SuperFroyo MVZ Legend 8. New froyo rom for our Legends!! - Legend Android Development

Attention, new stable rom for our legends!
From a Spanish cheff, SuperFroyo MVZ Legend 8
The thread is in Spanish, but you can download the rom from the link "Descarga" in red.
The thread: http://www.movilzona.es/foro/topic2567.html
Thanks to superatmel for his hard work, we finally have an alternative with Froyo in our machines.
EDIT: The rom is working FINE finally right now. Download and test!!
Enjoy this rom from Superatmel
EDIT2: Translation of the first post of the SuperFroyo ROM:
SuperFroyo MVZ 8 for HTC Legend, MovilZona edition
It´s installed from the recovery, as every time you install a ROM. Don't worry if takes a long time to get the first splash. It´s absolutely normal because it executes the config files in the first boot.
Added by manudas: It really reboots twice, the first time for the overlay filesystem, for having read/write access to the system partition.
You must have the Legend rooted. If you don´t know how to do, please search in this forum before asking.
I strongly recommend a full formatting to the SDCARD with three partitions EXT3 512MB / LinuxSwap 64MB and the rest in FAT32. You can do it from the recovery, but remember to save your data before (pics, music, etc…). This is because some directories are created in the sdcard (Android) in which records data I found to negatively affect the rom. PROVEN!
-------------------
WARNING!
This rom autoinstalls itself, and also restarts twice after installation. Ie, reconfigures itself.
WIPE is recommend before the installation, because it has many changes. After installing the rom leave it alone for at least 4 minutes, not touching the screen, because this is the time it takes to finish of installing everything. Then you can setup the rom, but I recommend that you skip the google config, pressing skip button, and once in the launcher you can configure the rom as you like. This is because otherwise the phone will autoconnect to the market, and begin to automatically download all the applications you had installed. Al this can saturate the terminal because it does everything at once. Besides, if the phone connects to the market, background image that you had prior to the rom flashing will be there again, and then you will ask how is possible that after a wipe the bottom appears as you had before.
If you follow my instructions you will do a clean install. Then you should enter the market and install a free application to refresh the applications you have installed in the terminal and to see if everything went well you should go into "Downloads" and see if appears at least an update of SupSetup I'll post this afternoon to check .
Very attentive to you who do restorations of any kind against the rom cause you can have problems. (I mean backups, including their own SupSetup least in the application section). Special attention to restore configuration data of any kind. Under doubt, the best it´s not doing it.
Remember that the installation is at your own risk.
- Added Apps2sd in SupSetup. Now even allows the deactivation of this without having to WIPE. NEW! Do not be alarmed if you reboot, read the posts !!!!! (Better don´t use the applications move feature of Froyo)
Don´t activate Apps2sd without at least once you have restarted
Improvements in this version.
All versions are the same for all terminals
In 8
- SupSetup with integration to Legend
- Implementation of the base for HTC Legend
- Bug fixed Chamber
- HTC Legend Custom Kernel (2.6.29.6 reissued)
- Deactivated perflock for changing CPU frequencies (Only Legend)
- Implemented Swap Legend, not Compcache
- New edition of Framework for all bases (Nexus, Magic, Dream, Legend, Galaxy S)
- Preparation for FM (But not yet available)
In 6.6.4
- On base Froyo FRG83 2.2.1
- Kernel 2.6.35.6 (Nexus One, Magic & Dream)
- Digital retouching (the Chinese muiu)
- More stable Camara
- Google Apps updates
- Etc. ..
In 6.6.2
- New Gmail upgradeable
- New upgradeable Street View
- New way of setting up the internal processes with better results
- New SupSetup V12 14.06
- Edited the rill for a better and stable 3G HSDPA coverage
- Various internal improvements
In 6.6
- New management of the post installation Rom
- New way of SupSetup for disabling applications of the rom (Attention!! Disable is not uninstall)
- New very optimized kernel and removed processes that do not use the Nexus
- New SupSetup V12 v14.00
- New Launcher Pro if activated from the SupSetup configured for higher performance.
- Appear new SupSetup's with more applications to disable!!
- Now install themselves the voices for the GPS
- And more internal improvements for a brutal stability. That if it´s installed with a generous WIPE!
- Adding the Control of energy, I recommend activating the cells that are in the last captures for battery consumption settings, because for example when you turn on wifi automatically pass to 2g for lower battery consumption or you change the data will change also to 2g, or if the wifi is enabled then will activate the sync automatically, etc ...
In 6.4
-Added new option in SupSetup with the direct integration against the system (Optimize the system)
- New setup for the Launcher Pro: to activate it from the SupSetup, go to applications! Important if the Launcher Pro is enabled, for activating the future updates of the market you have to execute the option Optimize system!
- New Shazam
- Rescheduled framework for the implementation of the new option of SupSetup
- Kernel settings
- Adding the Control of energy, I recommend activating the cells that are in the last catch for battery consumption settings.
- Etc ...
In 6.2
- Fix Shazam
- Recompiled the framework to eliminate obsolete processes
- A small graphic touch
- Added black and white bar from the jrosmetamorh. (You must enter the program and select the folder jrosmetamorh / SuperFroyoBNegra or SuperFroyoBBlanca, wait to finish installing and reboot).
- Set some xml framework
- New icon of the battery.
- Various internal improvements
- This rom is very stable.
In 6.1
- All Cyano improvements
- Fix for flash player to install without Wipe (Nexus only)
- Improved 3D Gallery
- New ADWLauncher 1.1.5
- SupSetup V12 12.94
- Updated all apps
- Added icon headphones
- New kernel 2.6.34.5
- And as always own improvements
In 6.0
- Fixed a bug in the CPU frequency
- Fixed issue with FlashPlayer, if it does not work, apply "the force be with you" from the SupSetup, and wait to restart. (Solo Nexus)
- Fixed problem with Speech Sinthesis.
- Edited the battery again to display up to 100% load
- Revert SoundRecorder
- Added Series for Android
- Optimized Kernel for lower consumption. (Removed unused drivers)
- And besides of my optimizations, all from Cyanogen too
In 4.4
- Added restart in normal mode, recovery and bootloader
- Enabled again hsdpa
- Fixed bug in the battery icon
- New Wallpaper.apk
- New sounds and notifications in addition to integrating the lock & unlock from Iphone
- Many of internal improvements in the libraries
- Camera with manual focus touching the screen.
- Added Launcher Pro activating it from the SupSetup (applications menu)
- Added File Explorer activating it from the SupSetup (applications menu)
- ADWLauncher updated to version 1.1.4 (thanks AnderWeb)
General
- New option in the SupSetup Applications
- Added Development (Disabled from SupSetup)
- Added STK sim provider (Disabled from SupSetup)
- Added File Explorer from the SupSetup (Disabled from SupSetup)
- Terminal (Available from SupSetup)
- Added news and weather
- Implemented Flash Player 10.1 (only Nexus)
- Added Google Chrome to Phone. Allows you to launch pages from pc to mobile with one click, after installing the plugin on Google Chrome on your pc.
- Now you can customize the toolbars notifications from the Spare Parts.
- New application for viewing videos.
- Control the music in the lockscreen activated from the Spare Parts
- Many and funny improvements in Spare Parts for the control of the rom.
- You can modify all the colors of the rom including notification bar (text notifications, time and date)
- Now SupSetup applies directly the changing of CPU frequency
- Modified the management of "the force be with you", with better results of suffering sporadic FC's.
- Fixed the problem of always-on Bluetooth from SupSetup
- Implemented LinuxSwap and CompCache, but warning, you can only enable one of the two. If you enable one the other will be disabled automatically (Thanks Tole)
- And many small modifications to control the system.
- Optimized all the apk's png
- Take a look at the new Spare Parts integrated settings.
- Improved management of root
- New Market Management
- Now enabling APNs from SupSetup automatically applies
- Development is disabled from SupSetup
- New options in the Spare Parts that can even choose which applications are installed if not activated Apps2sd (better do not use)
- Wake Unlock & Wake up
- Sound Recorder can record conversations
- Updated Spanish translations
- Added Speech Synthesis (To the voices of the GPS)
- Added provider SIM STK
- Now you can activate and deactivate the JIT from the Spare Parts
- Spare Parts and SupSetup integrated into the rom settings
- Bug fixed contacts and translations
- Redesign of the images of the framework
Applications
- Audio Manager
- Google Apps integrated default
- Maps with GPS 4.5.0
- New Gmail
- Shazam
- AndroidVNC
- Ebuddy
- Facebook
- SupSetup V12
- Twitter
- Wireless Manager
- Wifi status

@superatmel is great, very great. Can't wait.
Sent from my Legend using XDA App

Can I ask why I would want this over say the Cyanogen Mod froyo ROM?
not hating, just asking.
Also is it in English?

I think that is multilingual. This rom includes optimizations from cyanogen, as its author says, and many other of their own. You should try it and if you like it you stay, if not you can restore the previous. Furthermore, this will activate the FM radio in future versions.

wow great news! Finaly something fresh on legend scene! More chefs should work on froyo roms

Good!
thank you I'll try this one as soon as it's available.
PS: GPS does not work in Cyanogen for me, so I hope it's fixed in this one.

hoping that rom is multi language that avail english!

Anyway I think it would not be difficult to add some language support in case that have not english

manudas said:
Furthermore, this will activate the FM radio in future versions.
Click to expand...
Click to collapse
I laughed a lot on this one.
Not that it's impossible and I really wish the devs good luck on btips and that proprietary mess HTC created.

ali ba said:
I laughed a lot on this one.
Not that it's impossible and I really wish the devs good luck on btips and that proprietary mess HTC created.
Click to expand...
Click to collapse
I laugh because he laughed.

Rom is on servers, ready to download!

its huge 85mb... now downloading... after download flashing!!!

How is it?

I can not wait to try it. I'll download it now. Someone who has tried can give us the first impressions and tell us if in addition to Spanish it has English?

Well tried it but all i got was boot loop. It starts but at enter pin the phone reboots.

Same here.
Boot loops on pin code entering.

Did u wipe before flashing? I wanted to flash this rom to, but my SD card started to f*** with me AGAIN. Now trying to backup data and format it, if it would help.

Yes, I did.

same here wiped everything, but no go.

Wiped twice, reboots at the first screen (touch the android logo)...
Google Translate doesn't help much:
This rom installs itself alone, that is completely reconfigures.
WIPE recommend because it has many changes, after installing the rom to let her leave without touching recovery 4 minutes or more exactly because of that time will finish installing everything. Then you can already configure but I recommend you salteis the account settings to skip giving google and once in the launcher and set podreis rom to your liking. This is because otherwise the phone will Autoconnect the market and begin to automatically download all the applications you had installed and it saturates the terminal because it does hit, besides putting the background image that you had prior to the rom and then you ask me that as it is possible that if I install the rom to wipe the bottom appears to me that I had before. In this way you will do a clean install. Then you enter the market and instalais a free application to refresh anyone that you have installed in the terminal and to know that everything went well when you go into shock must appear at least an update of SupSetup I'll post this afternoon to check .
Very attentive to you to do restorations of any kind against the rom or program that you can have problems. (I mean backups, including their own SupSetup least in the section on applications), special attention to restore configuration data of any kind. Under the best not to doubt.
Remember that the installation is at your own risk.
- Added Apps2sd in SupSetup now even allows the deactivation of this without having to WIPE. NEW! Do not be alarmed if you reboot, read the posters !!!!! (Better not use the applications move Froyo)
Apps2sd not activate without at least once you have restarted

