E:failed to verify whole-file signature
E:signature verification failed
installation aborted
if someone has a solution, please post it here
I believe Vodafone tweak their ROMs, so you can't install the update. You will need to revert your phone to complete stock, or root and flash files through a custom recovery, our unlock the bootloader and fastboot flash...
Sent from my Nexus One using XDA App
Yep he's right.
I am on gingerbread now.
I rooted with super one click.
Then installed rom manager.
Flash a custom recovery (ie. at the bottom).
Downloaded stock FRG83G from HTC.
Booted into the recovery and installed the rom.
Afterwards I could update to gingerbread.
No downsides yet.
You can also flash the stock gingerbread rom now. Saves you one step.
It's linked here in the forum.
Sent from my Nexus One using XDA App
So there is no way around it? if I want Gingerbread on my Nexus I have to root it or wait for Vodafone.
I'm unsure about rooting, never done it before and I'm a noob in this field, but I really, really want the update
If you don't mind, DarsVaeda, and in the light of your success with that method, could you maybe post an even more detailed step by step instructions of how you did it?
Sure.
First of all I lost all data that was not saved remotely. Like SMS or application data from applications that do not remotely store data. Keep that in mind! But it's worth it.
I backup SMS to my google account anyway and delete them after some time from my phone, so I was fine with that.
As far as I know now you do not void your warranty if you root with "SuperOneClick". The root will also be gone after you flashed the rom. On my phone there is only a program called "superuser" left, but it's not usable since the phone is not rooted anymore.
Step by step:
before get all of this:
- get and install the USB Android drivers on your WindowsOS explained here (and download): http://developer.android.com/sdk/win-usb.html
- install "RomManager" from the market on your phone
- get "SuperOneClick" here: http://forum.xda-developers.com/showthread.php?t=803682
- get the Gingerbread Stock ROM: http://forum.xda-developers.com/showthread.php?t=968396
- rename the stock rom to "root.zip" and place it on the SD-Card, top level
1. on your phone goto Settings -> Applications -> Development -> check "USB debugging"
2. connect phone with USB to your Windows machine (drivers above should be installed and Windows should recognize the phone)
3. fire up SuperOneClick and click "root", wait until it tells you it wants to run a test
3a. if it fails to root the first time, just hit root again (I had to do it, after second try it worked)
4. restart the phone after it is rooted
5. back in Android start RomManager
6. in RomManager flash a custom recovery, I took the one at the bottom (something with alternative recovery, second last entry)
6a. it might want you to install additional software, allow it
6b. it will ask you for rights, allow them
7. after the flash is finished boot into the recovery (second entry from top of rommanager)
8. in the custom recovery navigate to the point where you can apply an update with a zip file (in the one i took it was the second entry I guess)
9. after you choose the entry you can choose the zip, choose the "root.zip" and apply
10. now the installation should start with verifying and then actually applying the rom
11. restart the phone
11a. if you are now stuck in the start animation (the one with that floating x-thing) and it does not go on you have to reset all you data (factory reset)
11b. power off the phone and start it with pressing the power button and volume down
11c. a screen appears, navigate to "recovery" and hit the power button (you have to wait till it loads something, then you can press that)
11d. in the new screen there should be an option called factory reset, if not it is like "wipe all data" -> that's when you loose all your data (I had to do it)
11e. reboot the phone
12. Gingerbread should boot now
Feel free to ask any questions if you have. Hopefully I can help.
I did not use the stock rom directly, guess that saves you one step.
If it does not work, but I guess so you have to do the same as above but install this rom first:
http://dl4.htc.com/RomCode/Source_and_Binaries/signed-passion-img-FRG83_0923.zip
After you installed it boot the phone and check if the version is correct: Settings -> about phone.
If so get the Gingerbread update (http://android.clients.google.com/p...signed-passion-GRI40-from-FRG83G.81304b2d.zip) and place it on the SD-card as "update.zip".
Boot to the recovery, same steps as the factory reset. There will be an option "apply update.zip". Use that and after it you will also have Gingerbread.
Wow! thank you so much for the step by step guide, I really appreciate it now I feel more confident to attempt the feat of updating.
You don't need to root to update.
Follow the wiki guide to unroot/restore using the passimg method for FRG33, then install the updates to FRG83, 83D, 83G, then finally Gingerbread...
Sent from my Nexus One using XDA App
Use At Your Own Risk!!!
Hey all. I hope my experience trying to get ROM Manager and CWM working under AT&T's official FROYO 2.2 update will keep someone from throwing their Captivate against the wall.
Here is the sequence I used. I admit it is kinda convoluted, but it did finally work and I can get to the CWM boot menu. This assumes you follow the instructions associated with each individual step.
1. Blast the phone back to 2.1 with [STOCK ROM] Odin3 One-Click Downloader and Drivers CAPTIVATE ONLY
2. Run the Kies Mini update from Samsung/AT&T to get the Official FROYO build.
3. Only run Shell Root with [APP]SuperOneClick v1.7 (Root, Unroot, Enable Non-Market App)
4. Run the recovery 3e modified to work like recovery 2e - Updated 01/23/2011
(You know this worked if when you boot to Recovery mode you see a line that says, checksum confirmation need_checksum[0], shows up.)
