[Q] ROM Manager Signature Verification Failure - Captivate Q&A, Help & Troubleshooting

A few weeks ago I flashed the Cognition V2.2 ROM and everything was fine until it started getting twitchy a few days ago. I tried to use the ROM Manager to restore the backup that was created during the flash but I keep getting the same error message and the phone does not seem to go into the Clockwork Mod Recovery but stays in the Android system recovery. The message says that the whole-file signature has failed to verify and that the installation was aborted. Does anyone have any idea how I can get my phone back to normal?

gtcochran said:
A few weeks ago I flashed the Cognition V2.2 ROM and everything was fine until it started getting twitchy a few days ago. I tried to use the ROM Manager to restore the backup that was created during the flash but I keep getting the same error message and the phone does not seem to go into the Clockwork Mod Recovery but stays in the Android system recovery. The message says that the whole-file signature has failed to verify and that the installation was aborted. Does anyone have any idea how I can get my phone back to normal?
Click to expand...
Click to collapse
Common knowledge that the version of Cognition you are running is not supported by ROM Manager, it is 3e recovery and Clockwork needs 2e. You can update to the newer Cognition which has 2e recovery. I recommend you read the facts sheet befor flashing, the method you should use is Odin one click back to stock http://forum.xda-developers.com/showthread.php?t=731989, then master clear so that nothing is lingering from your previous setup, backup everything from your internal storage to your pc first, this will wipe everything from your internal, replace it after you finish Master clear. you should only replace the update.zip, ClockworkMod and your music, photo's and that stuff. Backup your apps using Titanium Backup.
Here's the link for the new Cognition http://forum.xda-developers.com/showthread.php?t=786532

So I tried what you recommended and got my phone back to the stock condition but I'm still not able to use ROM manager or flash another ROM. After I root the phone I install ROM Manager, flash it to the current edition and then try to reboot into recovery but when it gets to recovery it gives the following error message...
--Installing from package...
Finding update package...
Opening update package...
E:Can't open /cache/update.zip
(bad)
Installation aborted
Also the header of the screen states that I am in Android system recovery <2e>. If I am not mistaken, shouldn't I be in recovery <3e>? If so how do I get there? I've tried flashing the stock Kernel but that didn't work and I even installed the internal betas correctly but no cigar.

gtcochran said:
Also the header of the screen states that I am in Android system recovery <2e>. If I am not mistaken, shouldn't I be in recovery <3e>? If so how do I get there? I've tried flashing the stock Kernel but that didn't work and I even installed the internal betas correctly but no cigar.
Click to expand...
Click to collapse
did you really read Rhi's post?
in order to use rom manager (clockwork mod) you must be using 2e!
my brain hurts from all the lack of searching people in this forum seem to have a problem with

Pirateghost said:
did you really read Rhi's post?
in order to use rom manager (clockwork mod) you must be using 2e!
my brain hurts from all the lack of searching people in this forum seem to have a problem with
Click to expand...
Click to collapse
LOL, +1

Touche, but the error still remains. Does anyone have any positive ideas? Like I stated before, I still cannot put my phone into clockwork mod recovery.

gtcochran said:
Touche, but the error still remains. Does anyone have any positive ideas? Like I stated before, I still cannot put my phone into clockwork mod recovery.
Click to expand...
Click to collapse
so put it in download mode, and use ODIN one click back to stock...then leave it the hell alone....

Like I said, I've already used Odin. Everything is back to stock except for the Kernel and a stock kernel install with Odin doesn't seem to work. Odin says that the install passed but nothing changes on the phone itself. All things considered, the phone is stock but not capable of going into Clockwork Mod recovery.

gtcochran said:
Like I said, I've already used Odin. Everything is back to stock except for the Kernel and a stock kernel install with Odin doesn't seem to work. Odin says that the install passed but nothing changes on the phone itself. All things considered, the phone is stock but not capable of going into Clockwork Mod recovery.
Click to expand...
Click to collapse
When you go into stock recovery now is it version 2e or 3e?

gtcochran said:
Like I said, I've already used Odin. Everything is back to stock except for the Kernel and a stock kernel install with Odin doesn't seem to work. Odin says that the install passed but nothing changes on the phone itself. All things considered, the phone is stock but not capable of going into Clockwork Mod recovery.
Click to expand...
Click to collapse
if you used the one click back to stock then you are on the stock kernel.....what makes you think you are not on the stock kernel?