Related

[BUILD] **Complete FroYo Bundle** FRX07.1 - Maintenance Release

Figured you TOPA folk needed your own thread... At least to track TOPA-specific issues!
FRX07.1 is here!!
This is a maintenance release - basically taking the newest components to make a completely up-to-date (as of Sept. 1).
Quite a lot has changed since FRX06 - the install process hasn't really, but be sure to read the changelog in the next post and the caveats in post #3!
<<<This is a link to the... FAQ Click it!!>>>​
I have created a complete bundle of FroYo with a stable kernel from GIT (August 19 / 1348), and rootfs from GIT (Sept. 2).
Please, feel free to DONATE to the XDAndroid project!
Every little bit helps!
Directions:
1. Download the full bundle (zip). (Updated September 1 2011)
If instead you just want the system.ext2 (zip) (Updated July 15 2011) file by itself... Don't download this if you're not sure! Grab the full bundle!
2. Extract it. You’ll see a folder, FRX07.1, copy its contents to the root of your SD card. If you want to run Android from a folder instead of all the files on the root of the card, follow the steps below.
3. Go into the STARTUPS folder. Grab the appropriate startup.txt for your device (if you don't know what device you have, you should read the FAQ), and move it to the root of the card (or where you run haret.exe from. If you want to change the location of the build, put a rel_path= statement in the cmdline section of the startup.txt. Mine is located two folders deep on the SD, so my rel_path=Androids/TP2Ref)
4. Screen calibration - you have three choices:
Re-use an old ts-calibration file if you have it and you know it's good.
Download the ts-calibration.zip file and extract it to where you put the rest of the files (root of SD or in a folder - make sure it all stays together!)
Manually calibrate - boot with no ts-calibration file and watch the boot process - you'll be asked to hit 5 points to calibrate the screen. If you have issues calibrating, try an older kernel (1225 works well) Once you have the calibration file hold on to it (make 15 copies if it's a good one ), reboot & go back to the newest kernel!
6. Run haret.exe.. Profit!
Let it settle out on the first boot. Many have reported they had to reboot basically because it was so slow - if you let it sit for about 10 mins so the media scanner can go thru everything, etc. it will be much more pleasurable experience. If you want adb in and watch the processes via top, you'll see why the phone seems so slow - there's lots of background processes cranking because this is the first boot .
Troubleshooting:
Please read the... FAQ
If you have any issues with the kernel, feel free to change it:
There are some devices that are having issues with the newest kernels. Please see the kernel autobuild service to get archived kernels. Once you download a replacement kernel, go to where you run haret.exe from - remove your old zImage/modules-xxxxx.tar.gz. Take the new zImage/modules-xxxxx.tar.gz and replace the old ones, same folder - where you run haret.exe from. Make sure the ‘zImage’ is named just that. Do not rename the modules file, do not extract it - should be in .tar.gz format.
See Incremental Updates for more information on updating the kernel and other components.
Random issues can often be solved by forcing the system to create a new data.img. If you're worried about losing data (all user data is stored in the data.img!!), Titanium Backup works quite well. If you wish, you can rename the data.img to something else, and let the system create a new one - just to see if it resolves your problem.
Similarly, if you wish try formatting your SD card - I prefer to use the HP Tool - do a full format, FAT32.
Even though this build is considered fairly stable, you are more than likely going to run into issues. The next post will address issues particular to this build - PLEASE READ THESE before asking questions! Feel free to post questions in this thread, I will do my best to address them. Big thanks to stinebd for releasing the system image, and of course the other developers for their hard work on making these kernels available.
stinebd's Changelog:​
stinebd said:
Here’s a new release for you, folks. This is a major release with a ton of changes, new features, and fixes. Our friend hyc/highlandsun did most of the heavy lifting for this release. Highlights include a rewritten RIL with support for world phones and greatly improved CDMA support; fixes for the media codecs; fixes for MMS on Sprint; increased security with the Superuser app.
A list of changes is included below. The FRX07 system image is available for download now, and will require the use of a new rootfs image, also available now. Additionally, we have a new bundle containing everything needed to enjoy a full FRX07 system.
Note: Due to the incredibly long list of changes, this is a somewhat condensed, terse changelog describing only the overall scope of the changes.
FRX07:
frameworks/base:
Major frameworks changes for CDMA/GSM dual-mode worldphone support. (hyc)
Fixes for data connection handling to improve startup time. (hyc)
Fixes for wifi handling to avoid issues on hanged drivers. (hyc)
Stagefreight (media codecs) fixes. (hyc/viruscrazy)
Fixes for Sprint’s wonky MMS markup structure. (hyc)
Fix MediaScanner not finding audio files (including ringtones) in system.ext2
hardware/libhardware_legacy:
Minor GPS driver fixes. (Alex[sp3dev])
Rename wifi interfaces to wlan0 on all devices (hyc)
hardware/xdandroid-ril: Major RIL refactoring for improved performance on all devices, and added CDMA/GSM dual-mode worldphone support. (hyc)
packages/apps/Gallery3D: Switched back to Gallery3D as the gallery app (closes bug #111)
packages/apps/Mms: Fixes for Sprint’s wonky MMS markup structure. (hyc)
packages/apps/Phone: Fixes for CDMA/GSM dual-mode worldphone support. (hyc)
packages/apps/Superuser: Added the Superuser package for authorizing su privileges. This, along with our signed builds, provides greatly increased security for the end user (mostly against malicious apps from the Market).
system/extras/su: Added as a dependency for the Superuser package
vendor/qcom/android-open: Include missing stagefright codec symbols. (hyc/viruscrazy)
To coincide with the FRX07 system image, the following rootfs changes have been made:
init.froyo.rc modifications...
Adjust wpa_supplicant service for the new abstraction provided by libhardware_legacy, as well as interface rename
Abstract the hciattach service to provide bluetooth support on both chipsets
Rename wifi interface to wlan0 on all devices
apns-conf.xml updated
keymaps completely reorganized, and RHOD end-call key has been remapped to be the Home key in Android.
default.prop: set ro.secure=1 to lock down the adb shell - su can be used with the Superuser app to authorize root access in adb if needed.
Click to expand...
Click to collapse
Layman's Changelog​
(As in, the changelog I wrote )​
FRX07.1 Changelog:
RHOD - all buttons on the front no longer wake the device. Only the power button wakes the device now.
Updated to the newest RIL
hyc's modified libs for video now baked in - *most* HQ YouTube videos (and other HQ videos) should finally work!
RHOD & TOPA - Userland (Android) now controls the LED by default now. If you need to debug sleep, you will have to change the behavior manually. See Detule's post on this topic.
Facebook sync should now work, out-of-box.
FRX07 Changelog:
Updated RIL (thanks hyc!) - this covers many different bugs that were in the old RIL - I'm only going to cover the major ones...
CDMA now works correctly (for the most part). force_cdma (and north_am_dialing) is now deprecated (not needed/ignored!)
You can boot with a SIM in on a CDMA device and choose your GSM or CDMA on the fly under Settings.
Location based on towers now works on CDMA.
1xRTT now displays correctly, but I never seem to get EVDO Rev.a... I always get 0. This is represented by a 3g icon, as this is what the Android framework provides.
Full MMS support! Please see this page for configuration instructions. Will need help fleshing out the list of carriers folks!
Spotty service, switching towers, etc should no longer cause the dreaded SoD (Sleep of Death) condition!
(Basic audio) 3.5mm support for RHOD400/500
Droidwall works out of the box now
Keyboard backlight now fades in/out
Gallery3D back in! Picasa Web Sync comes with it
A couple new apps added to AndroidApps folder:
rpierce99's app GetLogs
Titanium Backup
Caveats:​
BT - works! But audio doesn't route. See this thread if you're feeling adventurous and want to play with/don't mind using some unstable/incomplete code...
After booting, TOPA seems to have a crippling issue where if the first call is inbound, the phone reboots. So I guess after booting make an outbound call and everything is fine? Someone please confirm...
That audio routing thread is in the RHOD section, and I've only tested it on a RHOD - but AFAIK it should work on other devices. Let me know.
Whew, here you go TOPA folk!
I figured you guys needed a thread for this, if only to track issues that are TOPA-specific. Let me know what I need to add in the caveat section for TOPA! Also let me know if ts-calibration file is good or not .
Also, if you guys already have FRX07 running/working... there's nothing new here. Mainly using this thread as a place for newbie's to go and you experienced folk to help me track issues again for new users!
I have a small problem,when I run haret it comes to animated logo and then my phone go to rebote?
Every time when is starting FRX07 the mobile reboot and start's windows?. Where is the problem?...
kujrv1 said:
Every time when is starting FRX07 the mobile reboot and start's windows?. Where is the problem?...
Click to expand...
Click to collapse
Yes,that's right...
And solution...?
Use the latest kernel and rootfs, not the ones bundled with frx07.
kujrv1 said:
And solution...?
Click to expand...
Click to collapse
kujrv1 said:
Every time when is starting FRX07 the mobile reboot and start's windows?. Where is the problem?...
Click to expand...
Click to collapse
hb5 said:
I have a small problem,when I run haret it comes to animated logo and then my phone go to rebote?
Click to expand...
Click to collapse
Sorry guys grab the latest kernel. I just put that in the caveat list, thanks.
I put the last kernel and i have the same issue. Reboot on Animated logo
I too have the reboot issue on animated start screen. Latest kernel used.
Any suggestions??
last three kernels didn't work on my topa100
it runs haret and then reboot the device
Will you guy's please make an effort and read other posts on this topic instead of clogging up the forum.
Everything you need to know has been posted already, multiple times.
Zaknahhas said:
last three kernels didn't work on my topa100
it runs haret and then reboot the device
Click to expand...
Click to collapse
gtti148 said:
I too have the reboot issue on animated start screen. Latest kernel used.
Any suggestions??
Click to expand...
Click to collapse
kujrv1 said:
I put the last kernel and i have the same issue. Reboot on Animated logo
Click to expand...
Click to collapse
Wait...
zooster said:
Use the latest kernel and rootfs, not the ones bundled with frx07.
Click to expand...
Click to collapse
Seems to make me think it's working on the newest rootfs and kernel - is this not true?
arrrghhh said:
Seems to make me think it's working on the newest rootfs and kernel - is this not true?
Click to expand...
Click to collapse
I've been switching my TOPA to FRX07 + .27 + rootfs (all selfbuilt) yesterday, and it boots up fine since the latest kernel fix.
So anything reported not working with latest autobuild kernel implies user error for me if it resets during bootanimation.
arrrghhh, thanks for taking care of the topa threads! So I can concentrate on not getting anything done for .35
Michael
arrrghhh said:
Wait...
Seems to make me think it's working on the newest rootfs and kernel - is this not true?
Click to expand...
Click to collapse
Topaz can boot with last kernel, with htc-msm-linux @ 20110718_223029 it doesn't.
zooster said:
Topaz can boot with last kernel, with htc-msm-linux @ 20110718_223029 it doesn't.
Click to expand...
Click to collapse
20110718_223029 is the latest kernel tho... are you saying emwe is lying? .
emwe - perhaps you should be like us heathens and try to run the pre-compiled binaries? I know, blasphemy...
Hi to all, is 2 day frx7 work in my topaz all work bt, wifi, 3g, lokscreen, rotate screen (no good) photo, opera, sms, gps an battery when is 10% work 6 hour, is speed. i like use android. thanks

[ROM][ICS][IML74K] teamhacksung's CM9 ALPHA for Vibrant (BUILD 17)

