Database Develop

[Q] Flashing to Froyo Issue

My Phone: Stock Eclair 2.1 JH7 update Build 1006
(amazingly no GPS or shutdown issues)
Rooted
Voodoo Lagfix
That's It.
I read alot on here about upgrading to Froyo, regarding having to un-root and stopping lag fix. I could not figure out how to stop lagfix, which I figured I had to be rooted to do so, so I just didn't un-root either. So my mistake I just said F-It and started Kies Mini and plugged in my phone. My firmware updated and my phone rebooted, however it gets to the Galaxy S screen, and instead of booting up my screen goes black and nothing happens, like it shuts off. So, what should I do from here, as this is my only phone, and I don't have readily available access to a computer.

get to the download mode and reflash to stock using odin.

well that's what I was thinking of doing, however. it seems I can only boot into recovery mode. Vol. Down button and Power button. The three button combo seems to do nothing for me, don't know why. So how do I get into Download mode? My first phone WAS the three button combo.

ConeyKiller said:
well that's what I was thinking of doing, however. it seems I can only boot into recovery mode. Vol. Down button and Power button. The three button combo seems to do nothing for me, don't know why. So how do I get into Download mode? My first phone WAS the three button combo.
Click to expand...
Click to collapse
the key combo may not work on certain build phone. if it happens to your phone, you have to build a jig yourself or buy one (i can send you one, PM me).

ConeyKiller said:
well that's what I was thinking of doing, however. it seems I can only boot into recovery mode. Vol. Down button and Power button. The three button combo seems to do nothing for me, don't know why. So how do I get into Download mode? My first phone WAS the three button combo.
Click to expand...
Click to collapse
fire up ODIN 1-CLICK
connect USB to Computer
remove battery from phone
replace battery
hold down both volume buttons
insert micro USB into phone
*DOWNLOAD MODE!*

Well I sure do appreciate that offer. Vol. Up & Vol. Down button with ODIN open and Then plugging in USB got me to download mode. heh I pushed Master Clear, so we'll see what happens.

THANKS!
I figured that out right before you posted it! you Canadians are alright. lol
I would give you a thanks, but I can't find the button for you!
clemmie said:
fire up ODIN 1-CLICK
connect USB to Computer
remove battery from phone
replace battery
hold down both volume buttons
insert micro USB into phone
*DOWNLOAD MODE!*
Click to expand...
Click to collapse

Been about 15 mins since hitting Master Clear phone still says Downloading... Do not turn off target. I forget, having only flashed once to the leaked, does it usually take this long?

ConeyKiller said:
Been about 15 mins since hitting Master Clear phone still says Downloading... Do not turn off target. I forget, having only flashed once to the leaked, does it usually take this long?
Click to expand...
Click to collapse
you cannot be in the download mode if you just want to do a master clear. boot the phone normally, enable the debug mode and do the master clear using odin there.

No it shouldn't. Another thing that helped was to install the driver package that is included in the Original Post for 1-click. If that still doesn't work after 5 or so minutes, unplug and try again, but this time just go for the ROM flash. You should see the blue status bar moving on the phone. I had the same issue. This took me a few tries.

well odin now says Removed! like i'm supposed to celebrate. phone still says downloading.. lol I guess I should have hit START instead.

Thanks so much clemmie. phone is back to stock you can master clear in download mode, just takes 20 mins. lol I hit start instead and it put me back to the stock jf6. now time to get froyo wee! thanks alot guys, thread can be closed and deleted if you would like.

[Q] Stuck on clockworkmod

Hi
I tried to remove Bejeweled using a program I downloaded (I can't remember the name). It said it would reboot twice, but it seemed to have frozen after the first reboot, so I pulled the battery.
Now, every time I try to turn the phone on, it goes into ClockworkMod 2.5.1.0 and stays there. None of the buttons do anything at all, so I can't get to any of the options.
Samsung Kies and Odin 3 don't seem to recognise the phone when I plug it in by USB and I can't find any button combinations that stop it going to ClockworkMod.
I only got the phone a few days ago, so I'm not sure if I can send it back and claim the Froyo update on Kies broke it. I would prefer to fix it myself though. Is there a way to do this?
Thanks in advance.

