[Q] OTA JH7 and Cockwork - Captivate Q&A, Help & Troubleshooting

OK I have two Captivates one to use and one to "mess up" LOL Seems my wife prefers my old N97...
So here is sending me to school.
So far I have rooted from JH6 Unrooted
Applied JH7 using Mini Kies
Master Cleared and put DG "official beta Froyo on it. (all of which still makes me a Noob at this)
Now I went back to Stock and am setting it up for Clockwork which I don;t seem to understand after reading through the threads (saw the dreaded little phone=PC moniker for the first time but was able to try again and it worked.)
My goal is to be able to use what ever ROM I want then use Clockwork to get it back to a ate ATT will recognize for an official 2.2 upgrade if that is even possible
I have upgraded to JH7 in the past using Mini Kies......now I read there is a Clockwork/JH7OTA combo that might do the same and allow for an ATT upgrade..
Should I put Clockwork on an SD card to be able to use it or put (recovery-)Update.zip and OTAJH& in the root of the internal SD and run recovery as instructed.....
THEN if I want to load Cognition's 2.2 Beta 5 for fun can I use Clockwork to get it back to ATT recognizable form??

It has been stated hundreds of times Clockwork does not work with Froyo. So the answer is no, the only way to go back to JH7 or JF6 is to flash with Odin back to stock, JF6, then use Clockwork.

Rhiannon224 said:
It has been stated hundreds of times Clockwork does not work with Froyo. So the answer is no, the only way to go back to JH7 or JF6 is to flash with Odin back to stock, JF6, then use Clockwork.
Click to expand...
Click to collapse
Okay.So Clockwork is not the tool to use when going back to stock. A PC is needed. ODIN is the ONLY way....Got it.
But it can be used to install 2.2 Beta 5 zip like it was used to instal the OTA.zip?
So apparently Clockwork is of no use to those on Froyo at this time. Is there something on froyo or any non stock ROM that CAN be used in the same way?
Just trying to get a handle on this......
I heave read hundreds of posts and threads and sometimes the information becomes juxtaposed. Sometimes "Rights" become "wrongs" as threads continue....

LOL, yeah the threads become a bunch of silly noob questions. I don't remember how it was installed honestly there have been so many updates I lost track and since Clockwork is useless for me at the moment I haven't thought about it. There is a thread over on XDA that someone was able to make an update using FROYO that is 2e so that Clockwork works with it. I haven't tried it yet today. I was watching to see if many had trouble with it. I'm guessing they used a kernal that is based on Eclair and used Froyo ROM, but I am not 100% on that, some are using it with the current Cog 2.2 beta 5.5 so I amy give it a shot. here's the link
http://forum.xda-developers.com/showthread.php?t=804226

Am I the only one who giggled at the typo in the thread title? Cockwork?

miztaken1312 said:
Am I the only one who giggled at the typo in the thread title? Cockwork?
Click to expand...
Click to collapse
NO i giggle as well....in embarrassment ...especially when I found I could not edit it..
BTW just tried loading Cognition 2.2 5 ROM with clockwork....no go
I have taken the clockwork.zip off the phone left the Cognition on and going to root and install using Rom Manager.....

Related

Installing Update using Clockwork and OTA JH7 taking an hour?

