Related
This is a 2-part dilemma...
1.) is there a way to use my Wi-fi and data plan as a gateway for internet access with the computers in my home? I want to be able to turn on the Wi-fi, and the phone will become an access point and its internet connection comes from my data plan... I guess this can be done with a T-mobile G1.
2.) the way I do it now is that I hook it up via USB to a computer, and that works pretty well. Problem is, if I disconnect it via software function on the phone or just yank the USB plug out, I have to re-boot my phone before the internet sharing will work again. This gets annoying. Anyone else experience this and/or know if there's a fix?
Or am I just dumb and want everything on a silver platter?
are these computers connect in a network. I am sure it can easily be done by internet connection sharing just have all the computers connect to your pc for a connection.
I thought about doing that--basically an internet share to an internet share. That WOULD work, but I was hoping for something a bit simpler. i am not a hardcore computer user like I was back in the day where I had to have at least 3 computers running 24/7 in order to cope with life. LOL. I was hoping for a setup where I can just walk in the door from a crappy day at work, plug my phone into the charger where it gets its best signal, and just leave it there and the rest will take care of itself. I am close to being able to do that with my Xlink bluetooth cellular gateway. Once I am home, there's no reason why I have to carry my phone around the house, as my hard-wired phones in the house ring through my cellular and I can make calls from them
The other option is to quit being a cheap turd and get a $30/mo internet connection for my computers, which is faster than the EDGE service I get here at home. But I live alone and don't download big stuff anymore or play multiplayer games, etc
I think the concept in question is one that has been batted around here for some time: Can the Kaiser be used as an access point with an internet connection?
As far as anyone's been able to tell, no. The phone's wifi chip(or part of a chip that does wifi) would need to support AP mode (access point mode) where in it receives and routes multiple wifi connections' data between each other and the GPRS hardware. As far as anyone's been able to tell, the wifi capabilities in the phone are limited to single-connection only, so allowing multiple devices to connect (or even 1, unless the desired device can get internet via adhoc or bluetooth) is not possible.
You can use the WiFi connection sharing. What it does is take your EDGE or 3G connection and set your phone up as an "access point". I put that in parenthesis because it creates an "ad-hoc" network that only certain devices can detect and connect to. Ad-Hoc is a device to device network, where the normal is infrastructure mode. Also being the device it is, I'm not sure if it's going to be an intelligent network device, IE.. iTunes music sharing between local connected clients. But you can most certainly share your connection with your laptops or desktops if they have WiFi. I'll see if I can find the cab for you and post it here.
EDIT: Here you go... http://forum.xda-developers.com/showpost.php?p=4175565&postcount=90
Cool. I will look into that! I pretty much only have one computer running at a time these days, and the EDGE connection isn't all that fast to be sharing it among multiple computers anyway.
why...
Hi,
Not sure if i understand... why would someone use the "crappy" internet connection of a phone to get internet access to your home network...
It's 2009. Why not get a decent cable or DSL account
jeen said:
Hi,
Not sure if i understand... why would someone use the "crappy" internet connection of a phone to get internet access to your home network...
It's 2009. Why not get a decent cable or DSL account
Click to expand...
Click to collapse
$ 30.00 for your phone data connection + $ 45.00 for your home cable/DSL connection = $75.00 per month, as opposed to just $30.00 for both.
To some people $ 45 dollars a month is a lot of money to save no matter how slow the connection is.
I am no expert but I found this software here a while ago and really liked it. There is an older version that is legally free but the new one is pay, try the trial.
http://www.wmwifirouter.com/
-Max
jeen said:
Hi,
Not sure if i understand... why would someone use the "crappy" internet connection of a phone to get internet access to your home network...
It's 2009. Why not get a decent cable or DSL account
Click to expand...