5. Reboot!!!
6. Run the SuperOneClick v1.7 and choose Root then Enable Non-Market Apps. Use the psneuter radio button.
7. Reboot!!!
8. Delete any update.zip on the internal SD.
9. Go to the Market and install ROM Manager.
10. Run ROM Manager, let it d/l and install CWM. It should ask for SU permissions. If it doesn't you probably forgot to reboot.
11. Use ROM Manager to Reboot into Recovery.
12. Choose reinstall packages from the BLUE recovery menu. You will have to do this TWICE and then the GREEN CWM Recovery menu should appear.
Now you can use ROM Manager/CWM to do full backups which was the reason why I wanted to get it to work as I'm still leary about how well Titanium Backup works and coming from the IT world I love imaging.
UPDATE
OK I just installed [KERNEL] stock+Voodoo stable 5.x for Captivate and it worked fine. Bobapunk's steps should work fine but I haven't followed his steps.
UPDATE 2
Well it seemed to work fine, but it gave errors reading cache files and I could no longer install apps off the Market. Doing a Master Clear atm and will try Boba's order.
UPDATE 3
Seems to have been an error with partitioning. Back to 2.1, Kies to 2.2, Odin3 1.81 to PDA the Kernel, then repartition and format ALL partitions (had to do this to format BOOT). Then back to 2.1, Kies to 2.2, OneClick to root, Odin3 1.81 to PDA kernel. Now I can have fun getting rid of the bloatware and I might install plumbBob's GPS fix.
UPDATE 4
Everything is working fine now. Did [FIX] PlumbBob GPS Fix 1.0 [UPDATE 3/10/2011] and the GPS locks on in about 5 seconds in LBSTestMode, but Google Maps/Navigation still seems to lose lock often. Using Captivate SGS Tools and recommend it highly.
UPDATE 5
Works beautifully except for Messaging does an FC on boot. Doesn't seem to matter and I'm not a big texter and it does work afterward. One of the system apps I uninstalled with TB must be tied in to it. Not sure which one and my week at home is up. Disable media scanning in SGS Tools doesn't work, but Rescan Media ROOT (search the Market) does.
As Always Use At Your Own Risk!!!
I am glad that you got this figured out. I accomplished this a little differently.
I had AT&T 2.1 rooted
I upgraded to 2.2 via Kies
I rooted with Super One Click
I flashed Supercurio's Kb1+ Voodoo Kernel
I flashed CWM Recovery with ROM Manager
This worked fine on my 1009 build captivare. It seems simpler than your process and you get Voodoo along with CWM Recovery.
Well I'm trying to keep it as stock as possible. Next step will be to use TB to get rid of the AT&T bloatware. I haven't decided if I will use the Voodoo lagfix or not as it makes a radical filesystem change and some posts have warned about flashing new ROMS to it's FS and ending up with expensive paperweights.
BTW didn't you have to go back to the stock (i.e. unrooted) ROM to get Kies to perform the update?
bobapunk said:
I am glad that you got this figured out. I accomplished this a little differently.
I had AT&T 2.1 rooted
I upgraded to 2.2 via Kies
I rooted with Super One Click
I flashed Supercurio's Kb1+ Voodoo Kernel
I flashed CWM Recovery with ROM Manager
This worked fine on my 1009 build captivare. It seems simpler than your process and you get Voodoo along with CWM Recovery.
Click to expand...
Click to collapse
I used Kies mini to upgrade to 2.2, then rooted, installed Rom Manager, and Titanium Backup, TB works well, but Rom Manager wont reboot in recovery and go to green...always stays in blue...error messages when I reinstall pkgs..so...reading your fix, if I was to be able to flash Supercurio Kb1+ Voodoo Kernel, should I be able to get to the green in Rom Manager?...what is CWM Recovery?...and what about that update file in my sd...delete?..or keep it?
Thanks in advance for any help....been 6 weeks now and cant get the green to happen in Rom Manager...so other than Tit. Bac. nothing else works...where to get the Supercurio Kb1?....and how to flash CWM?...thanks...any steps to install supercurio would be appreciated...thanks..
Studio52
Does this will work on my samsung mini gt s5570,i have root and custom rom
Thanks in advance
My brother rooted his Captivate 6 months ago or more. He kept the stock ROM, and now would like to try a custom ROM. Unfortunately, he doesn't remember much about what he did. He said he downloaded a program, plugged in his phone, and it rooted him.
I assumed that I should be able to boot into recovery and flash a ROM from there. I looked up how to boot into recovery, and tried the 'hold down vol/up and power on' approach. Instead of a recovery menu, it goes directly to some kind of update screen with this text:
movi-check start..!!
... <lines removed>
install default apk files please wait
I've searched for these lines, and cannot find why this is coming up. I did find that this should have ended with a message that the install finished, but after leaving it for 10 minutes, it seemed to just reboot. Perhaps the message did come up, and then it immediately rebooted.