The bar has not filled up...What to do? Quit and try again?
USed Clockwork mod to find and install OTA'JH7.zip
Searched for it
found it
Installing hangup and nothing in the bar indicating anything is being done
Did you have any lagfixes installed prior to trying to update?
Rhiannon224 said:
Did you have any lagfixes installed prior to trying to update?
Click to expand...
Click to collapse
My history is as follows:
Stock to Root
Back to stock
Installed JH7 via mini Kies
BAck to stock
(Learned how to use adb to get into download mode)
Loaded Froyo "Officical beta"
Wanted to try the Clockwork mod so I went back to stock using ODIN
Installed the Zip files in proceeded to install Clockwork then searched for and found the OTA file
There are two files out there. JH7_OTA.zip and JTA_OTA_STOCK.zip
The latter did not work and hung up on install..I loaded the former and it installed.
Now a few questions regarding Clockwork
I dropped the Cognition 2.2 5 in my root directory..Can I load that in the same way? Then go back to the JH7 when the Official 2.2 froyo comes out? Whether rooted or not?
If I want to root the phone I will have two update.zips in the root directory (Clockwork and the root upadate.zip)...Must I remove Clockwork? IS it loaded or does it execute from the zip every time? Can I rename the Root update.zip to something else now that I can "find" it with Clickwork?
I like the clockworkmod and will definitely pay for it if it allows me to change ROMS I place on the SD on the fly rooted or unrooted (would never need to go back to JH6 and deal with adb if so)
Final question,,,Shoudl I use clockwork to "reset the battery?"
I do not intend to do any lagfixing beyond whatever is in Cognition since that seems to be more of a problem than it may be worth
Thanks...Its been two weeks since i became an Andriod fan and i have learned alot.....and still am
Read the Cog wiki, there have been so many versions I can't remember all of them and the install instructions, some you needed to flash through Clockwork. Cog 2.2 5 Is Froyo whicj means you can not use Clockwork to flash anything with Froyo running because Froyo is not an official release and is BETA it is not signed, Koush hasn't found a way to sign it in order for Clockwork to work with it yet. Clockwork is worth having the paid version yes. You must be rooted to use ROM Manager so unrooting you loose access.
If you are using JH7 that you flashed check if you have SuperUser in your apps drawer, if so you are rooted. Get used to Odin if you are going to mod your phone you will use it more than you think and it becomes less scarey the more you use it.
You've already modded your phone so OTA updates will not work for you, mini kies will so go ahead and flash away, you will eventually have to flash with Odin to update with mini kies so go have fun. Also, those guys on the dev section will have the official up as soon as it comes out. We had JH7 within a few hours, none of us could do the OTA and AT&T bricked a lot of phones so I will only use stuff from Samsung anyways.
Rhiannon224 said:
Read the Cog wiki, there have been so many versions I can't remember all of them and the install instructions, some you needed to flash through Clockwork. Cog 2.2 5 Is Froyo whicj means you can not use Clockwork to flash anything with Froyo running because Froyo is not an official release and is BETA it is not signed, Koush hasn't found a way to sign it in order for Clockwork to work with it yet. Clockwork is worth having the paid version yes. You must be rooted to use ROM Manager so unrooting you loose access.
If you are using JH7 that you flashed check if you have SuperUser in your apps drawer, if so you are rooted. Get used to Odin if you are going to mod your phone you will use it more than you think and it becomes less scarey the more you use it.
You've already modded your phone so OTA updates will not work for you, mini kies will so go ahead and flash away, you will eventually have to flash with Odin to update with mini kies so go have fun. Also, those guys on the dev section will have the official up as soon as it comes out. We had JH7 within a few hours, none of us could do the OTA and AT&T bricked a lot of phones so I will only use stuff from Samsung anyways.
Click to expand...
Click to collapse
Yeah I have two phones and one is the guinea pig. I have my main phone on the pre release of Froyo. I am practicing getting the second phone eventually from Cognition2.2 5 to Samsung's official release. I have used ODIN probably 10 times to get back to JH6 where I have to use the adb SDK to get into recovery/Download modes.
The OTA updates did not work for either phone which is why I began modding and learning, Mini Kies was the only way to get JH7 until now with Clockwork.

newbie..flashed to Cog 2.7, wifi stopped working, any good rom?

