Hello,
I am hoping somebody can give me a little advice on my issue.
I updated to the OTA 2.2 via the full SBF file, i then rooted using the one click root. I then installed the 928 black glass theme that deodex's at the same time.
Everything was running fine. I them wanted to change some of the icons by modifying the framework file. I booted into recovery and created a back up before attempting to change the framework file. I them made the changes to the icons i wanted to in the framework file. a sent it back to the phone via ADB. However the phone was stuck in a boot loop. I then pulled the battery and it rebooted into recovery. I selected my backup and it started to load. The problem is it gets to where it says "Restoring Data" and it just hangs there. I let it sit at that point for over 20 min with no change. I also have tried to go into the advance recovery and just restore the data file on its own, but it also freezes.
Anyone know what might be the issue here?
Thanks
Related
2 nights ago I thought I would have a go at installing ULTIMATE ROM 3.0. I have flashed many Roms on my Galaxy S before and not had a problem yet. I have ClockworkMod Recovery 2.5.1.0 installed.
However, this time- something went wrong. I don't think the installation completed properly. When I tried to reboot the system (to go back into my previous ROM) I wasn't able to. The Samsung logo appeared before the phone booted back into Recovery mode.
I tried to re-flash my previous working update.zip but had problems. I wasn't able to properly re-flash as the Installation would abort for various reasons. After doing cache clearing and data/factory reset I still had no luck. I resorted to reformatting the sdcard. Still didn't solve the flashing problem.
Throughout the whole time I was able to adb into the phone, browse the file system and I could push files on to it and take files off. But Kies wouldn't recognise the phone and Odin isn't able to complete a transfer to the phone (not sure why).
Today, I am able to successfully flash update.zip files (at least, that's what it looks like) but the phone ALWAYS boots into ClockwordMod recovery.
I am fast running out of ideas. Does anyone have any suggestion?
How can I tell if my ROMs are really 'there' but I can't access them because ClockworkMod is preventing them from booting?
hmmm... me too.. stuck in a loop, that keeps going back to the CWM recovery menu, and no matter what i do, keeps going back to it... cant even get to the download screen to flash (again).... here i was thinking no matter what happens when installing custom roms, i can always flash to my stable secure rom, but not this time... need some software that can perform surgical operations, any suggestions?
bradels said:
2 nights ago I thought I would have a go at installing ULTIMATE ROM 3.0. I have flashed many Roms on my Galaxy S before and not had a problem yet. I have ClockworkMod Recovery 2.5.1.0 installed.
However, this time- something went wrong. I don't think the installation completed properly. When I tried to reboot the system (to go back into my previous ROM) I wasn't able to. The Samsung logo appeared before the phone booted back into Recovery mode.
I tried to re-flash my previous working update.zip but had problems. I wasn't able to properly re-flash as the Installation would abort for various reasons. After doing cache clearing and data/factory reset I still had no luck. I resorted to reformatting the sdcard. Still didn't solve the flashing problem.
Throughout the whole time I was able to adb into the phone, browse the file system and I could push files on to it and take files off. But Kies wouldn't recognise the phone and Odin isn't able to complete a transfer to the phone (not sure why).
Today, I am able to successfully flash update.zip files (at least, that's what it looks like) but the phone ALWAYS boots into ClockwordMod recovery.
I am fast running out of ideas. Does anyone have any suggestion?
How can I tell if my ROMs are really 'there' but I can't access them because ClockworkMod is preventing them from booting?
Click to expand...
Click to collapse
myrobelle said:
hmmm... me too.. stuck in a loop, that keeps going back to the CWM recovery menu, and no matter what i do, keeps going back to it... cant even get to the download screen to flash (again).... here i was thinking no matter what happens when installing custom roms, i can always flash to my stable secure rom, but not this time... need some software that can perform surgical operations, any suggestions?
Click to expand...
Click to collapse
Thats too bad guys,and i m sorry to hear that news.I would like to havean answer but i dont...