Does anyone know why the phone is in this state where there is no recovery menu? If I install ROM Manager and flash ClockworkMod is that likely to work and not cause harm?
Need a little more info... is it stock 2.1 or 2.2? If it's Froyo 2.2 then the stock recovery is tricky to get around if you're new to flashing or modding.
jack man said:
Need a little more info... is it stock 2.1 or 2.2? If it's Froyo 2.2 then the stock recovery is tricky to get around if you're new to flashing or modding.
Click to expand...
Click to collapse
Thanks. It is stock 2.2.
I am not new to flashing, and I'm comfortable with adb and other tools. I'm just not familiar with the Samsung Captivate.
Is the screen that comes up with 'movi_check' the stock recovery? it appears to be automatically trying to update something.
Probably just be easier to use Odin to flash stock 2.1 and root and get recovery on it. Then you can flash any (2.2) ROM you want on it, or you could use Odin or Heimdall to flash Gingerbread onto it (recommended). There are tutorials all in the development section.
Sent from my SGH-I897 using XDA App
Reamer09 said:
Probably just be easier to use Odin to flash stock 2.1 and root and get recovery on it. Then you can flash any (2.2) ROM you want on it, or you could use Odin or Heimdall to flash Gingerbread onto it (recommended). There are tutorials all in the development section.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
If its a newer build it wont like 2.1 (alot of newer builds bootloop with 2.1). If your captivate is one of the newer builds and has the 3e recovery here is a guide to get past it.
As to flashing Gb you will need GB bootloaders wich carries risk. Please READ on how too and risk that may happen. Its a small risk but you can hard brick the phone if you mess up bootloaders or if the booloader fails to flash.
Another option is flashing KB1 2.2 froyo and using Desing Gear's Cog 4.x.x kernel. You will have clock work mod. There's a ton of ways to do it most of wich are in the forums already so search and if you have doubts ask
prbassplayer said:
If its a newer build it wont like 2.1 (alot of newer builds bootloop with 2.1). If your captivate is one of the newer builds and has the 3e recovery here is a guide to get past it.
As to flashing Gb you will need GB bootloaders wich carries risk. Please READ on how too and risk that may happen. Its a small risk but you can hard brick the phone if you mess up bootloaders or if the booloader fails to flash.
Another option is flashing KB1 2.2 froyo and using Desing Gear's Cog 4.x.x kernel. You will have clock work mod. There's a ton of ways to do it most of wich are in the forums already so search and if you have doubts ask
Click to expand...
Click to collapse
It crossed my mind that newer builds wouldn't like 2.1, but I wasn't 100%, that's why I recommended going to GB. Just reading the instructions a few times and being prepared the risk is very low to hard brick. Just make sure to know exactly what you're doing when you choose which files for the primary and secondary boot loaders.
But said person is asking info on something as simple as rooting, Hence there are easier less evasive ways to get past 3e.
prbassplayer said:
But said person is asking info on something as simple as rooting, Hence there are easier less evasive ways to get past 3e.
Click to expand...
Click to collapse
Just to clarify, I'm not asking about rooting, but about flashing and the recovery console. I'm an EVO user, and I just don't know the idiosyncrasies of the Captivate.
Am I correct that the messages I get when trying to go to recovery (starting with movi_check start) are normal, and that after those messages I should get the recovery console? If so, it seems to be stuck on the "install default apk files please wait" step, as this doesn't seem to complete.
I do see the steps on how to flash, and can follow them carefully, but since I am not getting the recovery console, I am not sure what might be wrong.
glenwill said:
Just to clarify, I'm not asking about rooting, but about flashing and the recovery console. I'm an EVO user, and I just don't know the idiosyncrasies of the Captivate.
Am I correct that the messages I get when trying to go to recovery (starting with movi_check start) are normal, and that after those messages I should get the recovery console? If so, it seems to be stuck on the "install default apk files please wait" step, as this doesn't seem to complete.
I do see the steps on how to flash, and can follow them carefully, but since I am not getting the recovery console, I am not sure what might be wrong.
Click to expand...
Click to collapse
You can't flash a rom with stock recovery. You need clockwork mod wich can be achieve by using rom manager (needs root) or flashign with Odin a kernel that has it built in
prbassplayer said:
You can't flash a rom with stock recovery. You need clockwork mod wich can be achieve by using rom manager (needs root) or flashign with Odin a kernel that has it built in
Click to expand...
Click to collapse
Thanks for your help. I do understand I can't flash with stock recovery.
Both the 'Read BEFORE flashing' and the 'How to Install a custom ROM' guides instruct to install clockwork mod. I am aware that installing a new recovery needs to be done before flashing on probably any device.
I guess my primary confusion was whether the 'movi_check start' verbage is normal to see when I am trying to go to Recovery before installing Clockwork. Another google search finally found a hit that says it is normal to see this. I'm still not clear whether I should be concerned that it hangs on the "install default apk files" step.
Since it hangs, I don't ever get any kind of recovery menu, so it wasn't obvious to me that I was actually in the stock recovery.
Assuming this doesn't indicate any issues, I'll proceed with the instructions and all should be well.
Well I hope you are able to work it out. ^^