The recovery is 2e
I believe that the kernel is not stock because when I look at the phone information it says that the kernel is
2.6.29
[email protected] #2
I'm not sure that it is stock or not but my gut tells me that it isn't.

gtcochran said:
The recovery is 2e
I believe that the kernel is not stock because when I look at the phone information it says that the kernel is
2.6.29
[email protected] #2
I'm not sure that it is stock or not but my gut tells me that it isn't.
Click to expand...
Click to collapse
Rom manager will work just fine with 2e recovery. Just delete any update.zip files you have in your home directory - then open rom manager and reflash clockworkmod the cappy - then you should be good to go.
As for whether or not that is the stock kernel I am not sure, but how can you tell just by looking at it if you don't know which kernel is the stock one?

I've mounted my internal and external sd cards and removed any updates but it still gives the same error. After I used the odin one-click to flash the stock rom I used the master clear as recommended. Now, if I am not mistaken, shouldn't that erase all of my user data? I reinstalled my espn app so I could follow my football team and the app still remembered my preferences and favorites. This makes me think that the master clear did not finish the job. Thoughts?

gtcochran said:
I've mounted my internal and external sd cards and removed any updates but it still gives the same error. After I used the odin one-click to flash the stock rom I used the master clear as recommended. Now, if I am not mistaken, shouldn't that erase all of my user data? I reinstalled my espn app so I could follow my football team and the app still remembered my preferences and favorites. This makes me think that the master clear did not finish the job. Thoughts?
Click to expand...
Click to collapse
Master clear should've done that. If you are restoring your apps and settings using Titanium Backup then you are restoring user data which you should not do.
When you Master Clear is your device on and on the home screen, it needs to be. Don't Master Clear in Recovery mode or Download mode or it does nothing. Also you need to have debugging on.
2.6.29
[email protected] #2
That is the stock kernel. Just so you know if you are running stock with root you can simply place the update.zip from the Clockwork folder, you should have backed up before flashing and Master clear, back into your internal. ClockworkMod does fail on first attempt to flash sometimes, it happenned to me the first time I flashed it, the second time worked like a charm. Are you rooted? You need root to use ROM Manager and debugging should be on.

gtcochran said:
I've mounted my internal and external sd cards and removed any updates but it still gives the same error. After I used the odin one-click to flash the stock rom I used the master clear as recommended. Now, if I am not mistaken, shouldn't that erase all of my user data? I reinstalled my espn app so I could follow my football team and the app still remembered my preferences and favorites. This makes me think that the master clear did not finish the job. Thoughts?
Click to expand...
Click to collapse
After you deleted the update.zip then opened rom manager and flashed clockworkmod it should of put a new update.zip on your phone in your home directory - can you confirm that this is the case?
Also you may not have had a successful master clear - you may want to do it again then redo odin3 one click. Also if I am remembering correctly I believe you have the option to clear cache or user data or both in stock recovery you may want to try that as well.

It all works now. The issue was with the master clear. I guess that I did try to run it in the download mode. Thanks a million guys, i really appreciate it.

Maybe I was a bit premature on that. ROM Manager works beautifully but I cannot install updates or flash a custom ROM. The Manager was able to backup the system correctly and enter clockwork mod recovery but it cannot install the update. If the update is on the internal SD it says that...
E:Can't open /sdcard/update.zip
(bad)
and if the update is on the external SD it says that there is no such file or directory. Am I doing it wrong or is there still an underlying issue?

gtcochran said:
Maybe I was a bit premature on that. ROM Manager works beautifully but I cannot install updates or flash a custom ROM. The Manager was able to backup the system correctly and enter clockwork mod recovery but it cannot install the update. If the update is on the internal SD it says that...
E:Can't open /sdcard/update.zip
(bad)
and if the update is on the external SD it says that there is no such file or directory. Am I doing it wrong or is there still an underlying issue?
Click to expand...
Click to collapse
/sdcard/update.zip should only boot into clockwork recovery from stock recovery or boot to stock recovery from clockwork recovery if you flashed clockworkmod correctly from rom manager - and so long as you are not renaming any other files as update.zip after you flash clockworkmod recovery.
Which custom rom are you attempting to install?

