Database Develop

[Q] Bell Vibrant, black screen, no recovery

I've read several topics but i couldn't find the right answer. I hope you can help me.
The problem i have happened without me doing anything recent. I have never flashed any rom, and i rooted my phone for titanium backup like 2 month ago and it worked fine.The last things i did was to install pocket legend, the new mmorpg like 3 days ago.I charge my phone during night, and take it for the day in the morning. Today, the screen stayed black when i picked it up. When i reboot, the screen goes black after the samsung logo.
The problem is that i have recovery mode (the 3 buttons) disabled and when i try to connect to kies it says i am not in samsungs kies mode.. Is there a way to force it to detect my phone so i can try update it?
According to the wiki, my phone doesnt seem to be bricked as i can still see the battery charging when i plug it. Is my phone bricked? Any hope?
I know the easiest way would be to return it to the store, but i dont want them to see my personal information/rooting as i cant even factory reset it.
There is also that topic on internal sd that has failed but i think this is not my case. You can still boot into android without the internal sd right?
I've seen a topic on soldering two mini usb cable to force the phone to go into recovery mode. I not familar enough to do it. If this method could solve my problem, could anyone sell me one?
Was there an over the air update today that could've done this to my phone?
I am lost, please help i am really clueless in what is happening to me.

are you able to go to download mode
flash your phone that way with odin i had the same problem as you

download mode as in using the 3 buttons? no i cant unless there is another way?

I can't get odin to recognize my phone.. I can't get into os so no usb debugging...

read this
http://forum.xda-developers.com/showthread.php?t=819551
then it'll help you flash back to whatever you want

Okay, I know the jig will DEFINITELY work in this case. Any phone state I've come across with that jig, I can throw the phone into downloading. However, it seems that there MAY be hope for you PRIOR to using the jig. Are you familiar with the ADB commands? If so, turn on the phone, connect via USB, run cmd as administrator, navigate to the proper adb folder and under the prompt type in adb devices. If it shows any device, type in adb reboot download and it'll throw it into download mode for you.

AllGamer said:
read this
http://forum.xda-developers.com/showthread.php?t=819551
then it'll help you flash back to whatever you want
Click to expand...
Click to collapse
I think the JIG is my last resort but i dont have any solder skill
If you know anyone that could sell me one i would be very happy!
krazykidd said:
Okay, I know the jig will DEFINITELY work in this case. Any phone state I've come across with that jig, I can throw the phone into downloading. However, it seems that there MAY be hope for you PRIOR to using the jig. Are you familiar with the ADB commands? If so, turn on the phone, connect via USB, run cmd as administrator, navigate to the proper adb folder and under the prompt type in adb devices. If it shows any device, type in adb reboot download and it'll throw it into download mode for you.
Click to expand...
Click to collapse
Good to hear that the JIG would work. As for ADB commands, doesn't it need the usb to be put in debugger mode? Is there any way to do it externally, without going in the setting menu? I am not very familiar with the adb commands but if its doable i will go read about it.
Thanks for suggestions!

slay3r85 said:
As for ADB commands, doesn't it need the usb to be put in debugger mode? Is there any way to do it externally, without going in the setting menu? I am not very familiar with the adb commands but if its doable i will go read about it.
Click to expand...
Click to collapse
exactly... it's not possible via ADB in your conditions

Thanks you for help!
I still tried but it said that it couldn't find my phone.
I leaning toward making a JIG. I just have to figures out how if no one sell them

Did you really tryed Download Mode?
"Vol Down" + "Home" + "Power" instead of "Vol Up" + "Home" + "Power"?

I tried several time different combo listed on wiki without any success. About 3h long!
I bought my phone the first day it came out so i guess the hardware method is locked.
As soon as i can get it back running i will apply that new fix for the combo.
I am a bit worried about the homemade JIG, will it still work without usb debugging?