So can you get into download mode or not?

No, I can't get to anything other than clockworkmod, and that freezes.

When I plug the usb lead in, it turns on without pressing the power button, but still freezes at clockworkmod. Hope that helps.

ld9211 said:
When I plug the usb lead in, it turns on without pressing the power button. Hope that helps.
Click to expand...
Click to collapse
GOOD
What you want to do is, pull battery out, put it back in, Hold volume down and Home button, THEN put in the usb lead, That should put you into download mode, then you can flash thru odin

Pull ur battery so phone is completely dark hold the 3 button combo for the download mode the phone should power in download mode or last option is get a jig for a pound on ebay
Sent from my GT-I9000 using Tapatalk

Thanks for your help. When I tried azzledazzle's solution, it went to frozen clockworkmod again, but the Galaxy S screen at the start doesn't show. Also, my version has never responded to any key combos, even when it worked.
I have attached a picture of what Odin shows when I put the USB lead in. Not sure if I can do anything with it. By the way, I've never used Odin before so I don't know if there are any settings I need to change.
I'll order one of those 'jigs' but hopefully I can get it fixed before that arrives.

you have selected 512 pit, but you havent ticked re-partition, that is whats causing your problem.
you say your phone never responded to button combo's. does that mean you have never been in download mode ??

The 'jig' has arrived and put me straight into download mode! Definitely recommended for anyone who can't use the three button combos. I have used a new rom with the 512 pit and repartition unchecked, and Android 2.2.1 installed fine. This also solved the button combo problem.
In reply to azzledazzle, the only time I saw download mode before the jig arrived was when Kies mucked up an update.

[Q] I think I bricked my Captivate flashing Serendipity

I had Cognition 4 flashed but had a problem that whenever the battery was removed when the phone was on, about half of my apps, wifi, and texting would force close on reboot and never be able to open until I reflashed Cogntion. Because of this, I decided to try Serendipity VII. I put the zip file on my phone, rebooted into recovery, then tried to do the same thing that I did for Cognition. When I did this it said that it was installing, then said install complete without rebooting. I decided to reboot the phone, and when I tried, it keeps looping on the att screen. I do not see the battery charge signal when I plug it in. I see a loading gear for the battery for about five seconds, then the screen has electric looking blue lines flash through the center and then nothing. I cannot boot into recovery or download, it just keeps looping on the ATT screen.

Make or buy a jig to force it into download mode.
Sent from 234 Elm Street

slow_DC4 said:
Make or buy a jig to force it into download mode.
Sent from 234 Elm Street
Click to expand...
Click to collapse
How do I force it into download mode?

So you tried flashing a GB rom without first flashing GB bootloaders?
You should have read and followed the installation instructions on the Serendipity download page. Start Odin one click,see if you can get phone into download mode by any combo and see if Odin sees it. Flash stock and start again.
*If you're not on Gingerbread, you should be shot*

cappysw10 said:
So you tried flashing a GB rom without first flashing GB bootloaders?
You should have read and followed the installation instructions on the Serendipity download page. Start Odin one click,see if you can get phone into download mode by any combo and see if Odin sees it. Flash stock and start again.
*If you're not on Gingerbread, you should be shot*
Click to expand...
Click to collapse
Ya, I had a feeling I should have read more about it, but I was anxious and stupid. I didn't do any of those things. No matter what I try I can't get to recovery. How would I get into download?