Hi, my first post..
so i read some and rooted my captivate, flashed it to Cognition 2.3b7 and since then my wifi stopped working...
I am guessing I can flash with another ROM ?
and don't have to go back to stock build??
if so which rom should I go with? I like the Gingerbread look and feel but open to try others...this phone is new and I don't have to worry about files/information yet.
thanks for your help
First, welcome to XDA, but...wrong section, this belongs in Q&A not development.
Mods please move.
You want to flash stock using odin
http://forum.xda-developers.com/showthread.php?t=731989
Don't try to flash another rom directly on top, you will compound the problem.
Have you tried reboot on your phone
If you are lost you can pm me
Sent from my SAMSUNG-SGH-I897 using XDA App
thanks mcord. so if I go back to stock do I have to root again?
also please let me know which rom to use to flash..I read Assonance 5.0 might be good?
thanks
greenzellybean said:
thanks mcord. so if I go back to stock do I have to root again?
also please let me know which rom to use to flash..I read Assonance 5.0 might be good?
thanks
Click to expand...
Click to collapse
You should have an update zip on your sd from rom manager/clockwork. Take this fille, and save it to your pc, our external sd. When you are on stock put it back on your internal sd, boot into recovery, reinstall packages twice, you will have clockwork recovery. Youcan flash roms from here without root.
I am not sure your problem was from cognition, maybe a bad flash. I am using assonance, so far so good but I have not been on it for long, axura is nice as well.
I would also suggest that you do a master clear after odin, make sure you are not keeping any troubled files. Make sure you backup anything you do not want erased to your oc or external sd
Remove sim and external sd before odin, master clear, or rom flash. Suggested not to flash roms with usb plugged in. always best to flash with full bat
Sent from my SAMSUNG-SGH-I897 using XDA App
Well, If you are going to flash trough CWM then no, you dont need to root again because you dont need to root to use CWM. Just make sure you keep the CWM update.zip on your sdcard boot into recovery and choose reinstall packages and you will boot into CWM.
And about the ROM. Well, you could try Cognition2.3b6, Perception8 or Assonance. I heard Cog has better battery life than Perc but Perc is faster, also the main diference is that Perc is based on i9000 ROM and Cog is based on Captivate ROM. I really dont know anything about Assonance escept that people say it's good.
If you are looking for another ROM, consider Assonance: http://forum.xda-developers.com/showthread.php?t=856877
Full instructions are included in the original post.
Hi guys. First post so hope I don't look like an idiot!
Flashed Cognition v2.3b6 2 weeks ago but had to go back to stock 2.1 jh6 reason being while @ home I can connect to my protected wifi network with no problem but if I try to
use an open wifi network say at Denny's or an AT&T hotspot my wifi just loops and no hook up! {N/G} Have to switch back to 3G to get to on the net. After flash back to stock no wifi problems anywhere. Yesterday, 12/22/2010, flash to new Cognition v2.3b8. After flash went to Denny's and wifi N/G! Am I alone here or is anyone else having this problem? Flashed back to stock and today did Kies mini update to jh7, AOK! Went back to Denny's and had no problems connecting to wifi??????????????????

Going back in time... Sort of.

Ok I got a quick question and the searching I've done really hasn't turned up anything definitive. I've got andromeda 3 right now and a back up from rom manager from when my cappy was stock running 2.2 and just rooted running either possibly onix or speed mod kernel that I made before I went with andromeda and, I also have a stock kernel backup from sgs kernel flasher.... I know I was very paranoid before my first rom flash. My question is if I wanted to go back to stock at some point should I just use clockwork to restore the nandroid I made with rom manager and flash the kernel after with sgs kernel flasher or should I do an odin 1 click to get to stock 2.1 then use mini kies to go back to 2.2. I guess it wasnt too short, really I just wanna know is one way 'safer' than the other to go back to stock if I decided too.
Sent from my SAMSUNG-SGH-I897 using XDA App
There is a cwm flashable stock image in dev somewhere, I don't have it bookmarked sorry. I always use ODIN to go stock. Doing a nandroid backup wasn't backing up all the files like it should back in the day. Not sure if it is now, but I never relied on it. I haven't used kies in months, no need to do a stock update. But, really, the only reason you would want stock is if you're selling it, warranting it, or something where you need stock on it. AdamOutler is working on heimdal. I think there is stock version of it. But as far as bootloaders go, you're on 2.2, now. ODIN brick is ok. I've had a few. Jig will solve it.
Edit
I guess, to answer your question, ODIN is fine going from any 2.2 rom to stock 2.1. The trouble is going from 2.3 to 2.2 or 2.1. Then the bootloaders change. If something messes up in the process, you're screwed.
Ok thanks that's what I've been trying to figure out, and yeah I have no reason to wanna go stock but its just for future reference, wanted to sell *gasp* or need to have it repaired. Who knows maybe i'll throw my back up at it at some point just to see what happens and see if it really was a full back up and I'll search for what you mentioned. Kies has worked the one time I used it so maybe I'll try that for fun and see if it goes alright again. Really I'm just looking for the fastest way to go back which if it goes alright should be my rom manager back up. Thanks for mentioning the deal with 2.3 roms from the forum threads I've read it seemed kinda risky to make the jump so I've stuck with 2.2 roms so far.
Sent from my SAMSUNG-SGH-I897 w/ Andromeda 3, OC to 1.3ghx using XDA App

Another bricked phone after oden. 1011. Help!!