Where in the world are you?
If you are in the GTA area, then you can invite me for a coffe

slay3r85 said:
I tried several time different combo listed on wiki without any success. About 3h long!
I bought my phone the first day it came out so i guess the hardware method is locked.
As soon as i can get it back running i will apply that new fix for the combo.
I am a bit worried about the homemade JIG, will it still work without usb debugging?
Click to expand...
Click to collapse
Yes. It will. As long as the phones off and the jig is in when you turn it on
Sent from my SGH-T959 using XDA

AllGamer said:
Where in the world are you?
If you are in the GTA area, then you can invite me for a coffe
Click to expand...
Click to collapse
I wish i could but i live too far Quebec / Laurentides. I think its about 8h driving!
krazykidd said:
Yes. It will. As long as the phones off and the jig is in when you turn it on
Sent from my SGH-T959 using XDA
Click to expand...
Click to collapse
Thanks you for confirming this! I ordered the components and i will try to do it myself.
Some people have done it without any solder skill ! I hope it get here fast! I didn't know i would miss my phone so much!

Seriously! ??? I just soft bricked my phone I really don't know why these software and hardware companies can't get this right the first time. I was going to by an iphone until a sales rep showed me the galaxy s and I was impressed until I saw the black screen of death. A whole lot of B.S. to fix something that should work right in the first place. I'm getting tired of faulty equipment.
My Galaxy is still under warrenty I'll bring it back to store but I'm fed up with worthless technology.

black screen help plz
hey guys i have a galaxy s vibrant which will turn on nd the home nd back nd other buttes will turn on but my screen wont any idea what it might be ?

[Q] Bricked...

Hey,
so basically, i bricked my phone, and im currently at the phone ---!--- computer screen.
Ive googled and readup on XDA and found that you can fix this by entering download mode and opening up ODIN. Thing is, i cant enter download mode unless i use the ADB command (which requires me to be connected to the pc)...
Does that mean the only way I can unbrick it is by buying the bits from radio shack and fixing it?
P.S. I just purchased this phone, about 3 days ago from best buy mobile, so i still do have 10 days to return/exchange it and such. Should i go about exchanging it? If so, what do i tell them about it :S.
Edit : I also have installed the zagg invisishield, so will best buy allow me to return it? or should i not return it because the shield costs 30 bucks and just pay the dollar for the usb fix :S
Thanks!

Pay for the jig and after that there's an Odin one click jf6 by C30PLOL that *should* fix your three button recovery.
Edit: authors name fixed.
Sent from my Captivate

supaphreek said:
Hey,
so basically, i bricked my phone, and im currently at the phone ---!--- computer screen.
Ive googled and readup on XDA and found that you can fix this by entering download mode and opening up ODIN. Thing is, i cant enter download mode unless i use the ADB command (which requires me to be connected to the pc)...
Does that mean the only way I can unbrick it is by buying the bits from radio shack and fixing it?
P.S. I just purchased this phone, about 3 days ago from best buy mobile, so i still do have 10 days to return/exchange it and such. Should i go about exchanging it? If so, what do i tell them about it :S.
Edit : I also have installed the zagg invisishield, so will best buy allow me to return it? or should i not return it because the shield costs 30 bucks and just pay the dollar for the usb fix :S
Thanks!
Click to expand...
Click to collapse
you have definitely tried the method: power off, hold both vol keys and insert usb into phone and then wait for download mode to occur?
the jig is definitely worth it. if you return it to best buy they might give you a new phone, or they might determine that you voided the warranty and are trying to commit fraud. lol the jig will fix your probs if all else fails

Jig man jig
http://forum.xda-developers.com/showthread.php?p=9589739#post9589739
or make your own.
But dude, please read read read what you are doing. You have two posts already about being bricked and can't get into download mode. And you have only 3 post.
Sounds to me your rushing things a bit.