Introduction
Teamhacksung (the rest of them really!) has been porting ICS (to be CM9) for the Galaxy S and they feel that it has reached a state where it would benefit from public testing. However this is still a very early versions and there will be bugs. Bug reports are allowed in this thread only. Please check the known issues section before reporting a bug. The most minor bugs are welcomed (we'd love to know them, but we may not fix them instantly).
Download
ROM: BUILD 17: androtransfer.com / Mediafire
Google Apps: Download from ROM Manager. (Or http://goo-inside.me/gapps/gapps-ics...213-signed.zip)
Google Apps Fixer: MultiUpload / tux-head.net / faramir.eriador.org (md5: af8bcaf5f8158e8e1be7097fc86b6b28)
Google Apps Fixer will fix your problem with not being able to add Google Account or Calendar Sync, but will also reset your Google Apps data. Only flash if you're having problems. If Google Apps Fixer does not work for you, do a factory reset from CWM (or Android Settings) and do not restore system data via TitaniumBackup.
Older Downloads
ROM
Build 16B: Mediafire
Google Apps
v7.1: MultiUpload / tux-head.net / faramir.eriador.org (md5: 8bf66137f18de45657f29c129a8f4d52)
v7: MultiUpload / tux-head.net / faramir.eriador.org (md5: 1888fbb15f36a076cb3908acaf1bd15a)
v6: MultiUpload / tux-head.net / faramir.eriador.org (md5: 6f51ded731d173c31b8c47395ca580b7)
v5.3: MultiUpload / tux-head.net / faramir.eriador.org (md5: e7d69d98a633b646e4f14e6a43208e66)
v5.1: MultiUpload / tux-head.net (thanks! Kaik541) (md5: 87415730a1db2e90d3588bc895f239e5)
v5: MultiUpload (thanks! Kaik541) (md5: 8667c9ddca581a98867fc02db29a2326)
v4: MultiUpload (thanks! Kaik541) (No longer include apps downloadable from Market.) (md5: 8b2dad009bc2f8724d27f78bca162495)
v3: internal
v2: MultiUpload (thanks! koush)
v1: MultiUpload (thanks! koush)
Installation
- First time flashing ICS to your Vibrant (or coming from another ROM)?
Root your device and install ClockworkMod Recovery.
Reboot into Recovery using 3-button-combo
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
WIPE again or Calendar Sync will not work.
- Upgrading from CM7?
Do a Nandroid Backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Coming from onecosmic's ICS build?
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
Reboot into recovery and WIPE (wipe data/factory reset + wipe cache partition)
If radio doesn't work, go back to Samsung ROM and flash from there.
- Upgrading from another build of ICS by teamhacksung?
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
Note: The upgrade process from CM7 to ICS is automatic, but downgrading from ICS to CM7 (or restoring Nandroid) requires flashing twice. Once from ICS and again from CM7's recovery.
Source
Kernel Source: https://github.com/teamhacksung/samsung-kernel-aries
Userspace Source: Patches are being integrated into CM's mainline tree. Device tree is available on teamhacksung's GitHub, but may not be buildable. No support for the source code, do not post that you are not able to build it.
Known Issues
Camera does not support scene modes
Phone unnecessarily gets data connection on device encryption password enter screen.
Cannot format external SD *
Android OS battery usage display higher than normal.
Sometime wrong SMS selected for forwarding
Format internal instead of external SD when requested to format ext. SD
Transfer speed slows down when screen off
Screenshot shutter sound
TV Out using HW-decoding (probably won't be fixed)
Sim Toolkit (probably won't be fixed)
No camera focus mode setting
Compass doesn't work in Google Maps v6
Unable to dial "0001" in some regions
Slow USB transfer speed for some people
Camera still photos problem after recording video
Top of widget selection selector says "Select screen lock"
Note: there are a lot of new options in Settings, but many of them are not implemented yet. DO NOT REPORT THEM AS BUGS. Additionally, some users has reported boot failure after disabling boot animation.
Empty wifi icon when using juice defender / sometimes on boot
Unused bottom bar in landscape dialer
Send contact to voicemail doesn't work
911/E911 is unknown, one report of weirdness
Fixed Issues
BUILD 17
Top of widget selection selector says "Select screen lock" (Upstream fix)
Chrome not working
Various other upstream fixes
BUILD 16
Regression in BUILD 15: Superuser application crashes
Regression in BUILD 15: Data Roaming enabled by default
Back camera does not record geotagging
Camera crashes when changing resolution
New: WM8994 Extensions (aka "Voodoo Sound") is now configurable from DSP Manager
BUILD 15
Duplicate entries in MediaScanner (will only prevent new duplicates, need to clear data to get rid of old duplicates)
Regression in BUILD 14: Screen flicker while turning off
Regression in BUILD 14: adb turns off every reboot
Mute-unmute needed on some calls (hopefully)
Notification power widget uncustomizable (now integrated into Settings)
Reboot into recovery on crash (it will still reboot, just not into recovery)
Unreliable Wi-Fi on screen off (hopefully)
Gallery face glow FCs
BUILD 14
Laggy video recording in low light
"sin" does not work in calculator in Spanish
Laggy playback of some video in .mkv container (same video works in the .mp4 container) (Recommendation: Dice Player from market. Does its own mkv extraction and has hw decoding support)
New Feature: Gamma tuning (equivalent to Voodoo Color's "v1 gamma hack")
BUILD 13
720p Video Recording laggy
No camera zoom
Timelapse video recording crashes
TV Out broken on sleep
TV Out black video
Broken encryption (regression in BUILD 11) (WARNING: users with already encrypted phone will have their data cleared (for real this time))
BUILD 12
Compass, accelerometer broken in certain apps
Random force closes (hopefully)
Missing camera touch to focus (thanks to havlenapetr)
GPS does not work (regression in BUILD 11)
Off-charging does not show progress
/datadata cache not cleared when space is low
Slow mass storage transfer speed
Automatic brightness not working
GApps v7.1
Network location broken
GApps v7
Market purchase broken
BUILD 11
Encryption not working without a data wipe (WARNING: users with already encrypted phone will have their data cleared)
Cannot authenticate new apps for root
Data sometimes get disabled on boot
GApps v6 / Face Unlock v6
Updated: based on IML74K
Face Unlock not working on BUILD 10+
BUILD 10
No hardware composition (but hardware acceleration works)
Video recording does not work.
Video playback is not hardware-accelerated.
The front camera produces distorted preview.
Photo taking does not work with the front camera.
Some camera options FC. (The camera is a temporary hack, when the Nexus S ICS source is released, there will be a proper fix.)
Movie Studio does not work.
WiFi automatically turns on after quitting airplane mode if WiFi was used during airplane mode.
Data Roaming is enabled by default
Can select widget on launcher without being on the widget screen *
GApps v5.3
Updated: Market apk
Removed: unneeded GoogleLatinIME
BUILD 9
WPA Wifi Tethering broken (regression in BUILD 8)
Audio recording by android app crashes (phone calls still work) (regression in BUILD 8)
Phone crashes in landscape with T9 enabled
Reboot to recovery by default even though recovery not selected.
Slow T9 speed
CPU rarely scaling up to 1000 MHz
GMail sometimes fills up /datadata with attachments
BUILD 8
USB Tethering on Windows requires the user go to to driver update and manually select the RNDIS driver.
Sketchy wifi tether (breaks if data connection comes up while tether is active) (it will still error, but you can now re-enable it)
Mounting external SD via USB broke in BUILD 7
Cannot accept many file types via bluetooth
Data activity icon sometimes gets stuck even data is off.
New feature: T9 Dialing by devatwork (Enable in Dialer Setting)
BUILD 7
Cannot encrypt phone after restoring data.
Wi-Fi problems for Iran users
Market download temporarily goes to /datadata
Support for TV Out (in Galaxy S Setting application)
Screen appearing for a split second after screen off animation
BUILD 6
Persistent "Removed SD card" message on external sd card removal.
Missing library for Android Open Accessory
Support for USB Mass Storage (see FAQ)
BUILD 5
VPN does not work
Regression in device encryption
BUILD 4
Large photos cannot be edited.
Missing Live Wallpapers
Bluetooth Reverse Tether does not work
Wi-Fi Direct not supported (it's supported in settings now, but apps are needed to use it as ICS does not come with any use-case for Wi-Fi direct)
Sometimes wifi strength won't show after boot if wifi is enabled. Toggle once to fix. (fixed, hopefully)
GApps v5.1
GApps: Missing TTS libs
GApps v5
GApps: Missing Picasa Sync
GApps: Unable to purchase apps
Build 3
Device encryption does not work. (Note: temporarily broken again in BUILD 4, works on BUILD 5)
User does not have write permission for external sd
A2DP bluetooth headsets do not work.
GApps v4
GApps: More missing libs for GoogleTTS
Build 2
Superuser.apk does not open.
Installer does not work on Samsung ROMs.
Factory reset (from settings menu) does not clear /datadata.
GApps v2
GApps: Missing voice chat, maps, text-to-speech libraries
GApps: Android Keyboard appears twice in Settings.
Frequently Asked Questions
My calendar sync isn't working!
Install the latest build and gapps and gapps fixer. If it still doesn't work, wipe your data.
App X isn't working!
Check the list at http://forum.xda-developers.com/show....php?t=1402210 (unaffiliated with teamhacksung) first and check if it works on other ICS phones. Most likely, it's the application's problem, not ours.
Can I mount the phone as mass storage via USB?
Starting from BUILD12, mass storage is the default configuration (might not apply to existing installations). The below command can be used to change into USB Mass Storage mode. USB Mass Storage mode is always used in recovery.
Code:
setprop persist.sys.usb.config mass_storage,adb
If you want to switch to MTP mode use
Code:
setprop persist.sys.usb.config mtp,adb
Please reboot after executing the command.
I can't adb into the phone!
Please install Nexus S drivers from Google. (Or Galaxy Nexus's driver in MTP mode)
Can I flash other modems?
You may flash modem packages designed for CM7.
How do I take a screenshot?
The screenshot taking function is built into ICS. Hold volume down + power.
Can I use CM7 kernels?
No, the kernel has modifications to make graphics, camera, data counter and data limit work.
Can I disable LED Notification?
Yes. Untick Settings -> Display -> Pulse notification light.
Maps keeps asking me to sign in even though I'm signed in!
Ignore the sign in dialog and pull down the notification menu. Answer the request for permission. Do this a few times and Maps will work.
How do I enter Galaxy S Settings (Device Settings)?
Type "am start com.cyanogenmod.AriesParts/.AriesParts" from adb. Or starting from BUILD 7, it is available as an icon in your launcher.
Is there a Captivate version?
A captivate build from the same source (but with captivate config) is available here.
What's working? Why is there only a list of issues?
Everything else not listed are supposed to be working (aside from the usual CM7 bugs). If they're not listed, please post so that they can be added to the list of issues. A list of issues is far more useful from a development standpoint.
Why am I getting notified that my data partition is getting full when I have 1+ GB free?
Your /datadata partition, a smaller partition, is getting full.
I want to install gazillion apps on my phone and /datadata is too small
Run the following and datadata will no longer be used on next reboot. Your phone might become slower though.
Code:
touch /datadata/.nodatadata
IRC?
#cmsgs on freenode
My adb shell isn't root!
Run "adb root" to restart adb in root mode.
Why is "Android OS" battery usage so high?
It's just a reporting change in ICS. Android OS now includes battery usage from more components than in Gingerbread, the actual battery drain is the same.
What is "Random Offset" during installation?
It's just a harmless message given as a verbose logging due to the new ASLR security feature in ICS. It is not an error.
How do I get the latest version of Rom Manager without market?
If the bundled version doesn't work, update from http://download.clockworkmod.com/rec...RomManager.apk.
I would like feature X
This thread is not the place for it. Submit it to the CM bug tracker once an official RC is released.
Thanks
syndtr: Updated touch and graphics driver
onecosmic: Being the first to successfully build the AOSP tree
Kaik541: GApps from v3 onward
ancdix: For hosting on tux-head.net
nikademus (_renaud_): For hosting on faramir.eriador.org
SysTem-X: For hosting on ics.haxer.org
sixstringsg: For hosting on androtransfer.com
CyanogenMod team: Setting up the infrastructure and being a great help in the porting process.
sixstringsg, TkGlitch, and Skitz: Helping me get GPS going on ICS.
Team ICS Passion: This build uses a gpsd blob they found for their ROM from older versions of CM7.
and everyone else involved in this port or CM7 for SGS.
Reserved. *10 char*
thanks FaultException. was waiting on six to bring us Build 16, going to give it a try later when i get home, thank for this and the good work you are doing on cm7.
thanks will try tomorrow
Thank
Thanks FE and wish you all best.
Thanx man...will flash this.
What is the stock kernel the rom comes with???
krackerjac said:
What is the stock kernel the rom comes with???
Click to expand...
Click to collapse
It's the standard Aries CM kernel.
Thanks again FaultException for your time and effort which I know the Vib community here appreciates it 800% !
Fault Exception is there any way you could committ the yagf2 GPS fix in to this rom. It makes a huge difference in GPS lock speed over stock.
hurtz777 said:
Fault Exception is there any way you could committ the yagf2 GPS fix in to this from. It makes a huge difference in GPS lock speed over stock.
Click to expand...
Click to collapse
The what? You'll have to give me a link.
FaultException said:
The what? You'll have to give me a link.
Click to expand...
Click to collapse
I think this http://forum.xda-developers.com/showpost.php?p=19869399&postcount=1
Yeah that is the link to it. It makes a world of difference on GPS locks and accuracy.
the usual gps problem....
it works good first time...then no more and doesnot go in ds too...
damn vibrant first stock!
daffyno said:
the usual gps problem....
it works good first time...then no more and doesnot go in ds too...
damn vibrant first stock!
Click to expand...
Click to collapse
From what rom you came from.i came from cm7 and ended up in a bootloop..wander what im doing wrong.
Edit* if you end up in a bootloop all you have to do is pullthe battery.enter the clockworkmode useng three button combo.reinstall.done.
Sent from my SGH-T959 using XDA App
daffyno said:
the usual gps problem....
it works good first time...then no more and doesnot go in ds too...
damn vibrant first stock!
Click to expand...
Click to collapse
Can you try using yagf2 + http://forum.xda-developers.com/showpost.php?p=22119563&postcount=80 ?
nuwanmw1988 said:
From what rom you came from.i came from cm7 and ended up in a bootloop..wander what im doing wrong.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
another ics rom
chui101 said:
Can you try using yagf2 + http://forum.xda-developers.com/showpost.php?p=22119563&postcount=80 ?
Click to expand...
Click to collapse
the same...
hurtz777 said:
Yeah that is the link to it. It makes a world of difference on GPS locks and accuracy.
Click to expand...
Click to collapse
I'll look into it. If it does make that much of a difference, and I have permission from the authors, I'll throw it in CM9 and 7.
Dougfresh said:
Thanks again FaultException for your time and effort which I know the Vib community here appreciates it 800% !
Click to expand...
Click to collapse
+1 that's right
Sent from my SGH-T959 using xda premium
chui101 said:
Can you try using yagf2 + http://forum.xda-developers.com/showpost.php?p=22119563&postcount=80 ?
Click to expand...
Click to collapse
If u flash that file it works on this rom. I am using this rom and I flashed the GPS fix and I get a GPS lock.
Sent from my SGH-T959 using XDA App

[INFO][HELP][FIXES][HOW TO] Collection of Help - Info postings for the Nook Color - x

