I'm currently on Cog 2.2 B7 and have been having some wifi issues. A little reading has me thinking maybe it's the Android ID. I'd like to find out what the original is or how the whole ID thing works in general.
I understand when I bought my phone it had an ID set. Is this actually tied to the phone? As in, if I revert to stock firmware will I have the original ID back? Is there any way to generate that ID without flashing back to stock?
I know how to change it just not sure how to find the original.
Thanks!
EDIT: It appears this is being answered in another thread.
http://forum.xda-developers.com/showthread.php?t=810967
If you flash to stock, the original ID will be back. So far there isn't a way to generate the original with any other rom other than stock.
Someone also told me that if you had an older Nandroid backup file of your 2.1 setup, you could use Notepad++ to view the datadata.img file and find it there buy doing a search for "android_id".
I flashed back to stock and then wrote it down to change via Terminal Emulator. However I also learned that once you make a TiBu of a 2.2 setup, if you had changed your ID number to be the correct one, it will restore it back, so you don't have to keep changing it.
android id has absolutely nothing to do with wifi.
That said, it well be good knowledge for you to know how to do it. Unfortunately, flashing back to a stock rom is the only way to get it, unless you have a nandroid back up from when you were running stock. Somewhere posted in mass of the cog thread someone posted a method for extracting you id right from the back up. If I find that post again I'll post a link to it here.
I was having issues with wifi as well after flashing to cog 2.2 beta 7.
The fix that worked for me was giving my captivate a static IP.
Go into advanced settings in wifi and enter these for static IP.
IP: 192.168.2.4
Gateway: 192.168.2.1
subnet mask: 255.255.255.0
dns 1: 192.168.2.1
dns 2: blank
before doing this I couldn't connect to my home wifi at all. Now it connects just fine.
Demented71 said:
Someone also told me that if you had an older Nandroid backup file of your 2.1 setup, you could use Notepad++ to view the datadata.img file and find it there buy doing a search for "android_id".
Click to expand...
Click to collapse
This worked for me, Hope it is the right ID.
What exactly its the android id used for and is it important that I make sure it's unique on my phone?
Sent from my SAMSUNG-SGH-I897 using XDA App
Demented71 said:
Someone also told me that if you had an older Nandroid backup file of your 2.1 setup, you could use Notepad++ to view the datadata.img file and find it there buy doing a search for "android_id".
Click to expand...
Click to collapse
I had a backup from cwm, so tried this method. However, there are many different values, not sure which ones correct. some are all capital alphabets, some just numbers. Anyone know how to read it correctly?
Try using unyaffs to get it off your old datadata.img:
I outline how here.
Related
So. my IMEI is jacked up. I made a copy of /efs when I got the phone but instead of making an archive I did a straight copy, Seems like the fat filesystem owned the permissions.
I am trying to restore from that backup but I am not having luck. People say you can just drop those files into place but it seems that they are replaced after every reboot. What do the permissions need to be? I see that ownership needs to be 1001:1001. Also, can I do this on JH7 with any success?
If your flashed back to stock OTA JH7? Shouldn't need to have to restore them.
Only need to input that (if Android ID doesn't work) - you should be able to copy it using ADB shell and SU.
cp /dir/foo /dir/newfoo
I used the CWM flashable zip to get back to JH7, didn't use odin (im not at home yet, and this was eating away at me at work, heh).
Ill flash back with odin and then see where that gets me. For my own sanitys sake, could you tell me what the permissions are on your files in /efs?
i have a fix that worked for me posted in the dev section
bames said:
i have a fix that worked for me posted in the dev section
Click to expand...
Click to collapse
Hmm..my product id is correct (...AATT). Maybe my current files are only half borked. Ill try restoring to jf6 with odin and see where I get. Thanks for the reply
z28james said:
Hmm..my product id is correct (...AATT). Maybe my current files are only half borked. Ill try restoring to jf6 with odin and see where I get. Thanks for the reply
Click to expand...
Click to collapse
once in jf6 if your imei isn't corrected then delete everything but the nv_data.bin and .nv_data.bak.md5.
use android terminal emulator to execute following (must have busybox installed)
su
busybox chown 1001:1001 /efs/nv_data.bin
reboot
avgjoegeek said:
If your flashed back to stock OTA JH7? Shouldn't need to have to restore them.
