Hello! Yesterday I tried to update to windows phone 8.1, but it bricked my phone! Now When I turn up it, it begins the update (gears appear) for some seconds then it shuts down. If it's in charging it reboots. The first time, a sad emoticon appeared while I was updating (like the windows 8 blue screen's one). Now I don't know what to do. I tried to follow this guide http://forum.xda-developers.com/showthread.php?t=2391138 but the links don't work. and I can't download from the russian site. Don't know what to do! Thanks to all will help me!
enryblack8 said:
Hello! Yesterday I tried to update to windows phone 8.1, but it bricked my phone! Now When I turn up it, it begins the update (gears appear) for some seconds then it shuts down. If it's in charging it reboots. The first time, a sad emoticon appeared while I was updating (like the windows 8 blue screen's one). Now I don't know what to do. I tried to follow this guide http://forum.xda-developers.com/showthread.php?t=2391138 but the links don't work. and I can't download from the russian site. Don't know what to do! Thanks to all will help me!
Click to expand...
Click to collapse
Go to the last page, a friendly user posted the links once again
I'd recommend to Flash Gdr2, so you can interop-unlock your phone, but this is not necessary!
Best regards!
thank you but...
s_habet said:
Go to the last page, a friendly user posted the links once again
I'd recommend to Flash Gdr2, so you can interop-unlock your phone, but this is not necessary!
Best regards!
Click to expand...
Click to collapse
Oh, thank you! Can anything go wrong? I don't know the % of remaining battery on my phone. If something goes wrong, should I try again until it works? ...and, another thing: considering my situation, do I have to select a recovery in the program.
Ps is the csc unic in a state? For example what is the italian one?
Sorry for all these questions and thank you again!
s_habet said:
Go to the last page, a friendly user posted the links once again
I'd recommend to Flash Gdr2, so you can interop-unlock your phone, but this is not necessary!
Best regards!
Click to expand...
Click to collapse
uh, another thing. I've got problems with drivers. Could I install a more recent version. The guide in that article you linked me, doesn't work.
Hey ?
Actually, I'd recommend to ensure that the battery is full. I think if the flashing was interrupted and thus the mobile didn't work anymore, you could repeat flashing and it should work, but I haven't tested that and wouldn't recommend it at all!
The CSC is in the mbn (?) file, there are several CSC's to choose from. Look in the Developer forum, there are also CSC that are already interop-unlocked!
For installing the driver, you need to turn off signature checking. You do that by booting Windows 8(.1) and pressing F8, then search the option that temporarily disables driver checking.
Hope everything works fine!
Related
This is KDZ_FW_UPD application translated to English. Also it has the fix for disabled buttons included (so you don't need to use Windows Enabler) and it has a few more options.
Thanks buddy! A very handy tool, now in ENGLISH!
thank u very much
What must I select on PhoneMode ???
Avalox2k said:
What must I select on PhoneMode ???
Click to expand...
Click to collapse
Leave it set to DIAG for normal flashing. Also check that you have MSXML 4.0 SP3 Parser and .NET Framework 3.5 installed before flashing.
There is some information about it in 4pda.ru forum:
DIAG - standard flashing mode for phones which are turned on.
EMERGENCY - mode for flashing phones in Emergency (Download) Mode.
CS_EMERGENCY- same thing, but appears to be for non-working phones.
Use last one only in worst case scenario.
Reading phone information fail
Hello,
sorry for my english,when i want read phone information the software bugging.
thanks man
Wonderful thanks a lot, it's easer in english
thank u so much
Hi,
Downloaded the file but what is .7z format?
Forget the above. Found a later version of Winzip that can deal with .7z!
Awesome I was waiting for ^^ thank you
One more ask, during connection with LG PC Suit all seems to be fine, but when I finally pick any option I can see info: check your connection...blah blah blah.
Do you think that it will be a problem during flashing with KDZ?
I've tried to flash my LGP509 with this program but it keeps crashing on me. Tried it on two different Windows 7 computers with the same result. Is there a walkaround and does anyone here have advice? I'm getting frustrated and my phone is bicked
Thanks!
ZduneX25 said:
Awesome I was waiting for ^^ thank you
One more ask, during connection with LG PC Suit all seems to be fine, but when I finally pick any option I can see info: check your connection...blah blah blah.
Do you think that it will be a problem during flashing with KDZ?
Click to expand...