I thought I knew what I was doing...
I've read and read and read. Thought I had all my ducks in a row. Thought I had everything figured out. But now I have a bricked phone.
I bought my Captivate refurbished from AT&T about 3 months ago. The mfg date is listed as 1011. It came with Froyo. By the third day I had it rooted and Cognition installed. Loved it. But lately it was starting to freeze up, lag, etc. so I decided to install Serendipity.
I followed the directions in the famous How-To thread here.
Odin reported success, but now my phone is stuck in bootloop. None of the tricks for getting it back into download mode worked.
I went to Radio Shack and bought some resisters and made a jig. Now, I can successfully get back to download mode now, so I'm still holding out hope!
I tried Odin again, but got the same result.
My warranty is up in 3 days. Called warranty place today and they won't do anything unless the phone can get to a recovery screen (probably their way of knowing when people have been doing what I've been doing!). Which it won't. I can put it in download mode with the jig. Otherwise, I just get the boot loop.
I have been stressing over this for the last 15 hours. I can't sleep. I've read countless forum posts. Now I find that Odin with Froyo and phones dated from 1008 and above is tricky. How did I miss that before? I've read so much, seen so many threads with people saying "do this" followed by "no don't do that" followed by "that's always worked for me" but it's not working for ME. At this point I'm confused and scared and just hope somebody can point me to instructions for getting a usable phone again.
EDIT: I see I misspelled "Odin" in the title of the thread... tried to edit it but I can't. Sorry.
That guide has not been updated for 2.3 roms. you should follow the instructions that were written by the rom maker, for the rom your trying to flash
This looks relevant http://forum.xda-developers.com/showthread.php?t=995143
- For unbricking
AdamOutler, is working on a unbrick method. http://forum.xda-developers.com/showthread.php?t=1206216
Or mobiletechvideos they have an unbricking service for 50$
(side-note if you have read and read like you said you should have had come a cross some of this.)
Which Cognition were u on ? And which Odin did u use ?
And since u can still get into Download mode u can relax a little, cause that's a good thing.
Lol relax If the phone shows any signs of life, that means it can be fix (usually). Now if the phone after odin doesn't want to turn on THEN your bricked. Since your phone is a newer build and they have been known to not always like jf6 Odin I suggest you try this KB1 odin. Best of luck
speedy_11 said:
That guide has not been updated for 2.3 roms. you should follow the instructions that were written by the rom maker, for the rom your trying to flash
Click to expand...
Click to collapse
Know that now! lol The instructions for Serendipity indicated I didn't have to go back to stock. But I just wasn't sure. So I figured I'd go ahead back to stock just to "be safe." That worked out well!
speedy_11 said:
(side-note if you have read and read like you said you should have had come a cross some of this.)
Click to expand...
Click to collapse
Yes, you are correct. And I deserve any amount of "stupid newb" criticism you can heap on me.
For2ndtwin said:
Which Cognition were u on ? And which Odin did u use ?
Click to expand...
Click to collapse
Which Cognition? Uhm... I don't recall. Whatever was the newest version when I installed it nearly 3 months ago.
I used the Odin One-Click. The filename is I897UCJF6-final-OCD-REV0. When I run it, the title bar says Odin3Execution_v1.0.
For2ndtwin said:
And since u can still get into Download mode u can relax a little, cause that's a good thing.
Click to expand...
Click to collapse
That's what I keep trying to tell myself...
prbassplayer said:
Lol relax If the phone shows any signs of life, that means it can be fix (usually). Now if the phone after odin doesn't want to turn on THEN your bricked. Since your phone is a newer build and they have been known to not always like jf6 Odin I suggest you try this KB1 odin. Best of luck
Click to expand...
Click to collapse
Thanks! I'm reading through the threads y'all linked to and I'm sure I'll be back with questions. This whole Odin thing, for one, has me confused. There's at least a dozen different versions available from samfirmware.com, there are different versions of the one-click (like the Designgears 2.2 one? Should I try that one?), then different "full" versions with different instructions ("only use the pda button," "use this pit file", "don't use a pit file", etc...) I'm trying my best to make sense of it all. I was in full-blown panic mode yesterday and trying to read through a dozen different threads at once. Maybe today I can slow down a bit, take a breath, and get this figured out.