JIG
10 char

Thanks for all the help, I will be buying a jig from amazon for about ten bucks. I hope this works. But if it doesn't, at least this will teach me to read instructions before doing something that I don't understand very well.

to get into download mode press volume down instead of volume up to get u into recovery, at first i screwed up too somewhat like you so what i did is removed the battery for a minute, put it back in press volume down middle and power button to get into download then use odin to flash a new 2.3.4 gingerbread that u can get from this forum just look through and ull find it, make sure u put the pit file phone file, pda and csc files and make sure u check the repartition auto reboot and freset time checked on then press start hope it helped

srkoza said:
to get into download mode press volume down instead of volume up to get u into recovery, at first i screwed up too somewhat like you so what i did is removed the battery for a minute, put it back in press volume down middle and power button to get into download then use odin to flash a new 2.3.4 gingerbread that u can get from this forum just look through and ull find it, make sure u put the pit file phone file, pda and csc files and make sure u check the repartition auto reboot and freset time checked on then press start hope it helped
Click to expand...
Click to collapse
Ya, holding the volume button in any combination does noting, I hope a jig will fix it. But thanks anyway

jmj45 said:
Ya, holding the volume button in any combination does noting, I hope a jig will fix it. But thanks anyway
Click to expand...
Click to collapse
Sir try this one last thing, remove your USB Cable from your PC, remove your battery...
While holding down both (Up and Down) volume buttons, insert the battery and THEN connect your phone to your PC through USB, see if this puts it into Download mode.
If not, try doing the same just holding down the DOWN volume button. Hope this helps, it seems as if these combinations kind of vary from phone to phone. Cheers

Mr. Janderson said:
Sir try this one last thing, remove your USB Cable from your PC, remove your battery...
While holding down both (Up and Down) volume buttons, insert the battery and THEN connect your phone to your PC through USB, see if this puts it into Download mode.
If not, try doing the same just holding down the DOWN volume button. Hope this helps, it seems as if these combinations kind of vary from phone to phone. Cheers
Click to expand...
Click to collapse
I tried this and all it did was do the att loop screen thing. Also, my computer dinged that it saw a usb device being plugged in, but then the restart loop restarts the phone and continues this indefinitely. Thanks for the help anyway.

You don't need to buy a jig, just go do that thing where you get three (or four) resistors in series that totals 301k ohms and touch them to specific contacts in the usb port of your phone... look it up on xda, it's worked for most people.

abmicyau said:
You don't need to buy a jig, just go do that thing where you get three (or four) resistors in series that totals 301k ohms and touch them to specific contacts in the usb port of your phone... look it up on xda, it's worked for most people.
Click to expand...
Click to collapse
Thanks, but I already screwed up my phone by doing something that I did not fully understand, it's a small wonder that I can use Linux and not be too confused. I think I will take the easy way out with this one.

Hmm I remember that often when I tried to put my phone into recovery mode or download, whenever I held the Power Button down, it would just keep looping. When you but the battery on and connect your phone, make sure you are not holding the Power button, just the volume ones. Perhaps it is your case?

Mr. Janderson said:
Hmm I remember that often when I tried to put my phone into recovery mode or download, whenever I held the Power Button down, it would just keep looping. When you but the battery on and connect your phone, make sure you are not holding the Power button, just the volume ones. Perhaps it is your case?
Click to expand...
Click to collapse
It loops if whether or not I hold any buttons down. If I hold the power button down while trying to get into download mode, then it just turns it off.

Turn off the phone, remove the battery, get a stock odin one click for the captivate.
I897UCJF6-final-OCD-REV0 seems to be a reliable flash when I run into trouble.
Start odin, plug the phone into the USB cable, hold the volume up/down key or try any combination up/down or both. Insert the battery and hopefully it will go into download mode.
Been reliable so far...

Hi. I'm unable to get into recovery mode after I flashed the Talon kernel as per the instructions here.
http://www.team-continuum.net/forum...ses/(guide)general-installation-instructions/
I'm consistently able to get into download mode and reflashed the talon 0.1.2 kernel as per the instructions there, but still to no avail. Any other suggestions to get my phone into CWM ?
Im trying to flash Continuum 6

Might as well get the Jig easy Download mode xD. I made mine myself cost a whole $2.50 for one xD

I think I just bricked my phone

I recently got a Captivate for my sister and decided to root it using AIO program from the development section. After rooting the phone and installing CWM I tried to flash Apex 9 ROM. Since I'm used to my Inspire ROMs that will automatically wipe the phone before flashing I flashed it on top of the Stock ROM which resulted on the screen becoming glitchy. Removed the battery and tried to reboot the phone but it just keeps on bootlooping. Tried to start CWM but the phone won't do it. Tried getting into download mode by holding the volume up + down button and plug in the usb cable but it freezes. I'm desperate. Has anyone else experienced something like that before?