Only need to input that (if Android ID doesn't work) - you should be able to copy it using ADB shell and SU.
cp /dir/foo /dir/newfoo
Click to expand...
Click to collapse
fyi android id is different than the device id. Device ID = IMEI.
I see my problem, the efs directory I have is from my OLD captivate. Arrrg....I have no backup of my current /efs. The random nv_data.bin it creates has the correct product code already.
There must be something in the phone that knows the imei as this is why it was not accepting my dropped in files (the files from my old phone).
Ah well...ill use it till ATT blocks the test IMEI "lose" mine and go get a refurb as I have insurance.
FYI, the stock original firmware does not create those .bak files from what I could see. I bet your files had jacked product IDs but perhaps the part that went with your IMEI was still intact. This would be why my phone wont accept my old phones nv_data.bin?
once your in stock
run the terminal emu commands you should have baks once your system reboots.
I can delete my baks
run the term commands reboot and they will generate again.
if you have both bin.md5 and bak.md5 delete the bin and run terminal commands.
bames said:
once your in stock
run the terminal emu commands you should have baks once your system reboots.
I can delete my baks
run the term commands reboot and they will generate again.
if you have both bin.md5 and bak.md5 delete the bin and run terminal commands.
Click to expand...
Click to collapse
None of those files get generated for me or exist. If I remove everything, a generic nv_data.bin and .imei get created. Thats it. If I copy over the files from my old captivate, I believe they do get created but since the IMEI in that file does not match whatever is being checked in the phone, new files are created anyways.
I suppose nobody as of now knows how to generate the string that is in the nv_data.bin based on an IMEI so it seems that I am out of luck.
Perhaps some shady place in town can help me repair the IMEI or something
I ended up calling Samsung today. I described the problem (damaged IMEI) and they sent me a pre-paid shipping label to send it off to Plano TX to have them take a look (i'm in Austin).
I will let you guys know how this turns out.
My phone is on its way back to me. They ended up swapping the mainboard under warranty.
I suppose if you have a damaged IMEI and can deal with using an old phone for a week, consider sending it over to samsung.
did you have to pay for new mainboard? cause i got the same problem but i am not the orginal owner for the phone.
Jeez, that's wild. What is the correct way to go about backing up the necessary information while the phone is still stock? Planning on rooting (but not unlocking) my gf's Captivate and want to make sure I leave a proper trail of breadcrumbs.
Phateless said:
Jeez, that's wild. What is the correct way to go about backing up the necessary information while the phone is still stock? Planning on rooting (but not unlocking) my gf's Captivate and want to make sure I leave a proper trail of breadcrumbs.
Click to expand...
Click to collapse
It was no cost. They could see based on the IMEI that it was still in warranty. My mistake is I forgot to make a backup of /efs. If you make a backup before doing the OTA update, the unlock code in in clear text
z28james said:
It was no cost. They could see based on the IMEI that it was still in warranty. My mistake is I forgot to make a backup of /efs. If you make a backup before doing the OTA update, the unlock code in in clear text
Click to expand...
Click to collapse
So just back up that efs folder and that's it? Anything else?
This phone was purchased used on Craigslist so I don't there's any warranty remaining. It's a 1007 so it's older...
Phateless said:
So just back up that efs folder and that's it? Anything else?
This phone was purchased used on Craigslist so I don't there's any warranty remaining. It's a 1007 so it's older...
Click to expand...
Click to collapse
Well, the warranty period is a year and so since its been less than a year since the captivates release, you should be good. It would seem the only way it would be out of warranty would be if samsung for some reason deemed it to be at some point. Im sure you could call samsung with the IMEI and verify.
In my case, my product ID had become damaged. My problem is although I had a backup of /efs, it was for my first captivate, not my current. I deleted /efs and moved the backup into place. Seeing that it was the nv_data.bin for some other phone with another IMEI (the IMEI is encrypted inside that file) it instead replaced the files with a generic set of files and the dreaded test IMEI.
Since nobody had a good way to write the IMEI to that file as it expects, I was SOL.