I got it. The zip file was corrupted. Now, should I be able to boot into normal clockwork mod recovery with the Cognition 2.2 Beta 7 cuz when I try clockwork recovery it boots into normal recovery? I'm still a little hazy about all this.

gtcochran said:
I got it. The zip file was corrupted. Now, should I be able to boot into normal clockwork mod recovery with the Cognition 2.2 Beta 7 cuz when I try clockwork recovery it boots into normal recovery? I'm still a little hazy about all this.
Click to expand...
Click to collapse
When you first boot into recovery it should be stock recovery. While in stock recovery when you select reinstall packages it will reboot into clockwork recovery - if you flashed clockworkmod recovery correctly from rom manager and it put the appropriate update.zip into your home directory.
And just to note: don't be renaming any files as update.zip if you are using clockwork recovery to flash something.

Related

Cannot get into cwm recovery

Please delete this post
Smallsmx3 said:
flashed back to jf6 via one click twice now. master cleared..... everytime i try to boot into recovery i get into 2e. dont flame me just help. anyone else have this issue before?
Click to expand...
Click to collapse
Did you put the update.zip on your internal SD card? If not I have attached it to this post. Please be careful in the future where you post though. There are a few bad apples that will rip you apart.
More info is needed to help you out. What setup where you running before?? Do you have the correct update.zip for CWM on the root of your sd and are you reinstalling packages x2 in 2e recovery and its not working or what?? Pretty vague in the OP.
EDIT: If you master cleared it wiped your sd and you need to put the update.zip that adamholden posted back on your sd.
whats the update.zip file? root access? I have root. everyone knows if you post in general you dont get replies.....
The update.zip that he posted is not root. Its for CWM and you should always keep it on your internal sd to always have CWM available. Just move the zip to your SD and select reinstall packages two times for the green txt CWM recovery.
was on eugenes gingerbread themed rom... going from r2 to r3....failed at line 2 so I one clicked....master cleared and everytime i try to get into CWM recovery 2e boots up instead.....i have root
silverslotcar said:
The update.zip that he posted is not root. Its for CWM and you should always keep it on your internal sd to always have CWM available. Just move the zip to your SD and select reinstall packages two times for the green txt CWM recovery.
Click to expand...
Click to collapse
i didnt know this existed....thanks...ill try it out
Smallsmx3 said:
whats the update.zip file? root access? I have root. everyone knows if you post in general you dont get replies.....
Click to expand...
Click to collapse
CWM is an update.zip file on your sdcard (assuming your not using a kernel with it baked in). What happens when you hit reinstall packages, is that it takes the CWM update.zip and flashes it, replacing 2e with CWM. If you don't have that update.zip on your sdcard, then you won't be able to get to CWM.
Yea, have you ever been in rom manager and had to "Flash Clockwork Recovery." Well thats what it is doing. Its putting CWM recovery as an update.zip on your sd. You should be good to go once you do that.
I had the same thing happen to me. I will list what I did step by step as best as I can remember not because all of it is necessarily relevant, just for a frame of reference:
i. Odin 1 clicked to stock
ii. one click root
iii. installed CWM from market
1. Opened CWM, selected install rom from SD card, did not check backup rom or wipe data.
2. Phone rebooted into stock recovery screen, selected reinstall packages, rebooted phone.
3. Repeated step 1 and 2 about 10 times with nothing happening. (Normally, the second time I go through this process, it installs the rom)
4. I tried selecting "Reboot into Recovery" (the manual option) but still nothing happened, it was taking me to the 2e stock recovery.
5. I went back into CWM and selected "All CWM Recoveries" and flashed the older version 2.5.1.1
5. Selected "Reboot into Recovery" again and the CWM recovery window came up and I was able to manually select my ROM from there.
Thanks for Clockwork Mod save
Thank you!!!! Like the previous poster I couldn't get into Clockwork to flash a new ROM altho' I went into recovery at least a dozen times - your fix worked! I downloaded an earlier Clockwork and that instantly took me to the correct screen. A million thanks, I thought I would be stuck in 2.1 for the life of the phone since it wouldn't flash.
dslsurfer said:
Thank you!!!! Like the previous poster I couldn't get into Clockwork to flash a new ROM altho' I went into recovery at least a dozen times - your fix worked! I downloaded an earlier Clockwork and that instantly took me to the correct screen. A million thanks, I thought I would be stuck in 2.1 for the life of the phone since it wouldn't flash.
Click to expand...
Click to collapse
Glad that you found a fix haha