Click to collapse
Or you're like me and cant get anything but satellite internet where I live, which is way more expensive. Yet I get 3G just fine =)
WMWifiRouter
I like WMWifiRouter pretty well. It drains my battery like crazy, but when I have my phone plugged in, it's okay. Without being plugged in, my battery loses about 20% over ten minutes. Also, the free version doesn't really come with any admin features. The router is public and there's no way to see who's connected. Other than that, it's great!
Hey guys, I'm a long time lurker, first time thread-starter, and I hope there is a simple solution to this.
This is more of a proof-of-concept question, and since the PS3 is capable of connecting to a tethering application I figured an XB could as well.
Recently, I updated my Captivate's ROM to the SREv1.3.1c (it was the ROM before he renamed it to Cognition). One of the added benefits was the addition of the Mobile Access POint, which is way better than PDANet in my opinion, but I digress.
Anyway, I've managed to turn the AP on and get it to connect to a PS3 with no issues and very little lag, which was awesome. However, the XBox is being a pain in the ***. i can go to my network connections on the XB, and my wireless attachment "sees" the connection just fine. It also connects and pulls both a IP and DNS server address. I even get 5 bars of great signal.
But when I run a XBL test, when it tries to connect to the internet it craps the bed and does nothing. Now, I've seen people get XBL to connect over similar tethering apps, even PDANet with its shaky connection issues, but I can't seem to figure this one out. As far as I can tell, maybe 3G has too high of a latency to be compatable, but I figured I'd ask the experts of XDA. Can anyone help?
Did I forget to say please or something? Any pointers?
Hey just wondering what is your configuration. like are you connecting with wi-fi from the phone, do you have a laptop to use? that is one of the easiest ways. or are you just usb direct into the console?
Well presently I'm using MobileAP which broadcasts a wifi signal that my laptop can pick up (it's how I'm typing this at the moment as well). It can be seen, like I said, but the XB won't get past the internet part of the diagnostic test.
I also had PDAnet installed a while ago so I know how to usb tether but couldnt get that to work on XBL either.
Hi Guys
I have been using my Note for around 3 months and today it has just stopped working on WiFi at home - all ok at work just gets stuck at obtaining IP address. Nothing has been changed on the phone or the BT Home hub no updates it just wont connect
Any ideas???
Many thanks
SG
have you tried rebooting your router?
Hi,
Have rebooted router and still no good. Yesterday my Note connected to WiFi at work No probs. Got home and it got stuck on obtaining IP. Today get to work and my Note will Not connect to work WiFi now either Same prob stuck at obtaining IP have restarted the work router also still no help. Network Key is correct or it would not get to obtaining IP any ideas on whats the problem?
Had a look round seems to be a problem on the Galaxy SII also. Just for info I have not added any new apps for days.. must be the phone buy why?
Any ideas?
Thanks
S
Lets try this:
Check whether your laptop can get an IP from your wifi.
I. YES
- Turn on wifi on your note.
- Go to Applications -> Settings -> Wifi settings.
- Look down at Wifi network.
- Touch into the name of your wifi then choose "Forget network".
- Turn off wifi on your note.
- Turn it on again.
- Enter the key and see what's happen.
II. NO
- Check your router configuration.
If you hav have enabled mac protection on router, reset it.
Sent from my GT-N7000 using xda premium
Hi,
Laptops x3 and other peoples phones can get onto WiFi ok, both at work and at home, my Note Will connect ok to the BTFON / BTOpenzone (off of the same routers) with no problems again both at work and at home. We have changed nothing with the routers (BTHome hub 2 and BTBusiness hub at work).
Can you advise what to check with the router as all seems to be in order for all other WiFi devices, it's just my Note that is having a fit and wont connect?
Many Thanks
S
Edit; dr.ketan
Hi, Re mac protection, the routers auto set up and I am unaware how to check re mac protection. I cant understand why has my Note decided to stop connecting out of the blue?
I have similar issues.
I have setup a WIFI hotspot and all my non-Android devices can login without any issues (Notebooks x2, iphone3, iphone4, ipad), however my Note and my Blade (all running 2.3.6) and an Acer A500 Tablet (running Android 3.1) cannot connect.