If I could do it again, I would make a .99 cent jig (I did this using a wonderful thread here labeled something like "make a jig without cutting up USB cable) which gets you into download mode if odin or something soft bricks your phone, root, make a backup of /efs and then take a nandroid backup. I THINK I remember reading that sgstools can backup /efs for you but in the sticky there is a method on how to make a .tar of /efs (good as this will retain permissions/ownership as if you straight copy them to the sd card with fat32, the filesystem does not understand linux permissions and blows them away).
Master-Clear did the trick 4 me
OP I had the same exact same problem here. I spent many hours looking for a fix, N/G, nothing I tried would work. Didn't want to go to AT&T so I took a big chance and went into the efs folder and started deleting files one at a time. When I was through the efs was empty, did this with Root Explorer. When I did a reboot I wound up with a different IMEI, had NO data connection, NO APN, but wifi worked fine. I then did a factory reset from CW which did nothing, still no data connection. More time down so I loaded up ODIN3 One-Click and did a Master Clear. This was the last thing I was going to try before a trip to your friendly AT&T store. Well low and behold after the Master Clear and a reboot everything is back to normal! My IMEI is correct, APN is back, 3G working, wifi working. TITS! What a rush!
TommyZee said:
OP I had the same exact same problem here. I spent many hours looking for a fix, N/G, nothing I tried would work. Didn't want to go to AT&T so I took a big chance and went into the efs folder and started deleting files one at a time. When I was through the efs was empty, did this with Root Explorer. When I did a reboot I wound up with a different IMEI, had NO data connection, NO APN, but wifi worked fine. I then did a factory reset from CW which did nothing, still no data connection. More time down so I loaded up ODIN3 One-Click and did a Master Clear. This was the last thing I was going to try before a trip to your friendly AT&T store. Well low and behold after the Master Clear and a reboot everything is back to normal! My IMEI is correct, APN is back, 3G working, wifi working. TITS! What a rush!
Click to expand...
Click to collapse
Do you know where I can find this ODIN3 one-click and how to do a master clear?
I created a custom Rom, a really great mash up for people that like certain things from eugenes R2 final and Nero using KA6 while also implementing a very nice stock look (stock gingerbread messaging, dialer, contacts)... calling it Frankenstein. I of course will give credit and am not taking any credit away from these real great devs... this is just a mash-up.
This is where I need my [Help] while doing this, testing on my vibrant etc. I have managed to mess up my market.... my phone started off by not being able to connect (data) at all, and only having basic phone ability (mms, callling out).. I have fixed that, but no matter if I odin back to stock, do the eugene froyo odin/reformat back to jfd.. the market will not update. No apps really whatsoever... I get more apps when going to a rom like Nero V5 vs. stock JFD.. so this tells me that I am getting the market the way it was when they were implemented into the roms? but even with nero v5 im still missing a great deal such as titanium backup, file managers... even little things like doodle jump....
anyone that can provide detail that leads to a fix i will happily donate $15 via paypal, no big deal.
files must be missing, would love help.
Edit: have tried clearing data, resigning in.. all the little things... and as i said i have flashed back to jfd... now im on jfd with apps such as firefox test.. and a bunch of apps that were most likley the first apps ever put on market.. this puzzles me.
Thanks, Brandon
the only featured app right now is auto focus snake.. which looks like a android test app...
http://www.google.com/support/forum/p/Android+Market/thread?tid=55c997eccabf0a6a&hl=en&start=40
seems to be an issue with SGS devices and the market? WTF
Attached is a copy of the vending.apk I've been using in my kangs, and haven't had a problem with it. It shows all apps, on my phone its updated by now, but if it isn't when you push it, it should update properly given a little bit and a reboot. I would say if this doesn't fix your issue, it may be something else in your build. Just push the file to the system/app folder in your build, reboot and test it. Or, copy and replace the vending.apk in your working files, recompile and flash your rom, and test it. Good Luck.
so, select section you want, select free or latest or whatever, and you will see them.... or just search for the app you want
IMEI issue
I had the same issue all test apps in market and really no access.
I had to restore my backup and relock the phone.
Now all is working.