HELP
I've got a problem with my Nook Color (BNRV200)​
Tired of searching for a thread that tells you what to do when you need to install, fix a problem, need a recovery, etc. I have compiled a number of links to various threads by developers and others that answer questions that get asked a lot. This post is intended to give a site that will make finding these answers easier than a regular search. It will have a list of threads and posts with various helps, have a topical list of problems and sites which address those topics, links to common sites and app needed to get what both Noob and seasoned members need to work with and on Nook Colors.
You choose to make changes, flash ROMs, etc. it is your choice. You assume all responsibility for what ever happens. I list these links because I know they have helped and work for me as well as many others. If you need help with a particular problem addressed in these links, ask on those threads.
If you use information in any of these links make sure to click on the thanks button both here and in those links. If you want to write a thank you note also, that to is fine, but does not add to the "Thanks" counter. These people have worked hard for free that we can have greater enjoyment and fun with our tablets. Most get nothing for their time and effort so "thanking them" is their greatest return and the least the rest of us can do in appreciation. Credit and kudos are given by Authors Names in Post #2
By Topic​(A)
Add Network speed to Status Bar. Post#3
Android.process.media force close or crash Click here Also make sure all Google apps are updated, defrost frozen ones, update in play, refreeze (Mine was Gmail) (Thanks bowguy)
(B)
Boot Loop Problems (2)
Bootable CWM Recovery SD (v5.5.0.4 and now v6.0.1.2) (1)
(C)
Change "Status Bar" or "Navigation bar" colors or heights (for two rows of status info). Post#3
Change perceived DPI, rotation behavior, fullscreen, permissions on a per app basis Post#3
(D)
Dual Boot Nook (12)
(F)
Faster bootup
To get faster bootup you can disable the boot animation and save about 30 seconds from boot up time by adding "debug.sf.nobootanimation=1" to the build property file in the /system folder. This is a pain though if you keep up with the nightlies regularly like I do. I got tired of editing the file for every update or reversion if there was a problem with the newer nightly. So I created a script that goes into the Userinit.d folder that checks build.prop on every boot and adds the line if needed without any further intervention. The first boot after installing a new nightly will have the boot animation but no more till the next install when the process will repeat all automatically. Download the AutoNoBootAnimationScript.zip in attached files below, unzip, follow the included instructions and enjoy.
Faster SD card access. Instructions bottom of Post#4
Freeze/Disable applications (1)
(G)
Google Play says, "This app is not available for your device"
Get Xposed Framework in Post#3, download "PlayStore Fixes", set Fake density 240, Check No Restrictions Patch. Clear Google Play Store data, reboot enjoy.
(H)
Home button / icon stopped working, defrost / enable android Keyguard
How can I make my ROM run smoother, have more free memory or have longer battery life. Post#4
How to play flash video on Android 4.4 Kitkat in Dolphin Browser (14)
How to do a Logcat (13)
(I)
I wiped, erased, formated my /ROM (#2) partition (2)
Installing CM11 and get Status error 7 or other problems - Must use CWM 6.0.4.7+ or TWRP 2.6.3.0 (Download below)
Installing new CM11 and latest Gapps and no Google Play. Problem /system is too small.
The Prefered way to fresh install latest nightlies: If you do a conventional (no repartition) install using the smaller 01/05 Gapps and install the other Goople apps through Google play. They install into the /data directory instead of the /system. You can do this also with Gmail, Sound search (ears), Google TTS and Hangouts.
Alternate experimental adventurous way. There are two .zips available that will repartition your Nook and give you more /system space and /Data space.
Dweatons mod of Leapinlarswork, Repart.zip, is here and will yield 1.1Gb /System, 2Gb /Data, and 3.6Gb /Media.
Mine is here and will yield 1.1Gb /System, 4.5Gb /Data, and 1Gb /Media. You must get and use a reformat 5,6,7,8.zip after the running the repartition.zip for dweatons get Leapinlar's here. For mine get it here. the difference is for his you must install with CWM before 6.0.3.6, mine works with 6.0.4.8. Reverts to B&N Stock /system are available here.
Installing CM on EMMC CM11 (8), CM10.2 (9), CM7 or CM10 (6)
Installing CM on SD (3)
(M)
Make Play Store show All apps in listings Post#3
Modifying partition sizes original (5) Modified for CM11 and CWM 6.0.4.8 (15)
More SD card storage Use a 64 Gig SD Micro. Instructions bottom of Post#4
(N)
Nook won't boot (7)
(P)
Put Play Store link in App info window Post#3
(R)
Recovery boot loops (1)
Repairing partitions, blank screens and cannot flash new roms (2)
Restore Nook Color to Stock, (4)
Running Netflix app in CM 10 and 11 (11)
(S)
Screen touch sensitivity a little off. Try Nook Screen Recalibrate in Google Play
SD Card install tips Leapinlar's Tips post #2
Stock Nook Color Roms Leapinlars (1.4.3), Dizzy Dens (1.4.1)
(V)
Video Flicker in CM11 Crackle, Hulu and other video sites and apps, update to CM11 nightly 4/22+ or (10)
Volume / Sound to low. Try Speaker Boost in Google Play. Caution:
Mine works great @ 50% boost. Be very careful above 40%, go slowly and safely. If you want to rename the DSPmanager goto post #6. If you have CM 10.2+ (4.2.1) you must do the renaming since the DSP version since then throttles back the sound levels.
(Y)
YouTube updated and asked for update for Google Play Services but Google play has no update. Get Version 4.2.43 here: (11) (At bottom of attached files) Latest (4/20/2015) New update on Youtube and / or Google Play problems. Solution here: http://forum.xda-developers.com/showpost.php?p=60241045&postcount=54
(W)
Where can I get:Gapps http://wiki.cyanogenmod.org/w/Gapps
Latest Nightlies http://download.cyanogenmod.org/?device=encore&type=nightly
Recoveries (download in attached files below)
Stable versions http://download.cyanogenmod.org/?device=encore&type=stable
Older releases of CM 10 or CM11 http://techerrata.com/browse/cm/encore/nightly​ List of Authors of Post
To whom credits and thanks are due!
See Post (#2)​
If you know of other Help, Info, etc sites post a reply I'll check it out and include it in the lists above. Even if the post are not on Nook Color forum, If it worked for you on your Nook, post a reply with your Rom version and I will check it out and consider adding it to this list.
Recoveries​ The recoveries I have are listed below and can be downloaded in the attached files box. The MD5 sum files are in the MD5 sums for recoveries zip. Download it, un-zip it, and check with the approriate recovery. These are for the Nook Color (BNRV200)
CWM Recoveries3.2.0.1 - Good for CM7 Eyeballer or nemith
5.5.0.4 - Good for CM7 thru CM10.2 Racks
6.0.1.2 - Good for CM7 thru CM10.2 - LeapinLar
6.0.5.0 - Must have for CM11 5-16+ Nightlies eMMC & SDCard installs - polymath257
6.0.5.1 - Latest Available - rjwil1086​TWRP Recoveries2.3.1.0 - From TWRP Site
2.4.1.0 - Eyeballer
2.6.3.0 - Must have for CM11 thru 5-15 nightly (use 2.4.1.0 for pre CM11) - Eyeballer
2.8.3.0 - Must have for CM11 for 5-16+ nightlies - rjwil1086​(nba#+5)
[INFO][HELP][FIXES][HOW TO] Collection of Help - Pt2
By Author of Post​
Dean Gibson
Repartitioning the NC to 1-5 Gb, 2-4Gb and 5-1 Gb: (5) http://forum.xda-developers.com/showthread.php?t=1094371
Eyeballers
Install CM7 or CM10 + Recovery to EMMC: (6) http://forum.xda-developers.com/showthread.php?t=1030227&highlight=install+cm7+to+nook+color
Leapinar
Tips: (1) http://forum.xda-developers.com/showthread.php?p=25354258#post25354258
EMMC Repair: (2) http://forum.xda-developers.com/showthread.php?p=28457126#post28457126
Nook Color Installation Guide for CM7/CM9/CM10/CM10.1/CM10.2/CM11 on SD: (3) http://forum.xda-developers.com/showthread.php?p=32921666#post32921666
nismopc
Running current Crackle TV 4.0.3 on CM11 Nightlies: (10) http://forum.xda-developers.com/showthread.php?t=2634964
Nootered
Restore to Stock: (4) http://forum.xda-developers.com/showthread.php?t=931720&highlight=fix+boot
pastordl
Running current Netflix app in CM 10 and 11: (11) http://forum.xda-developers.com/showthread.php?p=44626173#post44626173
Repartion and reformating zips for CM11 and CWM 6.0.4.8: (15) http://forum.xda-developers.com/showpost.php?p=54401912&postcount=4177 (From Dean Gibson's work, also Leapinlars and Dweaton)
paxChristos
[Tutorial] How To Logcat (13) http://forum.xda-developers.com/showthread.php?t=1726238
RileyGrant
Dummies Guide to Fixing 'My Nook Won't Boot' (7) http://forum.xda-developers.com/showthread.php?t=949699&highlight=boot+zip
Steven676
CyanogenMod 11 Nightly Builds for Nook Color: [Read first three posts]: (8) [FONT=&quot]http://forum.xda-developers.com/showthread.php?t=2629337[/FONT]
surviveland
[Guide][Flash]How to play flash video on Android 4.4 Kitkat - xda-developers (14) http://forum.xda-developers.com/showthread.php?t=2548001
Tausaur
Dual Boot (12) http://forum.xda-developers.com/showthread.php?t=1275859
Tdm
CWM 6.0.4.7 Touch Recovery Ramdisk (http://forum.xda-developers.com/showpost.php?p=51446977&postcount=19015) http://forum.xda-developers.com/showpost.php?p=51446977&postcount=190
Customize Rom or Apps without being a developer - Xposed Framework
Customize Rom or Apps without being a developer - Xposed Framework
From Rovo89's thread
In this thread, I'm presenting a framework which gives you the possibility to modify your ROM - without modifying any APK (developers) or flashing (users)!
Click to expand...
Click to collapse
Get Xposed Framework and install instructions Click on "click to show content" box
For the framework:
Download the Xposed Installer APK and install it
Launch the Xposed Installer, go to the "Framework" section and click on "Install/Update"
Reboot
Done!l
You can verify this by starting the Xposed Installer again. If app_process jumped back to an older version (or none at all), you probably have a ROM with S-On or similar, which reverts any changes to /system after a reboot. Then you can try to flash this file: http://forum.xda-developers.com/show...postcount=2308
For any modules you want to install:
Download <module>.apk and install it
Launch the Xposed Installer and go to the "Modules" section (you will also get there if you click on the notification warning you that the module is not enabled yet)
Enable the module by checking the checkbox
Reboot
Done!
For information & help with Xposed Framework go to Rovo89's thread.
Once you have installed the Xposed Framework you can get many of the modules under the Download tab in the framework app.
There are also a large number of modules at this thread made for module developers to list their work. If the Modules indicate they are made for a specific phone or tablet they may not work on others. If you try and it does not do what it says it will do, contact the module maker, not rovo89, unless it is his module, ie: "Make Play store show all apps" or just un-install the module. No guarantees they will help. Some only have one tablet and only develop for what they have.
A Short list of some of the things you can do using Xposed Framework and modules.
These do all work with CM11 current nightlies and CM 10.2 last nightly, 1/19/14
For more info on Modules listed install Xposed Framework and click on Download tab​
Change color of status bar / notification bar. Xposed Framework - X Blast tools. Plus lot more. By femblack.
Network Speed Indicator - by fatminmin. With 123 below the up down speed can be shown in two readable rows. ** This will not work with CM10.2 Stable with the 3.0.8 Kernel or the updated hack fix kernel
Play Store link in app info - by qwerty12 - Does what the title says
App settings - by Tungstwenty & Rovo89 - What it is: This is an Xposed module that allows changing generic settings on a per-app basis. "Generic settings" means settings that are global to all applications, such as: perceived DPI, rotation behavior, fullscreen, etc..
Play Store Fixes - Rovo89 - Make play store show all apps
Enable SwiftKey predictions in more places - by qwerty12 - Email address website and filter list fields.
123 Dimension Editor. - by Hamzahrmalik - Change various UI dimensions: Status bar height, Navigation bar height and others. I doubled the height of my status bar and shrunk my navigation bar.
Cool Tool: - by Deviant Studio Software - Monitor various system info in floating window or in Status Bar. I have time, day, date, Free Memory and Battery Temp in two rows of my status bar.
Status bar volume. - by Niko001 - Move the volume bar over the status bar.
I do like things my way. That is what Android is noted for.​
This Module "Workaround for Netflix on CM10/CM10.1" works on most any CM10 thru 10.2 Rom.
From Kaepernick's post.
