Database Develop

[Q] i bricked my black...KDZ NOT working...pleaseeeee helpppp!!!!!

ok..i bricked my black and i have a big problem. i was on CM7 latest nightly build and i manually tried to change the font using root explorer. and the cell went into bootloop after i rebooted.
now, i tried to use the unbricking using the R&DTT, but i have the following erroor. the attached image is what i get.
i, infact have the b2c client installed .
please helpppp, please, please...ANY help is appreciated!!!!

achyut said:
ok..i bricked my black and i have a big problem. i was on CM7 latest nightly build and i manually tried to change the font using root explorer. and the cell went into bootloop after i rebooted.
now, i tried to use the unbricking using the R&DTT, but i have the following erroor. the attached image is what i get.
i, infact have the b2c client installed .
please helpppp, please, please...ANY help is appreciated!!!!
Click to expand...
Click to collapse
Servers are down anyway so you can't use R&D with B2C. Do you have adb installed? Also, try entering recovery by pressing volume down then power button, you might get lucky.

gabwerkz said:
Servers are down anyway so you can't use R&D with B2C. Do you have adb installed? Also, try entering recovery by pressing volume down then power button, you might get lucky.
Click to expand...
Click to collapse
1. servers are down: AWESOME!!!
2. ADB installed: NO!!!
3. vol down+power: NO LUCK
NUTSHELL: AM *&&^%^&*

Hey, tomorrow is a Monday. Im figuring you are within your warranty. Instead of waiting for the servers, which are up, btw, all you need to do is step into the LG service center. They'll replace the handset in 2 days. I got mine replaced a week ago.

shreyas99 said:
Hey, tomorrow is a Monday. Im figuring you are within your warranty. Instead of waiting for the servers, which are up, btw, all you need to do is step into the LG service center. They'll replace the handset in 2 days. I got mine replaced a week ago.
Click to expand...
Click to collapse
i thot of that, but since the phone is bootlooping CM7 bootscreen, i feel they are going to void my warranty!!!....were u rooted and yet got your handset replaced???....reply man!!!....am so tensed!!!

Try this :
1. R&D Tool must be Run As Administrator
2. B2CC notiagent must run (on taskbar)
3. Change Phone Mode to DIAG
see also THIS GUIDE

can anyone post the EXACT STEP BY STEP 2 unbrick the phone??
even running LGUpdate -> recovery phone didn't help.
it downloaded the update, updated the phone, but the cell won't boot!!!...only thing that changed is that the bootanimation loop has changed from CM7 to stock LG one. dats about it!!!....please help me guys!!!!...am so so so so worried!!!!...feel liek i was better off with the x10

I did down-grade CM7 to Stock ROM V10D use R&D Tools without problem. I saw your R&D tool pic, I suggest to you :
1. Use R&D tool again (because R&D tool is full flash).
2. Re-download kdz file stock ROM HERE (maybe your kdz file is broken)
3. All of that Windows Software must be run as administrator.
4. Change PhoneMode : CS_Emergency to be DIAG (see image of R&D that you uploaded)
ps. : Sorry for my bad english

here is the problem with me.
1. I HAVE THE DRIVERS, MSXML 4.0 AND THE B2C TOOL INSTALLED
2. I DID EVERYTHING MENTIONED IN THE GUIDE ABOUT THE WINDOWS ENABLER AND EVERYTHING.
3. THEN WHEN I START THE R&D TT or he UpTestEX_mod2_marwin.exe, it runs. i select the downloaded .kdz file, (mode is set as CS_Emergency) and then when i hit run CSE WEB UPGRADE TEST, it shows me the 2nd window where i should hit "UPGRADE START" and it runs the updater, however, when i run it, it says
"please install B2C CSMG CLIENT TOOL
SELECT TOOL -> B2C Client Setup Menu
but when select it from tools it says "B2C Tool Setup Complete"!!!!!.....what 2 do.....PLESASEE HELP...HELPPPPP!!!!

@achyut What window$ version do you have?

redy2006 said:
@achyut What window$ version do you have?
Click to expand...
Click to collapse
i have Windows 7 Ultimate_x64 on my laptop...however,i have the WIN 7 (_x86) on my desktop.
SOLVEDdon't know if it was specific to my laptop,but when i tried it on my desktop, it worked!!!! btw, i don't have the PC Suite installed on my desktop,if it makes any difference.