guido3300 said:
I recently got a Captivate for my sister and decided to root it using AIO program from the development section. After rooting the phone and installing CWM I tried to flash Apex 9 ROM. Since I'm used to my Inspire ROMs that will automatically wipe the phone before flashing I flashed it on top of the Stock ROM which resulted on the screen becoming glitchy. Removed the battery and tried to reboot the phone but it just keeps on bootlooping. Tried to start CWM but the phone won't do it. Tried getting into download mode by holding the volume up + down button and plug in the usb cable but it freezes. I'm desperate. Has anyone else experienced something like that before?
Click to expand...
Click to collapse
How can I get in straight into CWM? If I could get there I could just wipe the data and flash a different ROM and I know i'd be good. But right now I don't know what else to do

Before you do anything else, stop and read the op for the rom you're trying to flash. Apex 9.x needs GB bootloaders first. Try holding vol down while inserting the usb cord.
If this works, use odin1click and flash back to stock eclair.
Unfortunately, you learned the hard way that flashing a Captivate is different from flashing an Inspire.
Please, for the sake of all of the devs, mods, and more experienced flashers, please read the posts.
And get yourself a jig.
Sent from my GT-I9000 using XDA App

bornjamerican said:
Before you do anything else, stop and read the op for the rom you're trying to flash. Apex 9.x needs GB bootloaders first. Try holding vol down while inserting the usb cord.
If this works, use odin1click and flash back to stock eclair.
Unfortunately, you learned the hard way that flashing a Captivate is different from flashing an Inspire.
Please, for the sake of all of the devs, mods, and more experienced flashers, please read the posts.
And get yourself a jig.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Yeah, sucks for me. I tried holding down the volume buttons. It just won't work. All I see is a a round sun, like when a flash website is loading, but nothing else happens. I'm reading about the jig but I already own a cheap micro usb cable, I don't have a solder. Why does it have to be so complicated? In the Inspire when something goes bad you just boot into CWM and do a nandroid restore but in this I can't even access CWM. Just tell me one thing. Is it fixable?

guido3300 said:
Yeah, sucks for me. I tried holding down the volume buttons. It just won't work. All I see is a a round sun, like when a flash website is loading, but nothing else happens. I'm reading about the jig but I already own a cheap micro usb cable, I don't have a solder. Why does it have to be so complicated? In the Inspire when something goes bad you just boot into CWM and do a nandroid restore but in this I can't even access CWM. Just tell me one thing. Is it fixable?
Click to expand...
Click to collapse
It is fixable, it just may take some legwork and a little money.
Have you tried taking out the battery, holding V+/V-, inserting USB cable, and then putting battery back in (that's the alternate froyo/eclair combo)?
If you hold Vol- and power (no USB insertion), you might get download mode (that's the GB combo).

jmtheiss said:
It is fixable, it just may take some legwork and a little money.
Have you tried taking out the battery, holding V+/V-, inserting USB cable, and then putting battery back in (that's the alternate froyo/eclair combo)?
If you hold Vol- and power (no USB insertion), you might get download mode (that's the GB combo).
Click to expand...
Click to collapse
Not working. If I plug the usb I get the damn sun. If I press the power button it will just start booting ove and over again. I think I just screwed up. I just can't understand how flashin a rom can mess up the download mode. Doesn't make any sense.

On I9000 gb bootloaders, volume down + power is download mode
Sent from my Cappy at 1.6 GHz, V6 supercharger, KAK tweaks, and 3G booster using the XDA Premium App!