Click to collapse
Phone read info is not working
But still u can use this program to flash your phone
i have told you before this is for gt540!
find your phone model on xda
thanks, buddy. I'd like to say it works like a charm.
Im having problem using the kdz. Whenever I update my gm730, the computer keeps shutting off, not finishing the update. What do you think is wrong with it? I first used Lgusercstool. That's when i bricked my phone.
cnergy_14 said:
Im having problem using the kdz. Whenever I update my gm730, the computer keeps shutting off, not finishing the update. What do you think is wrong with it? I first used Lgusercstool. That's when i bricked my phone.
Click to expand...
Click to collapse
That's because this is for the GT540. NOTHING ELSE
I see.. What can I use for LG GM730?
gt540 said:
leave it set to diag for normal flashing. Also check that you have msxml 4.0 sp3 parser and .net framework 3.5 installed before flashing.
There is some information about it in 4pda.ru forum:
diag - standard flashing mode for phones which are turned on.
emergency - mode for flashing phones in emergency (download) mode.
cs_emergency- same thing, but appears to be for non-working phones.
Use last one only in worst case scenario.
Click to expand...
Click to collapse
this did not work 4 me it went thru on all three and still no ime no battery stat and unknown baseband someone plz help plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
gt540 said:
Leave it set to DIAG for normal flashing. Also check that you have MSXML 4.0 SP3 Parser and .NET Framework 3.5 installed before flashing.
There is some information about it in 4pda.ru forum:
DIAG - standard flashing mode for phones which are turned on.
EMERGENCY - mode for flashing phones in Emergency (Download) Mode.
CS_EMERGENCY- same thing, but appears to be for non-working phones.
Use last one only in worst case scenario.
Click to expand...
Click to collapse
what if i have .net framework 4.0
Hey guys,
So I had this problem with my 4x because of rooting it there was no baseband atleast it was unkown. I followed a guide but that didn't help. I tried Lg Flash Tool but that gives me a Download error after some seconds. Then I tried putting back the orginal KDZ but it says everything worked but the phone won't reboot like it should. Waited 20 mins to do something.
Running Windows 8 64x
I have no idea what to do now, please help.
win 8?
just flash again but on win 7 or XP...On win 8 is not working lg tools...
tabator said:
just flash again but on win 7 or XP...On win 8 is not working lg tools...
Click to expand...
Click to collapse
Done that it gives an failure after 10-20 seconds with Download Failure..
....
Try this http://forum.xda-developers.com/showthread.php?t=2069723
tabator said:
Try this http://forum.xda-developers.com/showthread.php?t=2069723
Click to expand...
Click to collapse
Did that phone doesnt get in S/W Wihout battery or it will for 2 seconds and then it will show a black screen. And it never reboots
...
Elqauto said:
Did that phone doesnt get in S/W Wihout battery or it will for 2 seconds and then it will show a black screen. And it never reboots
Click to expand...
Click to collapse
Works for me on XP with proper drivers...without any problems...
tabator said:
Works for me on XP with proper drivers...without any problems...
Click to expand...
Click to collapse
Are you running it inside a Virtual Machine?
Elqauto said:
Did that phone doesnt get in S/W Wihout battery or it will for 2 seconds and then it will show a black screen. And it never reboots
Click to expand...
Click to collapse
You're doing something wrong. Follow the instructions to the letter, don't rush and it will work.
SimonTS said:
You're doing something wrong. Follow the instructions to the letter, don't rush and it will work.
Click to expand...
Click to collapse
Tried that it only gets a purple/white screen.
Elqauto said:
Tried that it only gets a purple/white screen.
Click to expand...
Click to collapse
running on old lap top XP... try to press and hold [vol -] and [power] until you got the "android recovery figure" and wait until they reboot again, but i think u doing something wrong or you dont have valid drivers...
tabator said:
running on old lap top XP... try to press and hold [vol -] and [power] until you got the "android recovery figure" and wait until they reboot again, but i think u doing something wrong or you dont have valid drivers...
Click to expand...
Click to collapse
It won't even go there. It quickly shows the LG Logo and all the sudden it gets to S/W Upgrade. Can't get in Recovery or anything else.