I use x86 version, and don't have problem. Perhaps it is related with x64 system, I don't know for sure.. But, I'm glad you've solved it...

SGS GT-i9000 fozen on the first boot screen (Galaxy S GT-i9000 SCREEN)

I own a Galaxy S GT-i9000( bought at SFR)
When I connect it to computer I get the prompt that tells to choose between Storage, Kies...
But whatever I choose the computer tells me USB Device not recognised.
Now I was stupid enough to do the following:
I managed to root using Z4root by copying the APK file on external sd .
I got rom manager and updated my recovery.
I updated using the CM10-unofficial rom that is in the development forum: http://forum.xda-developers.com/showthread.php?t=1775169
The Mobile Network was not working so I did the following
I restored the nand that i did in recovery and now the phone is frozen on the first boot screen (Galaxy S GT-i9000 SCREEN)
Now I can go to Download mode but I can't go to recovery mode.
Let me remind you that my USB data connection is not working. So even though I enter into the Download mode I am not able to use Odin. If you know somthing that I am not doing, let me know.
So now I am looking for a solution that would permit me to flash without USB or allow me to go to recovery mode. Or a tutorial on how to change the usb port myself.
Thanks in advance.

kigordid said:
So now I am looking for a solution that would permit me to flash without USB or allow me to go to recovery mode. Or a tutorial on how to change the usb port myself. Thanks in advance.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=29464733&postcount=10

You can try using Mobile Odin.
Also, you can try Heimdall method: https://www.fixmystuff.in/FMS_Forum...-flashing-to-original-rom-using-heimdall.126/

Hey
have you tried to connect it in Download mode??

Need more solutions
Thanks again to all of you that have answered me so fast.
Well I just finished trying all that you suggested.
unfortunately am still at the same point. Whatever I do, whatever drivers am putting in, cleaning inside the USB port with methylated spirit... Not getting Odin or Kies to detect it.
I read somewhere that when the data connection works, I should see the device named Samsung Device even before installing the drivers, but all I am getting is Unknown device. I still went ahead uninstalling and installing the drivers you provided and there is no successful outcome so far.
I still have faith. I have a little knowledge in electronics. I can open my phone and get to the usb port. My problem is I don't get any tutorial on how to replace the usb port. The thing is the connections are very tiny. I can also do with a bypass way that could make me install a 2nd usb port temporarily just long enough to flash the phone.
Or a hardware solution if I have to remove and flash a specific IC in a certain manner.
Thank you in advance.

help
hi there,
after doing alot of stuff to your phone that wasnt nessacary i'm not surprised it doesnt work er sorry . the only thing i can think of is the following whenever i have a problem with windows i go to linux, which is faster , much more efficient . so i suggest that you install linux ( ubuntu the best ) and try using odin with the linux version, it often detects things that windows doesnt see. other than that sorry cant think of anything else .
see ya

Trying it
thesmegger said:
hi there,
so i suggest that you install linux ( ubuntu the best ) and try using odin with the linux version, it often detects things that windows doesnt see.
see ya
Click to expand...
Click to collapse
Thank you.
Am going to boot on linux right away. I will let you know.

Back to zero
kigordid said:
Thank you.
Am going to boot on linux right away. I will let you know.
Click to expand...
Click to collapse
It doesn't change anything.
Am back to my start point.
Thank you though.

Anything Else?
Does anyone have something else to suggest or I should consider my phone dead?
Look like a quite number of people are having this same issue and haven't got over it.
I just hang on and appeal to all of you cos I know XDA is the best place where I can get a solution.
Lemme know any suggestion... even the ones you are not sure can help. Am willing to do anything.
Thanks again all of you.

hi
hi there
if all else fails there is a jig
http://forum.xda-developers.com/showthread.php?t=1402286
this forces your phone into download mode and will help for sofy bricks so look it up on the link and try that , sometimes on local forums like we have in france members will comme over and lend you one , or just buy one eyc .
hope that helped
see ya :good:

Uninstall from PC Kies, instal samsung drivers, then download and flash mod 2.3.4 xxjvp stock? / Or other, 3.PDA, PHONE, CSC / pit is 512 and re-partition and start to turn in Odin.

