[Video] Installing CM11 on the Motorola Droid X (MB810)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Instructions for installing CM11 on Motorola Droid X:
If you're on a custom ROM already (CM, MIUI, LiquidICS, etc.) goto step 6.
Download Droid 2 Recovery Bootstrapper CWM 5.0.2.0,
Framaroot: newer versions may not work Framaroot-1.4.1.apk (XDA) - AFH - RootJunky - Mega -
Framaroot.apk
, twrp_2.7_cm11_dx.zip, latest gapps, and ROM to sdcard from one of the storages: MEGA, Mediafire, GDrive.
On phone: Settings->Applications(Enable Unknown sources)->Development->Enable USB Debugging.
Install Framaroot.apk, launch it and select "Gimli", reboot you're phone.
Install Droid2RecoveryBootstrap_CWM5.0.2.0.apk, launch it, select "Bootstrap Recovery", grant Superuser access and reboot phone.
Reboot phone into CWM Recovery or if you on stock firmware launch Droid X Bootstrapper and press "Reboot Recovery".
In CWM choose wipe data/factory reset (this will completely delete all your data on phone except sdcard), then install zip from sdcard and select twrp_cm11_dx.zip.
Reboot system.
(It's touch) Recovery -> Team Win Recovery.
In TWRP choose Install and select ROM, then slide, then make the same with gapps.
After install press Reboot system.
Additional:
Changelog
If you want to format data and cache partitions to ext4, you'll need to flash data_cache_2ext4.zip. To revert the partitions back to ext3, you'll need to wipe data/factory reset in stock recovery.
In both cases you loose your files on these partitions.It at a point turns on and off the display and buttons, its not off, be patient.
Upgrading:
Reboot to recovery.
Select "Backup"
Check all boxes that apply, then swipe.
Once finished, go back to the main menu.
Select "Wipe -> Advanced Wipe".
Check all boxes that apply but "sdcard" then swipe.
Return to main menu again.
Select "Install".
Find and select the latest version of the ROM that is saved on your sdcard, then select "Add More Zips" and find the latest version of Gapps that is on your sdcard, swipe.
Select "Reboot System". Enjoy!
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Live support:
If you already have a favorite IRC client: #DROIDX-CM11
If you don't have an IRC client: Webchat.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Supported languages:
Arabic - Egypt (makes a difference!!)
Chinese - China (maybe simplified)
Chinese - Taiwan
Czech - Czech
Danish - Denmark
Dutch - Netherlands
English - U.S, British, Indian
French - France
German - Germany
Hebrew - Israel
Hungarian - Hungary
Italian - Italy
Korean - Korea
Modern Greek - Greece
Polish - Poland
Portuguese - Brazil
Romanian - Romania
Russian - Russia
Spanish - Spain
Swedish - Sweden
Ukrainian - Ukrainian
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Bugs:
Camera Colors are slightly off (slightly blueish)
Hdmi only works with "RealHdmi" app (play store)
Netflix (http://www.androidfilehost.com/?fid=23159073880937064)
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Credit:
@Quarx, @m.ksy, @Aaahh, masterminds
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Preformence Guide:
About phone --> Click Build number 8 times Necessary for the two below
Developer Options --> At the Bottom: Select runtime --> ART (its truely an art)
Performance --> Force high-end graphics(optional)
Aero Control (play store) -->Menu --> CPU Performance --> Govenor Settings --> smartass
Aero Control (play store) --> Menu --> GPU Control --> GPU Control
Aero Control (play store) --> Menu --> Memory Tuning --> Low Memory Option
Aero Control (play store) --> Menu --> Memory Tuning --> IO Scheduler --> deadline
Aero Control (play store) --> Settings --> Reboot check mark...
Clear cache from twrp
Feel free to suggest more, This is what help Preformence tons...
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Links:
Download Recovery and CM and Gapps By m.ksy(Newest, first hand)
https://mega.co.nz/#F!sBZn3aga!dPA6NF1iYnZ8iWQhxIHr0Q
http://www.mediafire.com/?xdk1aolbxo4l3
App:
drive.google.com/folderview?id=0B9uqk9InEzCYWU1uczRlQlo2NGs&usp=sharing
Github
https://github.com/MotoDX-CM11/android
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Updates:
- CM repo sync
- Quarx's repo sync
- fixed BT headset audio
- fixed no digits on clock and ringing alarm screens
- leave only MPEG4 codec for camcorder(again)
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I made a installer app, Why dont you give it a try? (BUGGED ABIT)
XDA:DevDB Information
MotoDX-CM11, ROM for the Motorola Droid X
Contributors
Aaahh, m.ksy, sd_shadow, Aaahh
Source Code: https://github.com/MotoDX-CM11
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 2.6.x
ROM Firmware Required: TWRP 2.6.3.0||2.7.0.0
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 12.26
Stable Release Date: 2014-12-26
Current Beta Version: 09.30
Beta Release Date: 2014-09-30
Created 2014-07-24
Last Updated 2015-12-13
Reserved
Multiple Roms:
We can have two roms in place of recovery but the only other thing that would work is cm11...
Reserved
Lol, rock on!
Sent from my SM-T210R using Tapatalk
Aaahh said:
WE DID IT!!! WE DID IT!!!
Okay i got cm11 to work!!!!
Two zips to flash and an apk!!!
I just GOT IT TO WORK!!!
Um okay install the 621mod cwm5 apk after rootinging with framaroot!
Then Flash my flash.zip
Then flash C11xxxxxxx.zip
BAM!!!!
http://www.youtube.com/watch?v=SBCw4_XgouA&feature=kp
what work and doesnt is uknown it just booted,
IT will BOOTLOOP, THATS NORMAL JUST LEAVE IT THERE FOR LIKE 30MINUTES WITH A ATLEAST 80% BATTERY!!!
Cm11xxxx
https://drive.google.com/file/d/0B9uqk9InEzCYUVZ2TVVlUjd0c1E/edit?usp=sharing
YOU MUST OPEN THE CM11 ZIP AND GOT TO meta/google/android/updater-script AND DELTE THE ASSET!
i'm sorry i'm to distracted testing!
Click to expand...
Click to collapse
Thanks so much Aaahh! You are now my favorite dev!
Sent from my DROIDX using xda app-developers app
---------- Post added at 10:33 PM ---------- Previous post was at 10:30 PM ----------
So delete the file and flash? No gapps? First like!
Sent from my DROIDX using xda app-developers app
---------- Post added at 10:50 PM ---------- Previous post was at 10:33 PM ----------
Bobcus Leper said:
Thanks so much Aaahh! You are now my favorite dev!
Sent from my DROIDX using xda app-developers app
---------- Post added at 10:33 PM ---------- Previous post was at 10:30 PM ----------
So delete the file and flash? No gapps? Or at least the core ones? First like!
Sent from my DROIDX using xda app-developers app
Click to expand...
Click to collapse
Btw i don't see a assets file.
Sent from my DROIDX using xda app-developers app
Changelog
Changelog: This ChangeLog maybe more up to date.
cm-11-20150112-UNOFFICIAL-shadow.zip
fix for SMS/MMS
cm-11-20150111-UNOFFICIAL-shadow.zip
CM repo sync
Quarx's repo sync
removed LockClock, again
fix for SMS/MMS
cm-11-20140914-UNOFFICIAL-shadow
CM repo sync
Quarx's repo sync
add some langs
soft reboot option
submix support
remove egl/hwui props
decrease ro.telephony.call_ring.delay to 50
remove voice quality config (not usable)
restore 300mhz
a lot of powersave fixes for kernel
try to fix random power up after shutdown phone
twrp 2.8.0.0
cm-11-20140817-UNOFFICIAL-shadow
CM repo sync
Quarx's repo sync
minor kernel fixes
cm-11-20140729-UNOFFICIAL-shadow
CM repo sync
Quarx's repo sync
restored powersave and smartass governors
smartass+deadline used as defaults
set min CPU freq to 400 MHz (does not affect the battery)
new freq calculate method for interactive (by Blechd0se)
increase DSP freq to 875 MHz
some fixes for BT HID
fixed some memory leaks
cm-11-20140722-UNOFFICIAL-shadow
CM repo sync
Quarx's repo sync
changes for TWRP (smaller size, selectable true wipe)
enabled ALS (increase screen brightness)
autoswith battery driver for non-original battery
battery life optimization
support BT-keyboards
remove useless binaries
different kernel tweaks
cm-11-20140713-UNOFFICIAL-shadow
CM repo sync
Quarx's repo sync
fixed BT headset audio
fixed no digits on clock and ringing alarm screens
leave only MPEG4 codec for camcorder(again)
cm-11-20140709-UNOFFICIAL-shadow
CM repo sync
Quarx's repo sync
restored cm bootanimation
increased max event limit (better performance)
now use 720p encoder from sources
reduce hwui memory usage
cm-11-20140706-UNOFFICIAL-shadow
CM repo sync
Quarx's repo sync
initial HDMI support (RealHDMI required)
detailed log
cm-11-20140704-UNOFFICIAL-shadow
CM repo sync
Quarx's repo sync
some fixes for kernel
calendar sync with new gapps
detailed log
cm-11-20140620-UNOFFICIAL-shadow
CM repo sync (Android 4.4.4)
Quarx's repo sync
cm-11-20140614-UNOFFICIAL-shadow
CM repo sync (CM Account)
Quarx's repo sync
removed unneeded libs
by default GPU OC disabled
fixed charge only mode
enabled zRam (swap 128mb) (type 'free' in terminal)
some system modules moved to kernel
cm-11-20140607-UNOFFICIAL-shadow
CM repo sync (Android 4.4.3)
Quarx's repo sync
some fixes for system stability
cm-11-20140523-UNOFFICIAL-shadow
CM repo sync (lot of changes)
Quarx's repo sync
add ffmpeg support
cap max CPU frequency to 1 GHz as soon as possible
add Swedish
decrease min_free_kbytes to 10240
JustArchi's ArchiDroid Optimizations V2
prebuilt Google Now with gapps 5-22
better USB OTG support
cm-11-20140509-UNOFFICIAL-shadow
CM repo sync
possible fix for different apn: data, mms (not tested)
fixed com.google.android.location FC (require updated gapps 5-5 or up)
add missed themes settings icons
some rework for camera HAL (for future changes)
add kpanic partition support
custom eri for some carriers (require changed ro.cdma.home.operator.numeric=mccmnc in build.prop)
voicemail number moved into build.prop (ro.cdma.vm.number)
cm-11-20140505-UNOFFICIAL-shadow
CM repo sync
restored SVOX, PicoTts
fixed com.android.incallui FC
freeup ~90 Mb space on system partition
fixed vibration in recovery
disable menu, back and search buttons for wake phone
cm-11-20140502-UNOFFICIAL-shadow
CM repo sync (landscape mode for call UI, etc.)