[Q] Problem with Rom Manager Premium

I am having an issue with Rom Manager Premium. It won't let me backup my current ROM. I select the option and it just asks me for a filename then reboots the phone into recovery mode. I check my SD card for a backup file and nothing gets created... What gives?
I've tried googling my problem, but people say to select the "Flash Alternate Recovery" option, but it's greyed out for me. And I have the latest version of Clockwork Mod 2.5.1.2
I am running an ATT Captivate SGH-I897 with the leaked 2.2 froyo rom on the Rogers network in Canada.
Dev will also not respond to my emails.
Suggestions?
I would suggest to go into recovery then advanced I believe then choose backup. Then if you go back into rom manager you will see a backup. Rom manager is just doing the same function. I usually just use the backup or restore from recovery menu anyways and I have rom manager premium also.
Sent from MY Perception 10.1 on XDA App
I think I have this same issue with my ROM Manager now backing up. I don't have the premium version. But my phone just reboots into Recovery whenever I select "Backup Current ROM" from the ROM Manager. Then when I go back to ROM Manager and select "Manage and Restore Backups", nothing happens.
So the workaround is confusing for me.
Select "Reboot into Recovery" using the ROM Manager to go into recovery mode? I have no idea where this advanced menu is either.
I'm just a newbie to ROM Manager and trying to figure out where to see my backups of my ROM....if they even exist.
did you guys follow the directions and FLASH CLOCKWORK RECOVERY from within ROM manager?
then when it boots to regular recovery did you try REINSTALL PACKAGES?
that will put you into clockwork recovery and you can do a backup from there
Pirateghost said:
did you guys follow the directions and FLASH CLOCKWORK RECOVERY from within ROM manager?
then when it boots to regular recovery did you try REINSTALL PACKAGES?
that will put you into clockwork recovery and you can do a backup from there
Click to expand...
Click to collapse
Yes I did that first step. There is a similar post with another fix and an update.zip file attached. I tried that but it froze up during the backup. I think I ran out of space on my internal SD card. I'm not sure how much space I need to do a backup but I only have about 1200MB left on my internal. I'm trying to clear things out. My external 4Gb card is nearly maxed as well. I really want to get a 32Gb external soon.
my clockwork backups are right around 750mb
Pirateghost said:
did you guys follow the directions and FLASH CLOCKWORK RECOVERY from within ROM manager?
then when it boots to regular recovery did you try REINSTALL PACKAGES?
that will put you into clockwork recovery and you can do a backup from there
Click to expand...
Click to collapse
I found out what the problem was... the leaked 2.2 froyo rom I'm running uses the <3e> recovery which I guess is not compatable with ClockworkMod. When I try to reinstall packages it gives me a verification failed message.
So I guess I need to flash a different kernel, or find another workaround. What was the update.zip workaround mentioned before? Could you please post a link?
richuwo11 said:
I found out what the problem was... the leaked 2.2 froyo rom I'm running uses the <3e> recovery which I guess is not compatable with ClockworkMod. When I try to reinstall packages it gives me a verification failed message.
So I guess I need to flash a different kernel, or find another workaround. What was the update.zip workaround mentioned before? Could you please post a link?
Click to expand...
Click to collapse
the update.zip will not work for you if you are on the leaked 2.2 with 3e recovery.
you will need to find a kernel that allows the unsigned zips or 2e recovery...they are in these forums, i will try to find a link

[Q] Trying to flash Serendipity 6.3...