The one click I linked should get you to stock. Atleast so you have a funtional phone. There is only one true odin with different versions (1.1 1.82 etc) one clicks r simplified odin that will only flash something specific like 2.1 jf6 or 2.3.3 kf1 to name a few. Samfirmware.com uses the actual odin as it supplies packages for it.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
prbassplayer said:
The one click I linked should get you to stock. Atleast so you have a funtional phone. There is only one true odin with different versions (1.1 1.82 etc) one clicks r simplified odin that will only flash something specific like 2.1 jf6 or 2.3.3 kf1 to name a few. Samfirmware.com uses the actual odin as it supplies packages for it.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
Ok, another sucky thing is I'm on satellite internet and already dangerously close to being FAP'd. I've got to run into town this evening and will try to find some free wifi so I can download those things. Until then... it's just reading threads.
One quick question... that's a one-click you linked to? Posts 33 and 34 say to use regular Odin, not one-click. They provide a link to download regular Odin. Is the I897UCKB1-homeBinary.tar file part of the package I download from the link in the first page? The one-clicks I've downloaded have just been an .exe file.
HeathicusF said:
Ok, another sucky thing is I'm on satellite internet and already dangerously close to being FAP'd. I've got to run into town this evening and will try to find some free wifi so I can download those things. Until then... it's just reading threads.
One quick question... that's a one-click you linked to? Posts 33 and 34 say to use regular Odin, not one-click. They provide a link to download regular Odin. Is the I897UCKB1-homeBinary.tar file part of the package I download from the link in the first page? The one-clicks I've downloaded have just been an .exe file.
Click to expand...
Click to collapse
Because I'm a derp and didn't read it well. Regardless its the package files for stock KB1 use regular ODIN for it. Stick it in PDA. It doesn't have bootloaders so the possibilities of hard bricking are very low xD. My mistake for saying it was 1 click sorry xD
Ok, thanks. I'll post an update tonight after I get back home.
SUCCESS!!!
I now have a fully functional phone running what appears to be stock 2.2 firmware!!
THANK YOU!!!!
However... I can't seem to get into recovery mode. When I hold down all three buttons, it looks like I'm stuck in a boot loop again (ATT World Phone screen flashes). If I release the power button keeping the volume buttons held down, the phone just boots as normal. Is there a fix for this?
I still have all the folders for my old apps on the internal memory card. Can I delete these manually? I'd like it to be back to truly stock settings and start all over. Is that what the "Master Clear" in Odin is for? I didn't see that option in "regular" Odin.
I did get it rooted with Super-One-Click.
Ok, this is where I'm at.
Stock Foyo working phone.
Can't boot into recovery using volume & power buttons.
Rooted with Super One Click.
Installed Superuser.
Installed Rom Manager. At least now I can boot into Recovery Mode through the option in Rom Manager.
Flashed Clockworkmod using Rom Manager. Reported success, but Recovery Mode is still stock version 3e, not 2e. So, still can't install a new custom rom.
I'm a little nervous to try anything else at this point, but really want to be running Serendipity. Serendipity says DO NOT use Rom Manager to install it.
What to do from here? I'm researching, but any pointers would be helpful.
If I install Cognition again from Rom Manager (is that possible/safe at this point?), will that replace the Recovery Mode with 2e? Or is that not related at all?
not related at all.
you should really take the 30 seconds to search for that error you get when you try to reinstall packages from 3e recovery.....it would solve your problems.....
or do it the EASY way and just ODIN a freaking kernel on it that has built in CWM.
flash your rom of choice from CWM
HeathicusF said:
Ok, this is where I'm at.
Stock Foyo working phone.
Can't boot into recovery using volume & power buttons.
Rooted with Super One Click.
Installed Superuser.
Installed Rom Manager. At least now I can boot into Recovery Mode through the option in Rom Manager.
Flashed Clockworkmod using Rom Manager. Reported success, but Recovery Mode is still stock version 3e, not 2e. So, still can't install a new custom rom.
I'm a little nervous to try anything else at this point, but really want to be running Serendipity. Serendipity says DO NOT use Rom Manager to install it.
What to do from here? I'm researching, but any pointers would be helpful.
If I install Cognition again from Rom Manager (is that possible/safe at this point?), will that replace the Recovery Mode with 2e? Or is that not related at all?
Click to expand...
Click to collapse