backported interactive gov from 3.4 kernel (for test)
fixed batt charge counter in recovery
in recovery battery charging support (can be used for battery calibration)
common system cleanup
fix for new version of Netflix
increase min_free_kbytes to 20480
some performance tweaks
returned to the previous wallpaper
cm-11-20140424-UNOFFICIAL-shadow
CM repo sync
fixed GPS
option in BT settings to accept receiving any files
indicate connected headset by icon in statusbar
hide mobile plan (GSM) item in network settings
cm-11-20140422-UNOFFICIAL-shadow
CM repo sync
fixed network modes in data settings (2G(CDMA), 3G(EVDO), auto)
fix for phone randomly turns on after shutdown
deleted Defy's stuff
fix for Netflix
fixed mbm and mbm loader version
proper fix for sensors (accelerometer, etc.)
fix for 143 GPIO (audio) problem
probable fix for OTG reset
fixed kim driver
system stability improvements
cm-11-20140416-UNOFFICIAL-shadow
CM repo sync (new theme engine, etc.)
fix in call audio switching (BT also, but only scratch may hear)
Defy's files cleanup
deleted some GSM stuff
cap battery level at 100%
cm-11-20140410-UNOFFICIAL-shadow
CM repo sync
fix crash on camera close
fix widescreen photo autofocus (6Mp)
cm-11-20140409-UNOFFICIAL-shadow
CM repo sync
fix stuck on reboot
cm-11-20140407-UNOFFICIAL-shadow
CM repo sync
add egl tweaks
Defy Parts -> Additional settings
fix 720p video record (6Mp autofocus broken again)
set high-end graphics enabled by default
increase video quality
removed Stk.apk (SIM toolkit)
no need to reboot before install gapps (3-22 or later)
cm-11-20140331-UNOFFICIAL-shadow
Fixed:
data connection (EvDo, 1xRTT)
New:
changed OC method (Milestone OC)
cm-11-20140329-UNOFFICIAL-shadow
Fixed:
volume buttons for zoom in camera app
unmapped key error
unknown carrier
focus(camera) button sometimes works like back button
cm-11-20140328-UNOFFICIAL-shadow
Fixed:
CDMA
reboots
New:
TWRP Recovery 2.7.0.0
stability improves
cm-11-20140326-UNOFFICIAL-shadow
Fixed:
8Mp photo quality for stock camera
New:
some work to increase battery life
cm-11-20140325-UNOFFICIAL-shadow
Fixed:
Camera
video: 480p
photo: 5M - will be fixed soon
*cm-11-20140324-UNOFFICIAL-shadow
Fixed:
Torch/led flash
New:
CM repo sync (KK 4.4.2_r2)
Reduce LockClock size (free up some memory on*system partition)
cm-11-20140322-UNOFFICIAL-shadow
Fixed:
Vibration
FM (that I broke in 03.20* :emoji_u1f604
New:
CM repo sync (new wallpaper from them and other things)
Stability improvements
A little closer to make CDMA working (modem detected now, but can't init)
cm-11-20140320-UNOFFICIAL-shadow
Fixed:
Proximity sensor
Inverted compass
cm-11-20140317-UNOFFICIAL-shadow
Fixed:
GPS
Bluetooth
FM Radio
cm-11-20140314-UNOFFICIAL-shadow
Fixed:
safety information in «About phone»
chargeonly mode
bootstrap image directory
proper removal of battery stats
remove export path in logwrapper
New:
more network modes (for future)
permissions for apps
low RAM enabled by default
reduce System app size
some new props in build.prop
cm-11-20140312-UNOFFICIAL-shadow(new)
Fixed:
accelerometer inverted axis
rotation sensor inverted axis
cm-11-20140312-UNOFFICIAL-shadow
Fixed:
screen rotation
cm-11-20140307-UNOFFICIAL-shadow
Fixed:
data mount on system start
-** apps can be installed normally-** no more wipe data on reboot
data mount in TWRP recovery
adb in bootmenu (no bootmenu - no problem )
New:
safestrap instead of bootmenu.
cm-11-20140301-UNOFFICIAL-shadow
minor version
latest version with bootmenu
cm-11-20140227-UNOFFICIAL-shadow (deleted)
unstable
data partition mount problem
wipe data after each reboot
So it takes 30 minutes to boot?
Im still sitting here amazed..........thank you Aaahh!!!!! I wish i had my laptop to sbf!!!
Sent from my unicorn themed DROID X running AOKP-Kanged? v2.5
Couldnt find asset either.
Is it inside the updater script?
holy crap! thanks! You're amazing. gonna try this tomorrow
To get the zip to flash, you need to remove the first line in updater-script, starting with "assert". If you use Windows, either use Notepad++, sed, dos2unix, or something to strip out the carriage-return for LF.
I've been following progress on this project for awhile, since page 40 something in the original thread. I'm thankful that my old DX has new life breathed into it!
Edit:
Several apps FC'd on boot. I also noticed that the notification bar was missing for some reason. I attempted to boot into TWRP following that, but it won't work. Hmm. I later discovered that internal storage wasn't mounted at all. Could that be the culprit?
Edit 2:
I did something very experimental: using /etc/init.d, I wrote a command to mount /data. I thought it was a good idea, and my DX did report that it was "upgrading" its apps, but eventually I booted to Trebuchet crashing over and over again. Hopefully something will be figured out in the meantime.
cm-11-20140301-UNOFFICIAL-shadow.zip for testing. ROM that I have built before moving repo sources on to safestrap. asset already deleted. And some screenshots Also, for me data partition mounted automaticaly and I don't got bootloop (system started for a few seconds after installing in twrp) and FC's on system starting.
New CM11: cm-11-20141226-UNOFFICIAL-shadow.zip
For now we can use kernel from Defy, anyway I will continue to keep working on ours own kernel.
USB Host (OTG) is working!! Have connected mouse right now flash drive not detected for some reason
There are links to KitKat Gapps in my list, but I have not test them on this rom
sd_shadow's [Collection] of Links For: Gapps
and TWRP doesn't seem work after flashing CM11, I haven't test but thinking flashing TWRP image right after CM11, (before rebooting) may be a temp fix.
sd_shadow said:
There are links to KitKat Gapps in my list, but I have not test them on this rom
sd_shadow's [Collection] of Links For: Gapps.
Click to expand...
Click to collapse
No free space for gapps on system partition
sd_shadow said:
and TWRP doesn't seem work after flashing CM11, I haven't test but thinking flashing TWRP image right after CM11, (before rebooting) may be a temp fix.
Click to expand...
Click to collapse
don't flash it after CM11, this will format system and left only bootmenu with twrp. I think Aaahh will make another zip with his solution.
upd: Aaahh already corrected update-script, so it don't erase system. Any way bootmenu in CM11 and flash.zip have some different structure, I can not predict the outcome of installing.
Oh my god, you're SERIOUS???? Holy **** man, you guys are amazing, I can't even express how much I appreciate your guys' work! It's time to take my X out of the drawer again!
m.ksy said:
cm-11-20140301-UNOFFICIAL-shadow.zip for testing. ROM that I have built before moving repo sources on to safestrap. asset already deleted. And some screenshots Also, for me data partition mounted automaticaly and I don't got bootloop (system started for a few seconds after installing in twrp) and FC's on system starting.
Click to expand...
Click to collapse
booted in 2mins for me, didn't see any FCs, but didn't have much time to play with it.
Sent from my XT862 using Tapatalk
Aaahh said:
WE DID IT!!! WE DID IT!!!
Okay i got cm11 to work!!!!
Two zips to flash and an apk!!!
I just GOT IT TO WORK!!!
Um okay install the 621mod cwm5 apk after rootinging with framaroot!
Then Flash my flash.zip
Then flash C11xxxxxxx.zip
BAM!!!!
http://www.youtube.com/watch?v=SBCw4_XgouA&feature=kp
what work and doesnt is uknown it just booted,
IT will BOOTLOOP, THATS NORMAL JUST LEAVE IT THERE FOR LIKE 30MINUTES WITH A ATLEAST 80% BATTERY!!!