[Q] Problem with updating LG Optimus 4xHD

Hello
I recently got Optimus 4x HD and I was trying to upgrade software (now I have V10a) over the internet via PC suite and over the mobile phone...Each time I have problems, my mobile phone says that my phone is not registred and PC suite says that there is a problem and cant upgrade...
is there a solution of this problem?
how to register a product? over local version od lg.com or what? if thats the solution, I cant register my product because it's not listed yet in devices in my local lg.com
if someone knows the solution, please...I need help
thanks in advance

strange
Jouzofski said:
Hello
I recently got Optimus 4x HD and I was trying to upgrade software (now I have V10a) over the internet via PC suite and over the mobile phone...Each time I have problems, my mobile phone says that my phone is not registred and PC suite says that there is a problem and cant upgrade...
is there a solution of this problem?
how to register a product? over local version od lg.com or what? if thats the solution, I cant register my product because it's not listed yet in devices in my local lg.com
if someone knows the solution, please...I need help
thanks in advance
Click to expand...
Click to collapse
That is strange. I took my phone right out of box with v10a, right away it updated to v10b, so to v10d and then to v10f. I didnt register or anything at all.

alekthefirst said:
That is strange. I took my phone right out of box with v10a, right away it updated to v10b, so to v10d and then to v10f. I didnt register or anything at all.
Click to expand...
Click to collapse
well I know...there is no answer over the google either...no one has this kind of problem
I will keep searching

Have you tried to directly flash a .kdz file? That should help, as your device came with 10a it should be a normal one and no developer.

muellersmattes said:
Have you tried to directly flash a .kdz file? That should help, as your device came with 10a it should be a normal one and no developer.
Click to expand...
Click to collapse
I havent tried it yet...I will today when I come home...
I was researching a little...
how can I be sure that phone is not developer edition?
I got that phone for free from a cousine working in local lg office... he was saying that it's the final version...
there is a encription on the back of the model NOT FOR SALE...so that means it a developer edition, or not?
ofcourse, software is version v10a....
maybe it's not registred for sale so it wont update?
I found some tutorial, does someone know will that help and could I brick it this way? http://forum.xda-developers.com/showthread.php?t=1861942

Jouzofski said:
I havent tried it yet...I will today when I come home...
I was researching a little...
how can I be sure that phone is not developer edition?
I got that phone for free from a cousine working in local lg office... he was saying that it's the final version...
there is a encription on the back of the model NOT FOR SALE...so that means it a developer edition, or not?
ofcourse, software is version v10a....
maybe it's not registred for sale so it wont update?
I found some tutorial, does someone know will that help and could I brick it this way? http://forum.xda-developers.com/showthread.php?t=1861942
Click to expand...
Click to collapse
If you'll try the normal flash, you'll brick it almost for sure.
By that method you'll be able to flash it.
Pay attention to the tutorial before you start!

RuedasLocas said:
If you'll try the normal flash, you'll brick it almost for sure.
By that method you'll be able to flash it.
Pay attention to the tutorial before you start!
Click to expand...
Click to collapse
I did everything as in the tutorial...but I stopped at step 8...
I am using win 7, 64 bit edition and I connected to my laptop win xp 32 bit edition, I manage to install everything, but when I connect phone (vol up and usb cable) the computer never finds omap4430...when I look at device manager i get a new hardware for about 3 seconds and then everything dissapears...
I don't undestrand...
does it maybe has to be win 7 and 32 bit operational system or something else...
tnx anyway

Jouzofski said:
Each time I have problems, my mobile phone says that my phone is not registred and PC suite says that there is a problem and cant upgrade...
Click to expand...
Click to collapse
I got the same Message when I tried to check for updates. On my phone the solution was to enable OTA in the hidden menu.
Hidden Menu
WLAN Test
OTA Setting
Enable
Restart phone

blumenkasten said:
I got the same Message when I tried to check for updates. On my phone the solution was to enable OTA in the hidden menu.
Hidden Menu
WLAN Test
OTA Setting
Enable
Restart phone
Click to expand...
Click to collapse
I just tried it but no helpo for me here...thanks anyway

Jouzofski said:
I just tried it but no helpo for me here...thanks anyway
Click to expand...
Click to collapse
As far as I know, the flash method for developers phones must run in 32bit system.
About retail phones, just try to download the KDZ version you want to and flash it with the normal methode.
Good luck

RuedasLocas said:
As far as I know, the flash method for developers phones must run in 32bit system.
About retail phones, just try to download the KDZ version you want to and flash it with the normal methode.
Good luck
Click to expand...
Click to collapse
I tried everything for updating like developer and didn't succeded...then i decided to risk and tried it with the normal methode and it worked...