The fact is that since most people in this forum use some custom roms,and all of us think the same,that we can always go back,so it would be great if you give some more details about what happened to you,and mybe why it went wrong,and it would be even better if one of the BIG guys would give some explanation about this...
I already thinking of not updating my rom anymore,dot want to end up in looping too,so lets see if someone will find something.Good luck guys..
By the way,i didnt get it right,CWM recovery cannot load your backup????
I just got an idea,but not sure if or how it would work or not.
Since you can push file with ADB,if soeone made a clean backup with his CWM (o e mail,contacts,setting saved) and send it to you,so that you log in with CWM recovery and flash that ???
Just an idea..maybe stupid dont know...
Its not very clear if youve tried this already but cant you just boot into recovery through adb? or does that not work either?
Droid 4 running Stock Jb 4.1.2, Safestrap 3.11, Liquid smooth 2.9, CM (last stable)
Everything working fine for a number of months, installed Liquid smooth via -> delete romslot 3, create romslot 3, install Liquid 2.8.
It ran for a number of days no problems. Restarted fine, all features worked great, even the annoying random restart from 2.4 went away.
6 - 10 days in, im surfin' the news sites at work, put it down, screen goes black, i pick it up. Hit the power button cause i realize its off and it just boot loops... so bad i had to vol-/+ pwr, go to flash mode and THEN turn it off b/c it just kept trying to restart, hang on logo.
I got home and decided to AP flash the latest:
9.8.2O-72_VZW-18-2
Blur_Version.98.72.182.XT894.Verizon.en.US for the maserati.
Boot looped a few times, i was able to get it to go into recovery mode, after that it loaded up the stock JB system. First boot it crashed and restarted, second boot it loaded but only the keyboard worked, not the touch screen. Went to the in OS option of factory reset mode + delete storage.
Rebooted, worked. Checked it a few boots, everything is fine. I use Druid 4 Utility Xt894 JB version and apply the root. Works great. Install safestrap, Create new partition, install liquid smooth 2.9. Works for an afternoon... at work today the touch screen stops responding, i restart it a few times. I try to enter recovery mode. Now im in boot loop again...
I've tried re flashing it again, a few times. I tried even going down to the previous release of JB for the phone. STILL 4.1.2!!!! But nothing.... it just boot loops... what did i do wrong? It was running great. No tweaks or anything done to it prior to it having its melt down.
Help please.. ive provided as much information as possible and though i only joined XDA now to post for help, i have read it for a long time as my main source for my phone and have donated to both CM and Liquidsmooth teams previously..
help!!!
I can't see where you are doing anything wrong. You have obviously done your research and have a good idea of what you are doing. I see, after you fastbooted, you went back to Liquid. I think I would try running CM10.1 or even stock for a few days and see if you have the issue there as well. If you do than it sounds to me like it might be a hardware issue. If not, maybe try re-downloading Liquid. Perhaps your zip got corrupted somehow.
I would love too. In fact i would be willing to run it on the stock crappy 4.1.2 if i could get it out of boot loop this time...
It just keeps boot looping on the logo. AP Fashboot flash and BP flash work but recovery and normal boot/reboot mode just goes into M logo boot loop.
I've re downloaded the 4.1.2 jb SBFs from 2 different sources to ensure its not a corrupt file, tried 18_1 and 18_2 software versions...
Is there a way to use the abd shell to get into the filesystem and check whats going on? Is the SBF the last call? or is there another route to see whats going on or just flash EVERYTHING? Like completely back to stock?
I can find my way around a PC file system but im not familiar with linux. Please help me understand, Is it like having CMOS and BIOS settings or equivalent to damaged CMOS firmware? What am i not replacing/reverting by SBF and HOW can i replace/revert BEYOND the basic sbf...
If ya point me in a direction or to someone who can help me out i can do all the foot work just point me in the right direction?
Is this applicable? I found a site talking about using CWM in a ADB shell file push to possibly get access to more features?