Lol, yeah, i am reading up on it :S. I follow the guides exactly but it doesnt always seem to work.
And my first thread wasnt about it bricking, it was about me not getting into download mode :S

Thing is, i cant enter download mode unless i use the ADB command (which requires me to be connected to the pc)...
Click to expand...
Click to collapse
no.. you can use ADB to get into DOWNLOAD mode and Odin will see it just fine...
Open Odin -> run ADB reboot download -> Odin sees the phone - flash back to stock as normal.
I have a 1008 phone - how do you think I have to flash back to stock almost everytime?

Sorry for the confusion avgjoegeek,
What im saying is, i cant run the adb commands unless it is connected to my computer.
At the phone---!--computer screen, it wont connect to my computer, so i cant use the adb command to get into download mode :S. The volume keys dont work either.
Although im buying the jig in about half an hour, so il let you guys know how it works out then! Thanks for your help

supaphreek said:
Sorry for the confusion avgjoegeek,
What im saying is, i cant run the adb commands unless it is connected to my computer.
At the phone---!--computer screen, it wont connect to my computer, so i cant use the adb command to get into download mode :S. The volume keys dont work either.
Although im buying the jig in about half an hour, so il let you guys know how it works out then! Thanks for your help
Click to expand...
Click to collapse
Good luck brotha, let us know how it goes.

Tried the usual?
Pull the battery, SIM, External SDCard
Turn on Odin
Plug the USB Cable into your phone.
While holding the VOLUME +/- Button pop the battery back in.
Should put you directly into DOWNLOAD mode and you can flash back to stock.
Really really wish people would read the Q&A sticky

I managed to get my phone out of the exact same situation by getting it in to download mode with the holding vol buttons and plugging in USB. No other method would work. I would suggest trying that one again just to make sure.

Thanks for your suggestions once again Avgjoegeek and Bufgaric,
but that method simply does not work :S.
Ive got the materials for the jig now and im currently working on building it
Edit : alright, so ive created the jig... took out the battery, put it back in, didnt power it on. Put in the jig and it goes to the phone -- ! -- computer screen. Would that happen if both ends of the resistors were touching? :S
edit : apparently it does fixed and running
thanks for all your help and another very big thanks to the man who created the guide!

[Q] Seems to be bricked..

Hey everyone, First time poster here and it seems my captivate is bricked. I'm fairly new to android but I caught on with ROM/kernel/etc.. flashing and all seemed to be going well. I saw the new 3.5 update for precision and wanted to update from 3.0. I did my usual thing and restored to stock with ODIN instead of flashing over. Rooted all over again, downloaded ROM manager and flashed clockwork recovery. I selected the ROM when I was in CWrecovery and rebooted.. but for some reason the phone never gets past the boot screen. The ATT logo shows up, then the suckerpunch logo (as suckerpunch is included in the precision ROM) and then the precision logo.. but it just keeps starting over from there. I thought I did a clean flash but something went wrong obviously.
Ive tried the three button combo and anything that has been stated before on here about the three button combo timing and whatever. So it seems that I cant get in recovery or download by using the traditional methods.
I'm guessing my phone is soft-bricked, which should be relatively easy to fix, but I can't get into any mode at all. Ive seen plenty of threads with people having boot loop issues but they seem to have been solved my some combination of buttons used or the ODIN usb download mode technique. Ive seen mention of using adb commands to get into download mode, but I think I have to have usb debugging enabled which I can't enable, clearly.
Any help would be appreciated, especially since in the meantime I'll have to use my old 903sh.