You are in 3e recovery because you are running froyo. Flash to the stock 2.1 eclair and that will get you back to 2e. There are other ways but thats the most basic I feel.
Sent from my Samsung Captivate running Cognition 2.2 rom
capocaccia said:
You are in 3e recovery because you are running froyo. Flash to the stock 2.1 eclair and that will get you back to 2e.
Click to expand...
Click to collapse
Yeah, trying to flash the stock 2.1 is what got me in this trouble to begin with!
Pirateghost said:
not related at all.
Click to expand...
Click to collapse
Thanks!
Pirateghost said:
you should really take the 30 seconds to search for that error you get when you try to reinstall packages from 3e recovery.....it would solve your problems.....
Click to expand...
Click to collapse
I'm trying... but 1) satellite internet is frustratingly slow - not much better than dial-up at times; and 2) each path of research I take leads to several forks with several different people giving several different solutions to problems, some people saying it worked, some people saying it didn't, which leads to several more alternative solutions, some of which don't work, etc... It gets confusing after a while, but I'm trying my best to read through all the threads I wander through and to make sense of it all. Yeah, I'm a stupid newbie....
capocaccia said:
You are in 3e recovery because you are running froyo. Flash to the stock 2.1 eclair and that will get you back to 2e. There are other ways but thats the most basic I feel.
Sent from my Samsung Captivate running Cognition 2.2 rom
Click to expand...
Click to collapse
If you would have read the beginning og the thread you know that his phone didn't take well to jf6.
prbassplayer said:
If you would have read the beginning og the thread you know that his phone didn't take well to jf6.
Click to expand...
Click to collapse
There are more builds of 2.1 other than jf6...
Op look at the bottom of the first post of the odin one click thread by design gears there are 2 stock firmware packages the first one is an eclair build use the full version of odin (not one click) flash that and you're good.
Or search for the work around of 3e recovery, look in the sticky roll up at the to of the general section...it'll say "e: signature verification error"
HeathicusF said:
I'm trying... but 1) satellite internet is frustratingly slow - not much better than dial-up at times; and 2) each path of research I take leads to several forks with several different people giving several different solutions to problems, some people saying it worked, some people saying it didn't, which leads to several more alternative solutions, some of which don't work, etc... It gets confusing after a while, but I'm trying my best to read through all the threads I wander through and to make sense of it all. Yeah, I'm a stupid newbie....
Click to expand...
Click to collapse
funny thing, that STICKY section we have at the top of the forum....
theres this one called a 'STICKY ROLL-UP', not to be confused with fruit roll-up.
http://forum.xda-developers.com/showthread.php?t=1161102
all the info you need is located within it.....oddly enough
Pirateghost said:
funny thing, that STICKY section we have at the top of the forum....
theres this one called a 'STICKY ROLL-UP', not to be confused with fruit roll-up.
http://forum.xda-developers.com/showthread.php?t=1161102
all the info you need is located within it.....oddly enough
Click to expand...
Click to collapse
Yes, I tend to rely to heavily on the search feature and overlook sticky threads. Thanks for the reminder.
The "Fixing 3e" methods listed in this thread don't seem to be working for me. First method (the script) gives me an error. Tried with Win 7 64bit, and 32bit (two different computers). Yes, phone drivers were installed. Second method (manual copying of the file) doesn't work. When using Terminal Emulator to execute the command I get the message "Operation not permitted." When using ES File Explorer with Mount file System as writable checked in the settings, I get no errors or complaints... but nothing has changed when I boot into recovery.
Still working on it. Thanks for the pointers.
why dont you try one of the ODIN KERNELS that will add CWM for you? why are you wasting your time running in circles for nothing?
put phone in download mode
open ODIN, add the kernel into the PDA slot
connect phone
flash kernel
now you have CWM and can flash any 2.2 rom you want
Pirateghost said:
why dont you try one of the ODIN KERNELS that will add CWM for you? why are you wasting your time running in circles for nothing?
put phone in download mode
open ODIN, add the kernel into the PDA slot
connect phone
flash kernel
now you have CWM and can flash any 2.2 rom you want
Click to expand...
Click to collapse
After softbricking (is that the right term?) my phone with Odin, it makes me a little nervous. (Of course, I also recovered my phone with Odin, so maybe I shouldn't be nervous...).
This running around in circles...? We'll call it "education"!