I've never flashed a rom before. I currently have stock froyo with the paragon kernel i flashed using the app sgs kernel flasher. I have clockwork mod rom manager, I created a backup of my current rom. So then I tried installing the serendipity rom from the sd card but i get an error message. I read on the sticky on how to flash a custom ROM you need to use ODIN and flash back to stock 2.1 then do a master wipe and re root it and stuff.
Their link to download ODIN is broken so I don't know how to get it. And is there really no other way to flash it besides doing a master wipe and using ODIN?
flash to stock and master clear is not needed. what IS needed are specifics on WHAT error message you get when trying to flash the rom you want
The error message is
"E: failed to verify whole-file signature"
"E: signature verification failed"
"Installation aborted"
Then it brings be to the blue menu so i just select reboot system now
bad download, re-download rom.
May be completely off, but it doesn't sound like you're actually in clockwork mod recovery, but rather stock recovery.
But here's the post with the one click odin with mirrors and I personally would suggest useing it since I generally like to stick to as clean a flash as I can:
http://forum.xda-developers.com/showthread.php?t=731989
Second, I don't know if you've ever seen MobileTechVids tutorial on how to flash custom roms, but I suggest you watch the full series first if you haven't already.
here: http://www.youtube.com/watch?v=MsafJ-9uRqk
I watch the series and try and stick as close to the tut as I can when I'm unsure (or the one provided by the Rom maker as they know what's best for their rom)...
One suggestion, when flashing Serendipity disconnect your phone from cable right before the actual flashing (gave me a glitch in which I couldn't mount storage via usb). Other than that, read read read. I feel it's all I do when it comes to this stuff, but proper research is indispensible.
thresherhorn said:
May be completely off, but it doesn't sound like you're actually in clockwork mod recovery, but rather stock recovery.
Click to expand...
Click to collapse
+1
Is the text on Recovery mode blue or green? If its blue, you're on stock recovery.
+2
Sent from my SGH-I897 using XDA Premium App
Ok I got the stock rom flashed back and rooted it using one click. Now for some reason I can't reboot into clockwork recovery mode. I flashed it successfully. So i click on reboot into recovery and nothing happens. I try clicking on install room from sd card and that doesnt work either
Power off, hold 3 buttons att screen will come on. Keep holding. Screen will go off. Keep holding. Screen comes on again let off the power button but keep the volumes held, this will boot you into stock recovery, since you said you flashed cwm already I'm assuming you mean with rom manager, so the update.zip should be on your sdcard, so just reinstall packages twice and you should boot into cwm.
AIO tools work well and make flashing roms for new people easy and painless
use a search for it
steph2 said:
AIO tools work well and make flashing roms for new people easy and painless
use a search for it
Click to expand...
Click to collapse
+1.
AIO and superoneclick for root/flashing roms makes the process much easier.
crag11 said:
Ok I got the stock rom flashed back and rooted it using one click. Now for some reason I can't reboot into clockwork recovery mode. I flashed it successfully. So i click on reboot into recovery and nothing happens. I try clicking on install room from sd card and that doesnt work either
Click to expand...
Click to collapse
On serendipities main "download" page they have instructions to install. In those instructions is a link to a file you can download. Place that file along with the serendipity 6.3.zip file in the root of your sd card. Use the " 3 button" technique or Rom managers "reboot to recovery" option to get into stock recovery. Hit "reinstall packages" once/possibly twice. That will put you into clockwork mod recovery. Select install zip from sd card, find the serendipity6.3.zip and click power to flash. Confirm. And after it does some stuff it will ask you to reboot. Upon reboot it will as if you want to enable lagfix. Hit plain "Yes". Watch it do its thing and viola...
You have the "dirty" way of how to flash serendipity... But first I please ask you to spend atleast a day reading this forum or others and understanding these instructions and the reasons behind them.
followed instructions off the website and still doesn't work
I was running 2.2 and have done a lot of reading a video watching (thanks Mobile Tech videos) and finally conjured the guts to flash serendipity.
I flashed stock using odin...that went great. Copied the update.zip to sd card. Installed zip twice in 2e recovery. Copied Serendipity.zip file to sd card. started in recovery mode, selected "install from sdcard" selected serendipity.zip file and it seemed to go through that process rather quickly. Then I selected reboot and then everything just started FCing all over the place. Can't even load the stock that I had on there. I don't know what to do. Help please. I can get it back into recovery mode. Tried doing the wipe data/factory reset. That did help either. Help please. I really want to try serendipity. Thanks again in advanced.
Did you run a restore using TiBu at all? Or was it just a straight flash from stock to Serendipity?
Plus, were you running a phone that came with 2.2 out of the box? Or did you upgrade to stock Froyo yourself?
m3thods said:
Did you run a restore using TiBu at all? Or was it just a straight flash from stock to Serendipity?
Plus, were you running a phone that came with 2.2 out of the box? Or did you upgrade to stock Froyo yourself?
Click to expand...
Click to collapse
I did run TB and I had originally flashed up to froyo (took me all night one night) and then went through the process I explained and hit the dead end. I finally was able to get odin to read the phone and flash back to stock. It was a learning process. I realized that I needed not only the Serendipity_6.3.zip file but ALSO the kitchen file to included with it. That wasn't in the directions I don't think. Finally got it all on there. I love it now. I appreciate everyone's help. Any word on a how-to for Bluedipity?