"Well, thanks to Entropy512's help, I was able to modify his Xposed hack to work on CM10 (based on Android 4.1) and CM10.1 (based on Android 4.2) for the Incredible. Using the newest Netflix app and it's working well without issue.
Click to expand...
Click to collapse
Get it here.
*** Make the Xposed Framework persist through a CM ROM update with script "90-xposedpersist.sh" (in the 90-xposedpersist.zip), put the ".sh" file in the /system/addon.d/ folder. Available here See Post #4 there for specifics here***
Image 1. Cyan status bar & navigation bar, network speed indicator & X blast options.
Image 2. Play Store button in app info.
Image 3. App Settings screen.
Image 4. Home screen with dual line expanded status bar, Cool tool info and Net work speed.
Run CM10 & 11 smoother and get more free memory
Tips to help CM10 and CM11 run smoother, less laggy, etc.,
and have more free memory on your Nook Color
and maybe even a little longer battery life.
These are a collection of tips that have been collected from various post in XDA, personal sharing with others, and as a result of my own desire to try to improve things where I can. I have tried everything listed here and each adds a little to smoothness(s), free memory(f) or battery(b) life. My CM11 flashed Nook runs quite smoothly, with free memory at desktop running from 110 to 160 Mb and six to eight hours of battery life depending on type of constant use. This is on a nearly three year old tablet. I have partitions set to 5Gb data and 1Gb media. All apps are in the tablet. I also have a 32Gb Sdcard. I also have over 220 apps including system apps. I use my tablet from 6-8 hours or more a day.​
Unless noted all apps mentioned are available through Google Play. I recommend the apps, etc., because they work for me. I get nothing out of it except the joy of helping others. Like everything try at your own risk. This includes app I have on my Nooks. If you have other programs you can try adjusting them as I have and see how it helps, or not. Trying and finding out what does and doesn't work is half the fun.
Free and simple​
On all CM10 and CM11: (s) Try lowering your maximum clock speed to 1000, or even 800mhz in System, Performance Processor, Maximum CPU frequency. Many have reported improved smoothness at slower speeds. Faster can run ahead of itself and actually make things jittery. Make sure to check Set on boot to retain settings.
CM11: Use 5/17+ nightly.
On all: System Settings ( some may only apply to CM10 or 11 List:
Wifi, advanced,Uncheck Network Notification (b)
Keep Wifi on during Sleep, only when plugged in (b)
Scanning always available, uncheck (b)
Wifi Optimization, checked (b)​Sound,Set quiet hours (your sleep time)(b)
Touch sounds, screen lock sound, volume adjustment sound and Charging Sounds, Enable, all unchecked (b)​DisplaySleep (set time for max time you want screen to stay on before going to sleep, shorter time saves more battery)(b)​Developer Options,Kill app back button, checked, (Allows you to kill kill app by long pressing back button)(b)​Performance,CPU governor, (Lower on list will give faster response but use more battery, Default is "ondemand". Try the others and stick with what suits you the best.) Make sure to check Set on boot to retain settings.​If you haven't activated the "Developer Options list":In "About Tablet, Build Number, tap ten times till it states "Developer Options turn on."​
AdFree: (b) Available on Slideme.com Stops adds in browsers and most all App with add banners. Saves time by not downloading the adds.
On All: ((f,b) Freeze / Disable unused (unusable) apps in System.(b,s,f)
Don't delete them since any ROM update you install will replace them, freezing / disabling them will last through an update. The stock App manager allows you to disable most of these. Titanium Backup and Rom Toolbox Pro can freeze more but do cost, though I think they are well worth the price for what they deliver. There are some free "App freezer" programs available. I've only tried Chef's App Freezer, check the ratings and comments.Android Keyboard (ASOP) - I use Swiftkey (lite is available)
Camera - (No camera in Nook, no need of file)
Com.android.smspush. No phone text.
Gmail and / or Email and Email Services (if you use another E-mail client, ie:K9)
File Manager ( if you uses another ie Root Exporer (Speedsoft) or Root Browser (Jrummy))
Google search - Definately slo-o-ows things down
Key Chain - if you don't use lock screen
Mobile Data and Mobile Network Configuration - No phone, no need
One time Init - only used on first install once
Picasa uploader - If you don't use Picasa
Print Spooler - If you don't use it.
Sound Recorder - No Microphone, no need
Sound Search for Google Play - If you don't use it
Talk back - If you don't use or need it.
Trebuchet - If you use another Launcher.
Voice+ - No Microphone or phone, no need.
If you use a different clock than stock, calendar etc you can freeze / disable the stock version. Example: I use Dejaoffice to link with Outlook on my PC so I freeze Calendar storage, calendar, and calendar sync.​
Change app permissions: (f,b) (for apps that run at startup and then stay in memory even when you not running them.)
I use App settings, it requires Xposed Framework to run but once set up does it's thing in startup, changes permissions, and closes. To get the Xposed Framework go here.
The most common causes of this problem are the following permissions: receive boot completed, vibrate, and wake lock. Not all apps can have these turned of. App settings has the ability to launch the program from is menu. Try turning off a permission, save, menu (launch). If it works great, if not go back and turn that permission back on.
The following is a list of Apps I changed permissions on and which permissions I disabled to keep them from persisting / sticking in memory:Advanced Task Manager: receive boot completed, and wake lock.
Alarm Clock Extreme: read phone state, receive boot completed, vibrate, and wake lock.
BusyBox Installer: receive boot completed, and wake lock.
CPU Master Pro: receive boot completed.
Crackle: receive boot completed, vibrate.
DejaOffice: vibrate.
Elixer: vibrate, and wake lock.
Evernote: receive boot completed, and wake lock.
Google Play Services: receive boot completed, and wake lock.
Kyo-Tux Aeon HD: vibrate.
News and Weather: receive boot completed, and wake lock.
Nook: receive boot completed, vibrate, and wake lock.
Pandora: receive boot completed.
RoboForm: receive boot completed
ROM Manager: receive boot completed, and wake lock.
The Weather Channel: receive boot completed, vibrate.
Titanium Backup: receive boot completed, vibrate.
Winamp: vibrate.
YouTube: receive boot completed, vibrate.​​
Advanced Task Manager: (b,f,s) Put the widget in dock, set your ignore list in app. One press and all unwanted apps go bye-bye.
My Ignore List:
Adfree, Elixer Widget, Alarm Clock Extreme, K-9 mail, Nova Launcher, Swiftkey, Speaker Boost, Pie Pro, Earthquakes, AFWall+, Clipper+, DejaOffice, Tasker, 360 Security.
Not so Simple but worth the time, still free​
Replace DSPManager with Speaker Boost: (f,b) Get more volume and save EMMC memory.(DSPManager 18Mg - Speaker Boost 1.7 Mg=16.3Mg saved) Get more info here.
Replace Trebuchet with Nova Launcher: (s) does more, has more adjustments. (Does take more memory but pays back in smoothness)
LagFix (fstrim) Free. (s) Use two to three times a week. (s,b)
Use Elixer widget to replace other widgets: (f,b) and save Memory 45 meg (for Battery widget, Wifi state and stats widget, free memory and CPU stats) - 12 Meg for Elixer = 33 Emmc memory saved.
Rom toolbox lite: Settings: (f,b,s) (some of these may need Pro)
Under performance.Settings, Main Preferences, Boot Delay, 40 seconds.
Task Manager, Tap on Task Manager on top left of screen.You can change the Minfree memory settings, with CM10 I found strict to work the best. So far with CM 11 custom settings of 30 FA, 40 VA, 65 SS, 75 HA, 90 CP, and 100 EA setting works well.) I set them then save them into custom settings). Make sure to update to 5/17 nightly.
Start up killer, add Elixer, Google play services, The Weather Channel, and YouTube. (keep them out of active (service) memory or minimize there active size.)
Ignore List. 360 security (or your antivirus app), AdFree, AFWall+, Android system, Clipper+, Earthquakes, Elixer Widget, K-9 Mail, Mobile Data, Nova Launcher, Pie Pro, Rom Toolbox Pro, Speaker Boost, System UI, Tasker.​SD Boost. You can change the size of the cache to both internal and external SDcard. I find with my class 4 Sandisk SDcard a setting of 4096KB works best. A benchmark is available to test your settings. If you have a faster card ie: Class 10 you can try larger cache sizes and save as custom. ​
Not Free but worth it (IMHO)​
Upgrade to Nova launcher Prime:
In Nova Settings: (s)
Look and Feel, Scroll and Animation speeds (faster than light) (s)
New Apps - check Auto Add Short cuts, (make sure to turn off auto add in Google Play.)
Labs - Check the following, Big Grid size options, Widget Image Async List, Widget Image Cache, Restore Widgets Faster. (s) ​
Upgrade to Rom Toolbox Pro, LagFix (fstrim) Premium (scheduling trims): Get more bells and whistles and help support the developers.
Upgrade to 32 or 64Gb Class 10 SD card - Buy a 32Gb Class 10 SD card, about $20.00 + ship, prepare as usual and you'll cut your access time to the SD card buy about half. I can do a 2Gb recovery backup in about 5 and 1/2 min. With my Class 4 it takes just shy of 11 minutes.
More Memory Buy a Sandisk 64 Gb Class 10 Micro SD card, about 40.00 + ship, and partition the whole card as one Primary partition, format as FAT32, Sectors/ cluster 32 (16384 bytes) using "MiniTool Partition Wizard Home Edition" available for free here. I have donated to MiniTool since I use it for all kinds of partitioning,(resizing, moving, copy, etc.), on PC's and all kinds of flash memory. I started with the partition set to 30,451.33, copied my data from my 32G sdcard. It worked great and with SD boost set to 4096 all SD access was noticeably faster. So I used Partition Wizard to resize the card to the full capacity, the program changed the size and copied all the files in about 20 minutes. Plugged it into the Nook Color and went from 17 GB free to 47 Gb Free. It is a bit slower than the 32Gb & and the bootloader doesn't list CWM or TWRP recovery kernel or ram on the SD, but oh the storage. I can put over 40, 2 hr AVI or MPEG movies on the card and still have better than 20Gb free.
If you have other Apps, tricks, tweaks that you have tried and found to help. Please reply and I will try them out and list them if they do add to the smoother, longer, freer Nook.​
Netflix on CM11 on SD
Good source of info. Thanks! Confirming that latest Netflix is working on SD. See that thread
If you use Speaker Boost try this to save memory.
Ever since CM7 and Nook Color Tweaks, in has been necessary to find a way to boost the sound output of our little wonder tablet. I tried several an ended up using Speaker Boost. I have found that I no longer need to use DSPmanager. The problem is that freezing or disabling the app doesn't keep it from installing in memory and using 18meg of precious RAM. Renaming the file with.bak extension or deleting it works after a reboot but, if you like to keep up with the nightlies like I do it is re-installed with every update. It gets to be a pain using a file manager to do this every day. So let your Nook do the repetitive work.
So I have worked up three quick and easy ways to rename the file.The best and easiest is the last.
1. Is a Tasker task. This was the first one I used and I setup a widget so I. Can rename with one tap. The.xml file can be imported as a task into Tasker.
2. Is an apk made from the Tasker task. It works the same way just doesn't need Tasker to work.
3. A script file that can run at every boot, check if DSPManager.apk exists, and rename it. This eliminates having to rename it and reboot after every ROM update as it is renamed before the app is loaded. It is only 279 bytes and is the only file that has to remain to work. In the 90RnamDSP scripts.zip below are three files. One that goes into userinit.d folder, an instruction.txt file and an installation script that sets everything in place just by running it.
I want to thank LeapinLar for the help he gave debugging the rename script. This was my first script and had to get everything in proper order and get the syntax correct. What I learned help me build and debug the installation script in a few hours.
Download, unzip, import, install, etc, and enjoy.
Thanks, nice job
Might check the links for the 6.x recovery threads
webyrd said:
Thanks, nice job
Might check the links for the 6.x recovery threads
Click to expand...
Click to collapse
Checked and corrected, Thanks.
pastordl... check pm about a couple of link issues
DizzyDen said:
pastordl... check pm about a couple of link issues
Click to expand...
Click to collapse
Thanks, guess we know where the missing link is.
problem with latest YouTube and Google Play apps not working
For problem with latest YouTube and Google Play apps not working, Go here:
http://forum.xda-developers.com/showpost.php?p=60241045&postcount=54