The article also goes into reading the busybox / ADB command screen? (sorry for not proper jargin) and see what its doing during the boot loop before it restarts?
Id add the link but i need more posts....
Update: Flashed 18_2 again with a "factory cable" i made, let it boot loop a series of times before it started up into the stock system again.
At first, again the touch screen wouldn't work, random lockups and restarts, etc. Since i just got it into the main system again and i had to leave for the weekend for a trip(no wifi or network), i couldn't mess with it all weekend but i left it on the whole time and kept checking its functionality... gradually its come back to full function. Touch screen works and is accurate, no more lockups, no more restarting, even stopped boot looping when i restart and enter recovery..
Im not sure and i couldn't find any forum converstations or write ups to support to idea but i think after a major crash and you flash new or reflash your SBF, it seems the phone needs time to recalibrate and index? Not sure, but just an FYI. Gonna try loading SS and liquid again.
So I just got a message for an OTA update and I tried to install it. During the installation, the phone aborted it and asked me if I wanted to reboot. What I didn't realize was that the system UI was deleted so that the new update could replace it. When I rebooted my phone it started up normally but then went into is a blue screen. I tried to reboot the system again in recovery mode but it won't go into it. Is there anyway I can fix this?
EDIT
I got into the recovery and tried to do a sideload to see if I could get a rom onto the phone but my phone won't connect to the computer. If anyone knows of something I could try, it would be much appreciated.
Hey guys, just a heads up, I've been a anon on this site for a while, but had to sign up after getting some trouble to post.....
Anyways, just got a fresh root on my HTC One. And before someone asks if its fully rooted or not, yes it is. No partials here. I saved a backup just incase using twrp and have it unless I get further problem.......To the real issue.....I installed the Xposed Installer 2.6.1 apk from the link, and after installing, and opening, it says that it isn't up to date in red text and needs the framework. I attempted to update it through the app, SuperSU asks access to be granted and it reboots. I know I am supposed to hit a screen where the update, and framework is installed, but nada. After everything is back on, Xposed Installer shows the same red text as before. I have restored the backup, re-done the root, and even tried installing 2.6 and 2.5.1 They all throw up the same thing. The framework isn't installed and upon attempting, it asks for access, then promptly reboots. Any help at all would be appreciated! Thanks ahead of time!
Sounds like HTC has protected the /system partition and reboots whenever an app tries to write to it. You could try selecting a different installation mode (via recovery) and see if that works better.
This is my backup phone so I don't care for the data that is on it and just want it working again. It was rooted before and I needed it unrooted in order to download an app that was blocked by root detection. I tried uninstalling the root using Super SU in its settings, when I restarted my phone it just freezes at the AT&T white screen.
I'm still able to go into the boot recovery menu, I tried putting on the I537UCUCOC7 (5.0.1) firmware found here (https://forum.xda-developers.com/showthread.php?t=2629093). I downloaded it, extracted the zip, and renamed the file "update.zip" and put the file on a microSD then in the recovery boot menu I went to install from external and selected the update.zip. It sorta kinda looked like it accepted it but I get a red error message about the sideloader and I'm still stuck at the white screen when it boots.
What else can I do from here?
P.S. I already tried wiping the cache and data/factory restore options and that didnt work.
Is there anything else that can be done?
I restored my phone to 4.4.2. How can I install 5.0.1? When I search for software updates it says theres nothing available even though I know it can go to 5.0.1 cause thats what I had before it bricked.
Please share how did you restore when I only able to boot into recovery and clearing cache and factory reset does not help. Phone just stack on boot loop
RemixDeluxe said:
I restored my phone to 4.4.2. How can I install 5.0.1? When I search for software updates it says theres nothing available even though I know it can go to 5.0.1 cause thats what I had before it bricked.
Click to expand...
Click to collapse
alex4cta said:
Please share how did you restore when I only able to boot into recovery and clearing cache and factory reset does not help. Phone just stack on boot loop
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-s4-active/general/guide-update-to-i537-att-firmware-t2835481