CCDillon said:
Hey everyone, First time poster here and it seems my captivate is bricked. I'm fairly new to android but I caught on with ROM/kernel/etc.. flashing and all seemed to be going well. I saw the new 3.5 update for precision and wanted to update from 3.0. I did my usual thing and restored to stock with ODIN instead of flashing over. Rooted all over again, downloaded ROM manager and flashed clockwork recovery. I selected the ROM when I was in CWrecovery and rebooted.. but for some reason the phone never gets past the boot screen. The ATT logo shows up, then the suckerpunch logo (as suckerpunch is included in the precision ROM) and then the precision logo.. but it just keeps starting over from there. I thought I did a clean flash but something went wrong obviously.
Ive tried the three button combo and anything that has been stated before on here about the three button combo timing and whatever. So it seems that I cant get in recovery or download by using the traditional methods.
I'm guessing my phone is soft-bricked, which should be relatively easy to fix, but I can't get into any mode at all. Ive seen plenty of threads with people having boot loop issues but they seem to have been solved my some combination of buttons used or the ODIN usb download mode technique. Ive seen mention of using adb commands to get into download mode, but I think I have to have usb debugging enabled which I can't enable, clearly.
Any help would be appreciated, especially since in the meantime I'll have to use my old 903sh.
Click to expand...
Click to collapse
Can you describe exactly which three button methods have you performed? The one that always seems to work to get to download mode is hold both volume up and down and plug in USB cable to the computer and you should be able to get into download mode (of course after taking out the battery, shutting off your phone first). You should have ODIN open before this, then after that just press start on ODIN.
I believe people with captivates who have problems with 3 button combos have batch 1008. Please tell if you can't use the method above then we can check your batch.

koreancanuck said:
Can you describe exactly which three button methods have you performed? The one that always seems to work to get to download mode is hold both volume up and down and plug in USB cable to the computer and you should be able to get into download mode (of course after taking out the battery, shutting off your phone first). You should have ODIN open before this, then after that just press start on ODIN.
I believe people with captivates who have problems with 3 button combos have batch 1008. Please tell if you can't use the method above then we can check your batch.
Click to expand...
Click to collapse
I appreciate the fast response.
Ive tried the above method and it didn't work. Ive also tried plenty of others like holding the power button with the two volume buttons (to try recovery) Ive also held the buttons down for certain amounts of time to see if my timing is just off, and pretty much a few other generic three button combos that are performed when this sort of thing happens. Instead of getting into download mode, it of course just shows the battery charging.
If the phone is plugged in while it is doing its rebooting cycle then ODIN actually detects it, but I still wouldn't be able to do anything I'm sure.
Ive read through many posts about this but I just cant find anything to work at all, maybe buying a jig would be the final solution. :/
EDIT: If it helps, before flashing my captivate for the very first time a month back, i was told to check to see if I could enter into download mode and recovery safely, which I could and this was on stock rom. Ive been able to get into download/recovery with other ROMs as well, idk what's up now though

CCDillon said:
I appreciate the fast response.
Ive tried the above method and it didn't work. Ive also tried plenty of others like holding the power button with the two volume buttons (to try recovery) Ive also held the buttons down for certain amounts of time to see if my timing is just off, and pretty much a few other generic three button combos that are performed when this sort of thing happens. Instead of getting into download mode, it of course just shows the battery charging.
If the phone is plugged in while it is doing its rebooting cycle then ODIN actually detects it, but I still wouldn't be able to do anything I'm sure.
Ive read through many posts about this but I just cant find anything to work at all, maybe buying a jig would be the final solution. :/
EDIT: If it helps, before flashing my captivate for the very first time a month back, i was told to check to see if I could enter into download mode and recovery safely, which I could and this was on stock rom. Ive been able to get into download/recovery with other ROMs as well, idk what's up now though
Click to expand...
Click to collapse
If you could get into download before, I don't know why you wouldn't be able to do it now. The fact that you can see the battery charging icon indicates that you should easily be able to get into download mode. Can you double check your methods and if neither work, you could always go for JIG.

you may need to buy this to get into download mode:
http://cgi.ebay.com/ws/eBayISAPI.dl...69977&ssPageName=STRK:MESELX:IT#ht_623wt_1139

just to clearify and add one more thing to try...
you are experiencing a boot-loop not brick..
ive heard of boot loop problems sometimes getting into download mode by:
remove battery
plug in usb
hold volume buttons
put in battery
(slight change on usual method)
EDIT: you may also want to try the AIO captivate toolbox in the Dev section, it can try to put your phone into download mode

I had this happen before. I did what Tresselo said and it worked.
Sent from my SAMSUNG-SGH-I897 using XDA App

plug in your usb cable. let the phone reboot and see if the comp recognizes the phone at any point during your boot loop. if it does - your in luck, sort of... I had this problem as well with the same ROM. idk if its the ROM or just me screwing up (probably me screwing up) anyhow, type this command into a command prompt (must have the android sdk and adb installed) get into the tools folder where ever that may be at for me its C:\android\tools
from this dir type this: adb reboot download - do this as soon as the comp recognizes your phone - should work.... IF the comp is seeing the phone. If its not you WILL need a JIG which can be made fairly easy.