[Kitkat] CM11 Android 4.4.4 for the Droid X (2015)

[Video] Installing CM11 on the Motorola Droid X (MB810)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Instructions for installing CM11 on Motorola Droid X:
If you're on a custom ROM already (CM, MIUI, LiquidICS, etc.) goto step 6.
Download Droid 2 Recovery Bootstrapper CWM 5.0.2.0,
Framaroot: newer versions may not work Framaroot-1.4.1.apk (XDA) - AFH - RootJunky - Mega -
Framaroot.apk
, twrp_2.7_cm11_dx.zip, latest gapps, and ROM to sdcard from one of the storages: MEGA, Mediafire, GDrive.
On phone: Settings->Applications(Enable Unknown sources)->Development->Enable USB Debugging.
Install Framaroot.apk, launch it and select "Gimli", reboot you're phone.
Install Droid2RecoveryBootstrap_CWM5.0.2.0.apk, launch it, select "Bootstrap Recovery", grant Superuser access and reboot phone.
Reboot phone into CWM Recovery or if you on stock firmware launch Droid X Bootstrapper and press "Reboot Recovery".
In CWM choose wipe data/factory reset (this will completely delete all your data on phone except sdcard), then install zip from sdcard and select twrp_cm11_dx.zip.
Reboot system.
(It's touch) Recovery -> Team Win Recovery.
In TWRP choose Install and select ROM, then slide, then make the same with gapps.
After install press Reboot system.
Additional:
Changelog
If you want to format data and cache partitions to ext4, you'll need to flash data_cache_2ext4.zip. To revert the partitions back to ext3, you'll need to wipe data/factory reset in stock recovery.
In both cases you loose your files on these partitions.​It at a point turns on and off the display and buttons, its not off, be patient.
Upgrading:
Reboot to recovery.
Select "Backup"
Check all boxes that apply, then swipe.
Once finished, go back to the main menu.
Select "Wipe -> Advanced Wipe".
Check all boxes that apply but "sdcard" then swipe.
Return to main menu again.
Select "Install".
Find and select the latest version of the ROM that is saved on your sdcard, then select "Add More Zips" and find the latest version of Gapps that is on your sdcard, swipe.
Select "Reboot System". Enjoy!
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Live support:
If you already have a favorite IRC client: #DROIDX-CM11
If you don't have an IRC client: Webchat.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Supported languages:
Arabic - Egypt (makes a difference!!)
Chinese - China (maybe simplified)
Chinese - Taiwan
Czech - Czech
Danish - Denmark
Dutch - Netherlands
English - U.S, British, Indian
French - France
German - Germany
Hebrew - Israel
Hungarian - Hungary
Italian - Italy
Korean - Korea
Modern Greek - Greece
Polish - Poland
Portuguese - Brazil
Romanian - Romania
Russian - Russia
Spanish - Spain
Swedish - Sweden
Ukrainian - Ukrainian
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Bugs:
Camera Colors are slightly off (slightly blueish)
Hdmi only works with "RealHdmi" app (play store)
Netflix (http://www.androidfilehost.com/?fid=23159073880937064)
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Credit:
@Quarx, @m.ksy, @Aaahh, masterminds
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Preformence Guide:
About phone --> Click Build number 8 times Necessary for the two below
Developer Options --> At the Bottom: Select runtime --> ART (its truely an art)
Performance --> Force high-end graphics(optional)
Aero Control (play store) -->Menu --> CPU Performance --> Govenor Settings --> smartass
Aero Control (play store) --> Menu --> GPU Control --> GPU Control
Aero Control (play store) --> Menu --> Memory Tuning --> Low Memory Option
Aero Control (play store) --> Menu --> Memory Tuning --> IO Scheduler --> deadline
Aero Control (play store) --> Settings --> Reboot check mark...
Clear cache from twrp
Feel free to suggest more, This is what help Preformence tons...
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Links:
Download Recovery and CM and Gapps By m.ksy(Newest, first hand)
https://mega.co.nz/#F!sBZn3aga!dPA6NF1iYnZ8iWQhxIHr0Q
http://www.mediafire.com/?xdk1aolbxo4l3
App:
drive.google.com/folderview?id=0B9uqk9InEzCYWU1uczRlQlo2NGs&usp=sharing
Github
https://github.com/MotoDX-CM11/android
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Updates:
- CM repo sync
- Quarx's repo sync
- fixed BT headset audio
- fixed no digits on clock and ringing alarm screens
- leave only MPEG4 codec for camcorder(again)
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I made a installer app, Why dont you give it a try? (BUGGED ABIT)
XDA:DevDB Information
MotoDX-CM11, ROM for the Motorola Droid X
Contributors
Aaahh, m.ksy, sd_shadow, Aaahh
Source Code: https://github.com/MotoDX-CM11
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 2.6.x
ROM Firmware Required: TWRP 2.6.3.0||2.7.0.0
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 12.26
Stable Release Date: 2014-12-26
Current Beta Version: 09.30
Beta Release Date: 2014-09-30
Created 2014-07-24
Last Updated 2015-12-13
Reserved
Multiple Roms:
We can have two roms in place of recovery but the only other thing that would work is cm11...
Reserved
Lol, rock on!
Sent from my SM-T210R using Tapatalk
Aaahh said:
WE DID IT!!! WE DID IT!!!
Okay i got cm11 to work!!!!
Two zips to flash and an apk!!!
I just GOT IT TO WORK!!!
Um okay install the 621mod cwm5 apk after rootinging with framaroot!
Then Flash my flash.zip
Then flash C11xxxxxxx.zip
BAM!!!!
http://www.youtube.com/watch?v=SBCw4_XgouA&feature=kp
what work and doesnt is uknown it just booted,
IT will BOOTLOOP, THATS NORMAL JUST LEAVE IT THERE FOR LIKE 30MINUTES WITH A ATLEAST 80% BATTERY!!!
Cm11xxxx
https://drive.google.com/file/d/0B9uqk9InEzCYUVZ2TVVlUjd0c1E/edit?usp=sharing
YOU MUST OPEN THE CM11 ZIP AND GOT TO meta/google/android/updater-script AND DELTE THE ASSET!
i'm sorry i'm to distracted testing!
Click to expand...
Click to collapse
Thanks so much Aaahh! You are now my favorite dev!
Sent from my DROIDX using xda app-developers app
---------- Post added at 10:33 PM ---------- Previous post was at 10:30 PM ----------
So delete the file and flash? No gapps? First like!
Sent from my DROIDX using xda app-developers app
---------- Post added at 10:50 PM ---------- Previous post was at 10:33 PM ----------
Bobcus Leper said:
Thanks so much Aaahh! You are now my favorite dev!
Sent from my DROIDX using xda app-developers app
---------- Post added at 10:33 PM ---------- Previous post was at 10:30 PM ----------
So delete the file and flash? No gapps? Or at least the core ones? First like!
Sent from my DROIDX using xda app-developers app
Click to expand...
Click to collapse
Btw i don't see a assets file.
Sent from my DROIDX using xda app-developers app
Changelog
Changelog: This ChangeLog maybe more up to date.
cm-11-20150112-UNOFFICIAL-shadow.zip
fix for SMS/MMS
cm-11-20150111-UNOFFICIAL-shadow.zip
CM repo sync
Quarx's repo sync
removed LockClock, again
fix for SMS/MMS
cm-11-20140914-UNOFFICIAL-shadow
CM repo sync
Quarx's repo sync
add some langs
soft reboot option
submix support
remove egl/hwui props
decrease ro.telephony.call_ring.delay to 50
remove voice quality config (not usable)
restore 300mhz
a lot of powersave fixes for kernel
try to fix random power up after shutdown phone
twrp 2.8.0.0
cm-11-20140817-UNOFFICIAL-shadow
CM repo sync
Quarx's repo sync
minor kernel fixes
cm-11-20140729-UNOFFICIAL-shadow
CM repo sync
Quarx's repo sync
restored powersave and smartass governors
smartass+deadline used as defaults
set min CPU freq to 400 MHz (does not affect the battery)
new freq calculate method for interactive (by Blechd0se)
increase DSP freq to 875 MHz
some fixes for BT HID
fixed some memory leaks
cm-11-20140722-UNOFFICIAL-shadow
CM repo sync
Quarx's repo sync
changes for TWRP (smaller size, selectable true wipe)
enabled ALS (increase screen brightness)
autoswith battery driver for non-original battery
battery life optimization
support BT-keyboards
remove useless binaries
different kernel tweaks
cm-11-20140713-UNOFFICIAL-shadow
CM repo sync
Quarx's repo sync
fixed BT headset audio
fixed no digits on clock and ringing alarm screens
leave only MPEG4 codec for camcorder(again)
cm-11-20140709-UNOFFICIAL-shadow
CM repo sync
Quarx's repo sync
restored cm bootanimation
increased max event limit (better performance)
now use 720p encoder from sources
reduce hwui memory usage
cm-11-20140706-UNOFFICIAL-shadow
CM repo sync
Quarx's repo sync
initial HDMI support (RealHDMI required)
detailed log
cm-11-20140704-UNOFFICIAL-shadow
CM repo sync
Quarx's repo sync
some fixes for kernel
calendar sync with new gapps
detailed log
cm-11-20140620-UNOFFICIAL-shadow
CM repo sync (Android 4.4.4)
Quarx's repo sync
cm-11-20140614-UNOFFICIAL-shadow
CM repo sync (CM Account)
Quarx's repo sync
removed unneeded libs
by default GPU OC disabled
fixed charge only mode
enabled zRam (swap 128mb) (type 'free' in terminal)
some system modules moved to kernel
cm-11-20140607-UNOFFICIAL-shadow
CM repo sync (Android 4.4.3)
Quarx's repo sync
some fixes for system stability
cm-11-20140523-UNOFFICIAL-shadow
CM repo sync (lot of changes)
Quarx's repo sync
add ffmpeg support
cap max CPU frequency to 1 GHz as soon as possible
add Swedish
decrease min_free_kbytes to 10240
JustArchi's ArchiDroid Optimizations V2
prebuilt Google Now with gapps 5-22
better USB OTG support
cm-11-20140509-UNOFFICIAL-shadow
CM repo sync
possible fix for different apn: data, mms (not tested)
fixed com.google.android.location FC (require updated gapps 5-5 or up)
add missed themes settings icons
some rework for camera HAL (for future changes)
add kpanic partition support
custom eri for some carriers (require changed ro.cdma.home.operator.numeric=mccmnc in build.prop)
voicemail number moved into build.prop (ro.cdma.vm.number)
cm-11-20140505-UNOFFICIAL-shadow
CM repo sync
restored SVOX, PicoTts
fixed com.android.incallui FC
freeup ~90 Mb space on system partition
fixed vibration in recovery
disable menu, back and search buttons for wake phone
cm-11-20140502-UNOFFICIAL-shadow
CM repo sync (landscape mode for call UI, etc.)
backported interactive gov from 3.4 kernel (for test)
fixed batt charge counter in recovery
in recovery battery charging support (can be used for battery calibration)
common system cleanup
fix for new version of Netflix
increase min_free_kbytes to 20480
some performance tweaks
returned to the previous wallpaper
cm-11-20140424-UNOFFICIAL-shadow
CM repo sync
fixed GPS
option in BT settings to accept receiving any files
indicate connected headset by icon in statusbar
hide mobile plan (GSM) item in network settings
cm-11-20140422-UNOFFICIAL-shadow
CM repo sync
fixed network modes in data settings (2G(CDMA), 3G(EVDO), auto)
fix for phone randomly turns on after shutdown
deleted Defy's stuff
fix for Netflix
fixed mbm and mbm loader version
proper fix for sensors (accelerometer, etc.)
fix for 143 GPIO (audio) problem
probable fix for OTG reset
fixed kim driver
system stability improvements
cm-11-20140416-UNOFFICIAL-shadow
CM repo sync (new theme engine, etc.)
fix in call audio switching (BT also, but only scratch may hear)
Defy's files cleanup
deleted some GSM stuff
cap battery level at 100%
cm-11-20140410-UNOFFICIAL-shadow
CM repo sync
fix crash on camera close
fix widescreen photo autofocus (6Mp)
cm-11-20140409-UNOFFICIAL-shadow
CM repo sync
fix stuck on reboot
cm-11-20140407-UNOFFICIAL-shadow
CM repo sync
add egl tweaks
Defy Parts -> Additional settings
fix 720p video record (6Mp autofocus broken again)
set high-end graphics enabled by default
increase video quality
removed Stk.apk (SIM toolkit)
no need to reboot before install gapps (3-22 or later)
cm-11-20140331-UNOFFICIAL-shadow
Fixed:
data connection (EvDo, 1xRTT)
New:
changed OC method (Milestone OC)
cm-11-20140329-UNOFFICIAL-shadow
Fixed:
volume buttons for zoom in camera app
unmapped key error
unknown carrier
focus(camera) button sometimes works like back button
cm-11-20140328-UNOFFICIAL-shadow
Fixed:
CDMA
reboots
New:
TWRP Recovery 2.7.0.0
stability improves
cm-11-20140326-UNOFFICIAL-shadow
Fixed:
8Mp photo quality for stock camera
New:
some work to increase battery life
cm-11-20140325-UNOFFICIAL-shadow
Fixed:
Camera
video: 480p
photo: 5M - will be fixed soon
*​cm-11-20140324-UNOFFICIAL-shadow
Fixed:
Torch/led flash
New:
CM repo sync (KK 4.4.2_r2)
Reduce LockClock size (free up some memory on*system partition)
cm-11-20140322-UNOFFICIAL-shadow
Fixed:
Vibration
FM (that I broke in 03.20* :emoji_u1f604
New:
CM repo sync (new wallpaper from them and other things)
Stability improvements
A little closer to make CDMA working (modem detected now, but can't init)
cm-11-20140320-UNOFFICIAL-shadow
Fixed:
Proximity sensor
Inverted compass
cm-11-20140317-UNOFFICIAL-shadow
Fixed:
GPS
Bluetooth
FM Radio
cm-11-20140314-UNOFFICIAL-shadow
Fixed:
safety information in «About phone»
chargeonly mode
bootstrap image directory
proper removal of battery stats
remove export path in logwrapper
New:
more network modes (for future)
permissions for apps
low RAM enabled by default
reduce System app size
some new props in build.prop
cm-11-20140312-UNOFFICIAL-shadow(new)
Fixed:
accelerometer inverted axis
rotation sensor inverted axis
cm-11-20140312-UNOFFICIAL-shadow
Fixed:
screen rotation
cm-11-20140307-UNOFFICIAL-shadow
Fixed:
data mount on system start
-** apps can be installed normally​-** no more wipe data on reboot​
data mount in TWRP recovery
adb in bootmenu (no bootmenu - no problem )
New:
safestrap instead of bootmenu.
cm-11-20140301-UNOFFICIAL-shadow
minor version
latest version with bootmenu
cm-11-20140227-UNOFFICIAL-shadow (deleted)
unstable
data partition mount problem
wipe data after each reboot
So it takes 30 minutes to boot?
Im still sitting here amazed..........thank you Aaahh!!!!! I wish i had my laptop to sbf!!!
Sent from my unicorn themed DROID X running AOKP-Kanged? v2.5
Couldnt find asset either.
Is it inside the updater script?
holy crap! thanks! You're amazing. gonna try this tomorrow
To get the zip to flash, you need to remove the first line in updater-script, starting with "assert". If you use Windows, either use Notepad++, sed, dos2unix, or something to strip out the carriage-return for LF.
I've been following progress on this project for awhile, since page 40 something in the original thread. I'm thankful that my old DX has new life breathed into it!
Edit:
Several apps FC'd on boot. I also noticed that the notification bar was missing for some reason. I attempted to boot into TWRP following that, but it won't work. Hmm. I later discovered that internal storage wasn't mounted at all. Could that be the culprit?
Edit 2:
I did something very experimental: using /etc/init.d, I wrote a command to mount /data. I thought it was a good idea, and my DX did report that it was "upgrading" its apps, but eventually I booted to Trebuchet crashing over and over again. Hopefully something will be figured out in the meantime.
cm-11-20140301-UNOFFICIAL-shadow.zip for testing. ROM that I have built before moving repo sources on to safestrap. asset already deleted. And some screenshots Also, for me data partition mounted automaticaly and I don't got bootloop (system started for a few seconds after installing in twrp) and FC's on system starting.
New CM11: cm-11-20141226-UNOFFICIAL-shadow.zip
For now we can use kernel from Defy, anyway I will continue to keep working on ours own kernel.
USB Host (OTG) is working!! Have connected mouse right now flash drive not detected for some reason
There are links to KitKat Gapps in my list, but I have not test them on this rom
sd_shadow's [Collection] of Links For: Gapps
and TWRP doesn't seem work after flashing CM11, I haven't test but thinking flashing TWRP image right after CM11, (before rebooting) may be a temp fix.
sd_shadow said:
There are links to KitKat Gapps in my list, but I have not test them on this rom
sd_shadow's [Collection] of Links For: Gapps.
Click to expand...
Click to collapse
No free space for gapps on system partition
sd_shadow said:
and TWRP doesn't seem work after flashing CM11, I haven't test but thinking flashing TWRP image right after CM11, (before rebooting) may be a temp fix.
Click to expand...
Click to collapse
don't flash it after CM11, this will format system and left only bootmenu with twrp. I think Aaahh will make another zip with his solution.
upd: Aaahh already corrected update-script, so it don't erase system. Any way bootmenu in CM11 and flash.zip have some different structure, I can not predict the outcome of installing.
Oh my god, you're SERIOUS???? Holy **** man, you guys are amazing, I can't even express how much I appreciate your guys' work! It's time to take my X out of the drawer again!
m.ksy said:
cm-11-20140301-UNOFFICIAL-shadow.zip for testing. ROM that I have built before moving repo sources on to safestrap. asset already deleted. And some screenshots Also, for me data partition mounted automaticaly and I don't got bootloop (system started for a few seconds after installing in twrp) and FC's on system starting.
Click to expand...
Click to collapse
booted in 2mins for me, didn't see any FCs, but didn't have much time to play with it.
Sent from my XT862 using Tapatalk
Aaahh said:
WE DID IT!!! WE DID IT!!!
Okay i got cm11 to work!!!!
Two zips to flash and an apk!!!
I just GOT IT TO WORK!!!
Um okay install the 621mod cwm5 apk after rootinging with framaroot!
Then Flash my flash.zip
Then flash C11xxxxxxx.zip
BAM!!!!
http://www.youtube.com/watch?v=SBCw4_XgouA&feature=kp
what work and doesnt is uknown it just booted,
IT will BOOTLOOP, THATS NORMAL JUST LEAVE IT THERE FOR LIKE 30MINUTES WITH A ATLEAST 80% BATTERY!!!
Cm11xxxx
https://drive.google.com/file/d/0B9uqk9InEzCYUVZ2TVVlUjd0c1E/edit?usp=sharing
YOU MUST OPEN THE CM11 ZIP AND GOT TO meta/google/android/updater-script AND DELTE THE ASSET!
i'm sorry i'm to distracted testing!
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Yeah i didnt explain well,
there are some of bugs like no status bar, and the home button doesnt work...
1. Sbf
2. Root (framaroot)
3. Restart
4. Install "Droid2Bootstrap621MOD.apk"
5. "Install bootstrap" and "Reboot now"
6. Flash "Flash.zip"
7. Restart
8. Click Vol, Down on Blue led
9. Recovery -> Twrp (its touch)
10. Select install and my rom
11. Wait awhile.
12. When done, power off, the green led may stay on, ignore, and after 2min pull battery
13. Turn on.
14. Drink 10 cups of tea, and then return.
15. Come back here and tell me how many bugs you found...
Click to expand...
Click to collapse
m.ksy said:
cm-11-20140301-UNOFFICIAL-shadow.zip for testing. ROM that I have built before moving repo sources on to safestrap. asset already deleted. And some screenshots Also, for me data partition mounted automaticaly and I don't got bootloop (system started for a few seconds after installing in twrp) and FC's on system starting.
Click to expand...
Click to collapse
As one of the members who started and led the campain for KitKat until my laptop failure in early Dec, I must say I am proud of this moment, for us all, and for this device. By achieving this milestone, we, the development community, have once again proven Motorola wrong in their decision to drop support for certain devices, and given this device new life.
I will be testing this out this evening.
Everyone involved in this rock. Majorly impressive.
Sent from my XT875 using Tapatalk 2