The android devices see the hotspot and will attempt to get an IP, but most of the time will not succeed.
Any suggestions?
I'm having the same problem with the "stuck at obtaning IP address" problem.
Just got my Note 2 weeks ago and am still not able to connect to the internet using wifi.
I can't connect to my home wifi nor starbucks nor any other public wifi. When i use static address, i was able to connect to my home wifi BUT could not use the internet. I really do not know what to do...PLEASE HELP!!!
I too have experienced this. Running stock 2.3.6 + root. happened with lots of different routers. Usually solved with power cycling router & note wifi. Very annoying.
I think (personally), it has nothing to do with the Note at all, BUT on most samsung smartphones...
I read somewhere that Sammy's phones have a weak side in detecting and connecting to any wifi device...
I personally tested this also with my Note, side by side with my friend's Nokia, a Blackberry and a Galaxy Nexus as well.. both Samsung phones stucked at "Obtaining IP address..." for some time, while the two phones (Nokia and the blackberry) connected thru wifi with ease... no problems at all..
I have same problem periodically at my sister's house, especially when a lot of other mobile devices using the router. If you google the issue there are many with same problem.
Simplest way to solve it for me has been to unplug & then plug the router back in. Rather annoying.
I had same prob with my galaxy tab... Forgetting a network won't help..
Nor there is fault of router...
Google this problem you will find results with solutions for xda only... (did the same but don't remember the link)
Al t bst!!
Sent from my GT-N7000 using Tapatalk
sleegrony said:
Hi,
Laptops x3 and other peoples phones can get onto WiFi ok, both at work and at home, my Note Will connect ok to the BTFON / BTOpenzone (off of the same routers) with no problems again both at work and at home. We have changed nothing with the routers (BTHome hub 2 and BTBusiness hub at work).
Can you advise what to check with the router as all seems to be in order for all other WiFi devices, it's just my Note that is having a fit and wont connect?
Many Thanks
S
Edit; dr.ketan
Hi, Re mac protection, the routers auto set up and I am unaware how to check re mac protection. I cant understand why has my Note decided to stop connecting out of the blue?
Click to expand...
Click to collapse
I am on note2 BT homehub2and having identical issues. Did you get a fix?
I have been having issues where i am connected to the wifi but the device stops passing any traffic. I have fing installed and i can't ping any other devices on my network. I know its just my phone because i have my work phone and tablet connected to the wifi and they still work fine browsing webpages, watching movies etc while the droid turbo can no longer communicate with the local lan or out to the internet. If i switch the wifi off then on again it will reconnect and then work normally. I can then ping devices on the local lan and access pages on the internet. This has happened a number of times now since i got the device.
Edit: I just updated the phone and still get the issue. I have a cisco WAP at home, we have cisco WAP's at work which i will test tomorrow. If this thing still has issues i am just going to swap it out for a Note 4.
Check this out:
http://forum.xda-developers.com/showthread.php?t=2925844
I've been seeing issues with Cisco wlans too.
Sent from my XT1254 using XDA Free mobile app
so it looks like it works good at work, something with my home cisco ap and this phone as all other devices at home work ok.
-magnum- said:
I have been having issues where i am connected to the wifi but the device stops passing any traffic. I have fing installed and i can't ping any other devices on my network. I know its just my phone because i have my work phone and tablet connected to the wifi and they still work fine browsing webpages, watching movies etc while the droid turbo can no longer communicate with the local lan or out to the internet. If i switch the wifi off then on again it will reconnect and then work normally. I can then ping devices on the local lan and access pages on the internet. This has happened a number of times now since i got the device.
Edit: I just updated the phone and still get the issue. I have a cisco WAP at home, we have cisco WAP's at work which i will test tomorrow. If this thing still has issues i am just going to swap it out for a Note 4.
Click to expand...