Whenever I try Flash Tool it gives me a Download Fail with error code 210? Help please.
try to change the phonemode on software update(KDZ) from DIAG to EMERGENCY. that saved me a week ago .i had the same problem
Similar Problem...HELP
Hello, I seem to be having a similar problem. I tried KDZ, as per the flashing tools page, but after running the KDZ unpacking and then it stops at paramenter 210. The phone screen stays at S/W Upgrade, and nothing else happens. The KDZ log stays at parameter 210, and goes no further. I am following all the exact steps. Also in the KDZ Phone Information link/Button, no info shows up about Phone, meaning all fields are blank. Back ground Information: i had before a CUSTOM ROm 4.4+ & later 5.0+ installed, but somehow after some time, my phone stopped recognising any SIMs. Android would work but no Sim was working. I thought it was a hardware defect, but later i checked in Settings> Status, there was no IMEI showing. Something had messed up, I read up that reinstalling the stock ROM may solve the issue, so i tried it. But all i have now is that a phone that doesnt boot up, always shows S/W Update screen. And with KDZ only goes up till parameter 210 (in software status log) and doesent go further. Tried all DIAG/Emergency etc. Is my phone bricked or is there a solution ? Please HELP ..... Any help/suggestion appreciated. Thx
Ofkhan said:
Hello, I seem to be having a similar problem. I tried KDZ, as per the flashing tools page, but after running the KDZ unpacking and then it stops at paramenter 210. The phone screen stays at S/W Upgrade, and nothing else happens. The KDZ log stays at parameter 210, and goes no further. I am following all the exact steps. Also in the KDZ Phone Information link/Button, no info shows up about Phone, meaning all fields are blank. Back ground Information: i had before a CUSTOM ROm 4.4+ & later 5.0+ installed, but somehow after some time, my phone stopped recognising any SIMs. Android would work but no Sim was working. I thought it was a hardware defect, but later i checked in Settings> Status, there was no IMEI showing. Something had messed up, I read up that reinstalling the stock ROM may solve the issue, so i tried it. But all i have now is that a phone that doesnt boot up, always shows S/W Update screen. And with KDZ only goes up till parameter 210 (in software status log) and doesent go further. Tried all DIAG/Emergency etc. Is my phone bricked or is there a solution ? Please HELP ..... Any help/suggestion appreciated. Thx
Click to expand...
Click to collapse
Try using LG Flash-Tool & Follow this below link, may be this might help you out
http://forum.xda-developers.com/showthread.php?t=2179126
and still the problem remain same follow post #7 by RuedasLocas.
Read every post over there and you may find solution to it.
If any of this method help you out thanks my post and thanks the other post that had help you out.
Salman Al-Badgail said:
Try using LG Flash-Tool & Follow this below link, may be this might help you out
http://forum.xda-developers.com/showthread.php?t=2179126
and still the problem remain same follow post #7 by RuedasLocas.
Read every post over there and you may find solution to it.
If any of this method help you out thanks my post and thanks the other post that had help you out.
Click to expand...
Click to collapse
I tried the LG Flash Tool as mentioned in the link. But my update only runs till 10%, and shows 0Kb / 0Kb, and then after 18s returns an error, Failed !. Also there are no 3 ports open as mentined in one of the posts when all ports 1-16 are used/ticked in options. I have only read half of the posts in the link, so maybe there is a solution, otherwise it seems something has gone wrong in the phone
Thanks for the suggestions and link, although not working for me.
Ofkhan said:
I tried the LG Flash Tool as mentioned in the link. But my update only runs till 10%, and shows 0Kb / 0Kb, and then after 18s returns an error, Failed !. Also there are no 3 ports open as mentined in one of the posts when all ports 1-16 are used/ticked in options. I have only read half of the posts in the link, so maybe there is a solution, otherwise it seems something has gone wrong in the phone
Thanks for the suggestions and link, although not working for me.
Click to expand...
Click to collapse
Try reading the others posts in from there,this might take some time but i am sure this may help you.
Also try changing PC use WIN-7 .
Try changing usb ports too.
I too have the same problem like yours but at the end it was solved.
Dont stop looking for
I had the same situation and the following solved my problem, http://forum.xda-developers.com/showthread.php?t=2179126
Dnelub said:
I had the same situation and the following solved my problem, http://forum.xda-developers.com/showthread.php?t=2179126
Click to expand...
Click to collapse
Already Posted link in #15
Salman Al-Badgail said:
Try using LG Flash-Tool & Follow this below link, may be this might help you out
http://forum.xda-developers.com/showthread.php?t=2179126
and still the problem remain same follow post #7 by RuedasLocas.
Read every post over there and you may find solution to it.
If any of this method help you out thanks my post and thanks the other post that had help you out.