[Q] How to download clockworkmod and install while offline?

Hello.
ROM manager is unable to download clokworkmod recovery. Maybe because I'm in a "sanctioned country" CUBA and I have a lot of internet restrictions from both Google and my ISP.
My question is: Can I manually download clokworkmod recovery and copy it on the SD card and have ROM manager install it?
If the answer is yes: How? and where do I find Clockworkmod for the captivate?
i897 stock 2.1.1 rooted and unlocked.
Thanks.
ian77ex said:
Hello.
ROM manager is unable to download clokworkmod recovery. Maybe because I'm in a "sanctioned country" CUBA and I have a lot of internet restrictions from both Google and my ISP.
My question is: Can I manually download clokworkmod recovery and copy it on the SD card and have ROM manager install it?
If the answer is yes: How? and where do I find Clockworkmod for the captivate?
i897 stock 2.1.1 rooted and unlocked.
Thanks.
Click to expand...
Click to collapse
all rom manager does is put this zip file on your sdcard. its not needed.
just drop this on the root of your sdcard, reboot to recovery and reinstall packages twice. CWM will come up then
Pirateghost said:
all rom manager does is put this zip file on your sdcard. its not needed.
just drop this on the root of your sdcard, reboot to recovery and reinstall packages twice. CWM will come up then
Click to expand...
Click to collapse
the one caveat to this ... make sure you have the 2e boot loader when you boot into recovery. The 2e bootloader is the stock bootloader that comes with froyo. 3e will require you to have the update packages signed, and therefore will need to downgrade to 2e before you can switch to CWM.
pironic said:
the one caveat to this ... make sure you have the 2e boot loader when you boot into recovery. The 2e bootloader is the stock bootloader that comes with froyo. 3e will require you to have the update packages signed, and therefore will need to downgrade to 2e before you can switch to CWM.
Click to expand...
Click to collapse
Wrong.
2e RECOVERY comes from firmware 2.1, which the OP stated he was on. Froyo comes with 3e recovery. Has nothing to do with bootloader, because the bootloaders are the same between eclair and Froyo.
Sent from my SAMSUNG-SGH-I777
GREAT. THANK YOU VERY MUCH.
Working, one more question. I noticed three things:
1 - If I reboot to recovery again it goes into stock recovery (2e). Then I hit reinstall packages only once and ClockWorkMod comes up.
2 - If I delete the update.zip from the sd card CWM will not work.
3 - ROM Manager still says that CWM is not installed therefore is not working OK.
Is all this ok? Should I select: "Install sdcard:update.zip" while in CWM? Should I do something else?
ian77ex said:
GREAT. THANK YOU VERY MUCH.
Working, one more question. I noticed three things:
1 - If I reboot to recovery again it goes into stock recovery (2e). Then I hit reinstall packages only once and ClockWorkMod comes up.
2 - If I delete the update.zip from the sd card CWM will not work.
3 - ROM Manager still says that CWM is not installed therefore is not working OK.
Is all this ok? Should I select: "Install sdcard:update.zip" while in CWM? Should I do something else?
Click to expand...
Click to collapse
That sounds pretty normal to me. If you are getting into CWM then thats all that really matters. The deal with ROM manager is that it doesnt work very well with our phones. But if you are trying to flash a custom ROM you can still do it without ROM Manager. However, you need to read up about the rom you want to flash because it is a slightly risky process. Its as risky as using ROM Manager and almost Russian roulette if you dont read.
But do not delete the update.zip after you install it. I dont know if it messes with the boot process of recovery mod but I do know its better to have that backup file on your SD card already if you run into a problem later on.
Don't bother with ROM manager. Its close to useless with SGS phones. Make sure your 3 botton combo works and you should be golden. Also making a jig isn't a bad idea also, just incase you do screw up and you get in a softbrick where your keycombos decide to not work.