Click to collapse
Yeah this phone does not seem to like my router for some reason. Keep in mind I'm not a networking expert, but I've tried every combination of options and settings every which way from Sunday and I just can't get the thing to work. When I do connect the phone to my wifi it kills the the connection on every device in the house. At first I though it was just a wireless thing, but even the downstairs computer which is plugged in directly to the router doesn't work. Then as soon as I disconnect the phone every device works again. I thought maybe there was too many devices, so I disconnected all but the downstairs computer, still had the issue when I connected the Turbo. I've tried just turning off the WPA2 and just having an open system, I've tried connecting the phone using a WPS pin (This one actually worked for a good 5 minutes before crapping out and hasn't worked since). On the advanced options of the phone I tried an automatic IP as opposed to the default DHCP setting (This also worked for a good 5 minutes before not working ever again). I've tried limiting it to just one frequency band. I have tried so many different things and I just cannot make this phone work on my router. And I know it's my router because the phone works fine at work.
phone: Droid Turbo
Router : Asus rt-ac66r
yup within ten minutes of getting home, the device no longer passes traffic. My work S5 still works fine at home and so does my samsung tablet. The device worked on wifi all day at work on our enterprise wpa2 network no issues. I tried doing static ip at home, changing to 2.4 ghz, trying new ssid. Not sure what else to do with this thing...
Not just you
I posted a comment on Motorola's forum where people are discussing their wifi issues... And my work around. I currently beleive its a software issue and can be fixed via update. Also, today I found (it appears) that the longer the phone goes without a reboot, the shorter amount of the it appears to go with out needing the wifi card reset.
https://forums.motorola.com/comment/829632
My work around fix...
First, over night my wifes phone now behaves just like mine. It now connects to wifi and after sometime passes it no longer passes data (but stays connected). I needed a way to auto disable/enable the card... I installed Tasker. I have it set to check every 15 minutes, if the phone is connected to WiFi, to disable then enable the WiFi card. I use WifiMatic to enable the wifi card when the phone is connected to the cellular tower that is near my house. (Doing this by GPS uses more battery power...) Using Tasker with the rule to verify its connected to wifi first helps not enabling wifi if its nit needed and lets WifiMatic enable/disable it as needed.
wicketts.net
So I'm in the army right now, which means there's a TV but no WiFi available.
I did think of just setting up a Hotspot with another phone but it gets pretty annoying having to have 2 people at all time.
So I went digging in the Internet and found someone at a random forum (can't find it now for credit..), that said that If you set up the Hotspot in your own phone and configure it with another one you don't need the other one around anymore - being the Hotspot works as being connected to it.
Now I'm pretty sure there shouldn't be any reason I couldn't set it up on my own phone (the hotspot), except the Google home app just demands I connect to the WiFi network, which I can't do because you can't connect to yourself sadly.
I think if someone made some changes to the Google home app, or made an alternative set up app it could work. I have no idea how to code an app, so I came here ?
tl:dr I Want an app that does the same as the home app for setting chromecast up, but without checking if I'm connected to a WiFi network. (I think)
I'm guessing that you have no WiFi but you do have a hard line internet connection?
The only issue with what I'm going to suggest is that base rules may prohibit creating a WiFi access point on any of their hardline connections.
But the best solution for you is to buy a Portable Router (see posts here about using CCast in a Hotel).
It's a small box about the size of a DC transformer that plugs into the outlet and also any Network to create a small footprint WiFi access point.
I suggest looking for a model that also has Repeater mode that allows it to connect to another WiFi access point to create your own private network as opposed to a hard line.
It is probably the best way to use a CCast in places where WiFi is not available without having to play with Phone Hotspot which doesn't always work due to the fact the hotspot can't control the CCast in that mode.
The other Option that is most likely to be allowed is to add a WiFi puck to your Mobile account. Then there would be no potential compromising of the Military network (which is why they might not allow the Portable Router to be used) and you would no longer need two phones to run the CCast.