Click to expand...
Click to collapse
I was reading post all the time, and facing the same problem in S/W, at last i found the solution by following post 7.
3 ports helped.
Thanks
While i was watching a video on facebook my phone randomly crashed, i waited for the phone to die as i didn't know about the soft reset i could do, and ever since then the phone has not booted past the red motorola logo, i've looked up a few ways to 'unbrick' my phone but they all required me to be able to go onto the device and enable USB debugging mode, which i obviously can't do. I have tried 1 other way which was to try and run "xFSTK-SoC-Driver-Setup-1.0.3.exe" and see if the bootloader would be reinstalled but i keep getting a message saying "libusb0.DLL is missing" and when i download the .DLL online it still says the message no matter where i put it.
I can get into the fastboot menu and i have formatted it to see if there was something on the phone that was stopping it from booting, but alas i am still here with a 'bricked' phone. Hopefully someone can help me get this sorted as i'd rather not have to be on my Nokia C1-01 for long
Thanks in advance
Hi
Thanks for writing to us at XDA Assist. Please standby while we have your thread/question moved to the appropriate sub-forum for your device.
For future reference you can find your device sub-forum here (bookmark/subscribe this):
Motorola RAZR i
Within that section you will find a dedicated q&a sub-forum (this is where your thread is going to be moved to):
RAZR i Q&A, Help & Troubleshooting
Good luck!
Transmitted via Bacon
MrWafWaf said:
While i was watching a video on facebook my phone randomly crashed, i waited for the phone to die as i didn't know about the soft reset i could do, and ever since then the phone has not booted past the red motorola logo, i've looked up a few ways to 'unbrick' my phone but they all required me to be able to go onto the device and enable USB debugging mode, which i obviously can't do. I have tried 1 other way which was to try and run "xFSTK-SoC-Driver-Setup-1.0.3.exe" and see if the bootloader would be reinstalled but i keep getting a message saying "libusb0.DLL is missing" and when i download the .DLL online it still says the message no matter where i put it.
I can get into the fastboot menu and i have formatted it to see if there was something on the phone that was stopping it from booting, but alas i am still here with a 'bricked' phone. Hopefully someone can help me get this sorted as i'd rather not have to be on my Nokia C1-01 for long
Thanks in advance
Click to expand...
Click to collapse
Try to use RSDlite to install right version of your ROM.
timmaaa said:
Hi
Thanks for writing to us at XDA Assist. Please standby while we have your thread/question moved to the appropriate sub-forum for your device.
For future reference you can find your device sub-forum here (bookmark/subscribe this):
Motorola RAZR i
Within that section you will find a dedicated q&a sub-forum (this is where your thread is going to be moved to):
RAZR i Q&A, Help & Troubleshooting
Good luck!
Transmitted via Bacon
Click to expand...
Click to collapse
Thank you for that i am new to this forum so wasn't exactly sure where to post.
Lucki_X said:
Try to use RSDlite to install right version of your ROM.
Click to expand...
Click to collapse
I have RSDLite installed on my computer, but every single video about how to use it is in Spanish, and i don't speak Spanish so i have no idea, i'm also new to this so i have no idea where to get the ROM from or what to do with it whence i have it.
MrWafWaf said:
I have RSDLite installed on my computer, but every single video about how to use it is in Spanish, and i don't speak Spanish so i have no idea, i'm also new to this so i have no idea where to get the ROM from or what to do with it whence i have it.
Click to expand...
Click to collapse
Search here for answers you need http://forum.xda-developers.com/razr-i/general/index-razr-t2832722
Some of the ROM you can download here http://forum.xda-developers.com/showthread.php?t=2239706
I don't know where you can find others. I'm sorry.
Lucki_X said:
Try to use RSDlite to install right version of your ROM.
Click to expand...
Click to collapse
Lucki_X said:
Search here for answers you need http://forum.xda-developers.com/razr-i/general/index-razr-t2832722
Some of the ROM you can download here http://forum.xda-developers.com/showthread.php?t=2239706
I don't know where you can find others. I'm sorry.
Click to expand...
Click to collapse
Thanks for the information but to me that is just words and links, i have no idea what to download, what i need to be looking into, how to use RSDLite, i'm more a visual learner so i learn via watching (im actually a 90% visual learner) and the fact i have no background with this it is relatively confusing
MrWafWaf said:
Thank you for that i am new to this forum so wasn't exactly sure where to post.