Tried going from 2.2 Andrometa3 to ICS ROM 4.0.3. Houston we have a problem.

I used AdamOutler 's guide to root and put a custom ROM on Captivate 2.2 found here:
http://forum.xda-developers.com/showthread.php?t=1012769
And everything went swiftly. AT THIS POINT, I MADE A NANDROID BACKUP
I then wanted to step up to an Ice Cream Sandwich ROM, which was the main purpose of my rooting in the first place. So, I downloaded the ROM found in this forum, as it is the most popular amongst the forums, so to seem. I found it here:
http://forum.xda-developers.com/showthread.php?t=1363760
Well I downloaded the ROM straight from my phone on the browser, then put it on the Root of my internal memory.
I booted into recovery, Factory Reset/Wipe Cache Partition/Wipe Dalvik Cache.
Went to install .zip from SD card, then clicked on install the ICS ROM.
Began to seem as if it was updating, then the phone shut off, started bootlooping.
No big deal I thought, just boot into recovery, right? I booted into recovery. It went from the Red CWM that i had seen before, to a Blue one.
I selected my nandroid backup, and it gave me all sorts of errors.
Got to the point where CWM was acting as if it could even find where it was supposed to work from?
Now I have the Phone>!<Computer on the black screen when I try to turn on.
Anyone else ever had this problem, or could someone tell me what went wrong? Not in a huge rush as this is just my development phone, but do I need to go ahead and use the Odin3 One Click to do a full complete restore or is there any way of saving what I had?
Thanks guys, God Bless.
LOL OOPS thought i was in the dev section.... ignore..help below.
xCaptivateRx said:
I used AdamOutler 's guide to root and put a custom ROM on Captivate 2.2 found here:
http://forum.xda-developers.com/showthread.php?t=1012769
And everything went swiftly. AT THIS POINT, I MADE A NANDROID BACKUP
I then wanted to step up to an Ice Cream Sandwich ROM, which was the main purpose of my rooting in the first place. So, I downloaded the ROM found in this forum, as it is the most popular amongst the forums, so to seem. I found it here:
http://forum.xda-developers.com/showthread.php?t=1363760
Well I downloaded the ROM straight from my phone on the browser, then put it on the Root of my internal memory.
I booted into recovery, Factory Reset/Wipe Cache Partition/Wipe Dalvik Cache.
Went to install .zip from SD card, then clicked on install the ICS ROM.
Began to seem as if it was updating, then the phone shut off, started bootlooping.
No big deal I thought, just boot into recovery, right? I booted into recovery. It went from the Red CWM that i had seen before, to a Blue one.
I selected my nandroid backup, and it gave me all sorts of errors.
Got to the point where CWM was acting as if it could even find where it was supposed to work from?
Now I have the Phone>!<Computer on the black screen when I try to turn on.
Anyone else ever had this problem, or could someone tell me what went wrong? Not in a huge rush as this is just my development phone, but do I need to go ahead and use the Odin3 One Click to do a full complete restore or is there any way of saving what I had?
Thanks guys, God Bless.
Click to expand...
Click to collapse
Different kernels have different colour recoveries. kernels change with rom.
Different CWM version recoveries are incompatible.
Almost anyone that has flashed a samsung galaxy phone has seen that screen, and it is correctly written " Phone /!\ PC " (you can choose to underline the /!\ if you want to be fancy). it is called the "soft brick screen" hint hint.. go search.
yes
yes. restore with same kernel you used to back it up.
TRusselo said:
Different kernels have different colour recoveries. kernels change with rom.
Different CWM version recoveries are incompatible.