It is because certain apps don't recognize the Vibrant's build number. (T959KA6 is an example of a build number)
Sent from my SGH-T959 using XDA App
No I flashed back to stock tried Nero 5. Nothing helped had to restore nvdata. Imei was something like 004 phone was unlocked and tested on ATT. Look when you go into the market and it popup saying phone kay not support the market. Tried multiple google accounts its linked to your google account and your imei for supported apps on your type of phone.
Sent from my SGH-T959 using XDA App
saintjmf said:
No I flashed back to stock tried Nero 5. Nothing helped had to restore nvdata. Imei was something like 004 phone was unlocked and tested on ATT. Look when you go into the market and it popup saying phone kay not support the market. Tried multiple google accounts its linked to your google account and your imei for supported apps on your type of phone.
Sent from my SGH-T959 using XDA App[/QUOTE
there we go, my imei starts with 004 too, and is not my original imei.. what is the easiest way to restore my files? if you could give step by step that would be great! thanks mate.
Click to expand...
Click to collapse
You have to have a backup copy of your original.
If you do delete the files that start with nv -- in the /efs directory.
You probably can see your original IMEI if you open the file that is hidden in the directory /efs it is .imei -- That held the correct number for my IMEI. not sure if someone knows how to use that if you dont have an original backup of nvdata.bin.
I took nvdata.bin and put it in the /efs directory.
removed all files that start with nv in /efs example nv2data.bak
rebooted phone it built md5 from nvdata.bin.
factory reset and all apps back.
I also coudlnt get my pro license of titanuim backup to register with google checkout until this was completed.
saintjmf said:
You have to have a backup copy of your original.
If you do delete the files that start with nv -- in the /efs directory.
You probably can see your original IMEI if you open the file that is hidden in the directory /efs it is .imei -- That held the correct number for my IMEI. not sure if someone knows how to use that if you dont have an original backup of nvdata.bin.
I took nvdata.bin and put it in the /efs directory.
removed all files that start with nv in /efs example nv2data.bak
rebooted phone it built md5 from nvdata.bin.
factory reset and all apps back.
I also coudlnt get my pro license of titanuim backup to register with google checkout until this was completed.
Click to expand...
Click to collapse
i do have a back up of my efs folder thank god. what program did you use to access your efs folder is what im saying? not sure if i have access to adb commands on this machine that i am using, any other way?
and remember i cant use market, so if someone can maybe provide a program to navigate my phone files from my pc, i can just put back in the nv data
I used root explorer
Sent from my SGH-T959 using XDA App
Can I flash this with clockwork mod? And does the voodoo kernel and sounds work with this?
I created another thread about this as I believe there maybe alot more users with this issue
Sent from my SGH-T959 using XDA App
whit this program you use to access your efs folder
http://www.mediafire.com/?c8x8wvpc9vhcd5x
shon yakobi said:
whit this program you use to access your efs folder
http://www.mediafire.com/?c8x8wvpc9vhcd5x
Click to expand...
Click to collapse
said this version is expired, need to update manually?
saintjmf said:
I used root explorer
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
do you know if there is a rom out there that has this preinstalled? remember i cant get apps because of that market.
The problem [might] be inside the build.prop.
Try changing:
Code:
ro.build.fingerprint=Samsung/SGH-T959/SGH-T959/SGH-T959:2.2/FROYO/UVKA6:user/release-keys
to
Code:
ro.build.fingerprint=Samsung/SGH-T959/SGH-T959/SGH-T959:2.1-update1/ECLAIR/UVJFD:user/release-keys
total commander
whit this program you use to access your efs folder its ok no problom
http://forum.xda-developers.com/attachment.php?attachmentid=494485&stc=1&d=1295487965
IMEI
You're IMEI can easily be found by just taking out your battery and looking under it at the sticker with all the numbers and bar codes. It may just show IME and have either dashes or periods (you can ignore the punctuation). That is your original IMEI (this is nothing more than your serial number, make sure you know what it is because if you ever have a hardware issue and want to still utilize your warranty then they check by this number, and of course unroot the phone first so it won't be considered out of warranty)
Before my first flash, I installed Android ID and did a Save ID. I never located the backup file (to copy off to my PC), I did write down the Android ID value displayed in this app.
I have since did my one and only flash... to FF 1.5.
I just now went back into Android ID app and it reports a different ID than the one I had before.
I am not aware of any problems due to this.