[ROM][PEREGRINE][6.0][STOCK]Identity Crisis 6 LTE NoGoogle (updated to 1.2c)

Introduction
This ROM is based on lost101's, kingkaminari's and VitaTaf's work you can find here. The main aim of my modifications is putting debloating to the extreme and getting rid of intrusive Google spying services that violate user's privacy. Before you flash this ROM read all the information below and make sure you still want to do it as some stuff you find essential might be missing and irreplaceble. Please also mind you will have to setup your device manually with ADB to unlock all of its functions.
Disclaimer
Even if everything works 100% fine for me I take no responsibility for anything that happens to anyone else's device after flashing my ROM. If you want to try it, do it on your own risk. Always backup your data.
Description
This is Identity Crisis 6 LTE v1.0a by lost101, kingkaminari and VitaTaf with the following modifications:
Version 1.2c
Changes
Version 1.0
1. build.prop
#USB debugging lock bypass
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
It is advised to remove these lines from build.prop after you're done with setup as they compromise your device's security
2. Removed from system/app:
- BasicDreams
- BookmarkProvider
- Calculator
- CalendarGoogle
- com.motorola.android.setting.diag_mdlog
- DeskClockGoogle
- Exchange3Google
- FaceLock
- FMRadioService
- GoogleContactsSyncAdapter
- HoloSpiralWallpaper
- HTMLViewer
- LatinImeGoogle
- LiveWallpapers
- LiveWallpaperPicker
- NoiseField
- PartnerBookmarksProvider
- PhaseBeam
- Piktures
- PrintSpooler
- UserDictionaryProvider
3. Removed from system/etc/permissions:
- com.google.android.maps.xml
- com.google.android.media.effects.xml
- com.google.widevine.software.drm.xml
- com.motorola.camera.xml
- com.motorola.context.xml
- com.motorola.gallery.xml
- com.motorola.software.fmradioservice.xml
- com.motorola.software.storageoptimizer.xml
4. Removed from system/framework:
- com.google.android.maps.jar
- com.google.android.media.effects.jar
- com.google.widevine.software.drm.jar
- com.motorola.android.dropboxhelper.jar
- com.motorola.gallery.jar
5. Removed from system/priv-app:
- AppDirectedSmsProxy
- atfwd
- AudioEffects
- BackupRestoreConfirmation
- CalendarProvider
- CallLogBackup
- CellBroadcastReceiver
- ConfigUpdater
- Contacts
- ContactsProvider
- CQATest
- EmaraPhoneExtensions
- GmsCore
- GoogleBackupTransport
- GoogleFeedback
- GoogleLoginService
- GoogleOneTimeInitializer
- GooglePartnerSetup
- GoogleServicesFramework
- MotCamera
- MotoOneTimeInitializer
- Phonesky
- PreloadContacts
- SetupWizard
- SetupWizardExt
- StorageOptimizer
- WallpapaerCropper
- WapPushSI
6. Removed from system/usr/srec:
- en-US folder and its files
7. Removed from system/vendor:
- pittpatt folder and its files
8. Added to system/apps:
- AnySoftKeyboard
- MiXplorer
Flashing
1. Boot into TWRP
(2. Backup)
3. Format data (Wipe>Format data>yes)
4. Transfer ROM to SD card/Local storage
5. Wipe>Factory reset
6. Install
7. Reboot
Setup (version 1.0 only)
When the installation completes you'll find there's no Setup Wizard, and some important UI components (Home button, Notifications, Quick Settings) are blocked. There's also no access to Developer's Options. Don't worry - they're normally being unlocked after you're done with Setup Wizard but since it's not there you need to do it manually:
1. Open ADB terminal on your computer
2. Connect your device
3. Execute the following commands:
Code:
adb shell
su
settings put global device_provisioned 1
settings put secure user_setup_complete 1
reboot
After reboot your device is ready to use.
Known issues
- Please refer to IDCrisis 6 LTE original thread
Life after Google
You can try using Micro GmsCore to access Play Store content, and here are some alternatives:
1. Interesting and useful apps in F-Droid store:
- Adaway (system-wide ad blocker)
- AFWall+ (very nice firewall. I use it in whitelist mode because it blocks internet access to all apps by default)
- Etar (calendar. Won't work without Google calendar service and account)
- K-9 mail (bit ugly but awesome mail client)
- Open camera (stock camera replacement)
- Wifi automatic (turns wifi off when you lock the screen which saves battery and improves security. Bugged a little and randomly disables wifi from time to time)
- SMSsecure (messaging app with encryption)
- 920 Editor (text editor)
- Document Viewer (self explanatory)
- Network Log (self explanatory)
2. Other interesting and useful apps around the web (mostly on XDA):
- ApkTrack (app updates tracker),
- Calc+ (calculator),
- CoolTool (CPU and RAM usage and other info display),
- DejaOffice (office app that looks a bit outdated, but it's the only calendar app to work without Google services I found so far),
- Disconnect.me (private web searches; the app FC right after starting it, probably due to lack of Google search services available)
- DriveDroid (turns the phone into Linux live USB),
- ES File Explorer (file explorer),
- Firefox (web browser),
- Gravity Screen (Turning screen off and on without using physical power button),
- Greenify (apps hibernator),
- KWGT (custom widget maker),
- LiveBoot (Chainfire's app that replaces boot animation with system log display),
- maps.me (open source google maps alternative),
- MiXPlorer (file explorer),
- MoboClean (permissions manager),
- Naked Browser (web browser),
- NetGuard (no-root firewall),
- NeutriNote (notes),
- Nova Launcher (launcher)
- Open Camera (same as F-Droid app),
- Parasol (community based permission manager),
- PryFi (WiFi security),
- QuickPic (gallery),
- Recently ("close all apps" button in recents window),
- Recordr (sound recording app),
- Servicely (services management. Think twice before installing and using it - developer's G+ site, developer's APKMirror downloads
- SD Maid (cleaning tool),
- Super Backup (apps, sms, call logs, etc. backup),
- Titanium Backup (data backup),
- True phone (dialer),
- VLC (media player),
- WifiKill (WiFi killer),
- Wifi Protector (WiFi security, anti-wifikill),
- Xposed
You can find more interesting apps and links on this XDA forum
3. Software that may help you secure your device - sufficientlysecure.org
4. More security software - Secure Mobile Apps
5. XDA Labs (alpha version of XDA app store)
6. Firefox browser add-on that lets you download apk files directly from google play store (without Google account connected to your device) in case you can't find desired app anywhere else.
7. Alternative app-stores, .apk mirrors, etc. - use at your own risk. So far I only tried Amazon's store - the pro is that it exists, the cons are that it requires tons of permissions, has very unfriendly interface, takes a lot of space, and the apps you download will only work as long as the store's app is installed.
Credits and thanks
Motorola for making such a good device
Google for supporting Android (but not for invading it with their intrusive services)
lost101, kingkaminari and VitaTaf - creators of original ROM
HootanParsa - creator of MIxplorer
Menny Even Danan and all creators of AnySoftKeyboard
Tesla Coil and all creators of Nova Launcher
Klaus Weidner, creator of Hacker's Keyboard
All people behind TWRP
All the developers who share useful information and solutions in the web
Please let me know if I missed someone, I'll be happy to update this list
Download
IC6_lte_v1.2c_nogoogle.zip
Identity Crisis 6 LTE v1.0a_NoGApps_mod_v.1.0_beta.zip
Version information
Status: stable
Created: 4.03.2016
Updated: 24.05.2016
reserved
reserved 2
Has anyone had success getting this working yet?
I'm having trouble getting this to work.
Yesterday when I tried to install it i got the following error:
"symlink: no of syymlinks failed = 1
Updater process ended with error: 7
Error installing zip file '/sdcard/Identity+Crisis+6+LTE+v1.0a_NoGApps_mod_v.1.0_beta.zip'
Tried again today and managed to get it to install after rebooting recovery a few times, but ended up getting into a bootloop for 40 minutes.
I tried wiping everything, ART cache, system, data, internal and cache, but still get the same, an endless bootloop.
Any ideas?
Edit: This is on an XT1039
cvamoose said:
Has anyone had success getting this working yet?
I'm having trouble getting this to work.
Yesterday when I tried to install it i got the following error:
"symlink: no of syymlinks failed = 1
Updater process ended with error: 7
Error installing zip file '/sdcard/Identity+Crisis+6+LTE+v1.0a_NoGApps_mod_v.1.0_beta.zip'
Tried again today and managed to get it to install after rebooting recovery a few times, but ended up getting into a bootloop for 40 minutes.
I tried wiping everything, ART cache, system, data, internal and cache, but still get the same, an endless bootloop.
Any ideas?
Edit: This is on an XT1039
Click to expand...
Click to collapse
The first issue is internal TWRP error that happens pretty randomly, just restart recovery and it should be gone. The second thing never really happened to me, and I have to ask if you've followed instalation instructions? They're quite strict. You must wipe data and do a factory reset prior to installation. Just try again, following all steps exactly.
I'd also consider waiting a bit for final stable version with error fixes of lost101's ROM I use as a base. It's still kind of WIP.
I'd sure want to try this out, just wondering how well Google Play and Youtube work with the Micro G framework? Those are basicly the only google apps I use.
I could use the browser for youtube, create a link directly to the homescreen maybe. And I probably could survive without the play store to, just download apk from a mirror and sideload, but it would be kind of a hassle.
Anyhow, I probablt wait a few weeks until the MM rom seems stable.
Are you going to update this with the latest MM build by lost101?
baxtex said:
Are you going to update this with the latest MM build by lost101?
Click to expand...
Click to collapse
V1.2 seems stable, so I'll try to build something on this one, but don't really have much free time atm
No worries, just wondering!
Edit: I could actually remove all this stuff myself, the setup should be identical right?
Edit: Here is a version were I removed the same things you did. But I can't get it to work, or rather, I can't setup the phone. As your description says, you need to set it up with adb. But my computer won't detect the phone. I've tried reinstalling drivers here and there but whatever I do, Windows/adb won't detect any device. I do get a beep however that it is connected, and it says something like MTP usb device. But I can't do anything with that. I've tried installing it as an adb device instead but that didn't work.
https://mega.nz/#!P4k1QYwS!fBCp3E4uyjBXy7x6x_uTLTnj3pWjoIbgpqvodzWfEuQ
So I restored my backup, and I can connect to my pc just fine. In the device manager my device is shown as: Android Device>Motorla ADB Interface.
baxtex said:
No worries, just wondering!
Edit: I could actually remove all this stuff myself, the setup should be identical right?
Edit: Here is a version were I removed the same things you did. But I can't get it to work, or rather, I can't setup the phone. As your description says, you need to set it up with adb. But my computer won't detect the phone. I've tried reinstalling drivers here and there but whatever I do, Windows/adb won't detect any device. I do get a beep however that it is connected, and it says something like MTP usb device. But I can't do anything with that. I've tried installing it as an adb device instead but that didn't work.
https://mega.nz/#!P4k1QYwS!fBCp3E4uyjBXy7x6x_uTLTnj3pWjoIbgpqvodzWfEuQ