CCast definitely needs Internet so that Puck might be the safest and best way forward for you.
As for what you read...The issue is that if the Phone goes out of range it stops working.
Asphyx said:
I'm guessing that you have no WiFi but you do have a hard line internet connection?
The only issue with what I'm going to suggest is that base rules may prohibit creating a WiFi access point on any of their hardline connections.
But the best solution for you is to buy a Portable Router (see posts here about using CCast in a Hotel).
It's a small box about the size of a DC transformer that plugs into the outlet and also any Network to create a small footprint WiFi access point.
I suggest looking for a model that also has Repeater mode that allows it to connect to another WiFi access point to create your own private network as opposed to a hard line.
It is probably the best way to use a CCast in places where WiFi is not available without having to play with Phone Hotspot which doesn't always work due to the fact the hotspot can't control the CCast in that mode.
The other Option that is most likely to be allowed is to add a WiFi puck to your Mobile account. Then there would be no potential compromising of the Military network (which is why they might not allow the Portable Router to be used) and you would no longer need two phones to run the CCast.
CCast definitely needs Internet so that Puck might be the safest and best way forward for you.
As for what you read...The issue is that if the Phone goes out of range it stops working.
Click to expand...
Click to collapse
Actually, no Internet at all, just mobile data, but since I got 15 gigs it's OK for me to use it.
exeLz said:
Actually, no Internet at all, just mobile data, but since I got 15 gigs it's OK for me to use it.
Click to expand...
Click to collapse
Then I suggest getting the WiFi puck and adding it to your data account.
Asphyx said:
Then I suggest getting the WiFi puck and adding it to your data account.
Click to expand...
Click to collapse
To be honest, it is a good idea but my I was mainly wondering if I could solve it via software which is both easier obviously and also I just wanted to know if it's actually possible since I thought of it and I wanna know if I got it right
exeLz said:
To be honest, it is a good idea but my I was mainly wondering if I could solve it via software which is both easier obviously and also I just wanted to know if it's actually possible since I thought of it and I wanna know if I got it right
Click to expand...
Click to collapse
Not really...All the hacks and such that people try simply don't work well due to the fact that the Phone can't really connect to the same subnet as the Hotspot. When you go into Hotspot mode you can't also connect to that hotspot internally because WiFi is no longer available to the phone.
Asphyx said:
Not really...All the hacks and such that people try simply don't work well due to the fact that the Phone can't really connect to the same subnet as the Hotspot. When you go into Hotspot mode you can't also connect to that hotspot internally because WiFi is no longer available to the phone.
Click to expand...
Click to collapse
That's why i suggested tempering with the app so it treats being a Hotspot as if u were with WiFi on connected to one.
Basically take off the check for being connected to WiFi.
exeLz said:
That's why i suggested tempering with the app so it treats being a Hotspot as if u were with WiFi on connected to one.
Basically take off the check for being connected to WiFi.
Click to expand...
Click to collapse
The issue isn't the app...It's the fact that the WiFi in your phone can only do one thing at a time....BE an Access Point or CONNECT to an access point.
It can't connect to itself as the radio can't do both things at once.
So when you go into hotspot there is no way to get on the same subnet as the hotspot with the phone.
Because there is no network adapter available to connect to it. It is too busy being an access point.
Basically going into hotspot turns the Phone into a router. A router the phone has no way to connect to. So you either need another device to connect to that phone router or find some other router with internet.
Which is what the Cellular Puck will give you.
Asphyx said:
The issue isn't the app...It's the fact that the WiFi in your phone can only do one thing at a time....BE an Access Point or CONNECT to an access point.
It can't connect to itself as the radio can't do both things at once.
So when you go into hotspot there is no way to get on the same subnet as the hotspot with the phone.
Because there is no network adapter available to connect to it. It is too busy being an access point.
Basically going into hotspot turns the Phone into a router. A router the phone has no way to connect to. So you either need another device to connect to that phone router or find some other router with internet.