guido3300 said:
Not working. If I plug the usb I get the damn sun. If I press the power button it will just start booting ove and over again. I think I just screwed up. I just can't understand how flashin a rom can mess up the download mode. Doesn't make any sense.
Click to expand...
Click to collapse
My initial guess is that you may have gotten a phone with the 3-button issue. Before you flashed, were you able to confirm that download mode and CWM were reachable with button combos?
Just to make sure we've covered all the steps, what button combination did you try to use to get to CWM? The only thing I can think that's happening right now is that the kernel you're using is for Gingerbread, and because that's not lining up right, it won't let you get to CWM. That doesn't explain the download mode issue, though, which leads me to believe it may be the 3-button phone issue.
Something you might be able to try is to grab the Android SDK and use the adb tool to force your phone into download mode. It might take a few tries, but it's possible.
The other option is to buy/make a jig. That's pretty much 100% guaranteed to get you to download mode.

jmtheiss said:
My initial guess is that you may have gotten a phone with the 3-button issue. Before you flashed, were you able to confirm that download mode and CWM were reachable with button combos?
Just to make sure we've covered all the steps, what button combination did you try to use to get to CWM? The only thing I can think that's happening right now is that the kernel you're using is for Gingerbread, and because that's not lining up right, it won't let you get to CWM. That doesn't explain the download mode issue, though, which leads me to believe it may be the 3-button phone issue.
Something you might be able to try is to grab the Android SDK and use the adb tool to force your phone into download mode. It might take a few tries, but it's possible.
The other option is to buy/make a jig. That's pretty much 100% guaranteed to get you to download mode.
Click to expand...
Click to collapse
Gosh! 3 buttons issue! What other issues could this phone have? I have the worst luck ever!
I tried all of the buttons combinations: holding volume up and down and pressing power button, volume up only and power button, volume down only and power button. Volume up and down + pluging usb. And same with one button only. I think I might get a jig and go **** myself because this phone got on my nerves. But before, how can I use adb to force the phone into download mode if there is no phone-pc conection at all? The won't even turn on. Would it work if I use it while the sun appears?

guido3300 said:
Gosh! 3 buttons issue! What other issues could this phone have? I have the worst luck ever!
I tried all of the buttons combinations: holding volume up and down and pressing power button, volume up only and power button, volume down only and power button. Volume up and down + pluging usb. And same with one button only. I think I might get a jig and go jig myself because this phone got on my nerves. But before, how can I use adb to force the phone into download mode if there is no phone-pc conection at all? The won't even turn on. Would it work if I use it while the sun appears?
Click to expand...
Click to collapse
I know this is exceptionally frustrating - I've been there myself. All I can say is to be persistent, and you'll get it back to good working order.
When you plug the phone into your computer's usb port, as long as the phone shows some sort of response (even if it's just the charge screen), it's likely to have a connection for data use as well. If you can get your phone bootlooping while you have ADB open, you might be able to issue the "adb reboot download" command in that brief window and get to where you're going without a jig.
One other item to try - One Click Unbrick. With this one, you'd start the phone up bootlooping and run it (I think). With any luck, it might get you somewhere you can get to download mode (or have a wider window with ADB).
And it probably won't work while the sun's showing, as it hasn't really booted up yet, although there's definitely no harm in trying.

i was reading over this and i got my phone into download mode but odin doesnt work

Seikei925 said:
i was reading over this and i got my phone into download mode but odin doesnt work
Click to expand...
Click to collapse
Are you getting your phone to download mode first, then opening Odin on your computer, and then connecting it?

jmtheiss said:
Are you getting your phone to download mode first, then opening Odin on your computer, and then connecting it?
Click to expand...
Click to collapse
Yes i have done that

Seikei925 said:
Yes i have done that
Click to expand...
Click to collapse
Have you tried changing the USB port you're plugging into? It would be best to use one that's directly connected to the motherboard (not on the front of the PC).
Also, are you using a PC, Mac, or Linux machine?

jmtheiss said:
Have you tried changing the USB port you're plugging into? It would be best to use one that's directly connected to the motherboard (not on the front of the PC).
Also, are you using a PC, Mac, or Linux machine?
Click to expand...
Click to collapse
Im using a PC Windows 7, also i cannot boot into CWM, but phone can boot up fine just not recognized by the computer.