Cm11xxxx
https://drive.google.com/file/d/0B9uqk9InEzCYUVZ2TVVlUjd0c1E/edit?usp=sharing
YOU MUST OPEN THE CM11 ZIP AND GOT TO meta/google/android/updater-script AND DELTE THE ASSET!
i'm sorry i'm to distracted testing!
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Yeah i didnt explain well,
there are some of bugs like no status bar, and the home button doesnt work...
1. Sbf
2. Root (framaroot)
3. Restart
4. Install "Droid2Bootstrap621MOD.apk"
5. "Install bootstrap" and "Reboot now"
6. Flash "Flash.zip"
7. Restart
8. Click Vol, Down on Blue led
9. Recovery -> Twrp (its touch)
10. Select install and my rom
11. Wait awhile.
12. When done, power off, the green led may stay on, ignore, and after 2min pull battery
13. Turn on.
14. Drink 10 cups of tea, and then return.
15. Come back here and tell me how many bugs you found...
Click to expand...
Click to collapse
m.ksy said:
cm-11-20140301-UNOFFICIAL-shadow.zip for testing. ROM that I have built before moving repo sources on to safestrap. asset already deleted. And some screenshots Also, for me data partition mounted automaticaly and I don't got bootloop (system started for a few seconds after installing in twrp) and FC's on system starting.
Click to expand...
Click to collapse
As one of the members who started and led the campain for KitKat until my laptop failure in early Dec, I must say I am proud of this moment, for us all, and for this device. By achieving this milestone, we, the development community, have once again proven Motorola wrong in their decision to drop support for certain devices, and given this device new life.
I will be testing this out this evening.
Everyone involved in this rock. Majorly impressive.
Sent from my XT875 using Tapatalk 2
Related
Attention, new stable rom for our legends!
From a Spanish cheff, SuperFroyo MVZ Legend 8
The thread is in Spanish, but you can download the rom from the link "Descarga" in red.
The thread: http://www.movilzona.es/foro/topic2567.html
Thanks to superatmel for his hard work, we finally have an alternative with Froyo in our machines.
EDIT: The rom is working FINE finally right now. Download and test!!
Enjoy this rom from Superatmel
EDIT2: Translation of the first post of the SuperFroyo ROM:
SuperFroyo MVZ 8 for HTC Legend, MovilZona edition
It´s installed from the recovery, as every time you install a ROM. Don't worry if takes a long time to get the first splash. It´s absolutely normal because it executes the config files in the first boot.
Added by manudas: It really reboots twice, the first time for the overlay filesystem, for having read/write access to the system partition.
You must have the Legend rooted. If you don´t know how to do, please search in this forum before asking.
I strongly recommend a full formatting to the SDCARD with three partitions EXT3 512MB / LinuxSwap 64MB and the rest in FAT32. You can do it from the recovery, but remember to save your data before (pics, music, etc…). This is because some directories are created in the sdcard (Android) in which records data I found to negatively affect the rom. PROVEN!
-------------------
WARNING!
This rom autoinstalls itself, and also restarts twice after installation. Ie, reconfigures itself.
WIPE is recommend before the installation, because it has many changes. After installing the rom leave it alone for at least 4 minutes, not touching the screen, because this is the time it takes to finish of installing everything. Then you can setup the rom, but I recommend that you skip the google config, pressing skip button, and once in the launcher you can configure the rom as you like. This is because otherwise the phone will autoconnect to the market, and begin to automatically download all the applications you had installed. Al this can saturate the terminal because it does everything at once. Besides, if the phone connects to the market, background image that you had prior to the rom flashing will be there again, and then you will ask how is possible that after a wipe the bottom appears as you had before.
If you follow my instructions you will do a clean install. Then you should enter the market and install a free application to refresh the applications you have installed in the terminal and to see if everything went well you should go into "Downloads" and see if appears at least an update of SupSetup I'll post this afternoon to check .
Very attentive to you who do restorations of any kind against the rom cause you can have problems. (I mean backups, including their own SupSetup least in the application section). Special attention to restore configuration data of any kind. Under doubt, the best it´s not doing it.
Remember that the installation is at your own risk.
- Added Apps2sd in SupSetup. Now even allows the deactivation of this without having to WIPE. NEW! Do not be alarmed if you reboot, read the posts !!!!! (Better don´t use the applications move feature of Froyo)
Don´t activate Apps2sd without at least once you have restarted
Improvements in this version.
All versions are the same for all terminals
In 8
- SupSetup with integration to Legend
- Implementation of the base for HTC Legend
- Bug fixed Chamber
- HTC Legend Custom Kernel (2.6.29.6 reissued)
- Deactivated perflock for changing CPU frequencies (Only Legend)
- Implemented Swap Legend, not Compcache
- New edition of Framework for all bases (Nexus, Magic, Dream, Legend, Galaxy S)
- Preparation for FM (But not yet available)
In 6.6.4
- On base Froyo FRG83 2.2.1
- Kernel 2.6.35.6 (Nexus One, Magic & Dream)
- Digital retouching (the Chinese muiu)
- More stable Camara
- Google Apps updates
- Etc. ..
In 6.6.2
- New Gmail upgradeable
- New upgradeable Street View
- New way of setting up the internal processes with better results
- New SupSetup V12 14.06
- Edited the rill for a better and stable 3G HSDPA coverage
- Various internal improvements
In 6.6
- New management of the post installation Rom
- New way of SupSetup for disabling applications of the rom (Attention!! Disable is not uninstall)
- New very optimized kernel and removed processes that do not use the Nexus
- New SupSetup V12 v14.00
- New Launcher Pro if activated from the SupSetup configured for higher performance.
- Appear new SupSetup's with more applications to disable!!
- Now install themselves the voices for the GPS
- And more internal improvements for a brutal stability. That if it´s installed with a generous WIPE!
- Adding the Control of energy, I recommend activating the cells that are in the last captures for battery consumption settings, because for example when you turn on wifi automatically pass to 2g for lower battery consumption or you change the data will change also to 2g, or if the wifi is enabled then will activate the sync automatically, etc ...
In 6.4
-Added new option in SupSetup with the direct integration against the system (Optimize the system)
- New setup for the Launcher Pro: to activate it from the SupSetup, go to applications! Important if the Launcher Pro is enabled, for activating the future updates of the market you have to execute the option Optimize system!
- New Shazam
- Rescheduled framework for the implementation of the new option of SupSetup
- Kernel settings
- Adding the Control of energy, I recommend activating the cells that are in the last catch for battery consumption settings.
- Etc ...
In 6.2
- Fix Shazam
- Recompiled the framework to eliminate obsolete processes
- A small graphic touch
- Added black and white bar from the jrosmetamorh. (You must enter the program and select the folder jrosmetamorh / SuperFroyoBNegra or SuperFroyoBBlanca, wait to finish installing and reboot).
- Set some xml framework
- New icon of the battery.
- Various internal improvements
- This rom is very stable.
In 6.1
- All Cyano improvements
- Fix for flash player to install without Wipe (Nexus only)
- Improved 3D Gallery
- New ADWLauncher 1.1.5
- SupSetup V12 12.94
- Updated all apps
- Added icon headphones
- New kernel 2.6.34.5
- And as always own improvements
In 6.0
- Fixed a bug in the CPU frequency
- Fixed issue with FlashPlayer, if it does not work, apply "the force be with you" from the SupSetup, and wait to restart. (Solo Nexus)
- Fixed problem with Speech Sinthesis.
- Edited the battery again to display up to 100% load
- Revert SoundRecorder
- Added Series for Android
- Optimized Kernel for lower consumption. (Removed unused drivers)
- And besides of my optimizations, all from Cyanogen too
In 4.4
- Added restart in normal mode, recovery and bootloader
- Enabled again hsdpa
- Fixed bug in the battery icon
- New Wallpaper.apk
- New sounds and notifications in addition to integrating the lock & unlock from Iphone
- Many of internal improvements in the libraries
- Camera with manual focus touching the screen.
- Added Launcher Pro activating it from the SupSetup (applications menu)
- Added File Explorer activating it from the SupSetup (applications menu)
- ADWLauncher updated to version 1.1.4 (thanks AnderWeb)
General
- New option in the SupSetup Applications
- Added Development (Disabled from SupSetup)
- Added STK sim provider (Disabled from SupSetup)
- Added File Explorer from the SupSetup (Disabled from SupSetup)
- Terminal (Available from SupSetup)
- Added news and weather
- Implemented Flash Player 10.1 (only Nexus)
- Added Google Chrome to Phone. Allows you to launch pages from pc to mobile with one click, after installing the plugin on Google Chrome on your pc.
- Now you can customize the toolbars notifications from the Spare Parts.
- New application for viewing videos.
- Control the music in the lockscreen activated from the Spare Parts
- Many and funny improvements in Spare Parts for the control of the rom.
- You can modify all the colors of the rom including notification bar (text notifications, time and date)
- Now SupSetup applies directly the changing of CPU frequency
- Modified the management of "the force be with you", with better results of suffering sporadic FC's.
- Fixed the problem of always-on Bluetooth from SupSetup
- Implemented LinuxSwap and CompCache, but warning, you can only enable one of the two. If you enable one the other will be disabled automatically (Thanks Tole)
- And many small modifications to control the system.
- Optimized all the apk's png
- Take a look at the new Spare Parts integrated settings.