Click to expand...
Click to collapse
No problems at all, that's exactly what XDA Assist is here for
Good luck!
Hi MrWafWaf,
Here some extra help.
The things we are going to do is using RSD-Lite to restore your phone if it only has software problems. And we suspect it has that.
What u need for it are the following:
- RSD-Lite from here, unzip and install
- USB drivers: 32Bits or 64bits windows, and install it
- The firmware, this is the difficult part. U need the one from your country. If u got it wrong, it will maybe not be fully optimized for your country and language. Allways take the latest, in this case one with '9.8.2I' in it. (need help, say from where you from, carrier and if u buyed it from a carrier or retail. Maybe we can say which one u need)
So u now have RSD-Lite installed, the drivers installed and a zip file with the latest firmware.
Now see this thread: here
It's about using RSD-Lite. U already did step 1 and 2 from the 6 steps (not numbered, in quote) short guide.
Fastboot mode: Getting into it;
To get in AP Fastboot mode from power off: Hold Powerbutton + volume down. By holding those 2 the phone will boot and after a few seconds reboot. At the time the phone reboots and vibrates release the powerbutton. Now u will be in fastboot mode with all those text lines.
To get in AP Fastboot when the phone is on the (un)lock bootlogo: Hold powerbutton + volume down + volume up. Keep holding it. At the moment the phone reboots, release the powerbutton and volume up. KEEP holding the volume down button. It will now boot in fastboot mode.
Good luck. For the fastboot mode, u may need to try it a few times before it works. But i can assure you it always will work unless u have a hardware problem.
Hello everyone. I updated my rooted OP3T (with TWRP installed for recovery) to OOS 4.0.1(I think? I know for sure it was 4.0.x) a week or so ago using a VPN as I live in the US and today I got the new update for whatever version that was about 30 mb, and after I rebooted I got stuck booting into TWRP so I followed the guide linked underneath here and got up to step 12 (flashing beta 9) and after swiping to restart my phone will not turn on in any way, shape, or form. Whenever I plug it in/unplug it from my computer I'll still get the Win10 device connected/disconnected sound and if I hold the power button for long enough while it's plugged in I'll get another device connected sound or disconnected, usually followed by the opposite sound. There doesn't seem to be a pattern to the sounds, but if anyone knows what's happening I really need help with this as it's the only phone I was able to afford and if it's bricked I don't know if I have the money for another one. Thanks
https://forum.xda-developers.com/showpost.php?p=70102813&postcount=5
Lol no wonder your phone doesn't work anymore. You flashed the beta to the OP 3 onto your 3T. Use this to fix your phone.
Edit: Sorry if this was of use to some people when it was deleted.
Just Passing By said:
Lol no wonder your phone doesn't work anymore. You flashed the beta to the OP 3 onto your 3T. Use this to fix your phone.
Click to expand...
Click to collapse
I tried to use that thread, but my phone wouldn't show up underneath Unknown Devices, in fact unknown devices would never come up at all. my pc is still in test mode from this :/
Don't worry if it doesn't appear under unknown devices. Just use the tool. A lot of what the instructions say is unnecessary. Just make sure that when you plug in your phone that one of the ports becomes "active" (I haven't had to use this tool in months, so I'm not sure exactly what it's supposed to say exactly) and press the start button.
Edit: Sorry if this was of use to some people when it was deleted.
ok. I 'll download the tool and get back to you after trying it.
edit:that worked! you are my new favorite person.
thank you so much )))))))))
Deleted
WAIT
Just Passing By said:
Deleted
Click to expand...
Click to collapse
WHY IS THIS DELETED? IM having the same problem what did you do please save me as well
Sounds like you flashed the wrong version of Oneplus 3 firmware to your phone. Do you have a 3 or a 3t? If you flash the incorrect one you will get exactly the unbootable state you describe. In that case you will have to use Qualcomm MSM Downloader tool to flash back the correct ROM and firmware partitions to get it running again. Just download the correct MSM recovery package for your phone and follow the instructions in the thread.
My Google Maps was acting up (as if it had no GPS signal) so I decided to uninstall it and try installing the app again. What a bad decision! The phone turned off half way thru the app removal and now it only shows the Android welcoming screen and a triangle warning. I can't figure out a way to get it back to properly boot.
I've tried the following:
- removed SIM
- removed SD card
- hold POWER & volume UP
- hold POWER & volume DOWN
If I try to turn it on, it will show Android screen then triangle warning then android screen and back to triangle as if in a loop - is this what a bootloop means? Oh geez...