Jouzofski said:
I tried everything for updating like developer and didn't succeded...then i decided to risk and tried it with the normal methode and it worked...
Click to expand...
Click to collapse
Maybe even without sucess, when you flash by the "development way" (let's call it like that for now...), you overwrite the file system allowing to perform the normal flash after that.
Good for you.

ROM update stuck at S/W

Hi
Havn´t used my P990 for awhile, then heard that ICS was out so triede use LG Tool to update.
It started well, after dl. i got stuck at S/W scrren nothing happend for hours, so triede everything.
Ended up using Smartfaslh tool, then phone rebooted and i was back at 2.3.4
So again Lg Tool update, but no luck a critical error, so now i can´t update.
What can i do, the phone just restarts, the battery =? (i know its fully charged)
Im not a expert so be gentle with explanations.

SharDK said:
Hi
Havn´t used my P990 for awhile, then heard that ICS was out so triede use LG Tool to update.
It started well, after dl. i got stuck at S/W scrren nothing happend for hours, so triede everything.
Ended up using Smartfaslh tool, then phone rebooted and i was back at 2.3.4
So again Lg Tool update, but no luck a critical error, so now i can´t update.
What can i do, the phone just restarts, the battery =? (i know its fully charged)
Im not a expert so be gentle with explanations.
Click to expand...
Click to collapse
Hi mate, this All-In-One P990-Toolkit might help you.:good:

creison said:
Hi mate, this All-In-One P990-Toolkit might help you.:good:
Click to expand...
Click to collapse
Downloaded the official v30 rom and wanted to use option 6, so i could use a kdz file.
Get a script host file, saying the fil wasn´t found, its Automatic Offline Procedure.vbs
The file is there, under Tools.....
What can i then do???

SharDK said:
Downloaded the official v30 rom and wanted to use option 6, so i could use a kdz file.
Get a script host file, saying the fil wasn´t found, its Automatic Offline Procedure.vbs
The file is there, under Tools.....
What can i then do???
Click to expand...
Click to collapse
Have you try this LG_KDZ_FW-Update_OfflineFix?:good:

creison said:
Have you try this LG_KDZ_FW-Update_OfflineFix?:good:
Click to expand...
Click to collapse
Still the same....following the procedure in the word file, i still have to run automatic offline procedure.vbs
MSXML parser = ok
windows enabler = ok
USB debugging = ok
Running uptestex_mod2_Marvin.exe
Selectiing the dl. v30a.kdz and set to emergency
Clicking normal web upgrade test
Clicking upgrade start
It now opens LG software and yet again, please reconnect the phone, remove battery and try again.
I simple stuck and cant go further, the phone closes still adn reboots.

SharDK said:
Still the same....following the procedure in the word file, i still have to run automatic offline procedure.vbs
MSXML parser = ok
windows enabler = ok
USB debugging = ok
Running uptestex_mod2_Marvin.exe
Selectiing the dl. v30a.kdz and set to emergency
Clicking normal web upgrade test
Clicking upgrade start
It now opens LG software and yet again, please reconnect the phone, remove battery and try again.
I simple stuck and cant go further, the phone closes still adn reboots.
Click to expand...
Click to collapse
Hum try the methods in this post here if none of them work try with another cable doble check the computer driver seems something is geting corrupt in the phone and i dont think is the phone itself.
Goog Lucky :good:

SharDK said:
I simple stuck and cant go further, the phone closes still adn reboots.
Click to expand...
Click to collapse
I admire your patience, but are you interested in the end result, or in the process itself? Why not just try SmartFlash method, if you can't get this one to work? Extract BIN and FLS files from the KDZ, and flash them. For me, it works perfectly every time.

creison said:
Hum try the methods in this post here if none of them work try with another cable doble check the computer driver seems something is geting corrupt in the phone and i dont think is the phone itself.
Goog Lucky :good:
Click to expand...
Click to collapse
Result of Smarttools, looked like going good, then stopped, result added. Will try another.
I just want the phone to work proper again....

Tried again in another USB port, came a bit closer to the end.
Hmm, i don´t know what to say anymore.