- Improved management of root
- New Market Management
- Now enabling APNs from SupSetup automatically applies
- Development is disabled from SupSetup
- New options in the Spare Parts that can even choose which applications are installed if not activated Apps2sd (better do not use)
- Wake Unlock & Wake up
- Sound Recorder can record conversations
- Updated Spanish translations
- Added Speech Synthesis (To the voices of the GPS)
- Added provider SIM STK
- Now you can activate and deactivate the JIT from the Spare Parts
- Spare Parts and SupSetup integrated into the rom settings
- Bug fixed contacts and translations
- Redesign of the images of the framework
Applications
- Audio Manager
- Google Apps integrated default
- Maps with GPS 4.5.0
- New Gmail
- Shazam
- AndroidVNC
- Ebuddy
- Facebook
- SupSetup V12
- Twitter
- Wireless Manager
- Wifi status
@superatmel is great, very great. Can't wait.
Sent from my Legend using XDA App
Can I ask why I would want this over say the Cyanogen Mod froyo ROM?
not hating, just asking.
Also is it in English?
I think that is multilingual. This rom includes optimizations from cyanogen, as its author says, and many other of their own. You should try it and if you like it you stay, if not you can restore the previous. Furthermore, this will activate the FM radio in future versions.
wow great news! Finaly something fresh on legend scene! More chefs should work on froyo roms
Good!
thank you I'll try this one as soon as it's available.
PS: GPS does not work in Cyanogen for me, so I hope it's fixed in this one.
hoping that rom is multi language that avail english!
Anyway I think it would not be difficult to add some language support in case that have not english
manudas said:
Furthermore, this will activate the FM radio in future versions.
Click to expand...
Click to collapse
I laughed a lot on this one.
Not that it's impossible and I really wish the devs good luck on btips and that proprietary mess HTC created.
ali ba said:
I laughed a lot on this one.
Not that it's impossible and I really wish the devs good luck on btips and that proprietary mess HTC created.
Click to expand...
Click to collapse
I laugh because he laughed.
Rom is on servers, ready to download!
its huge 85mb... now downloading... after download flashing!!!
How is it?
I can not wait to try it. I'll download it now. Someone who has tried can give us the first impressions and tell us if in addition to Spanish it has English?
Well tried it but all i got was boot loop. It starts but at enter pin the phone reboots.
Same here.
Boot loops on pin code entering.
Did u wipe before flashing? I wanted to flash this rom to, but my SD card started to f*** with me AGAIN. Now trying to backup data and format it, if it would help.
Yes, I did.
same here wiped everything, but no go.
Wiped twice, reboots at the first screen (touch the android logo)...
Google Translate doesn't help much:
This rom installs itself alone, that is completely reconfigures.
WIPE recommend because it has many changes, after installing the rom to let her leave without touching recovery 4 minutes or more exactly because of that time will finish installing everything. Then you can already configure but I recommend you salteis the account settings to skip giving google and once in the launcher and set podreis rom to your liking. This is because otherwise the phone will Autoconnect the market and begin to automatically download all the applications you had installed and it saturates the terminal because it does hit, besides putting the background image that you had prior to the rom and then you ask me that as it is possible that if I install the rom to wipe the bottom appears to me that I had before. In this way you will do a clean install. Then you enter the market and instalais a free application to refresh anyone that you have installed in the terminal and to know that everything went well when you go into shock must appear at least an update of SupSetup I'll post this afternoon to check .
Very attentive to you to do restorations of any kind against the rom or program that you can have problems. (I mean backups, including their own SupSetup least in the section on applications), special attention to restore configuration data of any kind. Under the best not to doubt.
Remember that the installation is at your own risk.
- Added Apps2sd in SupSetup now even allows the deactivation of this without having to WIPE. NEW! Do not be alarmed if you reboot, read the posters !!!!! (Better not use the applications move Froyo)
Apps2sd not activate without at least once you have restarted
Introduction
Teamhacksung (the rest of them really!) has been porting ICS (to be CM9) for the Galaxy S and they feel that it has reached a state where it would benefit from public testing. However this is still a very early versions and there will be bugs. Bug reports are allowed in this thread only. Please check the known issues section before reporting a bug. The most minor bugs are welcomed (we'd love to know them, but we may not fix them instantly).
Download
ROM: BUILD 17: androtransfer.com / Mediafire
Google Apps: Download from ROM Manager. (Or http://goo-inside.me/gapps/gapps-ics...213-signed.zip)
Google Apps Fixer: MultiUpload / tux-head.net / faramir.eriador.org (md5: af8bcaf5f8158e8e1be7097fc86b6b28)
Google Apps Fixer will fix your problem with not being able to add Google Account or Calendar Sync, but will also reset your Google Apps data. Only flash if you're having problems. If Google Apps Fixer does not work for you, do a factory reset from CWM (or Android Settings) and do not restore system data via TitaniumBackup.
Older Downloads
ROM
Build 16B: Mediafire
Google Apps
v7.1: MultiUpload / tux-head.net / faramir.eriador.org (md5: 8bf66137f18de45657f29c129a8f4d52)
v7: MultiUpload / tux-head.net / faramir.eriador.org (md5: 1888fbb15f36a076cb3908acaf1bd15a)
v6: MultiUpload / tux-head.net / faramir.eriador.org (md5: 6f51ded731d173c31b8c47395ca580b7)
v5.3: MultiUpload / tux-head.net / faramir.eriador.org (md5: e7d69d98a633b646e4f14e6a43208e66)
v5.1: MultiUpload / tux-head.net (thanks! Kaik541) (md5: 87415730a1db2e90d3588bc895f239e5)
v5: MultiUpload (thanks! Kaik541) (md5: 8667c9ddca581a98867fc02db29a2326)
v4: MultiUpload (thanks! Kaik541) (No longer include apps downloadable from Market.) (md5: 8b2dad009bc2f8724d27f78bca162495)
v3: internal
v2: MultiUpload (thanks! koush)
v1: MultiUpload (thanks! koush)
Installation
- First time flashing ICS to your Vibrant (or coming from another ROM)?
Root your device and install ClockworkMod Recovery.
Reboot into Recovery using 3-button-combo
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
WIPE again or Calendar Sync will not work.
- Upgrading from CM7?
Do a Nandroid Backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Coming from onecosmic's ICS build?
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
Reboot into recovery and WIPE (wipe data/factory reset + wipe cache partition)
If radio doesn't work, go back to Samsung ROM and flash from there.
- Upgrading from another build of ICS by teamhacksung?
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
Note: The upgrade process from CM7 to ICS is automatic, but downgrading from ICS to CM7 (or restoring Nandroid) requires flashing twice. Once from ICS and again from CM7's recovery.
Source
Kernel Source: https://github.com/teamhacksung/samsung-kernel-aries
Userspace Source: Patches are being integrated into CM's mainline tree. Device tree is available on teamhacksung's GitHub, but may not be buildable. No support for the source code, do not post that you are not able to build it.
Known Issues
Camera does not support scene modes
Phone unnecessarily gets data connection on device encryption password enter screen.
Cannot format external SD *
Android OS battery usage display higher than normal.
Sometime wrong SMS selected for forwarding
Format internal instead of external SD when requested to format ext. SD
Transfer speed slows down when screen off
Screenshot shutter sound
TV Out using HW-decoding (probably won't be fixed)
Sim Toolkit (probably won't be fixed)
No camera focus mode setting
Compass doesn't work in Google Maps v6
Unable to dial "0001" in some regions
Slow USB transfer speed for some people
Camera still photos problem after recording video
Top of widget selection selector says "Select screen lock"
Note: there are a lot of new options in Settings, but many of them are not implemented yet. DO NOT REPORT THEM AS BUGS. Additionally, some users has reported boot failure after disabling boot animation.
Empty wifi icon when using juice defender / sometimes on boot
Unused bottom bar in landscape dialer
Send contact to voicemail doesn't work
911/E911 is unknown, one report of weirdness
Fixed Issues
BUILD 17
Top of widget selection selector says "Select screen lock" (Upstream fix)
Chrome not working
Various other upstream fixes
BUILD 16
Regression in BUILD 15: Superuser application crashes
Regression in BUILD 15: Data Roaming enabled by default
Back camera does not record geotagging
Camera crashes when changing resolution
New: WM8994 Extensions (aka "Voodoo Sound") is now configurable from DSP Manager
BUILD 15
Duplicate entries in MediaScanner (will only prevent new duplicates, need to clear data to get rid of old duplicates)
Regression in BUILD 14: Screen flicker while turning off
Regression in BUILD 14: adb turns off every reboot
Mute-unmute needed on some calls (hopefully)
Notification power widget uncustomizable (now integrated into Settings)
Reboot into recovery on crash (it will still reboot, just not into recovery)
Unreliable Wi-Fi on screen off (hopefully)
Gallery face glow FCs
BUILD 14
Laggy video recording in low light
"sin" does not work in calculator in Spanish
Laggy playback of some video in .mkv container (same video works in the .mp4 container) (Recommendation: Dice Player from market. Does its own mkv extraction and has hw decoding support)
New Feature: Gamma tuning (equivalent to Voodoo Color's "v1 gamma hack")
BUILD 13
720p Video Recording laggy
No camera zoom
Timelapse video recording crashes
TV Out broken on sleep
TV Out black video
Broken encryption (regression in BUILD 11) (WARNING: users with already encrypted phone will have their data cleared (for real this time))
BUILD 12
Compass, accelerometer broken in certain apps
Random force closes (hopefully)
Missing camera touch to focus (thanks to havlenapetr)
GPS does not work (regression in BUILD 11)
Off-charging does not show progress
/datadata cache not cleared when space is low
Slow mass storage transfer speed
Automatic brightness not working
GApps v7.1
Network location broken
GApps v7
Market purchase broken
BUILD 11
Encryption not working without a data wipe (WARNING: users with already encrypted phone will have their data cleared)
Cannot authenticate new apps for root
Data sometimes get disabled on boot
GApps v6 / Face Unlock v6
Updated: based on IML74K
Face Unlock not working on BUILD 10+
BUILD 10
No hardware composition (but hardware acceleration works)
Video recording does not work.