Try adb if you haven't already. Instructions are in the stickies in the Dev section.
Sent from my Captivate using XDA App

Thanks for all the replies guys, got a good community here. Sadly no suggestions have worked at all.
jgc121 said:
plug in your usb cable. let the phone reboot and see if the comp recognizes the phone at any point during your boot loop. if it does - your in luck, sort of... I had this problem as well with the same ROM. idk if its the ROM or just me screwing up (probably me screwing up) anyhow, type this command into a command prompt (must have the android sdk and adb installed) get into the tools folder where ever that may be at for me its C:\android\tools
from this dir type this: adb reboot download - do this as soon as the comp recognizes your phone - should work.... IF the comp is seeing the phone. If its not you WILL need a JIG which can be made fairly easy.
Click to expand...
Click to collapse
I downloaded the android SDK and installed all the necessary components, as soon as I hit the right directory (for me C:\Program Files\Android\android-sdk-windows\platform-tools>adb reboot download) and I get "error: device not found". So adb seems to be running right and I may just have to get my timing right, but as of trying a good ten times I'm not having any luck.
When booting up my cap while plugged into the computer, the noise that signals a usb connection sounds and when going into device manager and looking at usb connections, its says samsung android device. Seems like I could get into download, but I guess I'll just keep trying to time it exactly right even though Ive hit the command near the connection noise every time.
I'm not losing hope, but I went ahead and ordered the jig off of ebay that mengbo posted, I'm really hoping that the jig could solve my problem for good. From your perspective guys, would the jig DEFINITELY work? Or is it just a kinda one shot, hope for the best thing?

The JIG is a pretty sure thing seeing as how you are just in a boot loop.

CCDillon, Im in the same boat as you. Same thing happened to me. I have tried a jig and it did not work for me. Hopefully it works for you. I have tried ADB also and it could not find the device. I really hope there is something out there that can help us.

aw man, that's not good at all.. hope you can find a way. Did you make a jig and were you using the same ROM?

Hopefully its just mine and the jig works for you. I didnt mean to scare you. I made a jig at first, and it kept booting the phone. Thought I didnt make it correctly so I got one off of ebay, thinking it had to work. That one did the same thing. Thought maybe it was a faulty jig and the guy I got it from ('mengbo' on this forum) sent me another one to see if that was it. The new jig he sent (that worked on his phone) did the same thing. So, something else is going on.
I was going from Phoenix 4.5 to Supernova ROM and it gave me the same error you got. Now it Boots the ATT screen then loops the Phoenix ROM logo over and over. 1 vibrate followed by 2 more

I'm hoping the JIG works for mine, otherwise I'm not sure what to do. I admit it does scare me a bit to see that you've tried all these different things with no result. I was scanning the precision thread and it seems one of the avid users/posters got caught in a boot loop and it looks like they have gotten out of it, I sent a PM so maybe I can see what that user did, though part of me is thinking that the three button method worked for him but for some reason not for me. This is very frustrating and I'll keep an update on everything, the JIG should be here in about 3 days or so.
Also, you think it may have something to do with how many times our phones have been flashed? Ive looked up to see if flashing is bad for the phones "health" but it seems flashing won't really hurt anything, nor have I really flashed too much. Btw, my phone acts the same you described as well, with the random vibrating and everything.
My mind just seems to be jumping to any random possibility, it just sucks not having a working phone.
Hope SOMETHING works for you

Seriously - you guys are all worked up over a boot loop. the JIG will put you into dl mode just fine... only time it has high chance of NOT working is if you only see black screen - no power up at all.... you can make a JIG by getting 3 - 100k ohm resistors and a 1k ohm resistor from radio shack for about $1.25... its simple.