SharDK said:
Tried again in another USB port, came a bit closer to the end.
Hmm, i don´t know what to say anymore.
Click to expand...
Click to collapse
These errors are not unusual, an the workarounds have already been posted... Two things you can try, both should work:
1. Flash one file at a time, e.g. FLS (baseband) first, and then the BIN (ROM itself).
2. Swap the files. Meaning, choose AP instead of CP, and vice versa. This way you can flash them both at once.

Cheers thanks a million, took 1 at a time and that worked. Android v. 4.04:good::good::good:

Did you try another cable?
Seems impedance problem as you already mention some progress after change the usb port.
Also try Nflash TG ICS28G it is a good idea, you can flash [ROM] TG P990 ICS V30A - Stable - Rom and Advanced Kernelfrom CWM after all.
---------- Post added at 08:06 PM ---------- Previous post was at 08:00 PM ----------
SharDK said:
Cheers thanks a million, took 1 at a time and that worked. Android v. 4.04:good::good::good:
Click to expand...
Click to collapse
Im glad you done :good:

creison said:
Did you try another cable?
Seems impedance problem as you already mention some progress after change the usb port.
Also try Nflash TG ICS28G it is a good idea, you can flash [ROM] TG P990 ICS V30A - Stable - Rom and Advanced Kernelfrom CWM after all.
---------- Post added at 08:06 PM ---------- Previous post was at 08:00 PM ----------
Im glad you done :good:
Click to expand...
Click to collapse
Didn´t have 1 that fit, so change 4 times USB port and when i got the first to go to 100% it then worked doing it in 2 steps.
It started fine, but didn´t see my wifi, anyway it looks a bit different from the old GB.

I see, im on TG V30a and very happy AWESOME rom pretty smoth and good battery life.

[Q] Windows phone 8.1 issue on samsung ativ s

Hello! Yesterday I tried to update to windows phone 8.1, but it bricked my phone! Now When I turn up it, it begins the update (gears appear) for some seconds then it shuts down. If it's in charging it reboots. The first time, a sad emoticon appeared while I was updating (like the windows 8 blue screen's one). Now I don't know what to do. I tried to follow this guide http://forum.xda-developers.com/showthread.php?t=2391138 but the links don't work. and I can't download from the russian site. Don't know what to do! Thanks to all will help me!

enryblack8 said:
Hello! Yesterday I tried to update to windows phone 8.1, but it bricked my phone! Now When I turn up it, it begins the update (gears appear) for some seconds then it shuts down. If it's in charging it reboots. The first time, a sad emoticon appeared while I was updating (like the windows 8 blue screen's one). Now I don't know what to do. I tried to follow this guide http://forum.xda-developers.com/showthread.php?t=2391138 but the links don't work. and I can't download from the russian site. Don't know what to do! Thanks to all will help me!
Click to expand...
Click to collapse
Go to the last page, a friendly user posted the links once again
I'd recommend to Flash Gdr2, so you can interop-unlock your phone, but this is not necessary!
Best regards!

thank you but...
s_habet said:
Go to the last page, a friendly user posted the links once again
I'd recommend to Flash Gdr2, so you can interop-unlock your phone, but this is not necessary!
Best regards!
Click to expand...
Click to collapse
Oh, thank you! Can anything go wrong? I don't know the % of remaining battery on my phone. If something goes wrong, should I try again until it works? ...and, another thing: considering my situation, do I have to select a recovery in the program.
Ps is the csc unic in a state? For example what is the italian one?
Sorry for all these questions and thank you again!

s_habet said:
Go to the last page, a friendly user posted the links once again
I'd recommend to Flash Gdr2, so you can interop-unlock your phone, but this is not necessary!
Best regards!
Click to expand...
Click to collapse
uh, another thing. I've got problems with drivers. Could I install a more recent version. The guide in that article you linked me, doesn't work.

Hey ?
Actually, I'd recommend to ensure that the battery is full. I think if the flashing was interrupted and thus the mobile didn't work anymore, you could repeat flashing and it should work, but I haven't tested that and wouldn't recommend it at all!
The CSC is in the mbn (?) file, there are several CSC's to choose from. Look in the Developer forum, there are also CSC that are already interop-unlocked!
For installing the driver, you need to turn off signature checking. You do that by booting Windows 8(.1) and pressing F8, then search the option that temporarily disables driver checking.
Hope everything works fine!