Video playback is not hardware-accelerated.
The front camera produces distorted preview.
Photo taking does not work with the front camera.
Some camera options FC. (The camera is a temporary hack, when the Nexus S ICS source is released, there will be a proper fix.)
Movie Studio does not work.
WiFi automatically turns on after quitting airplane mode if WiFi was used during airplane mode.
Data Roaming is enabled by default
Can select widget on launcher without being on the widget screen *
GApps v5.3
Updated: Market apk
Removed: unneeded GoogleLatinIME
BUILD 9
WPA Wifi Tethering broken (regression in BUILD 8)
Audio recording by android app crashes (phone calls still work) (regression in BUILD 8)
Phone crashes in landscape with T9 enabled
Reboot to recovery by default even though recovery not selected.
Slow T9 speed
CPU rarely scaling up to 1000 MHz
GMail sometimes fills up /datadata with attachments
BUILD 8
USB Tethering on Windows requires the user go to to driver update and manually select the RNDIS driver.
Sketchy wifi tether (breaks if data connection comes up while tether is active) (it will still error, but you can now re-enable it)
Mounting external SD via USB broke in BUILD 7
Cannot accept many file types via bluetooth
Data activity icon sometimes gets stuck even data is off.
New feature: T9 Dialing by devatwork (Enable in Dialer Setting)
BUILD 7
Cannot encrypt phone after restoring data.
Wi-Fi problems for Iran users
Market download temporarily goes to /datadata
Support for TV Out (in Galaxy S Setting application)
Screen appearing for a split second after screen off animation
BUILD 6
Persistent "Removed SD card" message on external sd card removal.
Missing library for Android Open Accessory
Support for USB Mass Storage (see FAQ)
BUILD 5
VPN does not work
Regression in device encryption
BUILD 4
Large photos cannot be edited.
Missing Live Wallpapers
Bluetooth Reverse Tether does not work
Wi-Fi Direct not supported (it's supported in settings now, but apps are needed to use it as ICS does not come with any use-case for Wi-Fi direct)
Sometimes wifi strength won't show after boot if wifi is enabled. Toggle once to fix. (fixed, hopefully)
GApps v5.1
GApps: Missing TTS libs
GApps v5
GApps: Missing Picasa Sync
GApps: Unable to purchase apps
Build 3
Device encryption does not work. (Note: temporarily broken again in BUILD 4, works on BUILD 5)
User does not have write permission for external sd
A2DP bluetooth headsets do not work.
GApps v4
GApps: More missing libs for GoogleTTS
Build 2
Superuser.apk does not open.
Installer does not work on Samsung ROMs.
Factory reset (from settings menu) does not clear /datadata.
GApps v2
GApps: Missing voice chat, maps, text-to-speech libraries
GApps: Android Keyboard appears twice in Settings.
Frequently Asked Questions
My calendar sync isn't working!
Install the latest build and gapps and gapps fixer. If it still doesn't work, wipe your data.
App X isn't working!
Check the list at http://forum.xda-developers.com/show....php?t=1402210 (unaffiliated with teamhacksung) first and check if it works on other ICS phones. Most likely, it's the application's problem, not ours.
Can I mount the phone as mass storage via USB?
Starting from BUILD12, mass storage is the default configuration (might not apply to existing installations). The below command can be used to change into USB Mass Storage mode. USB Mass Storage mode is always used in recovery.
Code:
setprop persist.sys.usb.config mass_storage,adb
If you want to switch to MTP mode use
Code:
setprop persist.sys.usb.config mtp,adb
Please reboot after executing the command.
I can't adb into the phone!
Please install Nexus S drivers from Google. (Or Galaxy Nexus's driver in MTP mode)
Can I flash other modems?
You may flash modem packages designed for CM7.
How do I take a screenshot?
The screenshot taking function is built into ICS. Hold volume down + power.
Can I use CM7 kernels?
No, the kernel has modifications to make graphics, camera, data counter and data limit work.
Can I disable LED Notification?
Yes. Untick Settings -> Display -> Pulse notification light.
Maps keeps asking me to sign in even though I'm signed in!
Ignore the sign in dialog and pull down the notification menu. Answer the request for permission. Do this a few times and Maps will work.
How do I enter Galaxy S Settings (Device Settings)?
Type "am start com.cyanogenmod.AriesParts/.AriesParts" from adb. Or starting from BUILD 7, it is available as an icon in your launcher.
Is there a Captivate version?
A captivate build from the same source (but with captivate config) is available here.
What's working? Why is there only a list of issues?
Everything else not listed are supposed to be working (aside from the usual CM7 bugs). If they're not listed, please post so that they can be added to the list of issues. A list of issues is far more useful from a development standpoint.
Why am I getting notified that my data partition is getting full when I have 1+ GB free?
Your /datadata partition, a smaller partition, is getting full.
I want to install gazillion apps on my phone and /datadata is too small
Run the following and datadata will no longer be used on next reboot. Your phone might become slower though.
Code:
touch /datadata/.nodatadata
IRC?
#cmsgs on freenode
My adb shell isn't root!
Run "adb root" to restart adb in root mode.
Why is "Android OS" battery usage so high?
It's just a reporting change in ICS. Android OS now includes battery usage from more components than in Gingerbread, the actual battery drain is the same.
What is "Random Offset" during installation?
It's just a harmless message given as a verbose logging due to the new ASLR security feature in ICS. It is not an error.
How do I get the latest version of Rom Manager without market?
If the bundled version doesn't work, update from http://download.clockworkmod.com/rec...RomManager.apk.
I would like feature X
This thread is not the place for it. Submit it to the CM bug tracker once an official RC is released.
Thanks
syndtr: Updated touch and graphics driver
onecosmic: Being the first to successfully build the AOSP tree
Kaik541: GApps from v3 onward
ancdix: For hosting on tux-head.net
nikademus (_renaud_): For hosting on faramir.eriador.org
SysTem-X: For hosting on ics.haxer.org
sixstringsg: For hosting on androtransfer.com
CyanogenMod team: Setting up the infrastructure and being a great help in the porting process.
sixstringsg, TkGlitch, and Skitz: Helping me get GPS going on ICS.
Team ICS Passion: This build uses a gpsd blob they found for their ROM from older versions of CM7.
and everyone else involved in this port or CM7 for SGS.
Reserved. *10 char*
thanks FaultException. was waiting on six to bring us Build 16, going to give it a try later when i get home, thank for this and the good work you are doing on cm7.
thanks will try tomorrow
Thank
Thanks FE and wish you all best.
Thanx man...will flash this.
What is the stock kernel the rom comes with???
krackerjac said:
What is the stock kernel the rom comes with???
Click to expand...
Click to collapse
It's the standard Aries CM kernel.
Thanks again FaultException for your time and effort which I know the Vib community here appreciates it 800% !
Fault Exception is there any way you could committ the yagf2 GPS fix in to this rom. It makes a huge difference in GPS lock speed over stock.
hurtz777 said:
Fault Exception is there any way you could committ the yagf2 GPS fix in to this from. It makes a huge difference in GPS lock speed over stock.
Click to expand...
Click to collapse
The what? You'll have to give me a link.
FaultException said:
The what? You'll have to give me a link.
Click to expand...
Click to collapse
I think this http://forum.xda-developers.com/showpost.php?p=19869399&postcount=1
Yeah that is the link to it. It makes a world of difference on GPS locks and accuracy.
the usual gps problem....
it works good first time...then no more and doesnot go in ds too...
damn vibrant first stock!
daffyno said:
the usual gps problem....
it works good first time...then no more and doesnot go in ds too...
damn vibrant first stock!
Click to expand...
Click to collapse
From what rom you came from.i came from cm7 and ended up in a bootloop..wander what im doing wrong.
Edit* if you end up in a bootloop all you have to do is pullthe battery.enter the clockworkmode useng three button combo.reinstall.done.
Sent from my SGH-T959 using XDA App
daffyno said:
the usual gps problem....
it works good first time...then no more and doesnot go in ds too...
damn vibrant first stock!
Click to expand...
Click to collapse
Can you try using yagf2 + http://forum.xda-developers.com/showpost.php?p=22119563&postcount=80 ?
nuwanmw1988 said:
From what rom you came from.i came from cm7 and ended up in a bootloop..wander what im doing wrong.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
another ics rom
chui101 said:
Can you try using yagf2 + http://forum.xda-developers.com/showpost.php?p=22119563&postcount=80 ?
Click to expand...
Click to collapse
the same...
hurtz777 said:
Yeah that is the link to it. It makes a world of difference on GPS locks and accuracy.
Click to expand...
Click to collapse
I'll look into it. If it does make that much of a difference, and I have permission from the authors, I'll throw it in CM9 and 7.
Dougfresh said:
Thanks again FaultException for your time and effort which I know the Vib community here appreciates it 800% !
Click to expand...
Click to collapse
+1 that's right
Sent from my SGH-T959 using xda premium
chui101 said:
Can you try using yagf2 + http://forum.xda-developers.com/showpost.php?p=22119563&postcount=80 ?