Seikei925 said:
Im using a PC Windows 7, also i cannot boot into CWM, but phone can boot up fine just not recognized by the computer.
Click to expand...
Click to collapse
Have you tried reinstalling the drivers on the computer side? If it's not recognizing it at all, that's one possibility. Another is a bad USB cable.

jmtheiss said:
Have you tried reinstalling the drivers on the computer side? If it's not recognizing it at all, that's one possibility. Another is a bad USB cable.
Click to expand...
Click to collapse
Try installing drivers from the AIO toolbox, it worked great for me
Sent from my Cappy at 1.6 GHz, V6 supercharger, KAK tweaks, and 3G booster using the XDA Premium App!

jmtheiss said:
Have you tried reinstalling the drivers on the computer side? If it's not recognizing it at all, that's one possibility. Another is a bad USB cable.
Click to expand...
Click to collapse
Tried re installing drivers several times and have used 4 different USB cables.

Seikei925 said:
Tried re installing drivers several times and have used 4 different USB cables.
Click to expand...
Click to collapse
What Rom/Kernel are you on?

My phone is in the same condition at this moment, and also has the 3 keys combination locked, im w8ing for get a profesional jig because i made one and didnt work. But if the pc recognize the phone u can try with the One click unbrick as jmtheiss said.

[Q] Totally bricked

I put my build number 1106 captivate into total brick mode trying to go to ICS with odin3 one click.. that was a mistake and it put that into a boot loop. I used a jig and got it into download mode, and used Heimdall oneclick because people all over this site fixed theirs with that method. I didnt know this build number made a difference and now i have the phone-!-computer screen. I can't get it to go into download mode even with three different jigs. I have no idea what to do, and any answers would be appreciated.

Not sure if you tried this already or not but I had something similar happen to me before: A method to get it into download mode is to (while the phone is off) hold only the volume up and down buttons, then, while holding the two buttons down, connect the micro usb cable.
This should bring the phone straight into download mode.

bluDog said:
Not sure if you tried this already or not but I had something similar happen to me before: A method to get it into download mode is to (while the phone is off) hold only the volume up and down buttons, then, while holding the two buttons down, connect the micro usb cable.
This should bring the phone straight into download mode.
Click to expand...
Click to collapse
Is this with battery in or out?

You can try either way. I have done it with the battery in. However I don't remember if I did it with or without the battery when I did it when my phone was bricked.
Try it out without the battery first.

Isnt that like doing it the regular way? It goes straight to that screen still..

[email protected] said:
Isnt that like doing it the regular way? It goes straight to that screen still..
Click to expand...
Click to collapse
That screen IS download mode
Sent from my ICS Samsung Captivate

Having same issue
I've followed all of the suggested solutions and still have the phone + ! + computer screen. Cannot get anything else. Any other ideas?
thanks in advance

korockinout13 said:
That screen IS download mode
Sent from my ICS Samsung Captivate
Click to expand...
Click to collapse
He is right.
From the land of defrag

matwheeler said:
I've followed all of the suggested solutions and still have the phone + ! + computer screen. Cannot get anything else. Any other ideas?
thanks in advance
Click to expand...
Click to collapse
Jig --- make or buy one.
Check my sig link below for directions on where to look for both.

I've had a similar situation, the download mode screen didn't show but some screen did. I pulled my battery, then I used an odin one-click and held the up and down volume keys and plugged in the usb cable, then my battery. The com lit up on odin, and I went ahead and flashed anyway and it worked.

I remember Adam outin saying that you can flash with phone plus computer screen. It has to do with download mode alternate image. Just flash as if in regular download mode even if Odin doesn't see it
Sent from my SGH-I897 using xda premium

I agree with the previous replies. I don't think your phone is "totally bricked", as you say. I'd suggest trying to flash back to original settings with Odin, after getting into download mode by removing the battery, holding down both volume buttons, and plugging in the USB cable. That method has worked for me several times in the past, and I hope it will work for you. Good luck!
Also, when you get back to original settings, depending on your software version, you may want to update incrementally using Samsung Kies to the software version right before the one you want to flash to, because some devices (perhaps most) will not let you update the firmware from 2.1 (Eclair) right to Gingerbread, for example, without first updating to 2.2 (Froyo).
Again, best of luck. Hope you are able to get it unbricked.