I removed my 3 button combo accidentally by flashing att 1 click, theres an att 1 click with 3 button fix, flash that when you can get into download mode.
If you can connect with adb use it to go to download, if not, you need a jig... it works, I have been down your path!

jgc121 said:
Seriously - you guys are all worked up over a boot loop. the JIG will put you into dl mode just fine... only time it has high chance of NOT working is if you only see black screen - no power up at all.... you can make a JIG by getting 3 - 100k ohm resistors and a 1k ohm resistor from radio shack for about $1.25... its simple.
Click to expand...
Click to collapse
+1. Learn how to make the JIG you need HERE...
Or buy one from me HERE... < Shameless plug.

I was in the same situation as you guys after i had a bad flash and the loop on the bootanimation. I bought a jig online and it worked. The trick is to take out your microsd, and simcard and leave out the battery for 15 seconds. Then put back ONLY the battery in, and plug in the jig. It should turn back on and be put into download mode then flash with one click odin.

odin one click WITH 3 button fix....... saftey first.

[Q] In a LOT of trouble!

So a few days back i flashed the serendipity VII rom on to my previouly 2.2 Cappy, and it worked like a charm... a day later i was experimenting with a few ROMS all 2.3, and they worked, and to my luck I flashed a 2.2 ROM (Cognition 4) (by mistake i might add) and there it was a complete black screen brick!
since then Iv tried various methods to bring it back to life, the 3button thing, the taking the battery out holding down the 3 buttons connecting the usb and putting the battery back in, then releasing power only... Iv tried to even get it JTAGed, which was a disaster since the JTAG guy tried and cudnt get the thing to show connectivity... ANY HELP??
I fail to accept that this is the end... Please HELPP!!!!!

just keep trying to get into dl mode by using other usb ports, a jig, holding buttons while battery removed and install battery then plug in phone, happened to me plenty of times but was persistant that it finally got into dl mode.

Try making a jig and putting phone in download mode then flash stock through odin -- do a search for jig in the captivate forums. It saved me many times. You can even make one for about $1.

If you had gingerbread then you may need to use the i9000 version of entering download mode. The key combination is different. Search around on the forum as plenty have already mentioned what it is. I just don't remember off the top of my head.

if it will not power on at all....it doesnt look good.

try holding volume down and power...see if that brings up download mode. a jig is only $8 shipped to your home and will work.
i had a similar scenario and a jig brought my cappy back to life!! ive had the same phone since september, the jig has saved me from at least 8 new phones

I have seen a black screen for download mode. The only way I knew I was in download was when I saw the yellow band appear in Odin. Open Odin, and try different button combinations that will get you into download mode until you see Odin recognize your phone.

I'm sure you've tried, but these are 2 other key combos. I've had that happen to me in the past and it can be frustrating.
1. volume up + volume down
2. volume down + power
3. volume down + home (softkey) then power (this is the one that worked for me)
4. volume down + menu (softkey) then power
Hope everything works out for you. If all else fails, I'm sure a jig will work.

I learned this in the days of old, when we were flashing the baked Froyo's. Don't know if it applies or if you've tried it already, but what used to work for me was:
Open Odin
Pull the battery out, put it back in...don't turn it on.
Hold the volume down button
Plug in the usb
At no point in the process should you ever touch the power button. For your Odin version, I'd recommend using the Stock Odin, get factory and then try flashing your custom Rom again.
(Edit: I say volume down because that's the current button to enter download mode with Gingerbread. It used to be Volume Up and Down at the same time.)

ok first this does not belong in the dev section! belongs in Q&A so thing will get closed pretty soon. also other than a correct jtag u cant recover with jig, button combo or voodoo magic. u just mixed a i9000 GB bootloader along with a captivate froyo secondary boot which the Cog4 ROM has. use search and i think you can find someone who offers a jtag service

Well, I've seen a few mention it, but I think your going to need to make or puchase a jig. Hit radioshack and get 3 100kohm resistors, about $1. The directions are all over the forums here. I'd be willing to bet that will fix you up.
Also, once in a while it may still be alive even though the screen is black. Like someone else said, go ahead and start Odin, then plug your phone into USB. See if there is any response from Odin. It's worth a shot.
Either way, it's good to have a Jig handy.

claim warranty.