[Q] cant update from ClockworkMod 3.0.0.5

I want to put a decent new ROM on this old thing but I'm have real trouble. I updated from Android 2.35 to 2.36 as I was having issues (and also as most tutorials point from 2.36). I've rooted and using Odin and and that had CWM Manager 2.0 installed on it. I added ROM Manager from the play market so I could update to the latest ClockworkMod as I understand I need that to put on a new ROM such as 4.4 - before updating it has ClockworkMod version 3.0.0.5 on it. So using ROM Manager I try and update to the latest ClockworkMod and all seems to work ok (it downloads etc) and on rebooting with the CWM Manager app it gives this error:
-- Installing package...
Finding update package...
Verifying update package...
E:failed to verify whole file signature
E:signature verification failed
Installation aborted.
A old thread on here says this: I had that problem 2 when I started. Turned out to be a recovery bug. With some batches of our phone it seems that you can only enter android recovery v3 and not cwm after rooting. Most kernels are not compatible with v3 only 2.
Source: http://forum.xda-developers.com/showthread.php?t=1995831
Is this correct/up to date? Or have I just done something wrong/missed out an important step? Do I need to flash a different kernal or something?
thanks alot
http://www.addictivetips.com/mobile/how-to-install-clockworkmod-recovery-on-samsung-galaxy-s-i9000/
pryerlee said:
http://www.addictivetips.com/mobile/how-to-install-clockworkmod-recovery-on-samsung-galaxy-s-i9000/
Click to expand...
Click to collapse
thanks man. Looks just the ticket. I have XXJU 2.36 so I am going to try this file CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.zip - do I need to reset to factory again before I do this (as its currently rooted)? or will that be ok?
No should be fine just to flash, no need to factory reset, CF-Root is a stock kernel with root and cwm recovery included (it's ok that you already have root) just flash the zip file and reboot. good luck
pryerlee said:
No should be fine just to flash, no need to factory reset, CF-Root is a stock kernel with root and cwm recovery included (it's ok that you already have root) just flash the zip file and reboot. good luck
Click to expand...
Click to collapse
This still isn't playing ball. I've tried a couple of times, although the instructions aren't that great: eg: To fix this, you will need to use the stock recovery option that says ‘apply update.zip from SD card’ or something similar
When the new kernal is applied a a new CWM Manager 2.0 app a Tweaks app and Superuser is added. I have downloaded ROM manager and downloaded and installed what is I assume to be the latest CWM. No new CWM app appears as an app. I then reboot into recovery using the 2nd option in ROM Manager and the same error message comes up and it is still the Android system recovery 3e.
The instructions say "you will need to do this twice when attempting to enter ClockworkMod Recovery for the first time"
Its not clear at all exactly that update needs applying but when I have tried the relevant ones it hasn't worked.
When entering CWM 3.0.0.5 (via volume up power boot) and selecting apply update from sdcard it then ended up with entering CWM version 2.1.5.2! – then there is another option to apply apply the update and it reverts back to CWM 3.0.0.5!
This is a mare!