Click to expand...
Click to collapse
If u flash that file it works on this rom. I am using this rom and I flashed the GPS fix and I get a GPS lock.
Sent from my SGH-T959 using XDA App
Greetings,
Enjoy this CM10 port for the Ideapad K1!!
Cheers,
- Krook1
Legal disclaimer: I'm not responsible if you brick your tablet, or have other damages in the process.
Features:
Wifi+GPS
HD video/audio
External SD
Gyro
Camera front/back
Bluetooth
Google Now with voice, Chrome
Internal SD (fixed in v2)
Paid apps (fixed in v2)
Auto brightness, Wifi button in notification bar (fixed in v3)
Overclock (1.2, 1.4Ghz) (v5)
USB Storage - MTP only (v5)
Tun.ko VPN support (v5)
3G (v5)
Rotate lock switch (v6)
Home button (v6)
Changelog:
v6.1- Tethering options, User controlled auto-brightness, Updated WiFi Driver (faster connects, no more WiFi SODs)
v6 - Updated to JZO54K/4.1.2, Integrated OC Kernel, BT fixed, Home Button(Home, PgUp, PgDn, Search), Rotation Lock Switch, apns.conf, Battery Stats
v5 - Separate 3G/Wifi images, OC, USB Storage, IP Tunneling/VPN support
v3 - Updated to JRO03L, auto brightness
v2 - Fixes the Internal/External SD card mounts to behave correctly, in normal and recovery mode.
v1 - Initial version with broken SD card functionality
Download links:
Download one of the two below depending on the method you have chosen.
a. CWM Flashable image v6.1:
Wifi (md5: b46a0a5fbe2a20718574b4d2b8eba233) http://www.multiupload.nl/MPKJA2ZSIL or http://www.load.to/ubCFHeCzLi/K1Wifi_CM10_Flashable_v6.1.zip
3G (md5: 7b91fb0631359f5df5f9e1d09a633648) http://www.multiupload.nl/34HM21W1OF or http://www.load.to/cxPyyF9hL6/K13g_CM10_Flashable_v6.1.zip
OR
b. NVFlash starter v2 (md5 d77a9508825132c25be0e9a24c3303c2) :
http://www.multiupload.nl/6ZRTH6VPKU
http://k1.androidfileshare.com/files/K1_CM10_JB_Starter_v2.zip
AND
c. Gapps :
No Picasa http://goo.im/gapps/gapps-jb-20121011-signed.zip
OR
With Picasa http://goo.im/gapps/gapps-jb-picasa-20121011-signed.zip
Install/Upgrade Procedure:
If coming from:
i. A previous version of this ROM:
1. Download a. above, and save to SD card
2. Long press power, select "Reboot" and then "Recovery"
3. Once in recovery, select the file to be flashed (no need to wipe, or flash gapps)
ii. A rom with working CWM with the new ICS kernel (version 2.6.39.4 - seen in About tablet in Settings)
1. Download a. and c. above
2. Enter recovery with the supported method on that rom
3. Wipe data, cache and dalvik-cache
4. Flash a., followed by c.
5. Reboot
iii. Any other rom
1. Download c. to your sdcard, and b. to your PC
2. Power down and enter APX mode on your tablet, with the USB cable connected to the PC
3. Run flash-win.bat or flash-linux.sh (depending on what your PC runs)
4. After table has booted, enter Recovery via long press of Power, and select "Reboot" then "Recovery"
5. Flash the gapps package that you downloaded in step 1.
6. Reboot
7. Perform Procedure i. above
If you are unsure, which of the options above, step c is recommended for first timers.
Issues/Workarounds/Tips:
- Incompatible apps Amazon mobile - Install Amazon App Store, and the Amazon Mobile from Amazon App Store - Camera-settings-Resolution will hang the camera app and will need a restart of the tablet to return to camera app again.
Install the "With Picasa" version of gapps to get the original non-CM10 camera that does not exhibit this bug. - Sleep Of Death (tablet wont wake-up) - Upgrade to v6.1
- Adobe Flash (as a browser plugin) does not work
This is not officially supported on Jelly Bean, nor will it be on any future versions of Android
You may sideload the ICS version from here http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html - Google Talk Video chat crashes
- Adjusting Light Sensor Levels crashes settings...
Settings > Display > Automatic Backlight > Light Levels (select Use Custom) > Edit Other Levels - Calculator force closes when you start it - Use a real calculator
- Setting - Launcher - Homescreen, when "Show dock divider" is unchecked and then hit the virtual Home button- "Unfortunately, Trebuchet has stopped."
This is a Trebuchet bug, hopefully an updated base will have it fixed.
Archive:
CWM Flashable image v6:
Wifi (md5: 35487a49a4a997c4faa0a4439c296e3c) http://www.multiupload.nl/PG487N45EW
3G (md5: 26415574183f96715e6ea9dd67c64ac9) http://www.multiupload.nl/MBY89TPSD1
CWM Flashable image v5:
Wifi (md5: 14b7fb7dca6977d8ad2a3ccef3ab38fc) http://www.multiupload.nl/RYSHP5H1OE
3G (md5:18690be10df0b506cee53362404c3e27 ) http://www.multiupload.nl/LCP60EJNCF
CWM Flashable image v3 (md5 b42fcb3cdcee04e3670bf3889e676f74):
http://k1.androidfileshare.com/files/K1_CM10_Flashable_v3.zip
http://www.multiupload.nl/YL2ISK9T95
OPTIONALLY
d. CWM Flashable Overclock Kernel (md5: 8508c3cefa2d9f019e284444a354b59f)
http://www.multiupload.nl/EDDU4ZX02Q
3G Test version:
http://www.multiupload.nl/JUTSIQAAXT
CWM Flashable image v2 (md5 7ad3df64d79fe7efb6913136e955e4c0):
http://www.multiupload.nl/NL4AEY3E7U
http://k1.androidfileshare.com/files/K1_CM10_Flashable_v2.zip
Thanks for your work!
Hi,
what about 3g? Is it functional?
Cheers, Jorge
Wow. Really awesome work. I get my ideapad today. Looks like by the end of the weekend ill have jelly bean on it.
Which apps are incompatible? Any google maps problems?
What great work you guys are doing.
Sent from my ST25i using xda app-developers app
Awesome work krook1! I didn't even know you were still around. You should join me in freenode room #ideapad-k1. I would like to work on an AOSP jellybean build.
No gapps with flash...
Should I have gotten Google play, gmail' sect. With this flash?
jfkerekes said:
Should I have gotten Google play, gmail' sect. With this flash?
Click to expand...
Click to collapse
Like all cm roms gapps are installed separately.
Grab the latest from RootzWiki here:
http://wiki.rootzwiki.com/Google_Apps
You'll want to grab the latest for 4.1.1 since this is Jellybean
^^ good thing you reminded this. I'd have flashed the ICS apps instead.
Great
I be a newbie on this could some one tellme how i can flash this rom, thanks in advance.
Thanks Khanning. Wondered if that was the case but couldn't seem to find a good DL link.
---------- Post added at 05:55 PM ---------- Previous post was at 05:05 PM ----------
Will the touch version of recovery work if installed from Rom Manager?
---------- Post added at 05:56 PM ---------- Previous post was at 05:55 PM ----------
Will the touch version of recovery work if installed from Rom Manager?
Flashed successfully.
All google apps working as far as I can tell.
Cameras working.
Most apps compatible. Cant really tell which ones arent cos all the ones I use are.
Smooth rotation.
Absolutely fantastic. Glad I returned my nexus 7 (and didnt try another replacement.
Thanks to Khanning and krook. I love you guys.
Sent from my ST25i using xda app-developers app
Jrincon_v said:
I be a newbie on this could some one tellme how i can flash this rom, thanks in advance.
Click to expand...
Click to collapse
Im in the process of creating an nvflash based package for you to be able to start clean.
Done: See OP
jorge.aragon said:
Hi,
what about 3g? Is it functional?
Cheers, Jorge
Click to expand...
Click to collapse
I think I included the right files for 3g to be functional, but I have a wifi only model.
I can definitely work with you to get it debugged, if you can give it a shot.
Before you flash, if you can collect both logcat and dmesg, on the ICS release from Lenovo, it will help debug much faster.
Its then just a matter of comparing what is not happening in the logcat/dmesg of this rom.
Thanks
Drop box has blocked your public links to th downloads
jfkerekes said:
Drop box has blocked your public links to th downloads
Click to expand...
Click to collapse
Going to try goo.im, unless someone has another server to host?
Having a major problem. Everything is working except I cant download purchased apps from the play store keeps saying 'couldnt install to sd or usb storage or something like that.
Google searched it but those fixes dont work.
Took out my sd card and reflashed through nvflash. Same problem and it even showed external sd as 0.00 bytes.
Big issue.....
Pls help....
krook1 said:
Going to try goo.im, unless someone has another server to host?
Click to expand...
Click to collapse
http://www.androidfileshare.com/ is the one Cybie was offering. It won't let you upload files >100mb until you create a login but it seems to work alright.
Is it possible that there is prmissions issue on the external SD card? I notced that I could not browse the external sd, or internal for that matter when connecting to my PC. n fact, other than the device eing detercted, I cannot browse anything on it and it does not show in My Computer.
gallahad2000 said:
http://www.androidfileshare.com/ is the one Cybie was offering. It won't let you upload files >100mb until you create a login but it seems to work alright.
Click to expand...