Odin 1 click to stock then start from scratch!

EsotericSYN said:
Odin 1 click to stock then start from scratch!
Click to expand...
Click to collapse
you need dl mode to do that, he's not even getting power up. go to att store and say it wont turn on today gimme replacement.

How did someone with just 2 posts make a thread in here? I thought you had to have 10+ posts just to post in a thread.

just contact samsung the captivate should be in warraty untill oct2011.. i also bricked my phone while on serendipity VII see Q&A Soft brick or hard Brick.i had my phone stuck on the battery charge screen. was not able to get to download mode or recovery and my battery wouldnt charge . so i called samsung just gave them my imei number and they said it was under warranty until oct 2011. i did not tell them i bricked it while flashing roms. i just told them my phone wont charge or turn on. i sent my phone to the samsung repair center in dallas tx. my phone was fix at no charge even though i had it rooted and running a custom rom. samsung just fixed my looping battery screen and put there stock froyo erasing all my apps and data.it took about 2 weeks to get all this done. got my phone back this monday and everything is working great....
so just contact samsung and say the phone wont turn on dont say you rooted it or flashed a room. samsung wont check to see if its rooted all they care about is that you didnt drop the phone or something like that.

cremefraiche said:
ok first this does not belong in the dev section! Belongs in q&a so thing will get closed pretty soon. Also other than a correct jtag u cant recover with jig, button combo or voodoo magic. U just mixed a i9000 gb bootloader along with a captivate froyo secondary boot which the cog4 rom has. Use search and i think you can find someone who offers a jtag service
Click to expand...
Click to collapse
listen to this man

Same exact thing happened to me on my last phone. Your phone is dead, dead, dead. Hard bricked. Nothing will bring it back. Take it to an AT&T store and tell them you were upgrading to 2.2 and the screen went black and now it wont come back on.
There is no jig or JTAG that will fix it, trust me, I tried

timbrendelaz said:
Same exact thing happened to me on my last phone. Your phone is dead, dead, dead. Hard bricked. Nothing will bring it back. Take it to an AT&T store and tell them you were upgrading to 2.2 and the screen went black and now it wont come back on.
There is no jig or JTAG that will fix it, trust me, I tried
Click to expand...
Click to collapse
at&t might help, but you have to hassle alot.Just contact samsung they will help for sure.i just sent them my bricked phone and they fixed it in two weeks at no charge. samsung will do it for free, im living prof.

I dont really buy into the fact that its dead, no way... its just that the revisions on the boot.bin and sbl.bin are different... shouldn't JTAG work? and cant claim warranty cuz im not in the US!!! there must be a way people.... im faar too poor to just give up without a fight!!!

[Q] another bricked captivate

i just went thru a problem with a broken power button. long story short i claimed my warranty and got a refurb. the refurb had 2.2 on it. like a jerk i thought it would be fine to use this guide ( https://docs.google.com/document/pub?id=1ItSONRa9nzI7MKeKqwIdHCTRA3RRiOM_6LcJGnK4p6Y ) just like i did with my previous phone to get miui back on my phone. i had to downgrade to 2.1 on my old phone but for some reason i thought it would be fine to use the 'safe froyo base' with my already froyo phone...
anyways i got as far as odin saying it was setting partition and it would go any further. no option but to unplug and try again. before trying i tried to boot and take a look at kies. the phone wouldnt boot. just a black screen. so.. i went ahead and tried odin again since i could still get into download mode. it still hung at the same spot. pulled the plug again and put it into download mode and got the great idea of using 1-click to go back to 2.1 stock. then it hung after, i think the 3rd message that it spits out in the log. cant remember what it said but it was a normal msg. so i pulled the plug and tried to put it into download mode again. NO LUCK. and still doesnt boot.
SO, i have a non-booting, non-download mode, non-recovery mode, no signs of life captivate...
is it a refurbished turd or is there hope with a jig or something else?
i know, long story short