What should I do? It looks like I could manually enter my original Android ID value in this app, and hit Change ID. Should I do this?
thanks!
sboltman said:
Before my first flash, I installed Android ID and did a Save ID. I never located the backup file (to copy off to my PC), I did write down the Android ID value displayed in this app.
I have since did my one and only flash... to FF 1.5.
I just now went back into Android ID app and it reports a different ID than the one I had before.
I am not aware of any problems due to this.
What should I do? It looks like I could manually enter my original Android ID value in this app, and hit Change ID. Should I do this?
thanks!
Click to expand...
Click to collapse
This belongs in Q&A but...yes you can do this. I do it everytime I flash. Some roms generate random id's when you boot up, others use the same across devices. You can change it to your stock ID using the app you mentioned.
If you have a ROM with the correct script (I know mine has it, and DG uses it) there's an update.id file on your SD card that will randomly generate a number the first time it boots up.
You should be able to change that in a text editor or whatever and put the one you want in.
Also. WRONG FORUM ZOMG
...[from elsewhere] ...I didn't see any mention of this in the how-to threads so I didn't back up my EFS files from the stock rom. Anyone here have had any issues with this after going back to stock?
Click to expand...
Click to collapse
That is an example of things that are scattered in many threads...specifically, what are the things you should DO or SAVE before flashing a new ROM?
Above seems to be one (except is "EFS" a folder or what?). Would folks please offer your suggestions of the "protective" steps to be done/preserved in case of future difficulties.
Actually, in addition to the one quoted, doing a Titanium Backup is in almost all of the how-to discussions, so I guess that is already covered.
efs is really only relevant if you plan on using kies. Your phones product code and imei number are stoped in those files. flashing roms can alter these files. I have never done this. If you want to down load root explorer, or free option android mate. I would pay for root explorer. Find the efs file copy and paste it to your internal sd. Then save it to your pc
Android id. Dl android id changer from market. if you have not already dl busy box from market. Install busy box using app. Open android id changer, click save id, custom flashes change this and it us god to have it saved, you can restore using same app after flash
Do you know what odin is?
Do you know your build number?
mcord11758 said:
efs is really only relevant if you plan on using kies. Your phones product code and imei number are stoped in those files. flashing roms can alter these files. I have never done this. If you want to down load root explorer, or free option android mate. I would pay for root explorer. Find the efs file copy and paste it to your internal sd. Then save it to your pc
Android id. Dl android id changer from market. if you have not already dl busy box from market. Install busy box using app. Open android id changer, click save id, custom flashes change this and it us god to have it saved, you can restore using same app after flash
Do you know what odin is?
Do you know your build number?
Click to expand...
Click to collapse
Recapping this...
EFS is a file. Can save it using Root Explorer or Android Mate.
I have copied down all the data under the battery. Is there more than that in this file?
I am confused about second paragraph. You mention download
Android ID Changer
Busy Box
Which one is it that captures the Android ID? And obviously it saves it, but where?
Yes, odin is mentioned in the how-to's, but it IS part of the flashing process. I am looking for things that should be done BEFORE starting that.
Yes, I know the build (1006). It is part of the data under the battery. And flashing wouldn't destroy or modify that.
Yes the efs had your csc or product code. If you flash a rom that is a port from another device this may be changed. Not an issue if you do not use kies.
Busybox is an app that installs commands onto your phone that certain programs need to operate correctly. Titanium backup and android id changer need this to function correctly. Android id changer saves your id in a file on your internal sd. The file is called update.id when you flash a rom you open the app again click load id, then change id. Phone reboots, id us back to your original id
Odin is a utility that flashes you back to stock 2.1. It is used by many as a safe way to go from rom to rom with a clean install. It is also used to recover from software bricks.
If you have more questions that pop up pm me, this way we are not clogging up the q&a
I think the exchange helps many people who I assume, like me, are trying to sort all this out.
MAIN purpose of the thread is to identify things to do/save before beginning the 'change to another ROM' process--which to me would include the Odin flash back to stock if you aren't there already.
But these side question resolutions are pertinent.