Click to collapse
Thanks gallahad2000. Ive added newer links in the OP, hopefully they survive!!
jfkerekes said:
Is it possible that there is prmissions issue on the external SD card? I notced that I could not browse the external sd, or internal for that matter when connecting to my PC. n fact, other than the device eing detercted, I cannot browse anything on it and it does not show in My Computer.
Click to expand...
Click to collapse
Yep, you're right. Will debug this evening. Not sure if its a permissions issue, Ill check it out.
Summarized Standard Disclaimer: use at your own risk. I use it at mine.
*Full wipe recommended if coming from another kitkat rom*
MAKE SURE TO HAVE A BROWSER APK. THERE IS NO MORE STOCK BROWSER. For firefox see below.
My personal build "Diamond Rom 4.4" is based on omnirom with the following additions:
CM Calculator (the newly redone one they're proud of)
CM File Manager
CM Wallpapers
Bash shell
Nano text editor
Powertop
Koush's full featured open source superuser (and it's INTEGRATED into settings :cyclops: )
Carbon rom blue balls wallpaper
Cyanogenmod port of 2 column settings adapted to Omni rom.
Omni floating window
I've added a few of my personal touches which include
Batter circle color changing: green 100%-51% yellow 50%-16% red 15%-0% This was my favorite I9000M framework-res mod that I've missed since switching to CM7.2 way back.
Killed lock screen music full screen (personal privacy thing when riding public transportation)
Disable android external storage management: messes with ext4 formatted hard drives or multi partitioned hard drives. Use the unix style mount command
Disable hardware keyboard on boot: disabled but not removed. You'll have to manually turn it on
Removed camera sounds
Disable SELinux at the kernel level. It's even disabled on my laptop/desktop at the kernel because it seems like it's more trouble than it's worth.
Put the dalvik cache in the cache partition. Don't waste the data partition for it. :cyclops:
And of course, comes bundled with my A1 kernel :cyclops:
Every thing I've tested: camera, youtube hd, sound, gps, usb otg(use manual mount command) etc work.
*Instructions*
First time flashing omni:
-Read second post FAQ and other important information.
-Flash TWRP (you can flash twrp over cwm from cwm if you're in that situation)
-Reboot into new recovery
-Make recovery backup (optional)
-Run Titanium Backup (highly recommended)
-Full wipe
-Format system partition
-Install ROM
-Install gapps
-Reboot :cyclops:
Subsequent flashes:
-Install ROM
Downloads
Mediafire Wifi download folder with md5sum file
Mediafire 3G download folder with md5sum file
Mediafire TMobile download folder with md5sum file
*Authorization to download is just a captcha. Simply enter the text in the picture or name the item being advertised in the picture.* Mediafire sure beats sh***y sites like uploaded.net or rapidgator
A1 Kernel (as its own download)
V1.9.2: Security fix made aware by cyanogenmod, specifically this. The commit message on my github has a copy and paste mistake. It should list both of those security flaws as patched instead of the same one twice. Oops :cyclops: Security fix comes with ALL roms June 28 and onwards.
3G/Wifi 6ff199d6c9037d222a70ec0c561c8028
TMobile a675fd353ad3ad7dbf8e6bf2109fa360
TWRP Recovery
2.7.1.0 Wifi 6c995325e749e7561893e398847b09a0
2.7.1.0 3G 8fa04be69d0faf3d9a134e829ddff680
2.7.1.0 Wifi July 8 a8d12c13aac7430a319369069d814e72
2.7.1.0 3G July 8 dc1c50622c29c621f29b95f4c53734ea
2.7.1.0 Wifi August 11 b2c21e8fd58dc38a9c8b7669031b84b1
2.7.1.0 3G August 11 9f48defe78391e63a9053cbd281f738f
2.7.1.0 TMobile August 11 87fb29c803a2e3a56d98a1475c5fce8f
2.8.0.0 Wifi cfdac70d0ccac34cf220887eab72f8b0
2.8.0.0 3G d7918eb397f54c484e04a6d5cb07945c
2.8.0.0 TMobile aaf7c6d2455ca32178ec846f5186c774
Newer versions of firefox explicitly disable flash on tegra2. Use my firefox mod which is just normal firefox with a hacked tegra2 blacklisting mechanism. Don't use the old firefox apk. It has unpatched security holes.
Changelog: omnirom gerrit
Sources: https://github.com/AAccount?tab=repositories Has my device trees as well as all the omni repos I forked with my additions.
Credits:
Kasper_h: helping to make 4.4 possible
pershoot: original device tree from CM10.1
Omni team: providing great starter rom and keeping it TF101 compatible
fred6681: original gapps package. I just removed the 4.4.2 check
Cyanogenmod team: rom extras like calculator, superuser, to fill in Omni's missing holes and 2 panel settings template.
XDA:DevDB Information
Omnirom+ 4.4 for Galaxy Tab 10.1, ROM for the Samsung Galaxy Tab 10.1
Contributors
AAccount
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.1.x
Based On: Omni
Version Information
Status: Stable
Created 2014-10-12
Last Updated 2014-10-11
Known Issues:
Wifi signal indicator and speed indicator don't show up
No list of 3G APN. Write down your settings first
Bluetooth audio issues
Recovery adb doesn't start automatically. In recovery, go to Advanced --> ADB Sideload and start it. You can then cancel it if you don't want to use that. It just starts the recovery adb and will continue to run until you reboot. fixed thanks to twa_priv
Use another recovery for TMobile. Apparently the twrps I make can't boot on TMobile hardware even though it boots on my Wifi only.
FAQ
How do I get multi window: Settings-->(second) More --> App circle bar (check box) && --> Included apps (choose what you want available in multi window)
Yes you can flash TWRP over CWM
Random flickering: Try Settings-->Developer options -->Disable HW Overlays.
Can't install a very large quantity of apps: fix
Can't mount ext4 media: kill the e2fsck process assuming you safely removed the media before sticking into the tablet.
(Below this is optional)
(Android device manager does have legitimate uses. However, please read and consider the following paranoid but realistic fantasy:)
Completely disable android device manager: By only going to Settings->Security->Device administrators and un checking "Android Device Manager" this doesn't completely remove the ability for google to send in commands to your device. Go to the google play store through a web browser, choose android device manager, and try "ringing" your device. To my horror, my tablet started to ring as if it got a phone call. I don't find it acceptable that gapps gives google a way to setup a remote command and control operation. In any other operating system this is considered a back door or virus.
To close this back door install Xprivacy. Enable system apps to be modified. Look for the entry (should be highlghted in red to indicate a system app) "Google Account Manager, Google Backup Transport... (lots of items here) ...Google Services Framework". Check mark Notifications and open its menu. Check mark the items in red. These are cloud to device (c2d) permissions which do exactly what you think. While not necessary, disable identification too for good measure. This disabled the ring feature on my tablet which means android device manager should no longer be able to send in commands. I don't have the guts to try the device wipe feature but it should work too. Do not disable location otherwise google maps won't be able to find you which means no gps car navigation.
See this post about building from source. I use a different, simpler trick for prebuilt chromium binaries. Fear not, they are source built but only when there are real source changes. They're just recycled in between to save 90mins/build of time.
Downloading now!! Thanks for your work!!
Enviado desde mi GT-I9195 mediante Tapatalk
Another 4.4.3 for the tab?
Thank you very much!
Hi AAccount,
thanks for your 4.4.3 ROM, sounds promising ... however, what about the graphical glitches on that vesion? I always went back to ROM version CM10.2/SGT7 as this seems to be the latest one without those glitches (last version I tried was Nameless ROM version 4.4.2 where they were still visible ... and annoying).
Thanks in advance,
mistersixt.
Great job!! Runs fast without bugs and glitches, only youtube HD...
The best kitkat rom!! Thanks !
Enviado desde mi GT-P7510 mediante Tapatalk
Best kitkat rom. I have some glitches. It is not as smooth as cm10.2 so i am going back to cm10.2.
What graphical glitches do you mean? I think ever since omni fixed the screenshot way back most graphical bugs have been ironed out. By youtube hd do you mean it doesn't play or can be laggy? If you mean laggy I read on wikipedia the GPU video decoding on the tegra2 sucks. That's a hardware problem.
3G build and new recovery coming later today. I cheated the chrome renderer build process by copying all the freshly done ones from the wifi only output folder.
My github is now fully up to date with all the appropriate omni repos forked with my personal touches whether it be the audio blob fixes or little things I like.
Sent from my GT-P7510
What are the flashing instructions? Is there a preferred gapps package?
Sent from my GT-P7510 using Tapatalk
AAccount said:
What graphical glitches do you mean?
Click to expand...
Click to collapse
With all ROMs starting with 4.3 it looks like if a flash of lightning goes from one corner to the other (my wife is saying it looks more like a scratch) for maybe 100 ms, this happens quite constantly though, every minute or something. Also, in some games like flappy bird the application gets stuck for maybe 100 to 200 ms completely (every 5 to 10 seconds maybe) before it continues, this makes playing games unpossible (temple run is another good example).
With 10.2/SGT7 this does not happen ... for whatever reason.
Regards, mistersixt.
lancem71 said:
What are the flashing instructions? Is there a preferred gapps package?
Sent from my GT-P7510 using Tapatalk
Click to expand...