those instructions were for i9000 not captivate...
odin sometimes gets stuck on set partition and i wipes the params.lfs partition where the download mode image is stored.
ill bet you 100 bucks if you restart odin. take out your battery, put back in, hold both volume buttons and plug in usb, THE SCREEN WILL NOT come on, BUT odin WILL turn YELLOW in the first box and windows will beep that it found the device.
Odin will flash with a black screen. when the flash starts, you will see a blue bar on the black screen.
use the one click stock roms in the XDA CAPTIVATE development section.
use XDA. period.

so you're saying use the same method again? or use an odin 1-click stock. 2.1, 2.2, or does it even matter? cuz im pretty sure in my rage of panic i tried both one click and full another time and nothing happened. ive got nothing to lose by trying again tho. thanks for the reply.
edit: just tried what you said with the one click i have and no go. ran odin as administrator. dont have time til after work for the full method or a different one click. but i will definatley try.

FYI, regarding your question about a jig, I just had a similar problem (thread http://forum.xda-developers.com/showthread.php?p=19581785#post19581785 I tried every option on this board and many others to get into download mode without success. The jig worked (thankfully!). might be worth trying it before giving up. as for me, no more flashing until I get Outler's Unbrickable Mod.

befreewv said:
FYI, regarding your question about a jig, I just had a similar problem (thread http://forum.xda-developers.com/showthread.php?p=19581785#post19581785 I tried every option on this board and many others to get into download mode without success. The jig worked (thankfully!). might be worth trying it before giving up. as for me, no more flashing until I get Outler's Unbrickable Mod.
Click to expand...
Click to collapse
thanks for the reply. im gonna give it a few more tries before attempting the jig. my power has been out for the last 11 hours so i havent been able to use my pc... or anything really. lost all my food in refrigerator and freezer too .
im gonna mess with this thing a bit more to see if i can make a pearl out of swine poop.

maybe someone can answer me this:
considering what i did to get the phone into this state, if i try to exchange it and tell at&t that i just powered off and it simpy wouldnt power back on is there any way for them tell if it was because of what i did?

anyone? still searching and trying to get dl mode or at least my pc/odin to recognize the device. nothing has worked yet. im downloading sdk now to try adb. i have a feeling that if adb doesnt work then AdamOutler will be $30 richer . and i have an even bigger feeling that adb will not work.

nawlage, PM sent.

4-2ndtwin said:
nawlage, PM sent.
Click to expand...
Click to collapse
thanks, just read it. the thing is, the phone has no signs of life. pbl or sbl seems to be borked but not possitive. ive heard that what i did shouldnt brick it like it has been bricked.
just tried using adb. couldnt even get to it after downloading sdk. there was a read me where adb normally is and said it was moved in the version i have. i tried to install it and it just said nothing was done. could create the directory. i gotta go to work now so i cant try anything else til i get home.

looks like im gonna try for another warranty claim on the grounds that i was putting my saved data from my old phone onto my replacement with kies when the power went out and my phone froze. pulled battery and wouldnt turn back on. if im denied then ill prolly pay for the unbrickable mod. might get the mod even if i get the warranty refurb. seems like a good investment. ill post the results. thanks to those who gave ideas.
EDIT 11/25: i ended up telling them that it worked fine when i went to bed and woke up 4 hours later and it was off and wouldnt turn on. the rep tried all the things i already tried while i snickered to myself and he said 'yeah its dead'. i got another refurb stock uckb2.