ok another option is to flash with mobile odin (free in market) then install the flash kernel here http://bit.ly/17kEetk unzipped CF-Root and placed it in Mobile ODIN, when you open mobile ODIN it'll say you need to download extra data, but it's only if you're flashing firmware, you don't need to download the extra data just for flashing kernels so ignore it, flash it and Mobile ODIN will install CF-Root then it'll auto reboot, once rebooted, go into recovery mod and you should now have CWM as well as Root access.
pryerlee said:
ok another option is to flash with mobile odin (free in market) then install the flash kernel here http://bit.ly/17kEetk unzipped CF-Root and placed it in Mobile ODIN, when you open mobile ODIN it'll say you need to download extra data, but it's only if you're flashing firmware, you don't need to download the extra data just for flashing kernels so ignore it, flash it and Mobile ODIN will install CF-Root then it'll auto reboot, once rebooted, go into recovery mod and you should now have CWM as well as Root access.
Click to expand...
Click to collapse
Does that process get around the android recovery v3 error problem and get me to the latest version of CWM? (Is it not just flashing the same files using a different method?)
Also I understand the need to download and install Mobile Odin but I am confused though as you have linked to the following files:
MobileODIN_FlashKernel_I9000-v1.0.zip
MobileODIN_FlashKernel_I9000-v2.0.zip
unzipped these are APKs (not kernals? or are they and I'm missing something?) so do I download (presumably verison 2) and install these as an app as well? Do I then run the MobileODIN_FlashKernel app or something?
I have read this guide on Mobile Odin, which makes sense, its just the extra APK is confusing me!
http://www.shetalksandroid.com/2012...din-install-firmwares-flash-kernels.html.html
thanks
Unzip MobileODIN_FlashKernel_I9000-v2.0.zip and you'll get MobileODIN_FlashKernel_I9000-v1.0.apk, FlashKernels are special kernels used by Mobile ODIN to help flash the selected firmware if it cannot be done with the kernel you are currently running. The FlashKernel is used temporarily, it does not remain on the device after the firmware flashing is complete. Click on it to install it as a normal apk then install Mobile ODIN, next open Mobile ODIN select your CF-Root kernel (it needs to be unzipped) and flash it, after it has flashed the phone will reboot, once it has rebooted power off and boot into recovery mode, you should now be on CWM Recovery.
whatagonad said:
This still isn't playing ball. I've tried a couple of times, although the instructions aren't that great: eg: To fix this, you will need to use the stock recovery option that says ‘apply update.zip from SD card’ or something similar
When the new kernal is applied a a new CWM Manager 2.0 app a Tweaks app and Superuser is added. I have downloaded ROM manager and downloaded and installed what is I assume to be the latest CWM. No new CWM app appears as an app. I then reboot into recovery using the 2nd option in ROM Manager and the same error message comes up and it is still the Android system recovery 3e.
The instructions say "you will need to do this twice when attempting to enter ClockworkMod Recovery for the first time"
Its not clear at all exactly that update needs applying but when I have tried the relevant ones it hasn't worked.
When entering CWM 3.0.0.5 (via volume up power boot) and selecting apply update from sdcard it then ended up with entering CWM version 2.1.5.2! – then there is another option to apply apply the update and it reverts back to CWM 3.0.0.5!
This is a mare!
Click to expand...
Click to collapse
Try flashing a zImage via Heimdall. You could try this

Categories

Resources