Click to collapse
I added instructions. There's no really preferred gapps package. I just like that one because it's the smallest one that gets the job done. There are some gapps packages that are bigger than the rom which I consider bloated.
mistersixt said:
With all ROMs starting with 4.3 it looks like if a flash of lightning goes from one corner to the other (my wife is saying it looks more like a scratch) for maybe 100 ms, this happens quite constantly though, every minute or something. Also, in some games like flappy bird the application gets stuck for maybe 100 to 200 ms completely (every 5 to 10 seconds maybe) before it continues, this makes playing games unpossible (temple run is another good example).
With 10.2/SGT7 this does not happen ... for whatever reason.
Regards, mistersixt.
Click to expand...
Click to collapse
I get these randomly sometimes but not often enough that I would consider it an issue. In angry birds it's an issue but if you go to Settings-->Developer Options check mark "Force GPU rendering" and "Disable HW overlays". Then you can play angry birds at least without the lightning.
And now for an important question
I have a script that puts /data/dalvik-cache on /cache/dalvik-cache as it was way back in android 2.2 froyo. Even though our tablet shipped with android 3.0 and my I9300 S3 shipped with android 4.0, Samsung seems to have been very sloppy and left the /cache partition huge to accomodate the froyo standard. This is a waste of space that will never be used. The cache paritition is 0.5GB. Is it OK if I include this script as a boot script? Is 0.5GB/500MB enough for most peoples' dalvik-cache? This will free up that space and add it to the internal sd card.
Great room, thanks! Everything working OK during the first hour of use
Sent from my GT-P7500 using XDA Free mobile app
Thanks for posting this! Great ROM. Only problem I'm having is the APN settings are blank for my 3G tablet (P7500). I input them manually and everything works, but normally they are preset.
AAccount said:
I get these randomly sometimes but not often enough that I would consider it an issue. In angry birds it's an issue but if you go to Settings-->Developer Options check mark "Force GPU rendering" and "Disable HW overlays". Then you can play angry birds at least without the lightning.
And now for an important question
I have a script that puts /data/dalvik-cache on /cache/dalvik-cache as it was way back in android 2.2 froyo. Even though our tablet shipped with android 3.0 and my I9300 S3 shipped with android 4.0, Samsung seems to have been very sloppy and left the /cache partition huge to accomodate the froyo standard. This is a waste of space that will never be used. The cache paritition is 0.5GB. Is it OK if I include this script as a boot script? Is 0.5GB/500MB enough for most peoples' dalvik-cache? This will free up that space and add it to the internal sd card.
Click to expand...
Click to collapse
Many thanks for this!
"Disable HW overlays"- for some reason this setting does not stick between reboots (not your ROM problem- it happens in all devices that I've ever seen). Is there a way to apply it automatically during or after boot? Such as in a script, or init settings etc?
Regarding the Dalvik cache, is there a way to know how much space all my installed apps + system are currently using?
jaibar said:
Regarding the Dalvik cache, is there a way to know how much space all my installed apps + system are currently using?
Click to expand...
Click to collapse
Go to the CM File Manager --> Settings --> General Settings -> Compute folder statistics and check mark that box. Also in the same area be sure to set access mode to prompt user mode or root access mode. Then, go to /data and hold dalvik-cache folder until get a menu and choose properties. The size will show up under "Size: ". Mine is 208mb.
AAccount said:
Go to the CM File Manager --> Settings --> General Settings -> Compute folder statistics and check mark that box. Also in the same area be sure to set access mode to prompt user mode or root access mode. Then, go to /data and hold dalvik-cache folder until get a menu and choose properties. The size will show up under "Size: ". Mine is 208mb.
Click to expand...
Click to collapse
238MB here. Maybe a quick poll can help gather info on how much allocation must users are using?
Sent from my GT-P7510 using Tapatalk
jaibar said:
238MB here. Maybe a quick poll can help gather info on how much allocation must users are using?
Sent from my GT-P7510 using Tapatalk
Click to expand...
Click to collapse
Same around 2xx mb. I'm fine with it, since the 400mb in /cache is wasted anyway.
Sent from my GT-P7500 using Tapatalk
223MB here
Is Netflix working on this ROM. Asking because there is problems on the Nameless ROM.
Sendt fra min GT-I9305 med Tapatalk
thra1982 said:
Is Netflix working on this ROM. Asking because there is problems on the Nameless ROM.
Click to expand...
Click to collapse
Every time somebody asks about Netflix... I fell I'm missing something big...
While waiting for Euphoria marshmallow I did a test build for CM-13, so here it is.
If anyone want to take over this, I can help setting everything up.
Installation instructions:
Installing CM 13 for the first time, or coming from another ROM:
- Make sure you're running a proper working ClockworkMod-Recovery/Team Win Recovery Project for ext4 and with selinux support.
- Copy GApps and ROM ZIP to your SDCard
- Boot into Recovery
- Make a backup of your current rom just in case
- Wipe system, data, cache and dalvik-cache
- Flash CM zip from SDCard
- Flash GApps zip from SDCard (Don't reboot before installing this if you plan to use GApps)
- Reboot
- Don't restore system data using Titanium Backup!
- I don't recommend changing kernel.
Upgrading from an earlier version:
- Copy the ROM ZIP to your SDCard
- Boot into Recovery
- Wipe cache and dalvik-cache
- Flash the ROM zip from SDCard
- Reboot
Download:
ROM HERE
Recommended GAPPs HERE Don't use google stock package
Source:
Cyanogenmod: here
device_lge_p880: here
kernel: here
repo patches: here
Notes:
-Selinux is in permissive mode for now.You can change it to enforce by typing setenforce 1 in terminal.
-Wifi display(Screen cast) is disabled and it will not work with the old blobs that we have.
-I'm not trying to take ower for laufersteppenwolf. I use stock blobs and I'm just trying to help.
-I created this because someone shared the build in the Euphoria thread.
bugs:
-reboot to recovery
-after reboot "System process not responding" is displayed
-error "invalid number" after remote call disconnect
- Keyboard bug with open_GApps: After install of GApps, install attached cm-13.0-UNOFFICIAL-OpenGapps-keyboard_hotfix_5-16.zip to fix the FC of AOSP keyboard.
- video problems in default browser. Try a differnt browser.
- video preview in gallery have a green overlay, video playback is ok.
- some minor bugs in setting->performance
- (Perfomance is not great on this old phone)
-??
Please add signature faking patch!
Sometimes when I press the power button it opens up the camera app. Other than that it is stable and much faster than the stock ROM.
Great job. Keep it up!
--EDIT--
Also when the phone is charging the touch buttons are lighting up.
is it worth updating from euphoria? what changes
Thanks for creating a new thread :good:
ItsClobberinTime said:
Sometimes when I press the power button it opens up the camera app. Other than that it is stable and much faster than the stock ROM.
Great job. Keep it up!
--EDIT--
Also when the phone is charging the touch buttons are lighting up.
Click to expand...
Click to collapse
"Sometimes when I press the power button it opens up the camera app." It is feature on android 6.0, press power button twice and camera app open directly.
Overall this ROM is excellent.
Thanks for your support Alfa samsung.
Do you have a changelog for the new version @alfsamsung ?
What a great surprise. Again thanks for your dedication in developing this device.
I intsalled yesterday, installed with google keyboard via recovery, sometimes laggy but almost ready for daily driver. And I can say that M is better than L.
Thanks so much!!! Its nice to see there is still hope for my old and trusty phone
Works fine. Just a few reboots in 10 hours. Still can't get 100% deep sleep. Stopped a few services and it system update. Sleeps only 80%. Because of Android system .
any change log for cm-13.0-20160219-UNOFFICIAL-p880-beta.zip
Salman Al-Badgail said:
any change log for cm-13.0-20160219-UNOFFICIAL-p880-beta.zip
Click to expand...
Click to collapse
2 commits on github:
libsymbols: Shim load ril and camera libs. Remove libboringssl-compat
power: Add powerHAL (Based on asus flo powerHAL.)
maybe we get better changelog later
Why I can't see drivers when I connect the phone to pc ?
Edit :
I found the way,
developer options > Usb Config. > choose MIDI and ready to go
asgz said:
Why I can't see drivers when I connect the phone to pc ?
Edit :
I found the way,
developer options > Usb Config. > choose MIDI and ready to go
Click to expand...
Click to collapse
Did you find any bugs??
Very good for early build! Keep it up. I didn't test it enough. I can only say app launch speed is good but there is so much fps drop in apps.
Salman Al-Badgail said:
Did you find any bugs??
Click to expand...
Click to collapse
As usual working very smooth, all apps working fine.
Sometimes restart itself,
Wake up screen with sound button is working,
Gps is working,
sometimes beginning of call other person can't hear me, I can hear very clear.
after finishing call msg appear and says invalid number.
And for now I will not return to 5.1.1. After a few new vers. I believe that M will work better than other android vers. on our P880.
@alfsamsung, our last developer, I hope you will continiue developing.
Greetings
asgz said:
As usual working very smooth, all apps working fine.
Sometimes restart itself,
Wake up screen with sound button is working,
Gps is working,
sometimes beginning of call other person can't hear me, I can hear very clear.
after finishing call msg appear and says invalid number.
And for now I will not return to 5.1.1. After a few new vers. I believe that M will work better than other android vers. on our P880.
@alfsamsung, our last developer, I hope you will continiue developing.
Greetings
Click to expand...
Click to collapse
Thanks for replying, Did anyone had same bugs or extras???
Thanks for all @alfsamsung,you are a great guy and helpfull developper ,now ı'm trying cm 13
On my phone after switching on GPS power button stop working.
One restart for 2 days all the rest works very well.
After a few tests, I know that this is not problem with GPS, only applications which leave screen turned on.