The phone was completely stock FW with Sony updates, so whatever is the latest updates from Sony, the phone has it.
Does anyone know what is happening and how to fix this?
Thanks in advance.
OldSkewler said:
My Google Maps was acting up (as if it had no GPS signal) so I decided to uninstall it and try installing the app again. What a bad decision! The phone turned off half way thru the app removal and now it only shows the Android welcoming screen and a triangle warning. I can't figure out a way to get it back to properly boot.
I've tried the following:
- removed SIM
- removed SD card
- hold POWER & volume UP
- hold POWER & volume DOWN
If I try to turn it on, it will show Android screen then triangle warning then android screen and back to triangle as if in a loop - is this what a bootloop means? Oh geez...
The phone was completely stock FW with Sony updates, so whatever is the latest updates from Sony, the phone has it.
Does anyone know what is happening and how to fix this?
Thanks in advance.
Click to expand...
Click to collapse
Reflash a system.sin, that should get it going again.
FYI for anyone coming across this problem i down the road : I could not figure out what /how to do the system.sin but I was able to run the Xperia Companion and repair the phone. I basically downloaded the Xperia Companion from Sony website, run the repair tool, connected the phone and followed the instructions.
It erased all settings and apps though, which I understood it would've happened but I assumed Sony had my backup online. Apparently not so I will need to work on it.
Good luck!
OldSkewler said:
FYI for anyone coming across this problem i down the road : I could not figure out what /how to do the system.sin
Click to expand...
Click to collapse
Had you of asked I would have said use Newflasher, which would have simply reflashed the system keeping all your data intact. PC Companion should be a last resort, but even then I prefer the Flashtool or Newflasher.
SXUsr said:
Had you of asked I would have said use Newflasher, which would have simply reflashed the system keeping all your data intact. PC Companion should be a last resort, but even then I prefer the Flashtool or Newflasher.
Click to expand...
Click to collapse
Really, huh? A little late for that, isn't it?
Now let me ask you this here: did it sound from my previous post that I knew anything about system.sin, flashtool or newflasher? I guarantee you that I didn't know then and I still don't know now. And that is on me, no questions about that. So why pretend you tried to help? Had you tried to actually help, perhaps you would've said something else .
OldSkewler said:
Really, huh? A little late for that, isn't it?
Click to expand...
Click to collapse
Clearly.
OldSkewler said:
Now let me ask you this here: did it sound from my previous post that I knew anything about system.sin, flashtool or newflasher?
Click to expand...
Click to collapse
You've got 80+ posts on a mobile developers site, regardless of whether you knew or not, you should know by now that asking questions and/or reading helps you learn.
OldSkewler said:
So why pretend you tried to help?
Click to expand...
Click to collapse
I did try to help, I told you what to do but you thought it best not to ask any questions about what I posted on this developer forum and did your own thing, which yes, is on you, and losing data by not seeking to learn more about what was posted, is a harsh lesson to learn.
So there, all there of your questions answered, just a shame you didn't think to ask the right ones before losing your data.
SXUsr said:
So there, all there of your questions answered
Click to expand...
Click to collapse
All good brother, I know what you are looking for and I just gave it to you: another THANKS for your HUGE collection.
Cheers!
OldSkewler said:
All good brother, I know what you are looking for and I just gave it to you: another THANKS for your HUGE collection.
Cheers!
Click to expand...
Click to collapse
These days, the only thing I'm looking for is to help (and continue to learn). I joined this site as a newb looking to modify an X10, and since then I've learnt how to modify every device you see listed in my sig, and have done so by continuing right up until the present day by asking questions. I've helped countless amount of people, contributed where I can, and will continue to do so. But if you (or anyone) wants to be arsy or argumentative, I can do that too. :good:
SXUsr said:
These days, the only thing I'm looking for is to help (and continue to learn). I joined this site as a newb looking to modify an X10, and since then I've learnt how to modify every device you see listed in my sig, and have done so by continuing right up until the present day by asking questions. I've helped countless amount of people, contributed where I can, and will continue to do so. But if you (or anyone) wants to be arsy or argumentative, I can do that too. :good:
Click to expand...
Click to collapse
Yea, well said mate. Bit of courtesy goes a long way n u did try to help n u helped me out aswell by informing me about Newsflasher and Flashtool so thanks there mate.