Which is what the Cellular Puck will give you.
Click to expand...
Click to collapse
Like I said, once the setup is done, being the Hotspot is just like being connected to is. The app still doesn't recognize you're connected but if you're on the web the chromecast icon does pop up when needed, all the third party apps do recognize you as being connected.
All you managed to do with Google Home (which can't be edited by anyone but Google)on the second phone is connect your CCast to the Phone Hotspot for it's Internet. There is no way to avoid that setup....HOWEVER...
As long as you don't set it up to connect to some other Hotspot there is no need to run Home again, Just turn on Hotspot and it should reconnect.
It will even remember the password,
Accidental post
Asphyx said:
All you managed to do with Google Home (which can't be edited by anyone but Google)on the second phone is connect your CCast to the Phone Hotspot for it's Internet. There is no way to avoid that setup....HOWEVER...
As long as you don't set it up to connect to some other Hotspot there is no need to run Home again, Just turn on Hotspot and it should reconnect.
It will even remember the password,
Click to expand...
Click to collapse
Yea I know, but sometimes friends take it or something and it's a pain in the ass to explain everything, and even when I do it means I gotta reconnect at my end again which is annoying just thought someone could maybe find a solution that sounded really simple for me, guess not, too bad..
Thanks anyway!
Well trying to recode Home is a dead end....Android wouldn't even let you install it!
You guys should just chip in and buy the puck.
It will even let you use Tablets and Laptops as well as simplify the CCast use.
I know this is an older post; not sure if you are still interested. I read all the replies and not sure what to make of it as far as if anyone had a working solution or not. No disrespect to anyone, but I couldn't tell for sure so I'm posting a link to my solution which does work. The two important steps are included. One is using " other wifi" in the drop down list when searching for your hotspot. The second is enabling GUEST MODE.
https://forum.xda-developers.com/android/help/how-to-cast-screen-android-phone-to-t4032653
I’m trying something similar with a Chromecast 3rd gen and iPhone 5S (iOS 12). Main issue seems to be guest mode doesn’t work at all on any apps, and pretty much every solution i’ve seen to this results in guest mode being used for the eventual casting. If you have android or iOS 13 then ymmv.
The only solution i’ve found are workarounds, the obvious being
1) don’t buy a chromecast (it’s not much of a solution but hey it’s $30).
2) use a secondary device to cast.
3) use a tethered travel router, and this can be done with only a phone and mobile data for internet, but there’s a catch:
First i’d Recommend any router by GLi.net (cheapest “mango” router is about $20) as they support iOS and android and both WiFi and usb tethering.
Also, i’ve Tried using a WiFi hotspot on the phone, and it’s the same issue - no connection to the chromecast regardless of how. However... iPhones will allow you to create a hotspot using *only* cables usb tethering, so if you set the router up to *only* accept internet via cables tether (turn off WiFi/repeater tethering), then you can have both the chromecast and iPhone connect to the routers WiFi, whilst providing net access to the router (and WiFi network) from the same iphone’s mobile data via usb. Simple howoto:
Important: Turn OFF WiFi on the phone, and turn off hotspot.
Connect phone to router via usb, accept trust settings.
Turn on personal hotspot, you’ll get a message asking whether to use WiFi or just usb (andbluetooth if it’s also turned on). Select just usb/Bluetooth.
Wait until blue connection bar shows on phone (if not, make sure routers setup properly to gain net via usb tethering).
Now, turn on WiFi on the phone, and connect to routers WiFi.
Setup chromecast as normal, selecting to connect to routers WiFi too.
Note turning hotspot off and on again whilst WiFi is running will start a hotspot on WiFi and disconnect you from router WiFi, so you’ll always have to go through process of turning WiFi off, turn hotspot on, turn WiFi on.
So you can do this with the right router and a usb connection to phone. Or maybe android and working guest mode. Otheriwse, ...fire tv anyone?