Your Busybox comment threw me a curve. It sounds like you are saying it installs stuff TiBU and Android ID Changer need in order to work. You mean TiBU as downloaded from the market does not work as a standalone app?
tibu needs busy box. If you download tibu and open the app there is a button on the bottom that says problems. If you click it it will also look to install busy box commands.
You are right about the usefulness of threads like this, no disrespect but it looks like you joined xda 4 days ago. These types of discussions are constant and rehashed on nearly a daily basis. For some odd mental quirk I read then all and help when I can. There are a thousand questions you can have, the offer to pm was to keep it easy
I have been reading for two weeks--I mean reading A LOT, not just 4 days ago; that was when I registered on the site. This is a =wonderful= resource, but it is a plain fact that what you need to know is scattered all over the place, both video and written how-to's. I have not found a single one that includes everything you need to know. I mean, for example, they will tell you to do something, which seems trivial to them, but which really involves other knowledge. And that sounds like a non-isue, but in fact it is a complete showstopper for "us" types. Yes, you can go off hunting to clarify the incompleteness, but that is exactly what I am talking about--hunting all over the place.
By the time someone gets to the point they can create something with completeness, the problem is...they are already to the point they can create such a thing. That contradiction arises from it being almost impossible to remember what you didn't know "back then."
I had been studying HARD trying to get "it," everything you need to do to flash a different ROM. Then, a day or so ago, in all that hunting around I speak of, someone mentioned "be sure you ... before you flash." It dawned on me that, when you think you are ready to flash, you aren't. There are things that should be done BEFORE. I started the "hunt" again as alluded to here. Then I said, dang, all us newbies would be well served if all the preliminary do's and save's were in one thread (preferably, ultimately in one LIST). Thus the reason for this thread.
If I am wrong, and other newbies really don't need to know these things, then yes, it can be done in PM. Others will never see it, and still be stuck in the hunting-all-over mode. Thus, I think it is desirable and helpful to others to put it in public, in one thread.
Once again no disrespect. Your point is taken.
Tibu to back up all your user apps, no system information. unless you want to learn how to use odin in the case of issues
Android id changer to back up your android id
Rom manager to back up your current setup, and flasg clockwork recovery. Never restore a backup of one rom on top of another rom
Contacts to external sd, sim, or sync with google
Efs using root explorer to copy folder and save in pc
Odin to flash stock and or recover from software brick. Builds 1010 and above do not use one click odin
No offense taken, and that's a great input. Thanks.
If others see anything else, please contribute.
Ok, I am also new at this, I have flashed 3 Roms. This is what I have done when changing ROMs.
Download Titanium Backup and rom manager. Back up your apps with Titanium Backup.
Download the ROM you want to flash.
Download Odin.
Turn on usb debugging.
Plug phone into the computer, pull down the notification window and click on usb to mount the sd card.
Open this up to look at files.
You should have an update.zip file you can copy to your desktop. You also should have a folder named Titanium Backup that you can save as well.
Once you have this, you can begin.
Take your phone to stock using odin. There are several tutorials available. I used this one,http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36 because I have a 1010 phone.
Once this is done, I push the voume up and down along with the power button. You will get a menu giving you a choice to reinstall packages. You need to click this, go to yes, and it will pull up to the same menu again. Hit reinstall packages again which will get you to clockwork recovery.
Now, I chose to wipe/factory reset to make sure my phone was "clean".
Then, I chose to apply the update.zip.
Then, I chose to install a zip file from the sd card, scrolled down to the rom file, and chose it.
Then it will install the Rom. You will choose go back, then reboot the system. Then your Rom should be installed.
I think I remembered everything. I used a few tutorials:
http://theunlockr.com/2010/08/02/how-to-load-a-custom-rom-on-the-samsung-captivate-vibrant/
and this one:http://forum.xda-developers.com/showpost.php?p=10183875&postcount=4
Hope this helps!
OOPS. Thanks, but this thread is for things to do or save BEFORE starting the ROM change.
So... let's say that you didn't save your android id before you flashed... will that cause problems?
beryxil said:
So... let's say that you didn't save your android id before you flashed... will that cause problems?
Click to expand...
Click to collapse
You tell me. Did you? Are you experiencing problems?
it depends on the rom you are using. You may experience issues downloading from market and certain games may give you issues.
If you did not save it and you are not having problems then no big deal. You can go back to stock and save it, then flash again.