So I restored my backup, and I can connect to my pc just fine. In the device manager my device is shown as: Android Device>Motorla ADB Interface.
Click to expand...
Click to collapse
I read through IC thread - Lost101 is still polishing it, so I'll wait for some final build. And I guess you've got problem with ADB connection, because you didn't add persistent ADB debug to build.prop, or added but with some dodgy notepad (in Windows use Notepad++) - the lines that need to be added are in the OP.
minimale_ldz said:
Disclaimer
Even if everything works 100% fine for me I take no responsibility for anything that happens to anyone else's device after flashing my ROM. If you want to try it, do it on your own risk. Always backup your data.
Known issues
- Please refer to IDCrisis 6 LTE original thread
Click to expand...
Click to collapse
I have found a bug.
I was setting a lockscreen password that contained = in it and it came up as bad bad characted (I thought it's just a bug because it wouldn't show that error on stock firmware) so I have tried to enter the same password once more and it worked. Then I have locked the phone and couldn't unlock it because I allways entered the wrong password.
I think that the same thing would happen to encrypted devices.
I have found an interesting app that lets you enter permission control settings without root, because these permission settings is hidden in most android versions that came before marshmallow. Not granual, but still better than nothing.
It's size is 7kb, it asks for no permissions, probably because it's just a shortcut to the settings.
To people who don't have Play Store:
Install BlueStacks on your pc.
Root it using King Root.
Install desired apps using Play Store.
Install ES File Explorer:
From panel select:
-Tools/Root Explorer
-Tools/Show hidden files
-Network/Cloud/+/your desired cloud provider and log in.
-Local/Device/data/app .
Select your installed apps and copy them to your drive.
From your Play Store missing device goto your cloud provider website, log in ,download and install your apps.
This method can be long, but you will have all of the apps that you downloaded on cloud so you won't have to do the same process over and over again.
@minimale_ldz since u bought new phone I have to ask - you still remember about Moto G members, right?
I'm not asking when you'll update this rom, but if you're even going to
toster88 said:
@minimale_ldz since u bought new phone I have to ask - you still remember about Moto G members, right?
I'm not asking when you'll update this rom, but if you're even going to
Click to expand...
Click to collapse
It's coming soon
@toster88 motivated me with his comment to spend some time on preparing updated version of this rom. It' based on @lost101's IC6 LTE 1.2c version and contains a few little changes:
- AnySoftKeyboard replaced with Hacker's Keyboard as ASK is a bit awkward when it comes to accesing numeric keys
- MiXplorer has been updated to the newest version (6.4.0)
- Nova Launcher added (sorry for some artifacts like empty folders or Google search box, but I have no idea how to get rid of them)
- persistent ADB debugging removed from build.prop as it's no longer needed. Init.d script deals with initial device provisionig now. /system/etc/init.d/setup can be removed after first boot if everything is working fine (quick settings, home button, developer's options, etc. are accessible).
That's about it, I hope you'll enjoy this build. Please let me know if there are any bugs specific to this rom (and not to MM or IC6 1.2c) as I'm not using XT1039 as a daily driver anymore.
Temporary Google Drive link is now live
alezardstar said:
@minimale_ldz - Can you share with us how did you manage to debloat all the ROM and purge every GApps out of it preserving its stability? Did you delete the apks by hand using your laptop before installing the zip or what did you exactly do? I'm keen to get this working on the very last release (1.5b) for Falcon.
Thanks in advance.
Click to expand...
Click to collapse
You can just unzip the rom and remove unwanted apps (with their folders) by hand in Windows file explorer and then zip it back. Or, if you wanna feel more like a propper dev you can do it with Superr Kitchen where you create custom debloat list. Both methods are confirmed to work. Removing GApps is a bit tricky as you need to remove all of them - if you leave anything it may give you FCs or black screen after boot. You will also have to choose some way to provision the device without GApps and i believe the smoothest method is by init.d script sice it's enabled in @lost101 rom and doesn't require users to do anything after installation. The script looksi like this:
Code:
#!/system/bin/sh
su -c "settings put global device_provisioned 1"
su -c "settings put secure user_setup_complete 1"
and goes in /system/etc/init.d folder
I hope that helps.
alezardstar said:
Thanks for your response. I definitely shall give it a spin with next Identity Crisis release. It happens to me I do not work on Windows, rather GNU/Linux. Do you think I can delete all the OP mentioned apks and on top of that any missed folder/apk appearing on this link using Fedora 25? As far as I could read, the link I'm passing on has Linux instructions, though being honest, I have no leisure time to read it thoroughly and that's why I'm saying I shall do it next Identity's release better. In the meantime, I want to be a hundred percent sure about what I will do when the moment comes in. Can you tell me what provision is? What does it stand for? Should I get a signature spoofer? All I want to do is Identity working as it works itself, with no GApps and supersu working as it's been working always. Although I'd say installing microG may cushion the blow since it is a FLOSS Google framework that will not make things break in a regular use. To sum it up, do I need to create a .txt file or something with the code and thereafter make it work with a init.d script application or something similar?
Thanks for all your help! Looking forward to hear from you and sorry for my late response. Real life keeps me away from my beloved hobbie: learning.
Click to expand...
Click to collapse
I guess it should work pretty much the same on Linux. Do mind I've removed much more than just GApps and today I'd left some more apps in the rom as I found them useful - eg. Calendar Provider or FM radio, but it's up to you. The bare minimum, required to get rid of GApps is:
Code:
/system/app:
- ConfigUpdater
- CalendarGoogle
- GoogleContactsSyncAdapter
/system/priv-app:
- BackupRestoreConfirmation
- GmsCore
- GoogleBackupTransport
- GoogleFeedback
- GoogleLoginService
- GoogleOneTimeInitializer
- GooglePartnerSetup
- GoogleServicesFramework
- MotoOneTimeInitializer
- Phonesky
- SetupWizard
- SetupWizardExt
The list you linked is more extensive and goes deeper into the system but it's quite similair to what I've done. You cane safely remove
Code:
system/usr/srec/en-US/
as it contains speech recognition files that Google Services use to listen to us.
I was careful with
Code:
system/lib/
because I didn't find any source describing what these libraries are actually for. Removing anything with "google" in its name seems safe. You can compare what IDCrisis has with the list and see if it can be removed safely - there's a lot of experimenting involved but the list looks like a good guide.
Code:
system/vendor/pittpatt/
contains face recognition system that I find useless with or without GApps and it can be safely removed.
Now, when you remove all GApps you'll have to provision your device. Long story short is that when you first boot your phone after flashing new rom it will start with Setup Wizard where you'll be asked for wifi password, google account details and where you accept all terms & conditions. By default you're locked in setup mode until it's finished - you can't use home button to escape it, you can't access settings, etc. If you remove GApps there's no Setup Wizard so your phone will stay in setup mode and you need to end it manually. Like I said before, the best way is to use init.d script. Use Notepad to create new file, copy the lines I posted last time, save it without any extension, I believe its permissions need to be set to 755 (rwxrxrx). Place the file in
Code:
system/etc/init.d
and that's it.
Alternatively you can use ADB or terminal emulator to execute these commands:
Code:
adb shell (only if you use ADB)
su
settings put global device_provisioned 1
settings put secure user_setup_complete 1
or you can use XDRsetup app I made to do the job (it needs root to work).
Good luck
alezardstar said:
@minimale_ldz - Apologies for my late answer. I've been busy. Thanks for your response. It is appreciated what you've done for Peregrine's users and hence for everyone who's willing to ditch GApps from @lost101 builds.
At the moment I'm stuck at a step. I'm on Fedora 25 and I want to remove a whole folder within the system /system/app/MagiskManager/ or whatever the directory is and I can not. Albeit I might delete the superuser and Magisk folders whose location is the very first thing we see as we open the .zip, I can't do the same with folders within the system and I wonder why. The other option is extracting the whole content of the ROM in a new directory and deleting files at my will. Thereafter, I can zip it back. The problem is that I do not know how to zip it back. Do you have any idea of somebody who mod on GNU/Linux?
On the other hand, I saw this apk you passed on to make the init.d script work. The simple steps that popped up on my mind were:
- Factory reset.
- Flash ROM + supersu.zip
How can I put your application within the system folders and ensure it'll work as expected? Another thing that I lack knowledge of is the permissions. How can I give a file or a folder permissions on GNU/Linux? There's nothing else I can think of other than wiping everything, flashing the ROM alongside the supersu.zip and booting up but as you told me, I'd be frozen at the first screen. It's strange for me to get ahead but I'm keen to learn and get ahold from you anytime.
Click to expand...
Click to collapse
My knowlege of Linux is pretty much none. I'm using Ubuntu for Superr's Kitchen and that's it. I don't know how different Fedora is from Ubuntu, but Ubuntu interface is very similair to Windows, so never had any problems with simple files operations like unpacking, deleting, etc, and there's always Google at hand with tons of tips and help. Extracting the rom.zip is a good first step, but I'd install the Kitchen - it really makes things esier.
BTW - beside Magisk and Superuser folders there are also apps in /system/app that need to go if you're deleting binaries. They will survive factory reset but won't work. AFAIK they are in lost101's only temporarily and he said he'll use Chainfire's SU in next version anyway.
For setting permissions, as mostly Windows user, I have two solutions - you can either set them in TWRP using its file manager or do it in Android (I'm using MiXplorer for that). You just need to root your rom first.
And you won't be frozen at the first screen if you remove all GApps and SetupWizard apks.
I got almost everything working, but I can't access the Phone via USB from my WIN7 Desktop. It works with adb/fastboot but not as MobileDevice, also it is shown in WIN-Eplorer as XT1072. It did work before I flashed this ROM.
Any advice would be highly appreciated
Thanks in advance
Solved
"Internal Storage not accessible from PC?
With Marshmallow, the default USB connection type is 'Charging only' mode. You can change USB mode to 'MTP' via the pull-down notification option"

Categories

Resources