Almost anyone that has flashed a samsung galaxy phone has seen that screen, and it is correctly written " Phone /!\ PC " (you can choose to underline the /!\ if you want to be fancy). it is called the "soft brick screen" hint hint.. go search.
yes
yes. restore with same kernel you used to back it up.
Click to expand...
Click to collapse
Very good responce...however after odin3 one clicking back to stock 2.1 eclair, I lost my clockwork mod folder that was on the internal SD, of course. Rookie mistake, I should've definately copied it on to the external SD card. Thanks for informing me of proper terminology. Also, after downloading rom manager and flashing, booting recovery, I can only access cwm through the rom manager, the three button fix doesn't work.
Why was this moved? I posted in general..
because you have a question/problem
rom manager is only used with 2.1 (for captivate). doesnt work on 2.2 or 2.3.X or 4.0.X
in all newer versions of android we "bake" cwm into the custom kernels we package into the custom roms. so there is no stock recovery and you dont need the update.zip.
dunno why you would flash all the way back to 2.1... EWWW.
in the dev section there is a sticky called odin master collection. use a newer stock rom. the master collection also has stocks versions, pre-packcaged with a custom cwm kernel so you can skip a step of getting it after going back to stock.
Do we know why this happened in the first place? Incompatible kernel? Is there a guide somewhere for moving from GB to ICS?
Sent from my SGH-I897 using XDA App
I thought you had to have GB bootloaders before you flashed any ICS roms ? I know I've read that ,then again I've read 10,000 threats and sometimes it becomes mind numbing.
Do you not have to flash back to 2.1 after having these problems? Right now my phone is at the soft brick screen, no button combo working. Not recognized by the computer either. I'm heading out to radio shack and make a USB jig in a bit. I'd love to just flash straight up to a gingerbread ROM if I can possibly get this thing in download mode. Anybody help a brotha out!
Edit: the sim is not activated, I just run it off Wi-Fi because big red is my carrier. This is my development phone. So I can't just KIES update to whatever the newest is.
Sent from my DROID X2 using XDA App
Any firmware should work, no need to go all the way to eclair...just flash gingerbread.
Don't think its been mentioned yet but when going from 2.2 to ICS, you have to flash the rom twice to get out of the bootloops. Sounds like you were at that point but when you flashed your nandroid instead of the ICS rom again, your phone must not have liked it.
aww.W.T.F? said:
I thought you had to have GB bootloaders before you flashed any ICS roms ? I know I've read that ,then again I've read 10,000 threats and sometimes it becomes mind numbing.
Click to expand...
Click to collapse
Not all ICS ROM's require GB bootloaders. I ran THS, and am now on vibranturk's AOKP and I came straight from 2.1
I think the issue was you're supposed to flash them twice. Well that fixed it for me. I dkbhave the gingerbread boot loaders now though
Sent from my SGH-I897 using xda premium
I went from bone stock Froyo 2.2 straight to THS ICS with no problems whatsoever. So some ICS Roms doesn't need GB bootloaders.
Sent from my SGH-I897 using xda premium
I'm on the same situation as the original poster: I'm on andromeda3 and now I want to upgrade to ICS. Right now my captivate has cwm 2.5.1.2 can I flash any ICS mod from there or do I need to do something else?
See this.... TRusselo's "Guide..." that is a Stickied Thread in the Q & A Forum.
I believe u will need the Gingerbread Bootloaders...
Sent from my SAMSUNG-SGH-I777 using xda premium

Categories

Resources