I think everybody who restored back to stock wifi rom have same service tag! Check Yours!
http://forum.xda-developers.com/showpost.php?p=17428052&postcount=197
you can change it in build.prop in system
rickwyatt said:
you can change it in build.prop in system
Click to expand...
Click to collapse
That is assuming you know the right number to begin with. If you bought from Dell their site will have the tag number, I think.
my tag number is under the flap were you put the similar ad sdcard
rickwyatt said:
you can change it in build.prop in system
Click to expand...
Click to collapse
What i need to change?
you can't change it in build.prop I look all over the streak but couldn't find were the service tag is stored so the only why is to find someone whit the same rom and tag and flash it I need a English uk if any one can help
Possible Non-Issue
konikg said:
I think everybody who restored back to stock wifi rom have same service tag! Check Yours!
http://forum.xda-developers.com/showpost.php?p=17428052&postcount=197
Click to expand...
Click to collapse
stevedebi said:
That is assuming you know the right number to begin with. If you bought from Dell their site will have the tag number, I think.
Click to expand...
Click to collapse
I've never had an issue with restoring back to stock WiFi ROM. I recommend that you compare your Service Tag under the About in Settings and then comparing it to your Service Tag number printed on the inside of the flap where you can access the port to the SD Card. If it matches then this is a non-issue. Did you compare the two? This is a first that I've heard of with this issue. I just put stock back on my Streak to prepare for Dell's OTA update to Honeycomb and I had no issues.
could some with a u.k wifi version get the glunb number youll find it in build.prop in system/
thanks
Berryblue said:
I've never had an issue with restoring back to stock WiFi ROM. I recommend that you compare your Service Tag under the About in Settings and then comparing it to your Service Tag number printed on the inside of the flap where you can access the port to the SD Card. If it matches then this is a non-issue. Did you compare the two? This is a first that I've heard of with this issue. I just put stock back on my Streak to prepare for Dell's OTA update to Honeycomb and I had no issues.
Click to expand...
Click to collapse
Can You post link to "REAL" Stock ROM, Because My Service Tag is different. Thanks!
I fixed my service tag I found it in 23.img I opened it with hex editor read my service tag from the flap and copyed it to the file then saved it then flashed it with nvflash hope this helps someone
konikg said:
Can You post link to "REAL" Stock ROM, Because My Service Tag is different. Thanks!
Click to expand...
Click to collapse
You can find the "Stock ROM" here in the forums, simply do a search. Or you can try what rickwyatt posted to fix your service tag.
I too have the same issue with the Service Tag changing. It is because I followed the instructions from here http://forum.xda-developers.com/showthread.php?p=14303822#post14303822 using solidsnakes files. I think it must be because p23.img is included which has the tag in it.
To resolve this, how do I edit & flash just the p23.img. I tried it but it killed my streak, am reflashing now.
I did it with a hex editor then reflashed the hole rom
That worked, now I just need to figure out how to change the GLUNB as it doesn't appear to be one of the c"standard" ones as mentioned elsewhere on this site. It is GLUNB1A133830
No need to change
STINGWRAY said:
That worked, now I just need to figure out how to change the GLUNB as it doesn't appear to be one of the c"standard" ones as mentioned elsewhere on this site. It is GLUNB1A133830
Click to expand...
Click to collapse
You don't need to do that. I just updated my Wifi version without changes. Go to the below link which is my post on what you need to do. It's really simple to upgrade.
http://forum.xda-developers.com/showpost.php?p=18171297&postcount=2
Editing p23.img for Service Tag AND PPID
This worked for me on the US WIFI model. For those of you needing to edit p23.img to change the service tag, if you look a little further up in the prior entries before the service tag you will find the PPID number which can also be found on the inside of the cover for the SD card. This is like the device serial number or something along those lines. Anyway, I edited both the Service Tag number and the PPID to my own from the SD card lid and was able to connect to Netflix and stream without issues even though I could not find the mac address to edit it. I hope this helps those of you that cant stream Netflix after the nvflash of Froyo 2.2.2 with the files posted here http://forum.xda-developers.com/showthread.php?t=1252840 Maybe what Netflix sees as duplicates is not the mac address but the PPID.